Charles H. Ahn
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Charles H. Ahn has a total of 111 co-authors. Here are the top co-authors by number of shared publications:
- F. J. Walker
Yale University
11 shared publications A. Posadas
Department of Applied Physics, Yale University, New Haven, CT 06520-8284, USA
4 shared publications- Ankit S. Disa
Cornell University
4 shared publications Frederick J. Walker
Department of Applied Physics, Yale University, New Haven, USA
4 shared publications- Wenzheng Wei
Department of Applied Physics, Yale University, New Haven, USA
4 shared publications - Ke Zou
University of British Columbia
3 shared publications
Latest Publications
- Open Access
- 5 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Re-entrant unconventional superconductivity induced by rare-earth substitution in Nd1-xEuxNiO2 thin films
High temperature superconductivity is typically associated with strong coupling and a large superconducting gap, yet these characteristics have not been demonstrated in the nickelates. Here, we provide experimental evidence that Eu substitution in the spacer layer of Nd1-xEuxNiO2 (NENO) thin films enhances the superconducting gap, driving the system toward a strong-coupling regime. This is accompanied by a magnetic-exchange-driven magnetic-field-enhanced superconductivity. We investigate the upper critical magnetic field, Hc2, and the superconducting gap of superconducting NENO thin films with x = 0.2 to 0.35. Magnetoresistance measurements reveal magnetic-field-enhanced superconductivity in NENO films. We interpret this phenomenon as a result of an interaction between magnetic Eu ions and superconducting states in the Ni dx2-y2 orbital. The upper critical magnetic field strongly violates the weak-coupling Pauli limit. Infrared spectroscopy confirms a large gap-to-Tc ratio \(2\Delta /{k}_{B}{T}_{{\rm{c}}}\simeq 5-6\), indicating a stronger coupling pairing mechanism in NENO relative to the Sr-doped NdNiO2. The substitution of Eu in the rare-earth layer causes pronounced modifications of the superconducting gap and magnetic interactions in Nd-based nickelates, opening new pathways to engineer high-Tc superconductivity in infinite-layer nickelates.- 5 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessRe-entrant unconventional superconductivity induced by rare-earth substitution in Nd1-xEuxNiO2 thin films
High temperature superconductivity is typically associated with strong coupling and a large superconducting gap, yet these characteristics have not been demonstrated in the nickelates. Here, we provide experimental evidence that Eu substitution in the spacer layer of Nd1-xEuxNiO2 (NENO) thin films enhances the superconducting gap, driving the system toward a strong-coupling regime. This is accompanied by a magnetic-exchange-driven magnetic-field-enhanced superconductivity. We investigate the upper critical magnetic field, Hc2, and the superconducting gap of superconducting NENO thin films with x = 0.2 to 0.35. Magnetoresistance measurements reveal magnetic-field-enhanced superconductivity in NENO films. We interpret this phenomenon as a result of an interaction between magnetic Eu ions and superconducting states in the Ni dx2-y2 orbital. The upper critical magnetic field strongly violates the weak-coupling Pauli limit. Infrared spectroscopy confirms a large gap-to-Tc ratio \(2\Delta /{k}_{B}{T}_{{\rm{c}}}\simeq 5-6\), indicating a stronger coupling pairing mechanism in NENO relative to the Sr-doped NdNiO2. The substitution of Eu in the rare-earth layer causes pronounced modifications of the superconducting gap and magnetic interactions in Nd-based nickelates, opening new pathways to engineer high-Tc superconductivity in infinite-layer nickelates. - 2 April 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (15) , 155106
Observation of orbital selective charge transfer in a interfacial two-dimensional electron gasTwo-dimensional electron gas (2DEG) states at oxide interfaces between two ferroic materials have been fertile ground to realize controllable multiferroicity. Here, we investigate the 2DEG states at the interface of ferroelectric and a magnetic layer of iron using angle-resolved photoemission spectroscopy. Orbital-selective charge transfer occurs on the surprisingly robust 2DEG. Based on first-principles calculations, we show how the interfacial hybridization can give rise to the unexpected charge transfer in the magnetic 2DEG. Our study reveals a close interplay on a 2DEG between magnetic and ferroelectric interfaces, which sheds light on future design principles of multiferroic 2DEG states.- 2 April 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (15) , 155106
