Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuwen Shu has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Research on adaptive S-type curve control method for hydraulic fine-blanking press in automotive component manufacturing

    by Yuwen Shu, Yanxiong Liu, Zhicheng Xu, Jihui Cheng, Xingjie Wu, Mingzhang Chen

    During the production process of hydraulic fine-blanking presses (FBPs), significant hydraulic impacts and equipment damage occur due to rapid large-span opening and closing of hydraulic valve ports during stage transitions. The fast approach (FA) and fast return (FR) stage exhibit the most pronounced speed variations, leading to severe hydraulic impact that reduces the precision and quality of automotive parts molding. To address this issue, we propose an adaptive S-type curve for the FA and FR stages, integrated with a feedback linearization sliding mode control (FLSMC) system to precisely regulate the slide block speed. Experimental results demonstrate that the proposed system eliminates acceleration, deceleration, startup, and shutdown impacts during the FA stage. The controller achieves high precision, robust dynamic performance, and stable operation. Experimental results demonstrate that the proposed system eliminates acceleration, deceleration, startup, and shutdown impacts during the FA stage. The maximum pressure peak is reduced by 30.1%, the instantaneous pressure change rate is decreased by 45.7%, and the fitting degree between the actual slide block displacement and the designed S-curve reaches 97.4% in the FA stage and 96.3% in the FR stage. Effectively reducing hydraulic impact issues, this system improves accuracy of slider movement while enhancing manufacturing precision of gears, transmission components, and structural automotive parts.

  • Optimization and performance analysis of a novel automatic planting-irrigating integrated robot

    by Xunchen Liu, Hongxun Huang, Mingzhang Chen, Yuan Fang, Yuwen Shu

    Soil desertification is a severe environmental problem that seriously threatens the ecological environment and sustainable development. Traditional tree-planting methods face challenges such as insufficient labor force and low efficiency. Based on these problems, this study designed a novel automatic planting-irrigation integrated robot with automatic planting, irrigating, and monitoring functions. The robot obtains land information through laser triangle ranging technology, the camera, and other sensors. Machine vision and deep learning algorithms are applied for image processing and identification to identify the areas suitable for tree planting accurately. The drip irrigation module adopts the DHT11 digital temperature and humidity sensor control switch, which can realize efficient tree planting and watering operation, and ensure the growth of saplings and has a broad application prospect. Our design is meaningful in restraining soil desertification, maintaining the ecological environment, and realizing a sustainable economy.


  • Energy efficiency improvement of heavy-load hydraulic fine blanking press for sustainable manufacturing assisted by multi-stages pressure source system

    by Yanxiong Liu, Yuwen Shu, Zhicheng Xu, Xinhao Zhao, Mingzhang Chen

    The fine blanking process has the highest forming accuracy in the field of metal forming and its production volume has increased sharply. However, hydraulic fine blanking presses (HFBP) – the core equipment of the fine blanking process, have suffered from significant energy loss due to the inefficient hydraulic system. To enhance the energy efficiency of the hydraulic system, this study introduced a novel approach – a multi-stage pressure source system comprised of distinct pump-accumulator groups, each operating at varied supplied pressures to narrow the mismatch of the installed and demanded power. This adaptive system is capable of automatic adjustments to align with the required pressure, thereby mitigating energy losses while concurrently preserving superior dynamic working performance. First, this study commenced with a theoretical analysis of the system configuration and energy characteristics of HFBP. Subsequently, a comprehensive exploration into the inherent inefficiencies of the hydraulic system is undertaken by formulating a precise energy consumption model. Finally, a novel energy-saving optimization design was carried out on the fast-approaching subsystem. The results demonstrated that the implementation of the proposed system led to a notable reduction of 76.87% in energy loss within the flow-regulating module, and an overall diminution of 13.53% in energy dissipation compared to the conventional system. This study will significantly advance sustainable manufacturing practices within the metal-forming domain by reducing electricity consumption and production cost.


  • Open Access

    Optimization of Hydraulic Fine Blanking Press Control System Based on System Identification

    by Yuwen Shu, Yanxiong Liu, Zhicheng Xu, Xinhao Zhao, Mingzhang Chen

    Fine-blanking is a molding process based on the common blanking process, which obtains hydrostatic stress through blank holder reverse jacking, in order to increase material plasticity. It requires special equipment, namely a fine-blanking press, to complete the fine-blanking process. In this paper, the problem of the speed of the slide block fluctuation found in the actual use of a 12,000 kN hydraulic fine-blanking press after multi-stage pressure source optimization is studied. Firstly, the mathematical model of the motion of the slide block in the blanking stage of the hydraulic fine blanking press is established, and the accurate mathematical model in the blanking stage of the hydraulic fine-blanking press is obtained through the least square method system identification experiment. Aiming at the complex working situation of the fine-blanking press, a phased PID control strategy is creatively proposed. The optimal PID control parameters are obtained by a genetic algorithm, and established a fuzzy PID controller for the blanking stage to accurately control the movement speed of the slide block. The results show that the new control strategy is very effective in improving the movement accuracy of the slide block, effectively improving the machining accuracy and reducing the impact vibration of the hydraulic system.


