RARomário Oliveira de Andrade

Romário Oliveira de Andrade

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Romário Oliveira de Andrade has a total of 96 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Surface and Structural Modifications Induced by Dielectric Barrier Discharge Cold Plasma and Pulsed Light Radiation in Bean Starch Films: Implications for Bread Shelf-Life Extension

    by Raquel A. de L. Dias, Newton C. Santos, Raphael L. J. Almeida, Virgínia M. de A. Silva, Thalis L. B. de Lima, Alexmilde Fernandes da Silva, Mércia M. de A. Mota, Ana F. S. Coelho, Severina de Sousa, Josivanda P. Gomes, et al.

    In this study, bean starch films were developed and treated with dielectric barrier discharge (DBD) cold plasma (5 min (DBD5), 10 min (DBD10), and 15 min (DBD15)) and pulsed light (PL) radiation (4 J cm−2 (PL4), 8 J cm−2 (PL8), and 12 J cm−2 (PL12)), and the effects of these treatments on the physical, barrier, mechanical, morphological, and structural properties were evaluated, as well as the practical application of the films in bread storage for 7 days. Both treatments significantly modified the film properties (p < 0.05). Film thickness decreased from 95 µm (control) to 87 µm (PL12), while solubility was reduced from 39.40% (control) to 25.32% (PL12), indicating improved water resistance. Reductions in water vapor permeability (WVP) were also observed, with a more pronounced effect for PL12 (approximately 55% reduction compared to the control). The contact angle increased from 58.30° (control) to 67.76° (PL12), indicating a moderate increase in surface hydrophobicity. The DBD cold plasma treatment increased tensile strength (up to 16.05 MPa in DBD15) and reduced elongation (44.72%), whereas PL, especially at PL8, increased flexibility (60.36%). Morphological analyses indicated increased surface roughness for DBD-treated films, while structural analyses suggested subtle changes in molecular organization rather than the formation of well-defined crystalline domains. During bread storage, the treated films, particularly PL12, were significantly more effective than the control in delaying bread staling (final firmness of 6.67 N vs. 11.82 N), reducing mass loss (5.66% vs. 12.66%), and maintaining higher water activity, thereby better preserving product quality. Overall, both treatments showed potential for tailoring film properties: DBD was more effective in enhancing mechanical strength, while PL promoted improvements in barrier properties and practical performance. Therefore, physical treatments, particularly PL, represent promising strategies to overcome intrinsic limitations of starch-based films and to develop packaging materials with potential applications in bakery product preservation.


  • Open Access

    Reagent behavior of jabuticaba pulp with different maltodextrin concentrations

    by Gustavo Santos de Lima, Romário Oliveira de Andrade, Josivanda Palmeira Gomes, Katcilanya Menezes de Almeida, Jessica Bezerra dos Santos Rodrigues, Júlio César Bezerra Vilar da Silva, Maiza Araújo Cordão, Natália Ferreira Negreiros, Radmila Raianni Alves Ribeiro, Myrella Cariry Lira, et al.

    Viscosity is the main parameter studied in liquid and semi-liquid foods and is considered an important means of characterizing fluid texture. Therefore, this study aimed to determine the influence of maltodextrin concentration on the physical, chemical, and physicochemical properties and apparent viscosity of jabuticaba pulp at different temperatures. Four formulations were evaluated with maltodextrin concentrations of 0, 15, 25, and 35%. These were characterized in terms of physical, chemical, and physicochemical parameters and bioactive compounds. The rheological behavior of the formulations was assessed at temperatures of 10, 20, and 30 °C, with rotational speeds ranging from 50 to 200 rpm, and fitted to the Casson, Herschel–Bulkley, Mizrahi–Berk, and Ostwald-de-Waele models. The formulated pulps showed altered characteristics with increasing concentrations of the additive, including reductions in water content, acidity, anthocyanins, flavonoids, and colorimetric parameters, and increases in total soluble solids and glucose. The rheological models studied showed good fits to the flow curves of jabuticaba pulps with varying maltodextrin concentrations, with the Mizrahi–Berk model providing the best fit, showing the highest coefficients of determination and the lowest root mean square deviations.

  • Open Access

    Development of fermented goat meat salami-type sausage with added rosemary extract as a natural antioxidant

    by Raimundo Bernardino Filho, Marilene da Silva Lima, Gerla Castelo Branco Chinelate, Andrea Galindo Carneiro Rosal, Daniele Silva Ribeiro, Arthur Xavier Mesquita de Queiroga, Romário Oliveira Andrade, Gustavo Santos de Lima, Thamyris Lorranne Santos Lima, Edilayane da Nóbrega Santos, et al.