Observation of orbital selective charge transfer in a interfacial two-dimensional electron gasTwo-dimensional electron gas (2DEG) states at oxide interfaces between two ferroic materials have been fertile ground to realize controllable multiferroicity. Here, we investigate the 2DEG states at the interface of ferroelectric and a magnetic layer of iron using angle-resolved photoemission spectroscopy. Orbital-selective charge transfer occurs on the surprisingly robust 2DEG. Based on first-principles calculations, we show how the interfacial hybridization can give rise to the unexpected charge transfer in the magnetic 2DEG. Our study reveals a close interplay on a 2DEG between magnetic and ferroelectric interfaces, which sheds light on future design principles of multiferroic 2DEG states.- Open Access
- 18 January 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (2)
Homoepitaxial growth of CaWO4
Rare-earth ion-doped dielectric crystals are a promising materials platform for quantum device applications due to their stable and highly coherent optical transitions. Recently, REIs in thin film form have become attractive because of their enhanced control of stoichiometry, lattice structure, and dimensionality. This flexibility provides a versatile host crystal environment. Control of surface and interface structures of host crystals at the atomic scale offers an avenue to further improve the optical properties of the system by mitigating defects, which can otherwise compromise the coherence time of quantum devices. In this work, we have investigated the impact of thermal annealing on the surface morphology of a promising host crystal, CaWO4. Our findings reveal that crystal miscut plays a significant role in determining the surface step-terrace structure at the atomic level. Additionally, by iterating an annealing-wet etch cycle, we have achieved atomically flat surfaces with a roughness of less than 0.5 Å rms over a 1 × 1 μm2 area. Homoepitaxial thin film growth using molecular beam epitaxy on an atomically flat surface of CaWO4 results in high-quality thin films. Our study establishes guiding principles to realize a novel quantum optical system based on REI-doped CaWO4 thin films.
- 18 January 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (2)
Open AccessHomoepitaxial growth of CaWO4
Rare-earth ion-doped dielectric crystals are a promising materials platform for quantum device applications due to their stable and highly coherent optical transitions. Recently, REIs in thin film form have become attractive because of their enhanced control of stoichiometry, lattice structure, and dimensionality. This flexibility provides a versatile host crystal environment. Control of surface and interface structures of host crystals at the atomic scale offers an avenue to further improve the optical properties of the system by mitigating defects, which can otherwise compromise the coherence time of quantum devices. In this work, we have investigated the impact of thermal annealing on the surface morphology of a promising host crystal, CaWO4. Our findings reveal that crystal miscut plays a significant role in determining the surface step-terrace structure at the atomic level. Additionally, by iterating an annealing-wet etch cycle, we have achieved atomically flat surfaces with a roughness of less than 0.5 Å rms over a 1 × 1 μm2 area. Homoepitaxial thin film growth using molecular beam epitaxy on an atomically flat surface of CaWO4 results in high-quality thin films. Our study establishes guiding principles to realize a novel quantum optical system based on REI-doped CaWO4 thin films.
- Open Access
- 7 July 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (27) , eadh3327
Superconducting Nd 1− x Eu x NiO 2 thin films using in situ synthesis
We report on superconductivity in Nd 1− x Eu x NiO 2 using Eu as a 4f dopant of the parent NdNiO 2 infinite-layer compound. We use an all–in situ molecular beam epitaxy reduction process to achieve the superconducting phase, providing an alternate method to the ex situ CaH 2 reduction process to induce superconductivity in the infinite-layer nickelates. The Nd 1− x Eu x NiO 2 samples exhibit a step-terrace structure on their surfaces, have a T c onset of 21 K at x = 0.25, and have a large upper critical field that may be related to Eu 4f doping.
- 7 July 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (27) , eadh3327
Open AccessSuperconducting Nd 1− x Eu x NiO 2 thin films using in situ synthesis
We report on superconductivity in Nd 1− x Eu x NiO 2 using Eu as a 4f dopant of the parent NdNiO 2 infinite-layer compound. We use an all–in situ molecular beam epitaxy reduction process to achieve the superconducting phase, providing an alternate method to the ex situ CaH 2 reduction process to induce superconductivity in the infinite-layer nickelates. The Nd 1− x Eu x NiO 2 samples exhibit a step-terrace structure on their surfaces, have a T c onset of 21 K at x = 0.25, and have a large upper critical field that may be related to Eu 4f doping.
