Alejandro Pérez-Ramos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Alejandro Pérez-Ramos has a total of 96 co-authors. Here are the top co-authors by number of shared publications:
- Borja Figueirido
Departamento de Ecología y Geología, Facultad de Ciencias, Universidad de Málaga, Málaga, Spain
10 shared publications - Jorge Morales
Departamento de Paleobiología, Museo Nacional de Ciencias Naturales-CSIC, C/ José Gutiérrez Abascal 2, 28006 Madrid, Spain
6 shared publications - Juan Abella
Grup d'Investigació en Paleontologia de Vertebrats del Cenozoic (PVC‐GIUV), Departament of Botànica i Geologia Universitat de València Valencia 46100 Spain
6 shared publications - Juan Francisco Pastor
Department of Anatomy and Radiology University of Valladolid Valladolid Spain
6 shared publications - Alberto Valenciano
Departamento de Geodinámica, Estratigrafía, Paleontología, Universidad Complutense de Madrid, Madrid, Spain
5 shared publications - Alberto Martín-Serra
Departamento de Ecología y Geología, Facultad de Ciencias, Universidad de Málaga, Málaga, Spain
3 shared publications
Latest Publications
- 16 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 393 (6808) , 265-271
Performance trade-offs define a fundamental dental dichotomy in mammals
Teeth define mammalian evolution, and one of many adaptive dental breakthroughs in crown mammals is the tribosphenic molar: a tooth with a dual shearing-crushing function, often considered a key adaptation in crown mammals. However, we do not know how potential trade-offs between these antagonistic functions may influence the macroevolutionary outcomes of mammalian lineages. Here, we show that predatory mammals evolved dichotomized performance in their tribosphenic carnassial teeth, with slicing constrained to a narrow set of optimal phenotypes and crushing exhibiting redundant solutions. Less than 1% of predators evolved optimized shearing and crushing. The fundamental trade-off in functions of the tribosphenic architecture promoted divergent macroevolutionary specializations rather than functional duality. These results highlight how key innovations can drive early evolutionary success while simultaneously constraining subsequent diversification.
- 16 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 393 (6808) , 265-271
Performance trade-offs define a fundamental dental dichotomy in mammals
Teeth define mammalian evolution, and one of many adaptive dental breakthroughs in crown mammals is the tribosphenic molar: a tooth with a dual shearing-crushing function, often considered a key adaptation in crown mammals. However, we do not know how potential trade-offs between these antagonistic functions may influence the macroevolutionary outcomes of mammalian lineages. Here, we show that predatory mammals evolved dichotomized performance in their tribosphenic carnassial teeth, with slicing constrained to a narrow set of optimal phenotypes and crushing exhibiting redundant solutions. Less than 1% of predators evolved optimized shearing and crushing. The fundamental trade-off in functions of the tribosphenic architecture promoted divergent macroevolutionary specializations rather than functional duality. These results highlight how key innovations can drive early evolutionary success while simultaneously constraining subsequent diversification.
- Open Access
- 20 May 2026
- Published by Springer Nature in Journal of Mammalian Evolution
- Vol. 33 (2) , 23
Virtual reconstruction and morphometric analysis of the vertebral column of the stem sirenian Pezosiren portelli (Tethytheria, Pan-Sirenia, Prorastomidae)
In this study, we virtually reconstruct the vertebral column of Pezosiren portelli , a four-limbed stem sirenian (Pan-Sirenia, Prorastomidae) from the Eocene of Jamaica. We used three-dimensional models of various vertebrae obtained through surface scanning of fossil remains and we applied several algorithms for virtual repair, including retrodeformation of distorted vertebrae or mirroring missing processes from their bilateral counterparts. To quantify the regional morphology of P. portelli , we digitized a set of homologous landmarks, following a standardized protocol retrieved from previous morphometric studies on the evolution of the mammalian backbone. The results reveal a cervical region with relatively long spinous processes, as well as a thoracic region subdivided into prediaphragmatic and postdiaphragmatic regions with an unspecialised lumbar region. Both aspects reveal anatomical traits typical of terrestrial mammals, suggesting that P. portelli may exhibit a mosaic evolutionary pattern, showing postcranial traits typical of terrestrial taxa but also early aquatic adaptations found in its cranial skeleton. Finally, we briefly discuss the implications of morphometric analyses of the P. portelli vertebral column for understanding the evolution of axial features in other secondarily aquatic tethytherians.
