Mei-Feng Lai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mei-Feng Lai has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Ching-Wen Lou
Asia University
8 shared publications - Jia-Horng Lin
Feng Chia University
8 shared publications - Chen-Hung Huang
Department of Aerospace and Systems Engineering, Feng Chia University, Taichung City, TAIWAN
5 shared publications - Bing-Chiuan Shiu
College of Material and Chemical Engineering, Minjiang University, Fuzhou 350108, China
4 shared publications - Bing-Chiuan Shiu
Fujian Key Laboratory of Novel Functional Fibers and Materials, Minjiang University, Fuzhou 350108, China
3 shared publications - Ming-Chun Hsieh
Department of Fiber and Composite Materials, Feng Chia University, Taichung 40768, Taiwan
2 shared publications
Latest Publications
- Open Access
Hemostasis Evaluation of Antibacterial and Highly Absorbent Composite Wound Dressings in Animal Hemostasis Models
To reduce the bleeding time and to shorten the surgery time are vital to patients’ prog-nosis, therefore, in this study, high moisture absorption nonwoven composites are proposed to attain hemostasis in time. Polyacrylate fiber and Tencel® fibers at different blending ratios (10:90, 20:80, 30:70, 40:60, and 50:50) are used to form PT composite nonwoven. Next, composed of a 50:50 ratio, PT composite nonwoven exhibits the maximal vertical wicking height of 4.4 cm along the cross direction. Additionally, the UV-Vis absorption spectra analysis shows that at absorption waves of 413–415 nm, the occurring of distinct peaks suggests the presence of nanoparticles. The XRD patterns indicate the presence of silver nanoparticles with corresponding crystal planes of characteristic peaks at (111), (200), and (220). Polyacrylate/Tencel® nonwoven composites exhibit comparable adsorption capacity of blood and water molecules. In particular, 30PT composite nonwoven outperforms the control group, exhibiting 3.8 times and 4.7 times greater the water absorption and blood absorption, respectively. Moreover, a great number of red blood cells with a size of 4–6 μm agglomerate among fibers as observed in SEM images, while 6hr-PT composite dressing demonstrates the optimal antibacterial efficacy against Escherichia coli and Staphylococcus aureus, proven by the zone of inhibition being 1.9 mm and 0.8 mm separately. When in contact with plasma, hemostasis composites have plasma hemostasis prothrombin time of 97.9%, and activated partial thromboplastin time of 96.7%. As for animal hemostasis model, the arteria over the rats’ thigh bones is cut open perpendicularly, generating mass arteria hemorrhage. To attain hemostasis, it takes 46.5% shorter time when using composite dressings (experimental group) than the control group.
Open AccessHemostasis Evaluation of Antibacterial and Highly Absorbent Composite Wound Dressings in Animal Hemostasis Models
To reduce the bleeding time and to shorten the surgery time are vital to patients’ prog-nosis, therefore, in this study, high moisture absorption nonwoven composites are proposed to attain hemostasis in time. Polyacrylate fiber and Tencel® fibers at different blending ratios (10:90, 20:80, 30:70, 40:60, and 50:50) are used to form PT composite nonwoven. Next, composed of a 50:50 ratio, PT composite nonwoven exhibits the maximal vertical wicking height of 4.4 cm along the cross direction. Additionally, the UV-Vis absorption spectra analysis shows that at absorption waves of 413–415 nm, the occurring of distinct peaks suggests the presence of nanoparticles. The XRD patterns indicate the presence of silver nanoparticles with corresponding crystal planes of characteristic peaks at (111), (200), and (220). Polyacrylate/Tencel® nonwoven composites exhibit comparable adsorption capacity of blood and water molecules. In particular, 30PT composite nonwoven outperforms the control group, exhibiting 3.8 times and 4.7 times greater the water absorption and blood absorption, respectively. Moreover, a great number of red blood cells with a size of 4–6 μm agglomerate among fibers as observed in SEM images, while 6hr-PT composite dressing demonstrates the optimal antibacterial efficacy against Escherichia coli and Staphylococcus aureus, proven by the zone of inhibition being 1.9 mm and 0.8 mm separately. When in contact with plasma, hemostasis composites have plasma hemostasis prothrombin time of 97.9%, and activated partial thromboplastin time of 96.7%. As for animal hemostasis model, the arteria over the rats’ thigh bones is cut open perpendicularly, generating mass arteria hemorrhage. To attain hemostasis, it takes 46.5% shorter time when using composite dressings (experimental group) than the control group.
