Akanksha Kapoor
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Akanksha Kapoor has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Joel Eymery
CEA, IRIG, MEM, NRX, Université Grenoble Alpes, 17 Avenue des Martyrs, Grenoble, 38000, France
6 shared publications - Catherine Bougerol
Université Grenoble Alpes, CNRS, Institut Néel, 38000 Grenoble, France
4 shared publications - Maria Tchernycheva
Centre de Nanosciences et de Nanotechnologies, C2N, UMR 9001, CNRS, Université Paris-Saclay 1 , Palaiseau 91120
4 shared publications - Christophe Durand
Univ. Grenoble Alpes, Grenoble-INP, PHELIQS, CEA 1 , Grenoble
3 shared publications Bruno Gayral
CEA, IRIG, PHELIQS, NPSC Univ. Grenoble Alpes Grenoble 38000 France
2 shared publications- François Henry Julien
Centre de Nanosciences et de Nanotechnologies (C2N), CNRS UMR 9001, University Paris-Saclay 1 , 8 Avenue de la Vauve, 91120 Palaiseau, France
2 shared publications
Latest Publications
- 4 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Core-shell InGaN/GaN wires for flexible LEDs
Fils Core-shell InGaN / GaN pour LED flexibles: Les hétérostructures planaires à base de puits quantiques InGaN/GaN sont désormais largement utilisées dans les diodes électroluminescentes (LED). Les LED bleues et les LED blanches à phosphores sont largement commercialisées avec des rendements d’émission de lumière très élevés. Néanmoins, il reste encore des problèmes à résoudre avec ce type de dispositifs : l’émission à plus grande longueur d'onde (rouge) avec de bonnes efficacités, le problème du la chute du rendement à forte puissance (« droop efficiency ») et l’amélioration de l’extraction de la lumière. Ce travail de thèse présente l'utilisation de fils GaN ayant une hétérostructure radiale InGaN/GaN qui peut s’avérer un choix intéressant pour le développement de nouvelles LED visibles grâce à plusieurs avantages-clés : un encombrement réduit, un rapport d'aspect élevé et une grande qualité cristalline avec de faible densité de défauts. Les fils permettent également de fabriquer des LED flexibles intéressantes pour de nouvelles applications comme les écrans enroulables, les dispositifs médicaux de petite taille et flexibles, etc. Ce travail est consacré à une étude complète qui part de la croissance auto-assemblée de fils à hétérostructures InGaN/GaN radiale plan-m par la méthode d’épitaxie en phase vapeur d’organiques métalliques, jusqu’à l’intégration des fils dans des dispositifs flexibles, en étudiant en particulier des hétérostructures émettant dans le vert. L'influence d'une sous-couche InGaN et d'un espaceur GaN est spécifiquement étudiée pour améliorer l'efficacité d’émission d'un puits quantique (PQ) unique émettant dans le bleu. On constate que la présence de l’espaceur GaN est nécessaire pour obtenir une émission efficace du PQ dans le plan-m des fils de GaN, alors qu'aucun changement n'est observé en ajoutant une sous-couche d’InGaN. De plus, des LED flexibles avec différentes longueurs d'onde telles que l'émission bleue, verte et bicolore ont été réalisées en ajustant la teneur en indium à l'intérieur des hétérostructures à puits quantiques InGaN/GaN. Cette étude approfondie corrèlent les propriétés structurelles, optiques et électriques. L'utilisation de la croissance sélective est également abordée pour essayer d’améliorer les performances des LED flexibles à nanofils mais la maitrise de la reproductibilité reste difficile à contrôler. Pour obtenir un dispositif LED flexible émettant une lumière blanche, une étude d'optimisation des phosphores combinés à la LED bleue a également été réalisée.