- 20 May 2026
- Published by Springer Nature in Journal of Mammalian Evolution
- Vol. 33 (2) , 23
Open AccessVirtual reconstruction and morphometric analysis of the vertebral column of the stem sirenian Pezosiren portelli (Tethytheria, Pan-Sirenia, Prorastomidae)
In this study, we virtually reconstruct the vertebral column of Pezosiren portelli , a four-limbed stem sirenian (Pan-Sirenia, Prorastomidae) from the Eocene of Jamaica. We used three-dimensional models of various vertebrae obtained through surface scanning of fossil remains and we applied several algorithms for virtual repair, including retrodeformation of distorted vertebrae or mirroring missing processes from their bilateral counterparts. To quantify the regional morphology of P. portelli , we digitized a set of homologous landmarks, following a standardized protocol retrieved from previous morphometric studies on the evolution of the mammalian backbone. The results reveal a cervical region with relatively long spinous processes, as well as a thoracic region subdivided into prediaphragmatic and postdiaphragmatic regions with an unspecialised lumbar region. Both aspects reveal anatomical traits typical of terrestrial mammals, suggesting that P. portelli may exhibit a mosaic evolutionary pattern, showing postcranial traits typical of terrestrial taxa but also early aquatic adaptations found in its cranial skeleton. Finally, we briefly discuss the implications of morphometric analyses of the P. portelli vertebral column for understanding the evolution of axial features in other secondarily aquatic tethytherians.
- Open Access
- 1 April 2025
- Published by Universitat de Valencia in Spanish Journal of Palaeontology
- Vol. 40 (1) , 147-167
Una mirada histórica al descubrimiento, estudio e interpretación de Megatherium americanum Cuvier, 1796: el caso particular del megaterio de Valencia
Se presenta una breve visión histórica del descubrimiento, estudio, interpretación y repercusión popular de la especie Megatherium americanum Cuvier, 1796 (Mammalia, Xenarthra, Megatheriidae), principalmente de dos esqueletos montados en España desde antiguo. El ejemplar exhibido en el Museo de Ciencias Naturales de Valencia (España), que forma parte de la colección traída por Rodrigo Botet en 1898 de Argentina, representa uno de los especímenes más completos y emblemáticos que se han recuperado de esta especie de la megafauna sudamericana del Pleistoceno. Este coloso terrestre, un herbívoro especializado, es conocido por su robustez ósea y requerimientos biomecánicos especiales para soportar su gran masa corporal. Varias investigaciones han demostrado su capacidad para adoptar posturas bípedas ocasionales, utilizando su cola y extremidades posteriores como soporte, lo que le permitía acceder a vegetación elevada. Además, su musculatura desarrollada y garras largas le facilitaban alcanzar recursos tróficos como raíces, por medio de actividades fosoriales, y brotes de ramas altas, y le servían para la defensa contra depredadores. Estudios recientes sobre su microestructura ósea han revelado una intensa remodelación, acorde con las demandas biomecánicas que se derivaban de su locomoción y tamaño. El espécimen presente en Valencia es un testimonio clave de los avances en paleontología, y continúa enriqueciendo nuestra comprensión biológica de la evolución de los Xenarthra.