    Goat meat, despite being nutritious and a good source of protein, is susceptible to lipid oxidation, a process that negatively affects its sensory and nutritional quality. This problem, which also occurs in meat products, can be minimized with the use of antioxidants, with rosemary being a promising natural alternative to replace synthetic antioxidants. The objective of this research was to develop a goat meat salami using rosemary extract as a natural antioxidant, partially replacing sodium ascorbate. Three salami formulations were developed with varying concentrations of rosemary extract and sodium ascorbate. The treatments were subjected to physical-chemical, microbiological, and sensory analyses. All formulations complied with the Technical Regulations on Identity and Quality for salamis, presented good microbiological quality, and were well accepted by tasters, emphasizing that the addition of rosemary extract did not interfere with acceptability. The results showed that the use of rosemary extract can be a viable alternative to partially replace synthetic antioxidants in salami without compromsing its nutritional, microbiological, and sensory quality.


  • Open Access

    Rheological properties of araçá-boi poles submitted to range irradiation

    by Romário Oliveira de Andrade, Inácia dos Santos Moreira, Gustavo Santos de Lima, Ana Raquel Carmo de Lima, Edilayane da Nóbrega Santos, Janaina Mendonça Soares, Raimundo Bernadino Filho, Ana Paula Trindade Rocha, Josivanda Palmeira Gomes, Katcilanya Menezes de Almeida, et al.

    The aim of this work was to evaluate the biotite compounds and verify the rheological behavior of manioc pulp treated with different doses of gamma radiation. The rheological parameters obtained were shear stress, strain rate, and apparent viscosity, in triplicate, for the arapa (2, 3, 4 kGy) and non-irradiated samples (control), using a Digital Viscometer II + PRO, Regular Viscometer Torque digital Brookfield viscometer, at rotational speeds of 5, 10, 20, 40, 60, 80, 100, 120, 140, 150, 160, 180, and 200 rpm, and temperatures of 5, 15, 25, 35, 45, 55, and 65°C, measured with the aid of a thermostat, at ambient atmospheric pressure. It was verified that there was no significant loss in flavonoid values; however, a decrease occurred with the application of the treatments, when compared to the control treatment. This fact may be due to the breakdown of the instability of some active compounds when exposed to ultraviolet and visible light or other sources of ionizing radiation. It was verified that after the application of the doses, the microstructure presented differentiated ramifications when compared with the control treatment. The processing of food leads to the destruction and reconstitution of the microstructure, which can be viewed as a series of restructuring and reorganization operations. Although there was a slight reduction in the flavonoid content with the doses tested, the use of the irradiation treatment is still feasible for this product. The physicochemical properties and bioactive compound characteristics of the araçá-boi pulp were maintained. Additionally, the irradiation process did not affect the rheological behavior of the ox spider pulps.

  • Open Access

    Evaluation of the freezing kinetics of araçá-boi pulp formulated with different maltodextrin concentrations

    by Romário Oliveira de Andrade, Charlene Maria de Alcântara, Inácia dos Santos Moreira, Gustavo Santos de Lima, Francislaine Suélia dos Santos, Thamyris Lorrane Santos Lima, Ana Raquel Carmo de Lima, Janaina Mendonça Soares, Newtton Carlos Santos, Raimundo Bernardino Filho, et al.

    This study aimed to evaluate the freezing kinetics of araçá-boi pulp at −30°C with different concentrations of maltodextrin. Formulations containing different concentrations (0, 7, 14, and 21%) of dextrose equivalent 10 maltodextrins were prepared. The pulps were characterized based on the following parameters: soluble solids, pH, titratable acidity, soluble solids/titratable acidity ratio, vitamin C, flavonoids, diffusion coefficient, model coefficient, effective diffusivity, average effective diffusivity, coefficient of determination, standard error of estimate, and mean relative error. For the freezing kinetics, a hole was made in the geometric center of the samples, and a thermocouple was inserted to monitor the internal temperature, while another thermocouple was placed inside the freezing unit to monitor the freezing medium, determining the thermal equilibrium point at −30°C. The Fourier model applied to the experimental data showed coefficients of determination above 98% and low standard error of estimate and mean relative error values. The pH increased with higher maltodextrin concentrations, ranging from 2.46 to 2.55. Vitamin C content decreased as maltodextrin concentration increased, with the 14 and 21% formulations showing the lowest vitamin C values. The freezing curve was similar to that observed for pure water, allowing for the identification of the three stages involved in the water-to-ice phase transition. The freezing time increased proportionally with the addition of maltodextrin, with the longest times observed for the 21% maltodextrin formulation and the shortest for the control (0% maltodextrin) at −30°C.

