Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


João Paulo Sardo Madi has a total of 70 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Height–diameter allometric models for commercial species in the south-western region of the Brazilian Amazon

    by Lucas Dalmolin Ciarnoschi, Sylvio Péllico Netto, Allan Libanio Pelissari, Marcus Vinicio Neves D’oLiveira, Alexandre Behling, Claiton Nardini, João Paulo Sardo Madi

  • Open Access

    Modeling tree form in forest stands of Pinus taeda L. in Southern of Brazil

    by Sylvio Péllico Netto, Flavio Roberto Stefanello, Ornélio Paulino Estevão Nhaduco, João Paulo Sardo Madi, Jimmy Javier Ocles Morales, Sebastião Rodrigo Do Remédio Souza de Oliveira, Alexandre Behling

    Biometricians have been studying tree shapes since the 18th century in Europe, initially using shape quotients. With the advent of linear regression techniques, the field evolved toward the development of volumetric models, which incorporate the effects of tree shapes into the coefficients of the fitted equations. This study presents two methodological themes: the volumetric equivalence form factor (VEFF) based on Pollanschütz concept, and the rational form factor (RFF) derived from ratio estimation. Data from 159 trees were used to fit the RFF, revealing a strong correlation with the h/d variable, indicating that the slenderness index effectively expresses tree form. Five form factor models based on shape quotients were tested, producing reliable estimates with standard errors below 10% and no bias in residuals. Among the fitted volume models, Meyer, Meyer (Mod.), Näslund, Schumacher-Hall, and an additional form factor from the Dwight volume equation were selected for their accuracy and reliability. Other volume equations, such as Takata, Stoate, Dwight, and Péllico Netto and Behling, also showed good results. The second alternative solution for the RFF provided highly reliable estimates with minimal variation in the form factor among the sampled trees. The selected volume equations and their form factors, chosen based on statistical estimates and residual evaluation, are applicable to Pinus taeda L. stands in the Midwest of Santa Catarina, Brazil.


  • Open Access

    FATORES QUE INFLUENCIAM A FORMA DAS ÁRVORES DE Tectona grandis L.F

    by João Paulo Sardo Madi, Gabriel Agostini Orso, Sebastião Rodrigo Do Remédio Souza de Oliveira, John Paul McTague, Allan Libanio Pelissari, Alexandre Behling, Samuel de Pádua Chaves Carvalho, Julio Eduardo Arce

    A forma das árvores é influenciada por condições locais, idade e por atividades silviculturais, principalmente em plantios de longa rotação, como no caso de árvores de Tectona grandis. Desta forma, objetivou-se com o presente estudo avaliar a forma das árvores mediante variáveis relacionadas ao povoamento e ao local para verificar a suas influências na forma das árvores de T. grandis. Os dados são provenientes de povoamentos com 19 anos de idade. Utilizou-se do fator de forma artificial (f) para avaliar o comportamento da forma em função das seguintes variáveis: índice de espaçamento relativo, diâmetro médio quadrático, altura dominante e idade. Foi utilizado o algoritmo de Nelder-Mead em conjunto com a análise discriminante para avaliar os grupos formados. Por meio da análise, verificou-se que o maior valor dos coeficientes canônicos das funções foi relacionado ao índice de espaçamento relativo. Ao verificar a influência do desbaste, antes e após a sua aplicação, para as diferentes classes de f, foi observado maior ocorrência de árvores em plantios após a sua aplicação, presentes na classe I (< 0,45) de f. O índice de espaçamento relativo apresentou maior influência na estratificação da variável f, o que coincidiu em árvores em áreas sob influência de desbaste. Palavras-chave: desbaste; análise discriminante; Nelder-Mead; teca. Factors influencing the form of Tectona grandis L.F. trees The form of trees is influenced by several factors, including local conditions, age, and silvicultural activities. This is particularly evident in long-rotation plantations, as exemplified by the case of Tectona grandis trees. Therefore, this study aimed to evaluate tree form using variables related to the stand and site to verify their influence on the form of T. grandis trees. The data comes from 19-year-old stands. The artificial form factor (f) was used to evaluate the behavior of the form as a function of the following variables: relative spacing index, quadratic mean diameter, dominant height and age. The Nelder-Mead algorithm was used with discriminant analysis to evaluate the groups formed. The analysis indicated that the highest value of the canonical function coefficients was related to the relative spacing index. When verifying the influence of thinning, before and after its application, for the different classes of f, a greater occurrence of trees in plantations after its application was observed in class I (< 0.45) of f. The relative spacing index showed a greater influence on the stratification of the variable f, which coincided with trees in areas under the influence of thinning. Keywords: thinning; discriminant analysis; Nelder-Mead; teak.