- 4 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Core-shell InGaN/GaN wires for flexible LEDs
Fils Core-shell InGaN / GaN pour LED flexibles: Les hétérostructures planaires à base de puits quantiques InGaN/GaN sont désormais largement utilisées dans les diodes électroluminescentes (LED). Les LED bleues et les LED blanches à phosphores sont largement commercialisées avec des rendements d’émission de lumière très élevés. Néanmoins, il reste encore des problèmes à résoudre avec ce type de dispositifs : l’émission à plus grande longueur d'onde (rouge) avec de bonnes efficacités, le problème du la chute du rendement à forte puissance (« droop efficiency ») et l’amélioration de l’extraction de la lumière. Ce travail de thèse présente l'utilisation de fils GaN ayant une hétérostructure radiale InGaN/GaN qui peut s’avérer un choix intéressant pour le développement de nouvelles LED visibles grâce à plusieurs avantages-clés : un encombrement réduit, un rapport d'aspect élevé et une grande qualité cristalline avec de faible densité de défauts. Les fils permettent également de fabriquer des LED flexibles intéressantes pour de nouvelles applications comme les écrans enroulables, les dispositifs médicaux de petite taille et flexibles, etc. Ce travail est consacré à une étude complète qui part de la croissance auto-assemblée de fils à hétérostructures InGaN/GaN radiale plan-m par la méthode d’épitaxie en phase vapeur d’organiques métalliques, jusqu’à l’intégration des fils dans des dispositifs flexibles, en étudiant en particulier des hétérostructures émettant dans le vert. L'influence d'une sous-couche InGaN et d'un espaceur GaN est spécifiquement étudiée pour améliorer l'efficacité d’émission d'un puits quantique (PQ) unique émettant dans le bleu. On constate que la présence de l’espaceur GaN est nécessaire pour obtenir une émission efficace du PQ dans le plan-m des fils de GaN, alors qu'aucun changement n'est observé en ajoutant une sous-couche d’InGaN. De plus, des LED flexibles avec différentes longueurs d'onde telles que l'émission bleue, verte et bicolore ont été réalisées en ajustant la teneur en indium à l'intérieur des hétérostructures à puits quantiques InGaN/GaN. Cette étude approfondie corrèlent les propriétés structurelles, optiques et électriques. L'utilisation de la croissance sélective est également abordée pour essayer d’améliorer les performances des LED flexibles à nanofils mais la maitrise de la reproductibilité reste difficile à contrôler. Pour obtenir un dispositif LED flexible émettant une lumière blanche, une étude d'optimisation des phosphores combinés à la LED bleue a également été réalisée.
- 1 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (6) , 2485-2492
Partially self-healing flexible light-emitting diodes based on InGaN/GaN microwires
A self-healing LED architecture that integrates three main components as blue-emitting InGaN/GaN core–shell microwires, self-healing polydimethylsiloxane, and single-walled carbon nanotube electrodes positioned on the silicone matrix was developed.
- 1 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (6) , 2485-2492
Partially self-healing flexible light-emitting diodes based on InGaN/GaN microwires
A self-healing LED architecture that integrates three main components as blue-emitting InGaN/GaN core–shell microwires, self-healing polydimethylsiloxane, and single-walled carbon nanotube electrodes positioned on the silicone matrix was developed.
- 16 December 2024
- Published by Wiley in Physica Status Solidi (b)
- Vol. 262 (11)
Influence of Precursor Concentration on the Determination of AlInGaAs Solid‐State Compositions Grown by Metalorganic Vapor Phase Epitaxy
The epitaxial growth of AlInGaAs alloys on InP allows the manufacture of semiconductor lasers that emit in the wavelength range between 1200 and 1600 nm in which the optical telecommunication bands lie. These alloys are particularly well suited for manufacturing lasers intended for operation at higher temperatures. A model relating the metalorganic vapor phase epitaxy (MOVPE) growth settings for AlInGaAs on InP to the resultant bandgap energy is presented, for strained and unstrained compositions, based on a new dataset measured on epitaxial layers grown in a novel planetary epitaxy reactor, using the 12x4 inch configuration. Elemental analysis (ICP‐OES) was employed to relate the growth settings to the solid‐state composition of the resulting alloy, to ensure our model takes meaningful input. It was found that the MOVPE growth settings and the solid‐state composition as determined by ICP‐OES only showed a one‐to‐one correspondence once the right set of vapor pressure coefficients for the precursors was chosen.
- 16 December 2024
- Published by Wiley in Physica Status Solidi (b)
- Vol. 262 (11)
Influence of Precursor Concentration on the Determination of AlInGaAs Solid‐State Compositions Grown by Metalorganic Vapor Phase Epitaxy
The epitaxial growth of AlInGaAs alloys on InP allows the manufacture of semiconductor lasers that emit in the wavelength range between 1200 and 1600 nm in which the optical telecommunication bands lie. These alloys are particularly well suited for manufacturing lasers intended for operation at higher temperatures. A model relating the metalorganic vapor phase epitaxy (MOVPE) growth settings for AlInGaAs on InP to the resultant bandgap energy is presented, for strained and unstrained compositions, based on a new dataset measured on epitaxial layers grown in a novel planetary epitaxy reactor, using the 12x4 inch configuration. Elemental analysis (ICP‐OES) was employed to relate the growth settings to the solid‐state composition of the resulting alloy, to ensure our model takes meaningful input. It was found that the MOVPE growth settings and the solid‐state composition as determined by ICP‐OES only showed a one‐to‐one correspondence once the right set of vapor pressure coefficients for the precursors was chosen.
