Elena I. Lysakova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Elena I. Lysakova has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
A. M. Reznik
2 shared publicationsA. G. Smirnova
Lomonosov State Academy of Fine Chemical Technology
1 shared publication- Alexander A. Alexandrov
Prokhorov General Physics Institute, Russian Academy of Sciences, Moscow, Russia
1 shared publication - Alexander Baranchikov
Kurnakov Institute of General and Inorganic Chemistry of Russian Academy of Sciences, Moscow 119991, Russia
1 shared publication - Daria V. Pominova
Prokhorov General Physics Institute of the Russian Academy of Sciences, Moscow, Russia
1 shared publication M. V. Tsygankova
1 shared publication
Latest Publications
- Open Access
- 20 March 2020
- Published by Voronezh State University in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
- Vol. 22 (1)
Синтез ап-конверсионных люминофоров на основе фторида кальция
The aim of our study was to synthesize a luminophore based on calcium fl uoride doped with rare-earth elements: 5 % Yb and 1 % Er, using the molten salt synthesis method. NaNO3 was used as a solvent and sodium fluoride NaF served as the fluorinating agent. The obtained samples were analysed and described using X-ray powder diffraction analysis, energy dispersive X-ray spectroscopy, scanning electron microscopy, and luminescence spectroscopy. During the study we also investigated the effect of the synthesis conditions on the phase composition and the particles morphology. It was determined that single-phase samples (solid solutions based on calcium fl uoride) can only be obtained at a temperature of at least 400 °C, with the optimal exposure time being 3 hours. The composition of the obtained samples was determined. It differs from the nominal composition and can be described as Ca0.88(Yb, Er)0.06Na0.06F2. It was demonstrated that the parallel insertion of sodium and rare-earth element ions increases the solubility limit of sodium fl uoride in calcium fl uoride. The luminescence effi ciency was 1.21 %. As a result of this study we obtained a new material with upconversion properties. REFERENCES
- 20 March 2020
- Published by Voronezh State University in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
- Vol. 22 (1)
Open AccessСинтез ап-конверсионных люминофоров на основе фторида кальция
The aim of our study was to synthesize a luminophore based on calcium fl uoride doped with rare-earth elements: 5 % Yb and 1 % Er, using the molten salt synthesis method. NaNO3 was used as a solvent and sodium fluoride NaF served as the fluorinating agent. The obtained samples were analysed and described using X-ray powder diffraction analysis, energy dispersive X-ray spectroscopy, scanning electron microscopy, and luminescence spectroscopy. During the study we also investigated the effect of the synthesis conditions on the phase composition and the particles morphology. It was determined that single-phase samples (solid solutions based on calcium fl uoride) can only be obtained at a temperature of at least 400 °C, with the optimal exposure time being 3 hours. The composition of the obtained samples was determined. It differs from the nominal composition and can be described as Ca0.88(Yb, Er)0.06Na0.06F2. It was demonstrated that the parallel insertion of sodium and rare-earth element ions increases the solubility limit of sodium fl uoride in calcium fl uoride. The luminescence effi ciency was 1.21 %. As a result of this study we obtained a new material with upconversion properties. REFERENCES
- 31 July 2015
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 40-43
Extraction of aluminium and gallium by nitrogen-containing phenol-type extractants
- 31 July 2015
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 40-43
Extraction of aluminium and gallium by nitrogen-containing phenol-type extractants
- 1 February 2011
- Published by Allerton Press in Russian Journal of Non-Ferrous Metals
- Vol. 52 (1) , 19-23
The recovery of vanadium from ash obtained during the combustion of fuel oil at thermal power stations
The recovery modes of vanadium from the vanadium-containing ashes of foreign thermal power stations (the Fiomo Santo station (Italy) (sample 1) and stations in Leina, Germany, (sample 2) and Cagliari, Italy (sample 3)) are established. It is shown that there is no single approach to directly recovering vanadium from various ashes. Each ash needs its own leaching mode depending on its chemical and phase compositions, namely, for samples 1 and 2, this is leaching with water and 9% sulfuric acid at S: L = 1: 4 and t = 60–80°C for 30 min; for sample 3, this is leaching with 5% sulfuric acid in the presence of hydrogen peroxide at S: L = 1: 4 and t = 20°C for 30 min and then for 60 min at 60°C. The conditions for the hydrolytic precipitation of vanadium from the leaching solutions are selected. It is shown that, in order to isolate it from solutions at the stage of hydrolytic precipitation most completely, it is necessary to change the degree of oxidation of vanadium to +5 using hydrogen pentoxide at t = 20°C for 30 min and then precipitate vanadium peroxide at pH = 1.8–2.0 and t = 95°C for 2 h.
- 1 February 2011
- Published by Allerton Press in Russian Journal of Non-Ferrous Metals
- Vol. 52 (1) , 19-23
The recovery of vanadium from ash obtained during the combustion of fuel oil at thermal power stations
The recovery modes of vanadium from the vanadium-containing ashes of foreign thermal power stations (the Fiomo Santo station (Italy) (sample 1) and stations in Leina, Germany, (sample 2) and Cagliari, Italy (sample 3)) are established. It is shown that there is no single approach to directly recovering vanadium from various ashes. Each ash needs its own leaching mode depending on its chemical and phase compositions, namely, for samples 1 and 2, this is leaching with water and 9% sulfuric acid at S: L = 1: 4 and t = 60–80°C for 30 min; for sample 3, this is leaching with 5% sulfuric acid in the presence of hydrogen peroxide at S: L = 1: 4 and t = 20°C for 30 min and then for 60 min at 60°C. The conditions for the hydrolytic precipitation of vanadium from the leaching solutions are selected. It is shown that, in order to isolate it from solutions at the stage of hydrolytic precipitation most completely, it is necessary to change the degree of oxidation of vanadium to +5 using hydrogen pentoxide at t = 20°C for 30 min and then precipitate vanadium peroxide at pH = 1.8–2.0 and t = 95°C for 2 h.