  • Open Access

    Estimativa do incremento diamétrico anual em remanescente natural de Floresta Ombrofila Mista

    by Gabriel Agostini Orso, João Paulo Sardo Madi, Alexandre Behling, Allan Libanio Pelissari, Afonso Figueiredo Filho, Sebastião Do Amaral Machado

    O incremento diamétrico é uma variável de complexa estimativa em florestas naturais, especialmente dada a composição de espécies e o lento crescimento das árvores. Para essas situações, algumas pesquisas têm voltado sua atenção ao emprego de modelos de crescimento de árvores individuais, aliando com estratégias de agrupamento de indivíduos ou espécies, em que o objeto de estudo é o próprio indivíduo arbóreo. Este trabalho teve como objetivo estimar o incremento diamétrico de árvores em um remanescente natural de Floresta Ombrófila Mista, visando investigar metodologias de formação de grupos de indivíduos que favoreçam a estimativa do incremento diamétrico individual. Os grupos foram formados a partir de uma metodologia em dois estágios, a primeira via diâmetro padronizado e a segunda via uma razão. relacionando diâmetro relativo, incremento diamétrico e índices de competição. O incremento diamétrico foi estimado a partir de um estimador de razão utilizado de forma a conciliar a estratégia de agrupamento. O agrupamento classificou de forma satisfatória os indivíduos, em que os índices de competição foram relevantes para essa classificação. O uso do diâmetro padronizado (dp) foi oportuno para uma melhor separação dos indivíduos. O erro de estimativa do incremento diamétrico foi de 0,0599 cm.ano-1 para os dados de treino e 0,0765 cm.ano-1 para os dados de validação. A estimativa do diâmetro futuro teve um erro médio de 4,52%. A combinação da dupla estratificação com o estimador de razão foi satisfatória para estimativa precisa dos incrementos diamétricos de todas as espécies arbóreas.

  • Open Access

    Modelagem GAMLSS no afilamento de árvores de Tectona grandis L.f

    by João Paulo Sardo Madi, John Paul McTague, Gabriel Agostini Orso, Julio Eduardo Arce, Allan Libanio Pelissari, Alexandre Behling, Rômulo Môra, Juliano Bortolini, Cyro Matheus Cometti Favalessa

    In this study we propose GAMLSS to fit taper functions. We measured 52 Tectona grandis trees for fiting of the 5th degree polynomial by multiple linear regression and by the theory of generalized additive model for location, scale and shape (GAMLSS). The goodness of fit was determined by the statistics: squared coefficient of correlation (R2), standard error of the estimate (Syx and Syx(%)), Akaike information criterion (AIC), worm plot, quantile-quantile plots, residual dispersion and statistics Deviation (Bias), Root Sum Squared Residues (RMSE) and Percentage Residues (RP). Pre-established assortment sections were assessed by numeric integrals in both adjustment methods, as well as volume and height for a given diameter of each assortment section. The classic linear model was more efficient according to R2, Syx and Syx(%). However, the GAMLSS model was more efficient according to AIC, auxiliary statistics and graphical analysis of residuals. Assessing the practical effect of the different methods, we verified no differences in the classification of the products, morever, the volume obtained from the classic linear model was 5.47% greater in relation to the GAMLSS for the first product and the heights occurrence of diameters reached up to 37 cm. The GAMLSS model, in general, presented diameter estimates with greater efficiency in estimating the actual values.