- 31 January 2023
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 7 (1) , 013802
Solid state reduction of nickelate thin films
The square-planar nickelates are a class of superconductors analogous to the cuprates and promise to provide insight into the pairing mechanism in high-temperature superconducting oxides. The parent phase of doped superconducting films is , which is prepared by reducing Ni in films. In this paper, we develop an ultrahigh vacuum reduction method using aluminum deposited on top of the nickelates and monitor the reduction process in real time through in situ crystal truncation rod measurements and diffraction x-ray absorption near edge spectroscopy measurements across the Ni edge. We establish a relation between Ni valence and the lattice constant of and show that the process can precisely control the oxygen content in the films. Finally, we extend the reduction process to quintuple square-planar nickelates.- 31 January 2023
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 7 (1) , 013802
Solid state reduction of nickelate thin films
The square-planar nickelates are a class of superconductors analogous to the cuprates and promise to provide insight into the pairing mechanism in high-temperature superconducting oxides. The parent phase of doped superconducting films is , which is prepared by reducing Ni in films. In this paper, we develop an ultrahigh vacuum reduction method using aluminum deposited on top of the nickelates and monitor the reduction process in real time through in situ crystal truncation rod measurements and diffraction x-ray absorption near edge spectroscopy measurements across the Ni edge. We establish a relation between Ni valence and the lattice constant of and show that the process can precisely control the oxygen content in the films. Finally, we extend the reduction process to quintuple square-planar nickelates.- Open Access
- 22 August 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 121 (8)
Er-doped anatase TiO2 thin films on LaAlO3 (001) for quantum interconnects (QuICs)
Rare-earth ions (REIs) doped into solid-state crystal hosts offer an attractive platform for realizing quantum interconnects that can function as quantum memories and quantum repeaters. The 4f valence electrons of REIs are shielded by 5s and 5p electrons and undergo highly coherent transitions even when embedded in host crystals. In particular, Er3+ has an optical transition in the telecom band that is suitable for low-loss communication. Recently, REIs in thin film systems have gained interest due to potential advantages in providing a flexible host crystal environment, enabling scalable on-chip integration with other quantum devices. Here, we investigate the structural and optical properties of Er-doped anatase TiO2 thin films on LaAlO3 (001) substrates. By choosing a system with minimal lattice mismatch and adjusting Er-dopant concentration, we achieve optical inhomogeneous linewidths of 5 GHz at 4.5 K. We show that 9 nm-thick buffer and capping layers can reduce the linewidth by more than 40%, suggesting a pathway to further narrowing linewidths in this system. We also identify that Er3+ ions mainly incorporate into substitutional Ti4+ sites with non-polar D2d symmetry, which makes Er dopants insensitive to the first order to local electric fields from impurities and is desirable for coherence properties of Er3+ spins.
- 22 August 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 121 (8)
Open AccessEr-doped anatase TiO2 thin films on LaAlO3 (001) for quantum interconnects (QuICs)
Rare-earth ions (REIs) doped into solid-state crystal hosts offer an attractive platform for realizing quantum interconnects that can function as quantum memories and quantum repeaters. The 4f valence electrons of REIs are shielded by 5s and 5p electrons and undergo highly coherent transitions even when embedded in host crystals. In particular, Er3+ has an optical transition in the telecom band that is suitable for low-loss communication. Recently, REIs in thin film systems have gained interest due to potential advantages in providing a flexible host crystal environment, enabling scalable on-chip integration with other quantum devices. Here, we investigate the structural and optical properties of Er-doped anatase TiO2 thin films on LaAlO3 (001) substrates. By choosing a system with minimal lattice mismatch and adjusting Er-dopant concentration, we achieve optical inhomogeneous linewidths of 5 GHz at 4.5 K. We show that 9 nm-thick buffer and capping layers can reduce the linewidth by more than 40%, suggesting a pathway to further narrowing linewidths in this system. We also identify that Er3+ ions mainly incorporate into substitutional Ti4+ sites with non-polar D2d symmetry, which makes Er dopants insensitive to the first order to local electric fields from impurities and is desirable for coherence properties of Er3+ spins.
- 22 December 2021
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (1) , 013411
Resonant x-ray scattering method for measuring cation stoichiometry in BaSnO3 thin films
We develop a resonant scattering technique to measure cation stoichiometry of lanthanum-doped BaSnO3 (BSO) thin films on a DyScO3 substrate. Samples are grown by a hybrid molecular beam epitaxy method and display high room-temperature carrier mobilities. The measured thin films are grown with widely differing cation arrival rates, with Ba being evaporated from an elemental source and Sn from a SnO2 source. Differences in mobilities in these films may arise from differences in Ba/Sn cation stoichiometry. Owing to the similar scattering strength of the Ba and Sn cations, odd-order Bragg peaks of BSO are particularly sensitive to the material's cation stoichiometry, i.e., the Ba/Sn ratio. Sensitivity to cation stoichiometry is further enhanced using the technique of resonant x-ray scattering, which changes the scattering strength of a single element across the Ba L absorption edges. We determine that the Ba/Sn cation stoichiometry varies from unity by less than 1% for films of mobility ranging from 84.8 to 144 cm2/(V s) and conclude that the mobility of these films scales with film thickness and growth rate rather than stoichiometry.