- 1 April 2025
- Published by Universitat de Valencia in Spanish Journal of Palaeontology
- Vol. 40 (1) , 147-167
Open AccessUna mirada histórica al descubrimiento, estudio e interpretación de Megatherium americanum Cuvier, 1796: el caso particular del megaterio de Valencia
Se presenta una breve visión histórica del descubrimiento, estudio, interpretación y repercusión popular de la especie Megatherium americanum Cuvier, 1796 (Mammalia, Xenarthra, Megatheriidae), principalmente de dos esqueletos montados en España desde antiguo. El ejemplar exhibido en el Museo de Ciencias Naturales de Valencia (España), que forma parte de la colección traída por Rodrigo Botet en 1898 de Argentina, representa uno de los especímenes más completos y emblemáticos que se han recuperado de esta especie de la megafauna sudamericana del Pleistoceno. Este coloso terrestre, un herbívoro especializado, es conocido por su robustez ósea y requerimientos biomecánicos especiales para soportar su gran masa corporal. Varias investigaciones han demostrado su capacidad para adoptar posturas bípedas ocasionales, utilizando su cola y extremidades posteriores como soporte, lo que le permitía acceder a vegetación elevada. Además, su musculatura desarrollada y garras largas le facilitaban alcanzar recursos tróficos como raíces, por medio de actividades fosoriales, y brotes de ramas altas, y le servían para la defensa contra depredadores. Estudios recientes sobre su microestructura ósea han revelado una intensa remodelación, acorde con las demandas biomecánicas que se derivaban de su locomoción y tamaño. El espécimen presente en Valencia es un testimonio clave de los avances en paleontología, y continúa enriqueciendo nuestra comprensión biológica de la evolución de los Xenarthra.
- Top Cited PapersOpen Access
- 18 January 2025
- Published by Springer Nature in Communications Biology
- Vol. 8 (1) , 1-12
Cortical areas associated to higher cognition drove primate brain evolution
Although intense research effort is seeking to address which brain areas fire and connect to each other to produce complex behaviors in a few living primates, little is known about their evolution, and which brain areas or facets of cognition were favored by natural selection. By developing statistical tools to study the evolution of the brain cortex at the fine scale, we found that rapid cortical expansion in the prefrontal region took place early on during the evolution of primates. In anthropoids, fast-expanding cortical areas extended to the posterior parietal cortex. In Homo, further expansion affected the medial temporal lobe and the posteroinferior region of the parietal lobe. Collectively, the fast-expanding cortical areas in anthropoids are known to form a brain network producing mind reading abilities and other higher-order cognitive functions. These results indicate that pursuing complex cognition drove the evolution of Primate brains.
- 18 January 2025
- Published by Springer Nature in Communications Biology
- Vol. 8 (1) , 1-12
Top Cited PapersOpen AccessCortical areas associated to higher cognition drove primate brain evolution
Although intense research effort is seeking to address which brain areas fire and connect to each other to produce complex behaviors in a few living primates, little is known about their evolution, and which brain areas or facets of cognition were favored by natural selection. By developing statistical tools to study the evolution of the brain cortex at the fine scale, we found that rapid cortical expansion in the prefrontal region took place early on during the evolution of primates. In anthropoids, fast-expanding cortical areas extended to the posterior parietal cortex. In Homo, further expansion affected the medial temporal lobe and the posteroinferior region of the parietal lobe. Collectively, the fast-expanding cortical areas in anthropoids are known to form a brain network producing mind reading abilities and other higher-order cognitive functions. These results indicate that pursuing complex cognition drove the evolution of Primate brains.
- Open Access
- 26 May 2024
- Published by Springer Nature in Journal of Iberian Geology
- Vol. 50 (3) , 605-631
The late Early Pleistocene site of Fuente Nueva-3 (Guadix-Baza Depression, SE Spain): a hyena latrine developed on a quicksand trap for megaherbivores?