- Open Access
A Study on Carbon Fiber Composites with Low-Melting-Point Polyester Nonwoven Fabric Reinforcement: A Highly Effective Electromagnetic Wave Shield Textile Material
In this study, a low-melting-point polyester nonwoven fabric (L), a nylon spacer fabric (N), and a carbon fiber woven fabric (C) are laminated in different orders and then needle-bonded at a depth of 15.0 cm to form NLC, NLN, CLC, and CLN composites with a sandwich construction. Regardless of the lamination order, four composite types exhibit high tensile strengths and tearing strengths. Based on the ASTM D4935-18 test standard, the electromagnetic wave shielding measurement is conducted in a frequency range of 1~3 GHz. The two groups—NLC and CLN—demonstrate different electromagnetic wave shields, which are −45~−65 dB for the former, and −60 dB for the latter. According to FTTS-FA-003, in the specified requirements of the test method for electromagnetic shielding textiles, the proposed composites achieve level III, which is the highest standard, and are thus qualified for use in the aviation, construction, and commerce fields.
Open AccessA Study on Carbon Fiber Composites with Low-Melting-Point Polyester Nonwoven Fabric Reinforcement: A Highly Effective Electromagnetic Wave Shield Textile Material
In this study, a low-melting-point polyester nonwoven fabric (L), a nylon spacer fabric (N), and a carbon fiber woven fabric (C) are laminated in different orders and then needle-bonded at a depth of 15.0 cm to form NLC, NLN, CLC, and CLN composites with a sandwich construction. Regardless of the lamination order, four composite types exhibit high tensile strengths and tearing strengths. Based on the ASTM D4935-18 test standard, the electromagnetic wave shielding measurement is conducted in a frequency range of 1~3 GHz. The two groups—NLC and CLN—demonstrate different electromagnetic wave shields, which are −45~−65 dB for the former, and −60 dB for the latter. According to FTTS-FA-003, in the specified requirements of the test method for electromagnetic shielding textiles, the proposed composites achieve level III, which is the highest standard, and are thus qualified for use in the aviation, construction, and commerce fields.
- Open Access
Lay-Up Compound Matrices for Application of Medical Protective Clothing: Manufacturing Techniques and Property Evaluations
Medical protective clothing is the first line of defense for medical staff, which makes the acquisition of protection and multiple function challenging. When it comes to contagious diseases, the physical properties of protective clothing are deemed the top priority and, subsequently, they have significant meaning for the structural design, production cost evaluation, convenient production, and innovation. In this study, nonwoven technology is employed to produce matrices in which mechanical properties are supported by Tencel fibers and recycled Kevlar fibers. Next, the electrostatic spinning is conducted to generate breathable and waterproof films. The nonwoven fabrics and membranes are combined to have diverse functions, forming lay-up compound matrices for medical protective clothing. Moreover, measurements are conducted to characterize the lay-up compound matrices in terms of the tensile strength, tearing strength, bursting strength, puncture resistance, stiffness, air-permeable property, surface resistance, comfort performance, sub-micron particulate filtration efficiency, and the penetration of synthetic blood. As for the nonwoven fabrics, the mechanical properties are significantly improved after Kevlar fibers are incorporated. The tensile strength is (62.6 ± 2.4) N along the machine direction (MD) and (50.1 ± 3.1) N along the cross machine direction (CD); the tearing strength is (29.5 ± 1.6) N along the MD and (43.0 ± 1.7) N along the CD; the bursting strength is (365.8 ± 5.0) kPa; and the puncture resistance is (22.6 ± 1.0) N. Moreover, the lay-up compound matrices exhibit a stiffness of (14.7 ± 0.2) cm along the MD and (14.6 ± 0.1) cm along the CD, a surface resistance of (2.85 × 109 ± 0.37 × 109) Ω, an air-permeable property of (45.4 ± 2.3) cm3/s/cm2, and sub-micron particulate filtration efficiency of over 98%. In the measurement for penetration of synthetic blood, the K40/PAN/TPU group prevents the synthetic blood from penetration. Hence, the incorporation of recycled Kevlar fibers and lay-up compound technique creates good physical properties, an appropriate comfort attribute, and functions, which suggests that this study provides a greater diversity and new concepts for the production of medical protective clothing.
