Dalia Liuzzi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dalia Liuzzi has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Sergio Rojas
Grupo de Energía y Química Sostenibles Instituto de Catálisis y Petroleoquímica (CSIC) C/Marie Curie 2 28049 Madrid Spain
8 shared publications - Cristina Peinado
Grupo de Energía y Química Sostenibles, Instituto de Catálisis y Petroleoquímica, CSIC, C/ Marie Curie 2, 28049, Madrid, Spain
4 shared publications Jurriaan Boon
3 shared publicationsMiguel A. Peña
3 shared publications- David Alfredo Pacheco Tanaka
Inorganic Membranes and Membrane Reactors, Sustainable Process Engineering, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, De Rondom 70, 5612 AP Eindhoven, The Netherlands
2 shared publications - Ekain Fernandez
Tecnalia
2 shared publications
Latest Publications
- Open Access
- 11 April 2025
- Published by Elsevier in Catalysis Today
- Vol. 455
Improved productivity in direct dimethyl ether synthesis and sorption enhanced DME synthesis using tungstosilicic acid as the acidic function
- 11 April 2025
- Published by Elsevier in Catalysis Today
- Vol. 455
Open AccessImproved productivity in direct dimethyl ether synthesis and sorption enhanced DME synthesis using tungstosilicic acid as the acidic function
- Open Access
- 19 November 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 479
Review and perspective: Next generation DME synthesis technologies for the energy transition
- 19 November 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 479
Open AccessReview and perspective: Next generation DME synthesis technologies for the energy transition
- Open Access
- 7 June 2023
- Published by Elsevier in Journal of Power Sources
- Vol. 578
Metal-doped imine frameworks for the oxygen reduction reaction in acidic media
- 7 June 2023
- Published by Elsevier in Journal of Power Sources
- Vol. 578
Open AccessMetal-doped imine frameworks for the oxygen reduction reaction in acidic media
- Open Access
Ru-M (M = Fe or Co) Catalysts with high Ru surface concentration for Fischer-Tropsch synthesis
- Open Access
- 1 December 2020
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 4
Study of catalyst bed composition for the direct synthesis of dimethyl ether from CO2-rich syngas
- 1 December 2020
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 4
Open AccessStudy of catalyst bed composition for the direct synthesis of dimethyl ether from CO2-rich syngas
- Open Access
- 21 September 2020
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 4 (11) , 5674-5681
Increasing dimethyl ether production from biomass-derived syngasviasorption enhanced dimethyl ether synthesis
Sorption Enhanced DME Synthesis (SEDMES) is a feasible approach to increase DME production from CO2-rich syngas.
- 21 September 2020
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 4 (11) , 5674-5681
Open AccessIncreasing dimethyl ether production from biomass-derived syngasviasorption enhanced dimethyl ether synthesis
Sorption Enhanced DME Synthesis (SEDMES) is a feasible approach to increase DME production from CO2-rich syngas.
- Open Access
- 22 May 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-12
Effects of support and reaction pressure for the synthesis of dimethyl ether over heteropolyacid catalysts
Dimethyl ether (DME) is an advanced second-generation biofuel produced via methanol dehydration over acid catalysts such as γ-Al2O3, at temperatures above 240 °C and pressures above 10 bar. Heteropolyacids such as tungstosilicic acid (HSiW) are Brønsted acid catalysts with higher DME production rates than γ-Al2O3, especially at low temperatures (140–180 °C). In this work, we show that the performance of supported HSiW for the production of DME is strongly affected by the nature of the support. TiO2 and SiO2 supported HSiW display the highest DME production rates of ca. 50 mmolDME/h/gHSiW. Characterization of acid sites via 1H-NMR, NH3-isotherms and NH3-adsrobed DRIFT reveal that HSiW/X have Brønsted acid sites, HSiW/TiO2 showing more and stronger sites, being the most active catalyst. Methanol production increases with T until 200 °C where a rapid decay in methanol conversion is observed. This effect is not irreversible, and methanol conversion increases to ca. 90% by increasing reaction pressure to 10 bar, with DME being the only product detected at all reaction conditions studied in this work. The loss of catalytic activity with the increasing temperature and its increasing with reaction pressure accounts to the degree of contribution of the pseudo-liquid catalysis under the reaction conditions studied.