- 22 December 2021
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (1) , 013411
Resonant x-ray scattering method for measuring cation stoichiometry in BaSnO3 thin films
We develop a resonant scattering technique to measure cation stoichiometry of lanthanum-doped BaSnO3 (BSO) thin films on a DyScO3 substrate. Samples are grown by a hybrid molecular beam epitaxy method and display high room-temperature carrier mobilities. The measured thin films are grown with widely differing cation arrival rates, with Ba being evaporated from an elemental source and Sn from a SnO2 source. Differences in mobilities in these films may arise from differences in Ba/Sn cation stoichiometry. Owing to the similar scattering strength of the Ba and Sn cations, odd-order Bragg peaks of BSO are particularly sensitive to the material's cation stoichiometry, i.e., the Ba/Sn ratio. Sensitivity to cation stoichiometry is further enhanced using the technique of resonant x-ray scattering, which changes the scattering strength of a single element across the Ba L absorption edges. We determine that the Ba/Sn cation stoichiometry varies from unity by less than 1% for films of mobility ranging from 84.8 to 144 cm2/(V s) and conclude that the mobility of these films scales with film thickness and growth rate rather than stoichiometry.
- Open Access
- 1 November 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (11) , 111106
Weak antilocalization in topological crystalline insulator SnTe films deposited using amorphous seeding on SrTiO3
Topological crystalline insulators (TCIs) promise spin-polarized or dissipationless transport, which can be controlled by crystal symmetry breaking through applied strain or electric field. To realize TCI devices with gate-controlled topological states, it is necessary to develop methods for depositing continuous and thin TCI films on substrates suitable for electric-field gating. Here, we present an optimized templating procedure for depositing single-orientation, continuous films of TCI SnTe on SrTiO3, which is an oxide with a wide bandgap and large dielectric constant suitable for gated devices. This process takes advantage of a thin SnTe template layer crystallized after amorphous deposition, with additional SnTe being grown by molecular beam epitaxy and monitored with in situ laser ellipsometry. Continuous, single-phase SnTe films with a (001) orientation relative to the SrTiO3 lattice are achieved. Magnetoconductivity measurements of SnTe films reveal a coexistence of weak antilocalization, consistent with topologically non-trivial states, and weak localization, consistent with trivial states from the bulk. This method of analysis may be suitable to analyze the magnetotransport characteristics of any topological material with carriers in both topological and trivial bulk states. The maximum phase coherence length is achieved for films thicker than 20 unit cells, which could be used for gated-SnTe devices.
- 1 November 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (11) , 111106
Open AccessWeak antilocalization in topological crystalline insulator SnTe films deposited using amorphous seeding on SrTiO3
Topological crystalline insulators (TCIs) promise spin-polarized or dissipationless transport, which can be controlled by crystal symmetry breaking through applied strain or electric field. To realize TCI devices with gate-controlled topological states, it is necessary to develop methods for depositing continuous and thin TCI films on substrates suitable for electric-field gating. Here, we present an optimized templating procedure for depositing single-orientation, continuous films of TCI SnTe on SrTiO3, which is an oxide with a wide bandgap and large dielectric constant suitable for gated devices. This process takes advantage of a thin SnTe template layer crystallized after amorphous deposition, with additional SnTe being grown by molecular beam epitaxy and monitored with in situ laser ellipsometry. Continuous, single-phase SnTe films with a (001) orientation relative to the SrTiO3 lattice are achieved. Magnetoconductivity measurements of SnTe films reveal a coexistence of weak antilocalization, consistent with topologically non-trivial states, and weak localization, consistent with trivial states from the bulk. This method of analysis may be suitable to analyze the magnetotransport characteristics of any topological material with carriers in both topological and trivial bulk states. The maximum phase coherence length is achieved for films thicker than 20 unit cells, which could be used for gated-SnTe devices.