- Open Access
- 5 February 2021
- Published by Wiley in Advanced Photonics Research
- Vol. 2 (6) , 2000148
Dual‐Color Emission from Monolithic m‐Plane Core–Shell InGaN/GaN Quantum Wells
A dual‐color emission is achieved combining two monolithic sets of core–shell multiple quantum wells (MQWs) grown on GaN microwires. The shell heterostructure is composed of 3× blue MQWs and 7× green MQWs with photoluminescence emission covering 400–450 and 450–550 nm wavelength bands, respectively. Both emissions are coming from the two MQW sets grown on m‐plane sidewall surface, as revealed by cathodoluminescence mapping. Advanced structural characterization combining transmission electron microscopy and energy‐dispersive X‐ray analysis is performed on longitudinal cross‐sectional slices of the wires. Considering asymmetrical QW interface, the In content is measured to be equal to 15.7 (±0.5)% and 23.5 (±2.0)% in the first and the second MQW set consistent with the blue and green emissions. Extended defects are formed originating from the second MQW set due to higher In content. A flexible light‐emitting diode (LED) is fabricated based on these dual core–shell MQWs, showing an electroluminescence dominated by green emission due to efficient hole injection in the In‐rich second MQW set. This work opens the way for multiple color emission from core–shell MQWs for phosphor‐free nanowire‐based LED applications.
- 5 February 2021
- Published by Wiley in Advanced Photonics Research
- Vol. 2 (6) , 2000148
Open AccessDual‐Color Emission from Monolithic m‐Plane Core–Shell InGaN/GaN Quantum Wells
A dual‐color emission is achieved combining two monolithic sets of core–shell multiple quantum wells (MQWs) grown on GaN microwires. The shell heterostructure is composed of 3× blue MQWs and 7× green MQWs with photoluminescence emission covering 400–450 and 450–550 nm wavelength bands, respectively. Both emissions are coming from the two MQW sets grown on m‐plane sidewall surface, as revealed by cathodoluminescence mapping. Advanced structural characterization combining transmission electron microscopy and energy‐dispersive X‐ray analysis is performed on longitudinal cross‐sectional slices of the wires. Considering asymmetrical QW interface, the In content is measured to be equal to 15.7 (±0.5)% and 23.5 (±2.0)% in the first and the second MQW set consistent with the blue and green emissions. Extended defects are formed originating from the second MQW set due to higher In content. A flexible light‐emitting diode (LED) is fabricated based on these dual core–shell MQWs, showing an electroluminescence dominated by green emission due to efficient hole injection in the In‐rich second MQW set. This work opens the way for multiple color emission from core–shell MQWs for phosphor‐free nanowire‐based LED applications.
- 25 March 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (16) , 19092-19101
Role of Underlayer for Efficient Core–Shell InGaN QWs Grown on m-plane GaN Wire Sidewalls
Different types of buffer layers such as InGaN underlayer (UL) and InGaN/GaN superlattices are now well-known to significantly improve the efficiency of c-plane InGaN/GaN-based light-emitting diodes (LEDs). The present work investigates the role of two different kinds of pregrowth layers (low In-content InGaN UL and GaN UL namely “GaN spacer”) on the emission of the core–shell m-plane InGaN/GaN single quantum well (QW) grown around Si-doped c̅-GaN microwires obtained by silane-assisted metal organic vapor phase epitaxy. According to photo- and cathodoluminescence measurements performed at room temperature, an improved efficiency of light emission at 435 nm with internal quantum efficiency >15% has been achieved by adding a GaN spacer prior to the growth of QW. As revealed by scanning transmission electron microscopy, an ultrathin residual layer containing Si located at the wire sidewall surfaces favors the formation of high density of extended defects nucleated at the first InGaN QW. This contaminated residual incorporation is buried by the growth of the GaN spacer and avoids the structural defect formation, therefore explaining the improved optical efficiency. No further improvement is observed by adding the InGaN UL to the structure, which is confirmed by comparable values of the effective carrier lifetime estimated from time-resolved experiments. Contrary to the case of planar c-plane QW where the improved efficiency is attributed to a strong decrease of point defects, the addition of an InGaN UL seems to have no influence in the case of radial m-plane QW.