  • Open Access

    Scientific Production on Rennet Cheese: Bibliometric Study, Impact, and Trends in the Web of Science Database

    by Neila Lidiany Ribeiro, Gean Carlos Targino Paixão, Katcilanya Menezes de Almeida, Romário Oliveira de Andrade, Maíza Araújo Cordão, Júlio César Bezerra Vilar da Silva, Natalia Ferreira Negreiros, Edilayane da Nóbrega Santos, Radmila Raianni Alves Ribeiro, Myrella Cariry Lira, et al.

    The objective was to analyze, through a bibliometric review, the evolution of scientific production on coalho cheese, with an emphasis on studies involving goat’s milk, as well as its functional and probiotic properties, highlighting research trends, key authors, institutions, and countries active in the field. The chosen database was Web of Science, due to its high relevance in the academic field. The research was conducted during the first week of June 2025, using the terms "coalho cheese" or "rennet cheese" as a topic filter, searching within titles, abstracts, and keywords. The search resulted in a total of 176 documents related to the investigated topic. Of these, the majority consists of articles, totaling 164. Additionally, seven review articles were found, along with one meeting abstract, one note, and five documents classified as procedural papers. The sum of these classifications exceeds the 176 returned documents, which can be explained by the fact that the database assigned multiple classifications to some of them. The predominant language found is English, with 149 documents, followed by Portuguese with 21. There are also two documents in Russian and two in Spanish, as well as one in German and one in Polish. Based on data analysis, research on coalho cheese has expanded significantly in recent decades, with a substantial increase in the number of publications and citations. Brazil stands out as the main research center for this product, reflecting its cultural, economic, and scientific relevance in the country.


  • Open Access

    Scientific overview of Buchada: trends and impact on academic production

    by Neila Lidiany Ribeiro, Gean Carlos Targino Paixão, Katcilanya Menezes De Almeida, Romário Oliveira de Andrade, Thamirys Lorranne Santos Lima, Maiza Araújo Cordão, Josiane Veloso da Silva, Ana Jaqueline Cavalcante Muniz, Júlio César Bezerra Vilar da Silva, Natalia Ferreira Negreiros, et al.

    This study analyzed scientific research on buchada, a traditional dish from Northeast Brazil, highlighting its low academic and international representation. A total of 21 documents were identified in the Scopus database between 2004 and 2024, mainly concentrated in federal universities in the Northeast, such as the Universidade Federal da Paraíba and the Universidade Federal Rural de Pernambuco. International collaboration is limited, with only one study conducted in partnership with Spain. Journal analysis revealed that 15 journals have published studies on the topic, with the Revista Brasileira de Zootecnia being the most cited. The presence of Food Science and Technology (Brazil) suggests opportunities for research on food safety and microbiological quality. The five most-cited articles discuss dietary strategies and their effects on the organs and viscera of goats and sheep, while few studies focus on the microbiological quality of buchada. Food safety and technological innovation represent promising areas to enhance the appreciation of this product. This study reinforces the need to expand interdisciplinary research, encourage international collaborations, and develop improvements in buchada preservation. Such initiatives could strengthen its academic and economic significance, fostering greater recognition of this traditional food in Brazil and abroad.

  • Open Access

    Development and Application of Biodegradable Pectin/Carboxymethylcellulose Films with Cinnamon Essential Oil and Cold Plasma Modification for Chicken Meat Preservation

    by Newton Carlos Santos, Raphael L. J. Almeida, Gabriel M. da Silva, Maria T. S. da Fonseca, Cosme M. S. Farias, Virgínia M. de A. Silva, Fábio G. Teles, Victor H. de A. Ribeiro, Kalinny de A. Alves, Railene H. C. R. Araújo, et al.