- 21 October 2021
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 8 (4) , 041308
Epitaxial ferroelectric interfacial devices
Ferroelectric interfacial devices consist of materials systems whose interfacial electronic properties (such as a 2D electron gas or an interfacial magnetic spin configuration) are modulated by a ferroelectric layer set in its immediate vicinity. While the prototypical example of such a system is the ferroelectric field effect transistor first proposed in the 1950s, only with the recent advances in the controlled growth of epitaxial thin films and heterostructures, and the recent physical understanding down to the atomic scale of screening processes at ferroelectric-semiconducting and -metallic interfaces made possible by first principles calculations, have the conditions been met for a full development of the field. In this review, we discuss the recent advances in ferroelectric interfacial systems with emphasis on the ferroelectric control of the electronic properties of interfacial devices with well ordered (epitaxial) interfaces. In particular, we consider the cases of ferroelectric interfacial systems aimed at controlling the correlated state, including superconductivity, Mott metallic-insulator transition, magnetism, charge, and orbital order, and charge and spin transport across ferroelectric tunnel junctions. The focus is on the basic physical mechanisms underlying the emergence of interfacial effects, the nature of the ferroelectric control of the electronic state, and the role of extreme electric field gradients at the interface in giving rise to new physical phenomena. Such understanding is key to the development of ferroelectric interfacial systems with characteristics suitable for next generation electronic devices based on controlling the correlated state of matter.
- 21 October 2021
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 8 (4) , 041308
Epitaxial ferroelectric interfacial devices
Ferroelectric interfacial devices consist of materials systems whose interfacial electronic properties (such as a 2D electron gas or an interfacial magnetic spin configuration) are modulated by a ferroelectric layer set in its immediate vicinity. While the prototypical example of such a system is the ferroelectric field effect transistor first proposed in the 1950s, only with the recent advances in the controlled growth of epitaxial thin films and heterostructures, and the recent physical understanding down to the atomic scale of screening processes at ferroelectric-semiconducting and -metallic interfaces made possible by first principles calculations, have the conditions been met for a full development of the field. In this review, we discuss the recent advances in ferroelectric interfacial systems with emphasis on the ferroelectric control of the electronic properties of interfacial devices with well ordered (epitaxial) interfaces. In particular, we consider the cases of ferroelectric interfacial systems aimed at controlling the correlated state, including superconductivity, Mott metallic-insulator transition, magnetism, charge, and orbital order, and charge and spin transport across ferroelectric tunnel junctions. The focus is on the basic physical mechanisms underlying the emergence of interfacial effects, the nature of the ferroelectric control of the electronic state, and the role of extreme electric field gradients at the interface in giving rise to new physical phenomena. Such understanding is key to the development of ferroelectric interfacial systems with characteristics suitable for next generation electronic devices based on controlling the correlated state of matter.
- Open Access
- 8 January 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (2) , eabd4248
Single-crystalline epitaxial TiO film: A metal and superconductor, similar to Ti metal
Titanium monoxide (TiO), an important member of the rock salt 3d transition-metal monoxides, has not been studied in the stoichiometric single-crystal form. It has been challenging to prepare stoichiometric TiO due to the highly reactive Ti2+. We adapt a closely lattice-matched MgO(001) substrate and report the successful growth of single-crystalline TiO(001) film using molecular beam epitaxy. This enables a first-time study of stoichiometric TiO thin films, showing that TiO is metal but in proximity to Mott insulating state. We observe a transition to the superconducting phase below 0.5 K close to that of Ti metal. Density functional theory (DFT) and a DFT-based tight-binding model demonstrate the extreme importance of direct Ti–Ti bonding in TiO, suggesting that similar superconductivity exists in TiO and Ti metal. Our work introduces the new concept that TiO behaves more similar to its metal counterpart, distinguishing it from other 3d transition-metal monoxides.
- 8 January 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (2) , eabd4248
Open AccessSingle-crystalline epitaxial TiO film: A metal and superconductor, similar to Ti metal
Titanium monoxide (TiO), an important member of the rock salt 3d transition-metal monoxides, has not been studied in the stoichiometric single-crystal form. It has been challenging to prepare stoichiometric TiO due to the highly reactive Ti2+. We adapt a closely lattice-matched MgO(001) substrate and report the successful growth of single-crystalline TiO(001) film using molecular beam epitaxy. This enables a first-time study of stoichiometric TiO thin films, showing that TiO is metal but in proximity to Mott insulating state. We observe a transition to the superconducting phase below 0.5 K close to that of Ti metal. Density functional theory (DFT) and a DFT-based tight-binding model demonstrate the extreme importance of direct Ti–Ti bonding in TiO, suggesting that similar superconductivity exists in TiO and Ti metal. Our work introduces the new concept that TiO behaves more similar to its metal counterpart, distinguishing it from other 3d transition-metal monoxides.