DSDirk Sutter

Dirk Sutter

*This is an algorithmically generated author record based on publicly available information.

Dirk Sutter has a total of 291 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ultrafast thin-disk multi-pass amplifier system providing 1.9 kW of average output power and pulse energies in the 10 mJ range at 1 ps of pulse duration for glass-cleaving applications

    by Thomas Dietz, Michael Jenne, Dominik Bauer, Michael Scharun, Dirk Sutter, Alexander Killi

    An ultrafast Yb-doped thin-disk multi-pass laser amplifier system with flexible parameters for material processing is reported. We can generate bursts consisting of four pulses at a distance of 20 ns and a total energy of 46.7 mJ at a repetition rate of 25 kHz. In single-pulse operation, 1.5 kW of average output is achieved at 400 kHz when optimizing for a beam quality of M2 = 1.5. Alignment for maximum output power provides 1.9 kW at the same repetition rate. All results are obtained without chirped-pulse amplification in the multi-pass set-up. The application potential of the system is demonstrated exploring its performance in materials processing of dielectrics. Cleaving of 3.8-mm-thick SCHOTT borofloat glass with a velocity of 1200 mm/s is demonstrated with 300 W of input power. Single-pass modification of 30 mm borosilicate glass is enabled with a Bessel beam at 1 kW of average power delivered by four-pulse bursts of an energy of 30 mJ.


  • Kerr-lens mode-locked thin-disk oscillator with 50% output coupling rate

    by Markus Poetzlberger, Jinwei Zhang, Sebastian Gröbmeyer, Dominik Bauer, Dirk Sutter, Jonathan Brons, Oleg Pronin

    Several approaches to power scaling of mode-locked thin-disk oscillators exist. One of these approaches is based on the increased gain provided by multiple passes through the thin-disk laser medium. For the first time, to the best of our knowledge, we applied this approach to a Kerr-lens mode-locked thin-disk oscillator. The so obtained additional gain allowed mode-locked operation with up to 50% output coupling rate. This first demonstration is of particular importance for gain media with inherently low-emission cross sections and paves the way to even more powerful Kerr-lens mode-locked thin-disk oscillators. Moreover, the experimental results indicate an increased self-amplitude modulation related to an overall increase in the soft-aperture Kerr-lens effect.


  • Open Access

    The amazing progress of high-power ultrafast thin-disk lasers

    by Clara J. Saraceno, Dirk Sutter, Thomas Metzger, Marwan Abdou Ahmed

    Ultrafast lasers continue to be at the forefront of many scientific breakthroughs and technological achievements and progress in the performance of these systems continue to open doors in many new and exciting interdisciplinary fields. In particular, in the last decade, the average power of ultrafast lasers has seen a significant increase, opening up exciting new perspectives. Among the different technologies that have shaped these advances, thin-disk lasers have generated particularly spectacular breakthroughs. We review here the latest state-of-the-art of the technology and highlight new application fields of these cutting-edge laser systems.


  • Micro-processing in the ultraviolet: UV laser applications in manufacturing consumer electronics (Conference Presentation)

    by Ulf Quentin, Florian Kanal, Dirk Sutter, Christian Stolzenburg

    The world market for laser micro-processing has seen a tremendous increase within the last 24 months triggered predominantly by large scale projects in the electronics industry. By far the largest contribution to this growth came from UV nano- and picosecond lasers for various applications for manufacturing consumer electronics devices. The process chain of flexible OLED display used in smart devices (phones, watches, tablets) is heavily relying on ultraviolet lasers: Debonding of the large display foils (typically 1500 x 1850 mm²) from the carrier glass they are produced on is a critical process since it is one of the last steps in the process chain at the peak of the added value. UV nanosecond lasers enable reliable debonding (laser lift-off) without risking any damage to the displays. Subsequently, the display cells are singulated by laser cutting. Also this process step relies heavily on UV lasers, but in this case with ultrashort pulses. The combination of ultrashort pulse duration and short wavelength allows efficient and precise cutting of these multi-layer materials without unwanted heat affected zones or even thermal damage to the electronics in the display. Various additional parts that are integrated in smart devices like polarizer foils and flexible printed circuit boards are based on multi-material foils and are cut to their net shape with UV nanosecond or ultrashort pulsed lasers. In this contribution we present an overview of the different UV laser processes and compare the process results from ns, ps and fs lasers to give an outlook on future applications.

  • TruMicro 2000: Next-generation flexible ultrashort pulse fiber lasers for scientific and industrial applications (Conference Presentation)

    by Chuong Tan, Holger Diekamp, Florian Jansen, Raphael Scelle, Dirk Sutter, Ulf Quentin, Florian Kanal, Aleksander Budnicki

    Within the last ten years, ultrashort pulsed lasers have developed from complex scientific devices to reliable industrial tools for various applications. MOPA systems with fiber amplifiers offer an excellent combination of small size, reliable design and flexible parameters. However, their power and more specifically pulse energy levels could not reach the high level of other laser designs based on disk or rod amplifiers. In the latest development generation of TRUMPF’s TruMicro 2000 series, we present an all-fiber ultrashort pulse laser with a maximum pulse energy of 100 µJ based on industrial grade technologies. The high energy level allows for efficient frequency conversion to a wavelength of 515 nm which is beneficial for numerous applications. Furthermore, the linear amplifier concept combined with intelligent electronics and software allow for flexible adaption of parameters: The laser is equipped with a sophisticated pulse-on-demand function that allows variable pulse picking from the seed frequency of 50 MHz. This bears the challenge of fluctuating pulse ensures which is overcome by a combination of measures that ensure constant pulse energies even with variable pulse distances. As a result, the laser pulses can be synchronized to external trigger signals with a time jitter as low as 30 ns. Additionally, the TruMicro 2000 offers a flexible burst mode up to 8 pulses in one burst and the pulse duration can be changed continuously from femto- to picoseconds. With a newly patented technology, the full sweep from 300 fs to 20 ps is done in less than 500 ms without any influence on beam parameters.