The late Early Pleistocene archaeological site of Fuente Nueva-3 (FN3), which lies in the Guadix-Baza Depression (SE Spain) and is dated to ~ 1.4 Ma, contributes some of the oldest evidence of hominin presence in Western Europe, including a huge tool assemblage of Oldowan tradition, manuports (i.e., unmodified stones used as percussion tools) and abundant fossils of large mammals, some of which preserve anthropogenic marks related to defleshing, butchering and marrow processing. In addition, there are bones with tooth marks produced by scavenging carnivores. The fertile layers of the FN3 section have been grouped in a lower archaeological level (LAL) and an upper archaeological level (UAL). Both levels preserve abundant skeletal remains and lithic tools. However, the LAL shows a high density of manuports, which suggests that hominin activity was more intense at this level, while the UAL preserves many remains of megaherbivores, particularly proboscideans (Mammuthus meridionalis), and almost all coprolites unearthed from the site, which points to a greater involvement of the giant hyenas (Pachycrocuta brevirostris). In this paper, we (i) test for statistical differences in the composition of the faunal assemblages preserved in the UAL and LAL; and (ii) analyze particle size in the fertile layers of both archaeological levels. Our results show that megaherbivores are comparatively overrepresented in the UAL, specially by young elephants, while other medium-to-large and large-sized ungulates, particularly equids, are more abundant in the LAL, showing a predominance of adult individuals. Concerning the sedimentology, layers 2–3 of the LAL show a predominance of silts and clays, with sands representing a minor fraction. In contrast, layer 5 of the UAL is composed of two-thirds of fine and very fine sands, with the remaining third consisting of silts and clays. These data and the paleoenvironmental reconstruction of layer 5 suggest that it may be interpreted as a paleo-quicksand in which megaherbivores were trapped due to the elevated weight per unit area supported by their feet, and their half-sunken carcasses attracted the scavengers, particularly the hyenas, which fed on these carcasses and defecated in their surroundings.
- 26 May 2024
- Published by Springer Nature in Journal of Iberian Geology
- Vol. 50 (3) , 605-631
Open AccessThe late Early Pleistocene site of Fuente Nueva-3 (Guadix-Baza Depression, SE Spain): a hyena latrine developed on a quicksand trap for megaherbivores?
The late Early Pleistocene archaeological site of Fuente Nueva-3 (FN3), which lies in the Guadix-Baza Depression (SE Spain) and is dated to ~ 1.4 Ma, contributes some of the oldest evidence of hominin presence in Western Europe, including a huge tool assemblage of Oldowan tradition, manuports (i.e., unmodified stones used as percussion tools) and abundant fossils of large mammals, some of which preserve anthropogenic marks related to defleshing, butchering and marrow processing. In addition, there are bones with tooth marks produced by scavenging carnivores. The fertile layers of the FN3 section have been grouped in a lower archaeological level (LAL) and an upper archaeological level (UAL). Both levels preserve abundant skeletal remains and lithic tools. However, the LAL shows a high density of manuports, which suggests that hominin activity was more intense at this level, while the UAL preserves many remains of megaherbivores, particularly proboscideans (Mammuthus meridionalis), and almost all coprolites unearthed from the site, which points to a greater involvement of the giant hyenas (Pachycrocuta brevirostris). In this paper, we (i) test for statistical differences in the composition of the faunal assemblages preserved in the UAL and LAL; and (ii) analyze particle size in the fertile layers of both archaeological levels. Our results show that megaherbivores are comparatively overrepresented in the UAL, specially by young elephants, while other medium-to-large and large-sized ungulates, particularly equids, are more abundant in the LAL, showing a predominance of adult individuals. Concerning the sedimentology, layers 2–3 of the LAL show a predominance of silts and clays, with sands representing a minor fraction. In contrast, layer 5 of the UAL is composed of two-thirds of fine and very fine sands, with the remaining third consisting of silts and clays. These data and the paleoenvironmental reconstruction of layer 5 suggest that it may be interpreted as a paleo-quicksand in which megaherbivores were trapped due to the elevated weight per unit area supported by their feet, and their half-sunken carcasses attracted the scavengers, particularly the hyenas, which fed on these carcasses and defecated in their surroundings.