Open AccessLay-Up Compound Matrices for Application of Medical Protective Clothing: Manufacturing Techniques and Property Evaluations
Medical protective clothing is the first line of defense for medical staff, which makes the acquisition of protection and multiple function challenging. When it comes to contagious diseases, the physical properties of protective clothing are deemed the top priority and, subsequently, they have significant meaning for the structural design, production cost evaluation, convenient production, and innovation. In this study, nonwoven technology is employed to produce matrices in which mechanical properties are supported by Tencel fibers and recycled Kevlar fibers. Next, the electrostatic spinning is conducted to generate breathable and waterproof films. The nonwoven fabrics and membranes are combined to have diverse functions, forming lay-up compound matrices for medical protective clothing. Moreover, measurements are conducted to characterize the lay-up compound matrices in terms of the tensile strength, tearing strength, bursting strength, puncture resistance, stiffness, air-permeable property, surface resistance, comfort performance, sub-micron particulate filtration efficiency, and the penetration of synthetic blood. As for the nonwoven fabrics, the mechanical properties are significantly improved after Kevlar fibers are incorporated. The tensile strength is (62.6 ± 2.4) N along the machine direction (MD) and (50.1 ± 3.1) N along the cross machine direction (CD); the tearing strength is (29.5 ± 1.6) N along the MD and (43.0 ± 1.7) N along the CD; the bursting strength is (365.8 ± 5.0) kPa; and the puncture resistance is (22.6 ± 1.0) N. Moreover, the lay-up compound matrices exhibit a stiffness of (14.7 ± 0.2) cm along the MD and (14.6 ± 0.1) cm along the CD, a surface resistance of (2.85 × 109 ± 0.37 × 109) Ω, an air-permeable property of (45.4 ± 2.3) cm3/s/cm2, and sub-micron particulate filtration efficiency of over 98%. In the measurement for penetration of synthetic blood, the K40/PAN/TPU group prevents the synthetic blood from penetration. Hence, the incorporation of recycled Kevlar fibers and lay-up compound technique creates good physical properties, an appropriate comfort attribute, and functions, which suggests that this study provides a greater diversity and new concepts for the production of medical protective clothing.
- Open Access
Preparation of Needleless Electrospinning Polyvinyl Alcohol/Water-Soluble Chitosan Nanofibrous Membranes: Antibacterial Property and Filter Efficiency
Electrospinning is an efficient method of producing nanofibers out of polymers that shows a great potential for the filtration territory. Featuring water-soluble chitosan (WS-CS), a low-pollution process and a self-made needleless machine, PVA/WS-CS nanofibrous membranes were prepared and evaluated for nanofiber diameter, bacteriostatic property, filtration efficiency, pressure drop, and quality factor. Test results indicate that the minimal fiber diameter was 216.58 ± 58.15 nm. Regardless of the WS-CS concentration, all of the PVA/WS-CS nanofibrous membranes attained a high porosity and a high water vapor transmission rate (WVTR), with a pore size of 12.06–22.48 nm. Moreover, the membranes also exhibit bacteriostatic efficacy against Staphylococcus aureus, an optimal quality factor of 0.0825 Pa−1, and a filtration efficiency as high as 97.0%, that is 72.5% higher than that of common masks.
Open AccessPreparation of Needleless Electrospinning Polyvinyl Alcohol/Water-Soluble Chitosan Nanofibrous Membranes: Antibacterial Property and Filter Efficiency
Electrospinning is an efficient method of producing nanofibers out of polymers that shows a great potential for the filtration territory. Featuring water-soluble chitosan (WS-CS), a low-pollution process and a self-made needleless machine, PVA/WS-CS nanofibrous membranes were prepared and evaluated for nanofiber diameter, bacteriostatic property, filtration efficiency, pressure drop, and quality factor. Test results indicate that the minimal fiber diameter was 216.58 ± 58.15 nm. Regardless of the WS-CS concentration, all of the PVA/WS-CS nanofibrous membranes attained a high porosity and a high water vapor transmission rate (WVTR), with a pore size of 12.06–22.48 nm. Moreover, the membranes also exhibit bacteriostatic efficacy against Staphylococcus aureus, an optimal quality factor of 0.0825 Pa−1, and a filtration efficiency as high as 97.0%, that is 72.5% higher than that of common masks.
