An-Min He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
An-Min He has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
- Pei Wang
Institute of Applied Physics and Computational Mathematics 1 , Beijing 100094
19 shared publications - Xin-Xin Wang
Institute of Applied Physics and Computational Mathematics 1 , Beijing 100094
7 shared publications Pei Wang
Inst Appl Phys & Computat Math, Beijing 100094, Peoples R China
6 shared publications- Tingting Zhou
National Key Laboratory of Computational Physics, Institute of Applied Physics and Computational Mathematics, Beijing 100094, China
4 shared publications Bao Wu
3 shared publications- Bao Wu
University of Yamanashi
3 shared publications
Latest Publications
- Open Access
Crystallographic Origins of Temperature-Dependent Strain Rate Sensitivity and Deformation Mechanism Transitions at TATB/F2314 Interfaces: A Molecular Dynamics Study
Interfaces play a critical role in the mechanical integrity of polymer-bonded explosives (PBXs) based on 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), yet how crystallographic orientation governs their temperature- and strain-rate-dependent mechanical response remains poorly understood. Here, molecular dynamics simulations were performed on interfaces between TATB and the fluoropolymer F2314, with TATB exposing the (001), (010), and (100) facets, over wide ranges of temperature and strain rate. Crystallographic orientation was found to regulate the mechanical response by determining deformation mechanisms. The edge-exposed (010) and (100) facets allowed basal-plane slip to develop within the available loading time, producing weakly temperature-dependent apparent strain rate sensitivities. In contrast, the planar (001) facet constrained basal deformation at low temperatures but underwent coupled structural rearrangement at 400 K, enabling kink band formation and increasing its rate sensitivity. Rapid loading kinetically suppressed these coordinated mechanisms and shifted deformation toward distributed molecular deformation. F2314 simultaneously accommodated heterogeneous deformation through rate- and temperature-dependent chain motion, coupling polymer relaxation to the orientation-dependent response of TATB. The competition between these processes further governed damage modes. As such, these findings establish a relationship between crystallographic geometry and interfacial deformation kinetics, providing an atomistic basis for multiscale modeling and microstructural design of TATB-based PBXs.
Open AccessCrystallographic Origins of Temperature-Dependent Strain Rate Sensitivity and Deformation Mechanism Transitions at TATB/F2314 Interfaces: A Molecular Dynamics Study
Interfaces play a critical role in the mechanical integrity of polymer-bonded explosives (PBXs) based on 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), yet how crystallographic orientation governs their temperature- and strain-rate-dependent mechanical response remains poorly understood. Here, molecular dynamics simulations were performed on interfaces between TATB and the fluoropolymer F2314, with TATB exposing the (001), (010), and (100) facets, over wide ranges of temperature and strain rate. Crystallographic orientation was found to regulate the mechanical response by determining deformation mechanisms. The edge-exposed (010) and (100) facets allowed basal-plane slip to develop within the available loading time, producing weakly temperature-dependent apparent strain rate sensitivities. In contrast, the planar (001) facet constrained basal deformation at low temperatures but underwent coupled structural rearrangement at 400 K, enabling kink band formation and increasing its rate sensitivity. Rapid loading kinetically suppressed these coordinated mechanisms and shifted deformation toward distributed molecular deformation. F2314 simultaneously accommodated heterogeneous deformation through rate- and temperature-dependent chain motion, coupling polymer relaxation to the orientation-dependent response of TATB. The competition between these processes further governed damage modes. As such, these findings establish a relationship between crystallographic geometry and interfacial deformation kinetics, providing an atomistic basis for multiscale modeling and microstructural design of TATB-based PBXs.
- 13 August 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (6)
Mechanisms of dislocation loops influencing damage evolution of single crystal copper under uniaxial and triaxial tension
Dislocation loops are typical irradiation defects that significantly influence the mechanical behavior of irradiated materials. In this work, molecular dynamics simulations are performed to investigate the influence mechanisms of dislocation loops on damage evolution of single crystal copper, with a focus on the effects of loading conditions (uniaxial and triaxial strain tension) and dislocation loop types (interstitial and vacancy loop). Under uniaxial strain tension, interstitial and vacancy loops exhibit distinct effects on initial plasticity but comparable effects on damage evolution. Vacancy loops induce plasticity earlier than interstitial loops, while interstitial loops exhibit faster plastic development once plasticity is activated, leading to comparable damage evolution at later stages. Under triaxial strain tension, voids nucleate directly at the sites of both dislocation loops. Vacancy loops induce void nucleation earlier than interstitial loops due to their pre-existing dislocation junctions, whereas the latter require dissociation to form such junctions before void nucleation. Additionally, the sensitivity of damage evolution to loop size depends on both loading conditions and loop types. These findings provide valuable insights into the irradiation defect-mediated damage behavior and offer mechanistic support for constructing theoretical models of irradiated materials under extreme conditions.