  • Open Access

    Chemical Composition and Color of Short-Rotation Teak Wood Thermally Modified in Closed and Open Systems

    by Felipe da Silva Gomes, Miquéias de Souza Reis, Anna Clara Oliveira Rupf, Paulo Henrique dos Santos Silvares, Jessica Sabrina da Silva Ferreira, Luciano da Costa Dias, João Paulo Sardo Madi, Pedro Henrique Gonzalez de Cademartori, Humberto Fantuzzi Neto, Juarez Benigno Paes, et al.

    Although the effect of thermal modification (TM) on teak wood color is well documented, few studies have been carried out on closed-system processes, and it remains unclear what the effect is of different processes on the same material. This work aimed to verify the effect of closed- and open-system processes of TM on the color of short-rotation teak wood. Thermally modified wood (TMW) was evaluated in a closed system at 160 °C (CS160) and in an open system at 185 °C and 210 °C (OS185 and OS210). We measured the moisture content (initial and final) of the wood and the corrected mass loss (CML). The chemical analyses encompassed the contents of alpha-cellulose, hemicelluloses, lignin, and extractives (total, in acetone and dichloromethane). Wood color was measured before and after TM according to the CIEL*a*b* color space. It was possible to achieve the same color using different processes of thermal modification (CS160 and OS210). TM reduced wood lightness (L*), red–green chromaticity coordinate (a*), and yellow–blue chromaticity coordinate (b*). L* and a* had the biggest and smallest variations, respectively. TMW color was significantly changed, even at the mildest condition tested (OS185, 0.33% CML).


  • Open Access

    Chemical Composition and Color of Short-Rotation Teak Wood Thermally Modified in Closed and Open Systems

    by Felipe da Silva Gomes, Miquéias de Souza Reis, Anna Clara Oliveira Rupf, Paulo Henrique dos Santos Silvares, Jessica Sabrina da Silva Ferreira, Luciano da Costa Dias, Humberto Fantuzzi Neto, Pedro Henrique Gonzalez de Cademartori, João Paulo Sardo Madi, Juarez Benigno Paes, et al.

    Although the effect of thermal modification (TM) on teak wood color is well documented, a few studies were carried out in closed system processes, as well as it remains unclear the effect of different processes on the same material. This work aimed to verify the effect of closed and open system processes of TM on the color of fast-growing teak wood. Thermally modified wood was evaluated in a closed system at 160 °C (CS160) and in an open system at 185 °C and 210 °C (OS185 and OS210). We measured the moisture content (initial and final) of wood, and the corrected mass loss (CML). The chemical analyses encompassed the contents of alpha-cellulose, hemicelluloses, lignin, and extractives (total, in acetone and dichloromethane). Wood color was measured before and after TM according to the CIEL*a*b* color space. It was possible to achieve the same color using different processes of thermal modification (CS160 and OS210). TM reduced wood lightness (L*), red-green chromaticity coordinate (a*), and yellow-blue chromaticity coordinate (b*). L* and a* had the bigger and lower variations, respectively. The color of thermally modified wood was significantly changed, even at the mildest condition tested (OS185, 0.33% CML).


  • Open Access

    DEGREE OF INFESTATION AND PREFERENCES OF HEMIPARASITES IN URBAN ARBORIZATION

    by Theonizi Angélica Silva Albuês, Daiane de Moura Borges Maria, João Paulo Sardo Madi, Sidney Fernando Caldeira, Kamila Daiany Terres da Silva