  • High Power and High Energy Ultrafast Disk Lasers for Industrial Applications

    by Dirk H. Sutter, Thomas Dietz, Dominik Bauer, Raphael Scelle, Alexander Budnicki, Alexander Killi, Michael Jenne, Jonas Kleiner, Daniel Flamm, Marc Sailer, et al.

    Pico- and femtosecond lasers with kilowatt average power levels that are also capable of providing multi-mJ pulse energies will be described. Well established 24/7 industrial ultrafast laser processes allow for an outlook on potential future applications.


  • Pulsed Lasers for Industrial Applications

    by Florian Jansen, Aleksander Budnicki, Dirk Sutter

    Material processing with ultrashort pulses provides the user with a variety of benefits. The significantly reduced heat affected zone and the ability to machine numerous different materials are the most striking features. The key for commercial viability of industrial ultrashort‐pulse lasers is long‐term reliability in an industrial environment in combination with sufficient parameter flexibility in terms of different pulse lengths, pulse energies, and pulse repetition rates. Trumpf's TruMicro laser portfolio is designed to fulfill these requirements by using the know‐how of many tens of thousands of operational hours for individual lasers and accumulated tens of millions of operational hours in industrial environment. The TruMicro portfolio includes nanosecond lasers of up to 2000 W average power within the TruMicro 7000 series. The ultrashort‐pulse lasers TruMicro 2000 and TruMicro 5000 currently cover a power range of 10 – 150 W and are based on fiber‐ and, respectively, thin‐disk technology.


  • Fiber laser platform for highest flexibility and reliability in industrial femtosecond micromachining: TruMicro Series 2000

    by Florian Kanal, Max Kahmann, Chuong Tan, Holger Diekamp, Florian Jansen, Raphael Scelle, Aleksander Budnicki, Dirk Sutter

    In this work we present an ultrafast laser system distinguished by its industry-ready reliability and its outstanding flexibility that allows for real-time process-inherent parameter. The robust system design and linear amplifier architecture make the all-fiber series TruMicro 2000 ideally suited for passive coupling to hollow-core delivery fibers. In addition to details on the laser system itself, various application examples are shown, including welding of different glasses and ablation of silicon carbide and silicon.


  • Material processing with fiber based ultrafast pulse delivery

    by Stefan Baumbach, Sebastian Pricking, Simone Russ, Elke Kaiser, Florian Kanal, Aleksander Budnicki, Dirk H. Sutter, Alexander Killi, Robin Stockburger, Benjamin Führa, et al.

    We report on TRUMPF´s ultrafast laser systems equipped with industrialized hollow core fiber laser light cables. Beam guidance in general by means of optical fibers, e.g. for multi kilowatt cw laser systems, has become an integral part of laser-based material processing. One advantage of fiber delivery, among others, is the mechanical separation between laser and processing head. An equally important benefit is given by the fact that the fiber end acts as an opto-mechanical fix-point close to successive optical elements in the processing head. Components like lenses, diffractive optical elements etc. can thus be designed towards higher efficiency which results in better material processing. These aspects gain increasing significance when the laser system operates in fundamental mode which is usually the case for ultrafast lasers. Through the last years beam guidance of ultrafast laser pulses by means of hollow core fiber technology established very rapidly. The combination of TRUMPF´s long-term stable ultrafast laser sources, passive fiber coupling, connector and packaging forms a flexible and powerful system for laser based material processing well suited for an industrial environment. In this article we demonstrate common material processing applications with ultrafast lasers realized with TRUMPF´s hollow core fiber delivery. The experimental results are contrasted and evaluated against conventional free space propagation in order to illustrate the performance of flexible ultrafast beam delivery.


  • kW picosecond thin-disk regenerative amplifier

    by Knut Michel, Christoph Wandt, Sandro Klingebiel, Marcel Schultze, Stephan Prinz, Catherine Y. Teisset, Sebastian P. Stark, Christian Grebing, Matthias Häfner, Robert Bessing, et al.

    TRUMPF Scientific Lasers provides ultrafast laser sources for the scientific community with high pulse energies and high average power. All systems are based on the industrialized TRUMPF thin-disk technology. Regenerative amplifiers systems with multi-millijoule pulses, kilohertz repetition rates and picosecond pulse durations are available. Record values of 220mJ at 1kHz could be demonstrated originally developed for pumping optical parametric amplifiers. The ultimate goal is to combine high energies, <100mJ per pulse, with average powers of several hundred watts to a kilowatt. Based on a regenerative amplifier containing two Ytterbium doped thin-disks operated at ambient temperature pulses with picosecond duration and more than 100mJ could be generated at a repetition rate of 10kHz reaching 1kW of average output power. This system is designed to operate at different repetition rates from 100kHz down to 5kHz so that even higher pulse energies can be reached. This type of ultrafast sources uncover new application fields in science. Laser based lightning rods, X-ray lasers and Compton backscatter sources are among them.