- 25 March 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (16) , 19092-19101
Role of Underlayer for Efficient Core–Shell InGaN QWs Grown on m-plane GaN Wire Sidewalls
Different types of buffer layers such as InGaN underlayer (UL) and InGaN/GaN superlattices are now well-known to significantly improve the efficiency of c-plane InGaN/GaN-based light-emitting diodes (LEDs). The present work investigates the role of two different kinds of pregrowth layers (low In-content InGaN UL and GaN UL namely “GaN spacer”) on the emission of the core–shell m-plane InGaN/GaN single quantum well (QW) grown around Si-doped c̅-GaN microwires obtained by silane-assisted metal organic vapor phase epitaxy. According to photo- and cathodoluminescence measurements performed at room temperature, an improved efficiency of light emission at 435 nm with internal quantum efficiency >15% has been achieved by adding a GaN spacer prior to the growth of QW. As revealed by scanning transmission electron microscopy, an ultrathin residual layer containing Si located at the wire sidewall surfaces favors the formation of high density of extended defects nucleated at the first InGaN QW. This contaminated residual incorporation is buried by the growth of the GaN spacer and avoids the structural defect formation, therefore explaining the improved optical efficiency. No further improvement is observed by adding the InGaN UL to the structure, which is confirmed by comparable values of the effective carrier lifetime estimated from time-resolved experiments. Contrary to the case of planar c-plane QW where the improved efficiency is attributed to a strong decrease of point defects, the addition of an InGaN UL seems to have no influence in the case of radial m-plane QW.
- 16 October 2018
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 5 (11) , 4330-4337
Green Electroluminescence from Radial m-Plane InGaN Quantum Wells Grown on GaN Wire Sidewalls by Metal–Organic Vapor Phase Epitaxy
- 16 October 2018
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 5 (11) , 4330-4337
Green Electroluminescence from Radial m-Plane InGaN Quantum Wells Grown on GaN Wire Sidewalls by Metal–Organic Vapor Phase Epitaxy
- 6 November 2017
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 50 (48) , 484001
Comprehensive analyses of core–shell InGaN/GaN single nanowire photodiodes
Single nitride nanowire core/shell n-p photodetectors are fabricated and analyzed. Nanowires consisting of an n-doped GaN stem, a radial InGaN/GaN multiple quantum well system and a p-doped GaN external shell were grown by catalyst-free metal–organic vapour phase epitaxy on sapphire substrates. Single nanowires were dispersed and the core and the shell regions were contacted with a metal and an ITO deposition, respectively, defined using electron beam lithography. The single wire photodiodes present a response in the visible to UV spectral range under zero external bias. The detector operation speed has been analyzed under different bias conditions. Under zero bias, the −3 dB cut-off frequency is ~200 Hz for small light modulations. The current generation was modeled using non-equilibrium Green function formalism, which evidenced the importance of phonon scattering for carrier extraction from the quantum wells.
- 6 November 2017
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 50 (48) , 484001
Comprehensive analyses of core–shell InGaN/GaN single nanowire photodiodes
Single nitride nanowire core/shell n-p photodetectors are fabricated and analyzed. Nanowires consisting of an n-doped GaN stem, a radial InGaN/GaN multiple quantum well system and a p-doped GaN external shell were grown by catalyst-free metal–organic vapour phase epitaxy on sapphire substrates. Single nanowires were dispersed and the core and the shell regions were contacted with a metal and an ITO deposition, respectively, defined using electron beam lithography. The single wire photodiodes present a response in the visible to UV spectral range under zero external bias. The detector operation speed has been analyzed under different bias conditions. Under zero bias, the −3 dB cut-off frequency is ~200 Hz for small light modulations. The current generation was modeled using non-equilibrium Green function formalism, which evidenced the importance of phonon scattering for carrier extraction from the quantum wells.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
InGaN/GaN nanowire flexible light emitting diodes and photodetectors
In this paper, we present our recent progress towards flexible nitride nanowire devices: we propose a method to combine high flexibility of polymer films with high quantum efficiency provided by nitride nanowires. The lift-off and transfer procedure allows to assemble free-standing layers of nanowire materials with different bandgaps without any constraint related to lattice-matching or growth condition compatibility. Following this method, we demonstrate blue, green, two-colour and white light emitting diodes as well as p-n photodiodes for integrable UVA sensors.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
InGaN/GaN nanowire flexible light emitting diodes and photodetectors
In this paper, we present our recent progress towards flexible nitride nanowire devices: we propose a method to combine high flexibility of polymer films with high quantum efficiency provided by nitride nanowires. The lift-off and transfer procedure allows to assemble free-standing layers of nanowire materials with different bandgaps without any constraint related to lattice-matching or growth condition compatibility. Following this method, we demonstrate blue, green, two-colour and white light emitting diodes as well as p-n photodiodes for integrable UVA sensors.
- 1 February 2017
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 695, 1014-1019
Exchange hardening in FePt/Fe3Pt dual exchange spring magnet: Monte Carlo modeling
- 1 February 2017
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 695, 1014-1019
Exchange hardening in FePt/Fe3Pt dual exchange spring magnet: Monte Carlo modeling
- 1 November 2016
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 418, 200-205
Origin of open recoil curves in L10-A1 FePt exchange coupled nanocomposite thin film
- 1 November 2016
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 418, 200-205
Origin of open recoil curves in L10-A1 FePt exchange coupled nanocomposite thin film