- 22 May 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-12
Open AccessEffects of support and reaction pressure for the synthesis of dimethyl ether over heteropolyacid catalysts
Dimethyl ether (DME) is an advanced second-generation biofuel produced via methanol dehydration over acid catalysts such as γ-Al2O3, at temperatures above 240 °C and pressures above 10 bar. Heteropolyacids such as tungstosilicic acid (HSiW) are Brønsted acid catalysts with higher DME production rates than γ-Al2O3, especially at low temperatures (140–180 °C). In this work, we show that the performance of supported HSiW for the production of DME is strongly affected by the nature of the support. TiO2 and SiO2 supported HSiW display the highest DME production rates of ca. 50 mmolDME/h/gHSiW. Characterization of acid sites via 1H-NMR, NH3-isotherms and NH3-adsrobed DRIFT reveal that HSiW/X have Brønsted acid sites, HSiW/TiO2 showing more and stronger sites, being the most active catalyst. Methanol production increases with T until 200 °C where a rapid decay in methanol conversion is observed. This effect is not irreversible, and methanol conversion increases to ca. 90% by increasing reaction pressure to 10 bar, with DME being the only product detected at all reaction conditions studied in this work. The loss of catalytic activity with the increasing temperature and its increasing with reaction pressure accounts to the degree of contribution of the pseudo-liquid catalysis under the reaction conditions studied.
- Open Access
- 3 April 2020
- Published by Walter de Gruyter GmbH in Reviews in Chemical Engineering
- Vol. 38 (1) , 55-76
Advances in membranes and membrane reactors for the Fischer-Tropsch synthesis process for biofuel production
The biomass-to-liquid (BtL) process is a promising technology to obtain clean, liquid, second-generation biofuels and chemicals. The BtL process, which comprises several steps, is based upon the gasification of biomass and the catalytic transformation of the syngas that is obtained via the Fischer-Tropsch synthesis (FTS) reaction, producing a hydrocarbon pool known as syncrude. The FTS process is a well-established technology, and there are currently very large FTS plants operating worldwide that produce liquid fuels and hydrocarbons from natural gas (NG) (gas-to-liquids, GtL process) and coal (coal-to-liquids, CtL process). Due to the limited availability of local biomass, the size of the BtL plants should be downscaled compared to that of a GtL or CtL plant. Since the feasibility of the XtL (X refers to any energy source that can be converted to liquid, including coal, NG, biomass, municipal solid waste, etc.) processes is strongly influenced by the economies of scale, the viability of small-scale BtL plants can be compromised. An interesting approach to overcome this issue is to increase the productivity of the FTS process by developing reactors and catalysts with higher productivities to generate the desired product fraction. Recently, by integrating membrane reactors with the FTS process the gas feeding and separation unit have been demonstrated in a single reactor. In this review, the most significant achievements in the field of catalytic membrane reactors for the FTS process will be discussed. Different types of membranes and configurations of membrane reactors, including H2O separation and H2-feed distribution, among others, will be analyzed.
- 3 April 2020
- Published by Walter de Gruyter GmbH in Reviews in Chemical Engineering
- Vol. 38 (1) , 55-76
Open AccessAdvances in membranes and membrane reactors for the Fischer-Tropsch synthesis process for biofuel production
The biomass-to-liquid (BtL) process is a promising technology to obtain clean, liquid, second-generation biofuels and chemicals. The BtL process, which comprises several steps, is based upon the gasification of biomass and the catalytic transformation of the syngas that is obtained via the Fischer-Tropsch synthesis (FTS) reaction, producing a hydrocarbon pool known as syncrude. The FTS process is a well-established technology, and there are currently very large FTS plants operating worldwide that produce liquid fuels and hydrocarbons from natural gas (NG) (gas-to-liquids, GtL process) and coal (coal-to-liquids, CtL process). Due to the limited availability of local biomass, the size of the BtL plants should be downscaled compared to that of a GtL or CtL plant. Since the feasibility of the XtL (X refers to any energy source that can be converted to liquid, including coal, NG, biomass, municipal solid waste, etc.) processes is strongly influenced by the economies of scale, the viability of small-scale BtL plants can be compromised. An interesting approach to overcome this issue is to increase the productivity of the FTS process by developing reactors and catalysts with higher productivities to generate the desired product fraction. Recently, by integrating membrane reactors with the FTS process the gas feeding and separation unit have been demonstrated in a single reactor. In this review, the most significant achievements in the field of catalytic membrane reactors for the FTS process will be discussed. Different types of membranes and configurations of membrane reactors, including H2O separation and H2-feed distribution, among others, will be analyzed.
- 15 May 2017
- Published by Springer Nature in Topics in Catalysis
- Vol. 60 (15-16) , 1183-1195
Influence of the Reduction of Graphene Oxide with Hydroiodic Acid on the Structure and Photoactivity of CdS–rGO Hybrids
- 15 May 2017
- Published by Springer Nature in Topics in Catalysis
- Vol. 60 (15-16) , 1183-1195
Influence of the Reduction of Graphene Oxide with Hydroiodic Acid on the Structure and Photoactivity of CdS–rGO Hybrids
- 1 June 2016
- Published by Elsevier in Catalysis Today
- Vol. 268, 37-45
Catalytic membrane reactor for the production of biofuels
- 1 June 2016
- Published by Elsevier in Catalysis Today
- Vol. 268, 37-45
Catalytic membrane reactor for the production of biofuels