- Open Access
- 24 January 2024
- Published by Frontiers Media SA in Frontiers in Veterinary Science
- Vol. 10, 1181036
Advancements in veterinary medicine: the use of Flowgy for nasal airflow simulation and surgical predictions in big felids (a case study in lions)
Flowgy is a semi-automated tool designed to simulate airflow across the nasal passage and detect airflow alterations in humans. In this study, we tested the use and accuracy of Flowgy in non-human vertebrates, using large felids as the study group. Understanding the dynamics of nasal airflow in large felids such as lions (Panthera leo) is crucial for their health and conservation. Therefore, we simulated airflow during inspiration through the nasal passage in three lions (Panthera leo), two of which were siblings (specimens ZPB_PL_002 and ZPB_PL_003), without breathing obstructions. However, one of the specimens (ZPB_PL_001) exhibited a slight obstruction in the nasal vestibule, which precluded the specimen from breathing efficiently. Computed tomography (CT) scans of each specimen were obtained to create detailed three-dimensional models of the nasal passage. These models were then imported into Flowgy to simulate the airflow dynamics. Virtual surgery was performed on ZPB_PL_001 to remove the obstruction and re-simulate the airflow. In parallel, we simulated the respiration of the two sibling specimens and performed an obstructive operation followed by an operation to remove the obstruction at the same level and under the same conditions as the original specimen (ZPB_PL_001). Thus, we obtained a pattern of precision for the operation by having two comparable replicas with the obstructed and operated specimens. The simulations revealed consistent airflow patterns in the healthy specimens, demonstrating the accuracy of Flowgy. The originally obstructed specimen and two artificially obstructed specimens showed a significant reduction in airflow through the right nostril, which was restored after virtual surgery. Postoperative simulation indicated an improvement of >100% in respiratory function. Additionally, the temperature and humidity profiles within the nostrils showed marked improvements after surgery. These findings underscore the potential of Flowgy in simulating nasal airflow and predicting the outcomes of surgical interventions in large felids. This could aid in the early detection of respiratory diseases and inform clinical decision-making, contributing to improved veterinary care and conservation efforts. However, further research is needed to validate these findings in other species and explore the potential of integrating Flowgy with other diagnostic and treatment tools in veterinary medicine.
- 24 January 2024
- Published by Frontiers Media SA in Frontiers in Veterinary Science
- Vol. 10, 1181036
Open AccessAdvancements in veterinary medicine: the use of Flowgy for nasal airflow simulation and surgical predictions in big felids (a case study in lions)
Flowgy is a semi-automated tool designed to simulate airflow across the nasal passage and detect airflow alterations in humans. In this study, we tested the use and accuracy of Flowgy in non-human vertebrates, using large felids as the study group. Understanding the dynamics of nasal airflow in large felids such as lions (Panthera leo) is crucial for their health and conservation. Therefore, we simulated airflow during inspiration through the nasal passage in three lions (Panthera leo), two of which were siblings (specimens ZPB_PL_002 and ZPB_PL_003), without breathing obstructions. However, one of the specimens (ZPB_PL_001) exhibited a slight obstruction in the nasal vestibule, which precluded the specimen from breathing efficiently. Computed tomography (CT) scans of each specimen were obtained to create detailed three-dimensional models of the nasal passage. These models were then imported into Flowgy to simulate the airflow dynamics. Virtual surgery was performed on ZPB_PL_001 to remove the obstruction and re-simulate the airflow. In parallel, we simulated the respiration of the two sibling specimens and performed an obstructive operation followed by an operation to remove the obstruction at the same level and under the same conditions as the original specimen (ZPB_PL_001). Thus, we obtained a pattern of precision for the operation by having two comparable replicas with the obstructed and operated specimens. The simulations revealed consistent airflow patterns in the healthy specimens, demonstrating the accuracy of Flowgy. The originally obstructed specimen and two artificially obstructed specimens showed a significant reduction in airflow through the right nostril, which was restored after virtual surgery. Postoperative simulation indicated an improvement of >100% in respiratory function. Additionally, the temperature and humidity profiles within the nostrils showed marked improvements after surgery. These findings underscore the potential of Flowgy in simulating nasal airflow and predicting the outcomes of surgical interventions in large felids. This could aid in the early detection of respiratory diseases and inform clinical decision-making, contributing to improved veterinary care and conservation efforts. However, further research is needed to validate these findings in other species and explore the potential of integrating Flowgy with other diagnostic and treatment tools in veterinary medicine.