- Open Access
Functional Hollow Ceramic Microsphere/Flexible Polyurethane Foam Composites with a Cell Structure: Mechanical Property and Sound Absorptivity
Noise pollution is the primary environmental issue that is increasingly deteriorated with the progress of modern industry and transportation; hence, the purpose of this study is to create flexible PU foam with mechanical properties and sound absorption. In this study, hollow ceramic microsphere (HCM) is used as the filler of polyurethane (PU) foam for mechanical reinforcement. The sound absorption efficacy of PU pores and the hollow attribute of HCM contribute to a synergistic sound absorption effect. HCM-filled PU foam is evaluated in terms of surface characteristic, mechanical properties, and sound absorption as related to the HCM content, determining the optimal functional flexible PU foam. The test results indicate that the presence of HCM strengthens the stability of the cell structure significantly. In addition, the synergistic effect can be proven by a 2.24 times greater mechanical strength and better sound absorption. Specifically, with more HCM, the flexible PU foam exhibits significantly improved sound absorption in high frequencies, suggesting that this study successfully generates functional PU foam with high mechanical properties and high sound absorption.
Open AccessFunctional Hollow Ceramic Microsphere/Flexible Polyurethane Foam Composites with a Cell Structure: Mechanical Property and Sound Absorptivity
Noise pollution is the primary environmental issue that is increasingly deteriorated with the progress of modern industry and transportation; hence, the purpose of this study is to create flexible PU foam with mechanical properties and sound absorption. In this study, hollow ceramic microsphere (HCM) is used as the filler of polyurethane (PU) foam for mechanical reinforcement. The sound absorption efficacy of PU pores and the hollow attribute of HCM contribute to a synergistic sound absorption effect. HCM-filled PU foam is evaluated in terms of surface characteristic, mechanical properties, and sound absorption as related to the HCM content, determining the optimal functional flexible PU foam. The test results indicate that the presence of HCM strengthens the stability of the cell structure significantly. In addition, the synergistic effect can be proven by a 2.24 times greater mechanical strength and better sound absorption. Specifically, with more HCM, the flexible PU foam exhibits significantly improved sound absorption in high frequencies, suggesting that this study successfully generates functional PU foam with high mechanical properties and high sound absorption.
- Open Access
Evaluations of Electrostatic Filtration Efficiency and Antibacterial Efficacy of Antibacterial Electret Polypropylene Filters: Effects of Using Low Molecular Antibacterial Agent as Additive
In recent years, air filtration has been gaining much attention, and now people are much more concerned about antibacterial filters due to the spreading of COVID-19. The electret polypropylene (PP) nonwoven fabrics possess excellent filtration efficiency but a limited antibacterial effect against S. aureus and E. coli, and therefore triclosan is used in this study. Serving as an antibacterial agent, triclosan with a low molecular weight is an effective additive for the test results, indicating that the presence of triclosan strengthens the antibacterial effects of the filters. In addition, triclosan also strengthens the PP’s crystallinity, which in turn betters the filtration efficiency of the filters concurrently. Demonstrating powerful filtration and antibacterial performances, the antibacterial electret PP filters are highly qualified for filter applications.
Open AccessEvaluations of Electrostatic Filtration Efficiency and Antibacterial Efficacy of Antibacterial Electret Polypropylene Filters: Effects of Using Low Molecular Antibacterial Agent as Additive
In recent years, air filtration has been gaining much attention, and now people are much more concerned about antibacterial filters due to the spreading of COVID-19. The electret polypropylene (PP) nonwoven fabrics possess excellent filtration efficiency but a limited antibacterial effect against S. aureus and E. coli, and therefore triclosan is used in this study. Serving as an antibacterial agent, triclosan with a low molecular weight is an effective additive for the test results, indicating that the presence of triclosan strengthens the antibacterial effects of the filters. In addition, triclosan also strengthens the PP’s crystallinity, which in turn betters the filtration efficiency of the filters concurrently. Demonstrating powerful filtration and antibacterial performances, the antibacterial electret PP filters are highly qualified for filter applications.