    The present study aimed to develop biodegradable films formulated with pectin/carboxymethyl cellulose (CMC) and cinnamon essential oil, investigating the effects of CP treatment time on the properties of the films. The developed films were used as packaging to evaluate the shelf life of chicken meat. Biodegradable films were produced from a film-forming solution containing pectin/CMC, glycerol (30%), and cinnamon essential oil (2%). All formulations included the essential oil, and the control group corresponded to the film that was not subjected to CP treatment. The CP treatments were applied at 22.5 L/min, 20 kV, and 80 kHz for 10, 20, and 30 min. The results showed that increasing CP treatment time led to a progressive reduction in apparent viscosity, indicating improved homogeneity of the polymer system. Hydrophobicity increased with treatment time, as shown by a higher contact angle (from 51.15° to 62.38°), resulting in lower water solubility. Mechanical properties were also enhanced, with tensile strength rising from 3.29 MPa to 6.74 MPa after 30 min of CP. Biodegradability improved with treatment time, reaching 99.51% mass loss after 15 days for the longest exposure. Films produced from the solution treated for 30 min (FCP30) were most effective in extending the shelf life of chicken breast fillets, reducing lipid oxidation (TBARS: 61.9%), peroxide content (58.7%), and microbial spoilage (TVB-N: 59.2%) compared to the untreated film. Overall, the results highlight the importance of CP treatment time as a key factor in enhancing film performance, supporting its application in sustainable active packaging.


  • Open Access

    Análise do perfil dos consumidores de água purificada em estabelecimentos tipo chafarizes eletrônicos na Cidade do Assú, Estado do Rio Grande do Norte (RN), Brasil

    by Francisco Cesino de Medeiros Júnior, Débora Rayane Frutuoso Guilherme, Mayara da Cunha Cruz, Stephany Kethellyn Alves Xavier, Francisco Jobielson da Silva, Maria da Glória Gomes de Brito, Romário Oliveira de Andrade

    Diante do aumento da procura e comercialização da água purificada em chafariz eletrônico no município de Assú-RN, o objetivo da realização desta pesquisa foi de analisar o perfil dos consumidores de água purificada em estabelecimentos tipo chafariz eletrônico na cidade do Assú - RN. Foi realizada uma investigação social (realizada com pessoas), uma pesquisa exploratória com análise qualitativa e quantitativa através de um questionário para identificar um conjunto de características que definem hábitos e comportamentos preferidos relacionados a um determinado produto. Para isso, foram desenvolvidas 16 perguntas sobre a rotina de compra desta água e na sequência aplicadas aleatoriamente à um público totalizando 100 indivíduos que afirmaram ser consumidores deste produto. Quanto aos resultados, observou-se que o principal motivo para o consumo desta água foi o baixo custo, com relação a melhor maneira de higienizar o garrafão, verificou-se o uso do sabão, e a maioria desconhece existir fiscalização neste estabelecimento. Muitos consumidores tem dificuldade em seguir as instruções de higiene e de manipulação expostas pelo estabelecimento, assim como, o próprio chafariz eletrônico não facilita ou incentiva a prática desta higienização, como por exemplo, fornecer álcool 70 ºGL. Com isso, os consumidores devem ter uma atenção redobrada durante todo o processo de compra e aquisição da água potável, principalmente em estabelecimentos tipos chafarizes eletrônicos, para não comprometer o produto quanto as condições de contaminação e consequentemente vir a ter algum problema de saúde.


  • Open Access

    A New Empirical Model for Predicting Intermittent and Continuous Drying of “Neve” Melon (Cucumis melo sp.) Seeds

    by Renato Costa da Silva, Wilton Pereira da Silva, Josivanda Palmeira Gomes, Alexandre José de Melo Queiroz, Rossana Maria Feitosa de Figueirêdo, Antonio Gilson Barbosa de Lima, Ana Paula Trindade Rocha, Laerson Duarte da Silva, João Paulo de Lima Ferreira, Dyego da Costa Santos, et al.

    The objective of this work was to intermittently and continuously dry “Neve” melon seeds and study their behavior. The seeds were dried in a fixed-bed dryer at a temperature of 60 °C under the influence of air velocity of 1 m s−1, followed by the prediction of drying kinetics, including that of intermittent processes with its effective time (pseudo-continuous drying) and tempering time (intermittent drying). The dried seeds were crushed to produce flour. The flours were evaluated for physicochemical parameters. To describe drying kinetics (continuous and intermittent drying) of “Neve” melon seeds, empirical models were used, including a new model proposed in this article to describe intermittent drying when the period of intermittence is included in the process. An optimization software was developed (LS Optimizer) and used to determine parameters (and their uncertainties) of the intermittent drying. The parameters of empirical models, used to describe continuous and pseudo-continuous drying, were determined by LAB Fit Curve Fitting Software. The Page model was the one that best fitted in the prediction of the experimental data of continuous and pseudo-continuous drying kinetics of seeds. A new model proposed in this work, based on Page and Lewis equations, was able to predict the kinetics of intermittent drying processes including the tempering time. The flours showed moisture content below 6%, and intermittent drying preserved proteins and lipids more than continuous drying, especially with drying and tempering periods of 10 and 20 min, respectively.