- Open Access
- 10 November 2023
- Published by Springer Nature in Communications Biology
- Vol. 6 (1) , 1-10
The impact of the land-to-sea transition on evolutionary integration and modularity of the pinniped backbone
In this study, we investigate how the terrestrial-aquatic transition influenced patterns of axial integration and modularity in response to the secondary adaptation to a marine lifestyle. We use 3D geometric morphometrics to quantify shape covariation among presacral vertebrae in pinnipeds (Carnivora; Pinnipedia) and to compare with patterns of axial integration and modularity in their close terrestrial relatives. Our results indicate that the vertebral column of pinnipeds has experienced a decrease in the strength of integration among all presacral vertebrae when compared to terrestrial carnivores (=fissipeds). However, separate integration analyses among the speciose Otariidae (i.e., sea lions and fur seals) and Phocidae (i.e., true seals) also suggests the presence of different axial organizations in these two groups of crown pinnipeds. While phocids present a set of integrated “thoracic” vertebrae, the presacral vertebrae of otariids are characterized by the absence of any set of vertebrae with high integration. We hypothesize that these differences could be linked to their specific modes of aquatic locomotion –i.e., pelvic vs pectoral oscillation. Our results provide evidence that the vertebral column of pinnipeds has been reorganized from the pattern observed in fissipeds but is more complex than a simple “homogenization” of the modular pattern of their close terrestrial relatives.
- 10 November 2023
- Published by Springer Nature in Communications Biology
- Vol. 6 (1) , 1-10
Open AccessThe impact of the land-to-sea transition on evolutionary integration and modularity of the pinniped backbone
In this study, we investigate how the terrestrial-aquatic transition influenced patterns of axial integration and modularity in response to the secondary adaptation to a marine lifestyle. We use 3D geometric morphometrics to quantify shape covariation among presacral vertebrae in pinnipeds (Carnivora; Pinnipedia) and to compare with patterns of axial integration and modularity in their close terrestrial relatives. Our results indicate that the vertebral column of pinnipeds has experienced a decrease in the strength of integration among all presacral vertebrae when compared to terrestrial carnivores (=fissipeds). However, separate integration analyses among the speciose Otariidae (i.e., sea lions and fur seals) and Phocidae (i.e., true seals) also suggests the presence of different axial organizations in these two groups of crown pinnipeds. While phocids present a set of integrated “thoracic” vertebrae, the presacral vertebrae of otariids are characterized by the absence of any set of vertebrae with high integration. We hypothesize that these differences could be linked to their specific modes of aquatic locomotion –i.e., pelvic vs pectoral oscillation. Our results provide evidence that the vertebral column of pinnipeds has been reorganized from the pattern observed in fissipeds but is more complex than a simple “homogenization” of the modular pattern of their close terrestrial relatives.
- Open Access
- 10 April 2021
- Published by Oxford University Press (OUP) in Evolution Letters
- Vol. 5 (3) , 251-264
Phenotypic integration in the carnivoran backbone and the evolution of functional differentiation in metameric structures
Explaining the origin and evolution of a vertebral column with anatomically distinct regions that characterizes the tetrapod body plan provides understanding of how metameric structures become repeated and how they acquire the ability to perform different functions. However, despite many decades of inquiry, the advantages and costs of vertebral column regionalization in anatomically distinct blocks, their functional specialization, and how they channel new evolutionary outcomes are poorly understood. Here, we investigate morphological integration (and how this integration is structured [modularity]) between all the presacral vertebrae of mammalian carnivorans to provide a better understanding of how regionalization in metameric structures evolves. Our results demonstrate that the subunits of the presacral column are highly integrated. However, underlying to this general pattern, three sets of vertebrae are recognized as presacral modules—the cervical module, the anterodorsal module, and the posterodorsal module—as well as one weakly integrated vertebra (diaphragmatic) that forms a transition between both dorsal modules. We hypothesize that the strength of integration organizing the axial system into modules may be associated with motion capability. The highly integrated anterior dorsal module coincides with a region with motion constraints to avoid compromising ventilation, whereas for the posterior dorsal region motion constraints avoid exceeding extension of the posterior back. On the other hand, the weakly integrated diaphragmatic vertebra belongs to the “Diaphragmatic joint complex”—a key region of the mammalian column of exceedingly permissive motion. Our results also demonstrate that these modules do not match with the traditional morphological regions, and we propose natural selection as the main factor shaping this pattern to stabilize some regions and to allow coordinate movements in others.