- Open Access
- 28 May 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (11) , 5021
Functional Antibacterial Nanometer Zinc Ion Yarns: Manufacturing Technique and Antimicrobial Efficacy against Escherichia coli
People are no longer satisfied with only comfortable textile clothing with advanced technology and elevated standard of living and, thus, are gradually preferring functional textiles. In the meanwhile, the spread of medical knowledge has educated the public about the antimicrobial concept. In this study, composed of different twist coefficients and different numbers of plies, the zinc ion twisted yarns are made into knitted fabrics. Next, the knitted fabrics are examined for water vapor transmission rate and antimicrobial efficacy. The test results indicate that the water vapor transmission rate is 1013 g/m2/day for 2Zn-0C-K and 981 g/m2/day for 3Zn-0C-K. However, a rise in the twist coefficient adversely affects the water vapor transmission rate. The fabric 2Zn-3C-K exhibits the maximal air permeability of 265 cm3/cm2/s and 3Zn-3C-K 186 cm3/cm2/s. Regardless of whether it is at OD600, colony count observation, or antibacterial rate, 3Zn-5C-K exhibits the maximal antibacterial rate with the value being 0.45 at OD600 and the optimal antimicrobial efficacy being 85%. To sum up, based on the interest of the test results, production cost, and manufacturing process evaluation, 2Zn-5C-K is the optimal nonwoven fabric that achieved the maximal effects.
- 28 May 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (11) , 5021
Open AccessFunctional Antibacterial Nanometer Zinc Ion Yarns: Manufacturing Technique and Antimicrobial Efficacy against Escherichia coli
People are no longer satisfied with only comfortable textile clothing with advanced technology and elevated standard of living and, thus, are gradually preferring functional textiles. In the meanwhile, the spread of medical knowledge has educated the public about the antimicrobial concept. In this study, composed of different twist coefficients and different numbers of plies, the zinc ion twisted yarns are made into knitted fabrics. Next, the knitted fabrics are examined for water vapor transmission rate and antimicrobial efficacy. The test results indicate that the water vapor transmission rate is 1013 g/m2/day for 2Zn-0C-K and 981 g/m2/day for 3Zn-0C-K. However, a rise in the twist coefficient adversely affects the water vapor transmission rate. The fabric 2Zn-3C-K exhibits the maximal air permeability of 265 cm3/cm2/s and 3Zn-3C-K 186 cm3/cm2/s. Regardless of whether it is at OD600, colony count observation, or antibacterial rate, 3Zn-5C-K exhibits the maximal antibacterial rate with the value being 0.45 at OD600 and the optimal antimicrobial efficacy being 85%. To sum up, based on the interest of the test results, production cost, and manufacturing process evaluation, 2Zn-5C-K is the optimal nonwoven fabric that achieved the maximal effects.
- Open Access
Evaluation of Repellent Effectiveness of Polyvinyl Alcohol/Eucalyptus globules Nanofibrous Membranes against Forcipomyia taiwana
This study aims to develop nanofibrous membranes where Eucalyptus globules oil (EGO) is wrapped in polyvinyl alcohol (PVA). The EGO-based nanofibrous membranes are then evaluated for the protection against Forcipomyia taiwana (F. taiwana). In the first stage, the PVA solutions are formulated with different concentrations and are measured for viscosity and electrical conductivity. In the next stage, PVA solution and EGO are blended at different ratios and electrospun into PVA/EGO nanofibrous membranes (i.e., EGO-based repellent). In this study, a PVA concentration of 14 wt% has a positive influence on fiber formation. Furthermore, the finest nanofibers of 291 nm are presented when the voltage is 15 kV. The repellent efficacy can reach 80% in a 60-min release when the repellent is composed of a PVA/oil ratio of 90/10. To sum up, the nanofibrous membranes of essential oil exhibit good repellent efficacy against F. taiwana and significant slow-release effect, instead of adversely affecting the cell viability.
Open AccessEvaluation of Repellent Effectiveness of Polyvinyl Alcohol/Eucalyptus globules Nanofibrous Membranes against Forcipomyia taiwana
This study aims to develop nanofibrous membranes where Eucalyptus globules oil (EGO) is wrapped in polyvinyl alcohol (PVA). The EGO-based nanofibrous membranes are then evaluated for the protection against Forcipomyia taiwana (F. taiwana). In the first stage, the PVA solutions are formulated with different concentrations and are measured for viscosity and electrical conductivity. In the next stage, PVA solution and EGO are blended at different ratios and electrospun into PVA/EGO nanofibrous membranes (i.e., EGO-based repellent). In this study, a PVA concentration of 14 wt% has a positive influence on fiber formation. Furthermore, the finest nanofibers of 291 nm are presented when the voltage is 15 kV. The repellent efficacy can reach 80% in a 60-min release when the repellent is composed of a PVA/oil ratio of 90/10. To sum up, the nanofibrous membranes of essential oil exhibit good repellent efficacy against F. taiwana and significant slow-release effect, instead of adversely affecting the cell viability.