    Mistletoe is an important nutritional resource for the frugivorous ornithological fauna in several ecosystems. However, in great intensity, they can reduce the vigor of their host trees, requiring adequate management in urban afforestation, without depleting this source of food for birds. The hypothesis that there are hemiparasites with host specificity was the reason for this study. Thus, a floristic census of the trees was carried out at UFMT, campus Cuiabá; the infestation by genus of hemiparasite present was recorded, in quantity and degree of infestation, in addition to the quantification of seeds of the hemiparasite germinated without the development of the vegetative part, whose cotyledons necrotized and died. A total of 4265 tree individuals were evaluated, distributed in 46 families, in which 16,52% were identified of the genera Phoradendron, Psittacanthus, and Struthanthus, of which about 90,0% were Psittacanthus. The highest infestation occurred in 24 families, highlighting Fabaceae (28,3%) and Combretaceae (25,6%), and the species Terminalia catappa, Anadenanthera peregrina, and Vatairea macrocarpa. The presence of germinated seeds of the hemiparasite with dead cotyledons varies between tree species and between individuals of the same species. The highlight was in Rutaceae, Arecaceae, and Rubiaceae, and in the species Acrocomia aculeata, Caryocar villosum, and Genipa americana L. that present individuals with natural control potential, even with the presence of frugivorous ornithological fauna and the dispersion of the hemiparasite. In general, the intensity and degree of infestation are low, and there is no infestation in the Caryocaceae, Rutaceae, and Rubiaceae families, highlighting the species Caryocar villosum, Murraya paniculata and Alibertia edulis.

  • Relationship between woody vegetation and edaphic variables in natural forest formations of Paraguay

    by Lila Mabel Gamarra Ruiz Díaz, Lucas Henderson de Oliveira Santos, João Paulo Sardo Madi, Lidia Florencia Pérez de Molas, Édila Cristina de Souza, María Laura Quevedo Fernández, Silvia da Luz Lima Mota, Carlos Roberto Sanquetta, Samuel de Pádua Cháves e Carvalho

    Correlating vegetation data with environmental variables enables results that allow making inferences about the biological components present in these communities and thus contributing to their recovery. In this context, the objective of this study was to evaluate whether there is a correlation between soil variables, to determine whether these variables influence woody vegetation and which variables best explain this relationship. The study was carried out based on data obtained from the National Forest Inventory of Paraguay in 2015 in 5 forest strata: Dry Forest of the Chaco (BSCH), Sub-humid Flooded Forest of the Paraguay River (BSHIRP), Palmar Forest (BP), Sub-humid Forest of the Cerrado (BSHC) and Humid Forest of the Eastern Region (BHRO), totaling 36 ha sampled. Physical and chemical parameters of the soil and data of total height and diameter at 1.30 m in height (d1.30) of all living shrub-arboreal individuals with d1.30 ≥ 5 cm were used. For the sampled forest strata, the different soil variables influence the presence of the sampled species. Among soil variables, a strong positive correlation was observed between organic material and organic carbon, as well as silt and clay. In the BSCH, BSHC and BHRO strata, it was possible to attribute relationships between species and edaphic variables, where the edaphic variables that best explained these relationships were clay, sand, silt, organic material and organic carbon.


  • Open Access

    Impact of plot size on tropical forest structure and diversity estimation

    by Alan Bernardes da Silveira, Samuel de Padua Chaves e Carvalho, Marcos Felipe Nicoletti, Carlos Alberto Silva, Ronaldo Drescher, Mariana Peres de Lima Chaves e Carvalho, Joao Paulo Sardo Madi, Larissa Regina Topanotti, Walmes Marques Zeviani, Valdir Carlos Lima de Andrade

    Introduction: Inventories are essential for forest management, but, in the Amazon region, the absence of standardization produces information loss, low accuracy, and inconsistent measurements. This prevents valid comparisons and compromises the use of information in networks and software. Sampling unit size is of key importance in the inventory of native forests, particularly regarding accuracy and costs. Objective: To identify a plot size that provides adequate precision for dendrometric parameters in the Amazon. Methods: In Cotriguaçu, Mato Grosso, Brazil, we tested four plot sizes with six repetitions each: 2 500, 5 000, 7 500, and 10 000 m². We measured diameter at breast height, population density, basal area, and biomass. We applied Shannon and Jaccard indexes; Weibull 2P and Gamma functions to fit the diametric distribution; and the Akaike Information Criterion for the best model. Results: There was a directly proportional relationship between plot area and population similarity, but diversity did not indicate significant alterations. Plot size did not affect dendrometric attributes and diametric distribution. Larger plot areas led to lower coefficients of variation and smaller confidence intervals. The Gamma function was the best model to represent the distributions of different plot sizes. Conclusions: For similar forests, we recommend the 2 500 m² plot to evaluate diameter at breast height, population density, basal area, and biomass.