- 10 April 2021
- Published by Oxford University Press (OUP) in Evolution Letters
- Vol. 5 (3) , 251-264
Open AccessPhenotypic integration in the carnivoran backbone and the evolution of functional differentiation in metameric structures
Explaining the origin and evolution of a vertebral column with anatomically distinct regions that characterizes the tetrapod body plan provides understanding of how metameric structures become repeated and how they acquire the ability to perform different functions. However, despite many decades of inquiry, the advantages and costs of vertebral column regionalization in anatomically distinct blocks, their functional specialization, and how they channel new evolutionary outcomes are poorly understood. Here, we investigate morphological integration (and how this integration is structured [modularity]) between all the presacral vertebrae of mammalian carnivorans to provide a better understanding of how regionalization in metameric structures evolves. Our results demonstrate that the subunits of the presacral column are highly integrated. However, underlying to this general pattern, three sets of vertebrae are recognized as presacral modules—the cervical module, the anterodorsal module, and the posterodorsal module—as well as one weakly integrated vertebra (diaphragmatic) that forms a transition between both dorsal modules. We hypothesize that the strength of integration organizing the axial system into modules may be associated with motion capability. The highly integrated anterior dorsal module coincides with a region with motion constraints to avoid compromising ventilation, whereas for the posterior dorsal region motion constraints avoid exceeding extension of the posterior back. On the other hand, the weakly integrated diaphragmatic vertebra belongs to the “Diaphragmatic joint complex”—a key region of the mammalian column of exceedingly permissive motion. Our results also demonstrate that these modules do not match with the traditional morphological regions, and we propose natural selection as the main factor shaping this pattern to stabilize some regions and to allow coordinate movements in others.
- Open Access
- 23 December 2020
- Published by The Royal Society in Biology Letters
- Vol. 16 (12) , 20200792
Three-dimensional dental topography and feeding ecology in the extinct cave bear
The cave bear (Ursus spelaeus s.l.) was an iconic extinct bear that inhabited the Pleistocene of Eurasia. The cause of extinction of this species is unclear and to identify the actual factors, it is crucial to understand its feeding preferences. Here, we quantified the shape descriptor metrics in three-dimensional (3D) models of the upper teeth (P4–M2) of the cave bear to make inferences about its controversial feeding behaviour. We used comparative samples, including representatives of all living bear species with known diets, as a template. Our topographic analyses show that the complexity of upper tooth rows in living bears is more clearly associated with the mechanical properties of the items consumed than with the type of food. Cave bears exhibit intermediate values on topographic metrics compared with the bamboo-feeder giant panda (Ailuropoda melanoleuca) and specialists in hard mast consumption (Ursus arctos and Ursus thibetanus). The crown topography of cave bear upper teeth suggests that they could chew on tough vegetal resources of low quality with high efficiency, a characteristic that no living bear currently displays. Our results align with a climate-driven hypothesis to explain the extinction of cave bear populations during the Late Pleistocene.
- 23 December 2020
- Published by The Royal Society in Biology Letters
- Vol. 16 (12) , 20200792
Open AccessThree-dimensional dental topography and feeding ecology in the extinct cave bear
The cave bear (Ursus spelaeus s.l.) was an iconic extinct bear that inhabited the Pleistocene of Eurasia. The cause of extinction of this species is unclear and to identify the actual factors, it is crucial to understand its feeding preferences. Here, we quantified the shape descriptor metrics in three-dimensional (3D) models of the upper teeth (P4–M2) of the cave bear to make inferences about its controversial feeding behaviour. We used comparative samples, including representatives of all living bear species with known diets, as a template. Our topographic analyses show that the complexity of upper tooth rows in living bears is more clearly associated with the mechanical properties of the items consumed than with the type of food. Cave bears exhibit intermediate values on topographic metrics compared with the bamboo-feeder giant panda (Ailuropoda melanoleuca) and specialists in hard mast consumption (Ursus arctos and Ursus thibetanus). The crown topography of cave bear upper teeth suggests that they could chew on tough vegetal resources of low quality with high efficiency, a characteristic that no living bear currently displays. Our results align with a climate-driven hypothesis to explain the extinction of cave bear populations during the Late Pleistocene.