  • Open Access

    LMS/RLS/OCTAVE Vibration Controls of Cold Orbital Forging Machines for Improving Quality of Forged Vehicle Parts

    by Mingzhang Chen, Xinfei Ning, Zijian Zhou, Yuwen Shu, Yun Tang, Yang Cao, Xuebing Shang, Xinghui Han

    Cold orbital forging (COF) as an advanced incremental metal-forming technology has been widely used in processing vehicle parts. During the COF process, the vibration on the COF machine injures the service life of the machine and the quality of the forged part. The study of the vibration control of the COF machine is therefore necessary. In this study, the dynamic model of the COF machine is established, and the vibration performances of some key positions are obtained using Matlab&Simulink software. Subsequently, the vibration performances are effectively verified by conducting a vibration test experiment. Based on the dynamics model of the COF machine and Matlab&Simulink software, least-mean-squares (LMS), recursive least-squares (RLS) and OCTAVE vibration-control algorithms are applied to reduce the vibration. Comparing the vibration performances of the COF machine, these vibration-control algorithms are useful for reducing the vibration of the machine, which improves the service life of the machine and the quality of the forged part. Based on the vibration performances of the COF machine, the effects of LMS and RLS vibration controls are better than the OCTAVE, and they also obviously reduce the vibration of the COF machine. The vibration-control algorithms are first to be applied to reduce the vibration of the COF machines in this study, which will be beneficial to future research on the vibration controls of metal-forming machines and other mechanical systems.


  • Open Access

    Thermal Analysis of Automobile Drive Axles by the Thermal Network Method

    by Xinfei Ning, Mingzhang Chen, Zijian Zhou, Yuwen Shu, Wei Xiong, Yang Cao, Xuebing Shang, Zixi Wang

    Excessive temperature is detrimental to the operation stability of the automobile drive axle. It is necessary to judge whether the highest temperature exceeds the limited dangerous temperature and study the effects of key factors on reducing the temperature. In this study, the temperature field distribution (TFD) of the automobile drive axle is revealed using the thermal network method (TNM). Compared with the experimentation and finite element analysis (FEA), the TNM is more convenient for obtaining the temperature. Subsequently, the highest temperature of the automobile drive axle is clear and applied to judge whether the highest temperature exceeds the limited dangerous temperature. On the basis of the TNM, the structure and parameter effects of the automobile drive axle on reducing the temperature are studied, which improves the operation stability and working life. Several conclusions can be drawn. The highest temperatures of two-axle and planetary automobile drive axles are both located in the motor. Compared with the two-axle drive axle, the highest temperature of the planetary drive axle is obviously lower. Therefore, in terms of the planetary drive axle, the possibility of exceeding the limited dangerous temperature is lower. In addition, on the premise of ensuring the normal operation, the motor output power, the friction coefficient among teeth, the helical angle of the gear, and the thermal transfer coefficient of the lubricating oil can be optimized to be lower for reducing the temperature of the automobile drive axle.


  • Open Access

    Active vibration control of mechanical servo high speed fine-blanking press

    by Yan Xiong Liu, Yuwen Shu, Wen Tao Hu, Xin Hao Zhao, Zhi Cheng Xu

    The fine-blanking process as an advanced sheet metal forming process has been widely applied in the industrial area. However, special designed equipment is required for this process. In this paper, a novel mechanical servo high speed fine-blanking press with the capacity of 3200kN is proposed, and the vibration control for this machine is researched to achieve the requirement of fine-blanked parts of high dimensional accuracy, since the vibration of the fine-blanking machine will cause the machining displacement error and reduce the machining accuracy. The self-adaptive feed forward control is used to simulate the active vibration control of the mechanical fine-blanking machine. The vibration control principle of the fine-blanking machine is described and the control algorithm is established. At the same time, the vibration mechanical model of the fine-blanking machine as the controlled object is established, and the parameters of the excitation input and the mechanical model are obtained by the fine-blanking finite element simulation and the experiments of the vibration measurement of the press. Finally, the numerical simulation and analysis of active vibration control based on Matlab are carried out. The results show that the control effect is good, and the vibration response is effectively reduced.