- Open Access
- 18 September 2020
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 8
Toward an “Ancient” Virtual World: Improvement Methods on X-ray CT Data Processing and Virtual Reconstruction of Fossil Skulls
This article focuses on new virtual advances to solve technical problems usually encountered by paleontologists when using X-ray computed tomography (XCT), such as (i) the limited scanning envelope (i.e., field of view of CT systems/machines) to acquire data on large structures; (ii) the use in the same study of biological objects acquired with different types of computed tomography systems (medical and laboratory XCTs and laboratory high-resolution XμCT) and therefore different resolutions; and (iii) matrix removal within the fossil (e.g., cranial cavities, intratrabecular cavities, among other cavities). All these problems are very common in paleontology, and therefore, solving them is important to save effort and the time invested in data processing. In this article, we propose various solutions to tackle these issues, based on new technical advances focused on improving and processing the images obtained from XCT. Other aspects include image filtering and histogram calibration to remove background noise and artifacts. Such artifacts can result from dense mineral inclusion occurring during the fossilization process or derived from anthropogenic restoration of the sample. Accordingly, here, we provide a protocol to acquire data on samples with size that exceed the scanning envelope of the X-ray tomography machine, joining the parts with enough accuracy, and we propose the use of the interpolation “bicubic” method. Moreover, using this method, it is possible to use medical/laboratory XCT data together with XμCT data and therefore opening new ways to manipulate the acquired data within the image stack. Another advantage is the use of plugins for quantitative analysis, which require data with isometric voxels, such as the plugin BoneJ of the software ImageJ. We also deal with the problem of removing the exogenous material that usually fills the internal cavities of fossils by means of using filters based on edge detection by gradient. Applying this method, it is possible to segment the non-bony matrix parts more quickly and efficiently. All of this is exemplified using five fossil skulls belonging to the cave bear group (Ursus spelaeus sensu lato), an iconic fossil species from the Pleistocene of Eurasia.
- 18 September 2020
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 8
Open AccessToward an “Ancient” Virtual World: Improvement Methods on X-ray CT Data Processing and Virtual Reconstruction of Fossil Skulls
This article focuses on new virtual advances to solve technical problems usually encountered by paleontologists when using X-ray computed tomography (XCT), such as (i) the limited scanning envelope (i.e., field of view of CT systems/machines) to acquire data on large structures; (ii) the use in the same study of biological objects acquired with different types of computed tomography systems (medical and laboratory XCTs and laboratory high-resolution XμCT) and therefore different resolutions; and (iii) matrix removal within the fossil (e.g., cranial cavities, intratrabecular cavities, among other cavities). All these problems are very common in paleontology, and therefore, solving them is important to save effort and the time invested in data processing. In this article, we propose various solutions to tackle these issues, based on new technical advances focused on improving and processing the images obtained from XCT. Other aspects include image filtering and histogram calibration to remove background noise and artifacts. Such artifacts can result from dense mineral inclusion occurring during the fossilization process or derived from anthropogenic restoration of the sample. Accordingly, here, we provide a protocol to acquire data on samples with size that exceed the scanning envelope of the X-ray tomography machine, joining the parts with enough accuracy, and we propose the use of the interpolation “bicubic” method. Moreover, using this method, it is possible to use medical/laboratory XCT data together with XμCT data and therefore opening new ways to manipulate the acquired data within the image stack. Another advantage is the use of plugins for quantitative analysis, which require data with isometric voxels, such as the plugin BoneJ of the software ImageJ. We also deal with the problem of removing the exogenous material that usually fills the internal cavities of fossils by means of using filters based on edge detection by gradient. Applying this method, it is possible to segment the non-bony matrix parts more quickly and efficiently. All of this is exemplified using five fossil skulls belonging to the cave bear group (Ursus spelaeus sensu lato), an iconic fossil species from the Pleistocene of Eurasia.