- 13 August 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (6)
Mechanisms of dislocation loops influencing damage evolution of single crystal copper under uniaxial and triaxial tension
Dislocation loops are typical irradiation defects that significantly influence the mechanical behavior of irradiated materials. In this work, molecular dynamics simulations are performed to investigate the influence mechanisms of dislocation loops on damage evolution of single crystal copper, with a focus on the effects of loading conditions (uniaxial and triaxial strain tension) and dislocation loop types (interstitial and vacancy loop). Under uniaxial strain tension, interstitial and vacancy loops exhibit distinct effects on initial plasticity but comparable effects on damage evolution. Vacancy loops induce plasticity earlier than interstitial loops, while interstitial loops exhibit faster plastic development once plasticity is activated, leading to comparable damage evolution at later stages. Under triaxial strain tension, voids nucleate directly at the sites of both dislocation loops. Vacancy loops induce void nucleation earlier than interstitial loops due to their pre-existing dislocation junctions, whereas the latter require dissociation to form such junctions before void nucleation. Additionally, the sensitivity of damage evolution to loop size depends on both loading conditions and loop types. These findings provide valuable insights into the irradiation defect-mediated damage behavior and offer mechanistic support for constructing theoretical models of irradiated materials under extreme conditions.
- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Predicting mass and velocity of micro-jetting in molten metals under secondary shock: A coupled theoretical model
Secondary shock micro-jetting critically influences material mixing in high-energy-density systems, yet predictive models that accurately describing the associated interfacial evolution and mass-velocity distribution remain underdeveloped. This work establishes a coupled model through hydrodynamic simulations and theoretical analysis, quantifying the areal mass density, maximum spike velocity, and cumulative mass-velocity distribution of secondary micro-jetting across inter-shock intervals. Key advances include a unified evolution law for the bubble-growth factor a across initial perturbations kh0, a quantitative relationship between secondary jetting mass and the defect area ahead of the secondary wave-front, a maximum spike-velocity prediction method based on an equivalent cosine perturbation tangent to the bubble base within the Richtmyer–Meshkov instability framework, and an exponential-decay function for the mass-velocity distribution over time. The model agrees well with smoothed particle hydrodynamics simulations and is preliminarily validated against secondary-impact experiments. It provides effective predictions for kh0 ≤ 0.5 under varying shock pressures and different molten metals. Developed under idealized square-wave loading and equivalent-cosine-perturbation assumptions, the model delivers essential source-term conditions for double-shock-driven mass ejection, offering critical input for simulating material mixing in inertial confinement fusion and advancing the understanding of light-heavy material mixing physics.
- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Predicting mass and velocity of micro-jetting in molten metals under secondary shock: A coupled theoretical model
Secondary shock micro-jetting critically influences material mixing in high-energy-density systems, yet predictive models that accurately describing the associated interfacial evolution and mass-velocity distribution remain underdeveloped. This work establishes a coupled model through hydrodynamic simulations and theoretical analysis, quantifying the areal mass density, maximum spike velocity, and cumulative mass-velocity distribution of secondary micro-jetting across inter-shock intervals. Key advances include a unified evolution law for the bubble-growth factor a across initial perturbations kh0, a quantitative relationship between secondary jetting mass and the defect area ahead of the secondary wave-front, a maximum spike-velocity prediction method based on an equivalent cosine perturbation tangent to the bubble base within the Richtmyer–Meshkov instability framework, and an exponential-decay function for the mass-velocity distribution over time. The model agrees well with smoothed particle hydrodynamics simulations and is preliminarily validated against secondary-impact experiments. It provides effective predictions for kh0 ≤ 0.5 under varying shock pressures and different molten metals. Developed under idealized square-wave loading and equivalent-cosine-perturbation assumptions, the model delivers essential source-term conditions for double-shock-driven mass ejection, offering critical input for simulating material mixing in inertial confinement fusion and advancing the understanding of light-heavy material mixing physics.
- Open Access
- 3 December 2025
- Published by AIP Publishing in Matter and Radiation at Extremes
- Vol. 11 (1)
Characteristics and mechanisms for a new damage region near the loading side of polycrystalline aluminum with helium bubbles under strongly decaying shock waves
The damage evolution of polycrystalline Al with helium (He) bubbles under strongly decaying shock waves is studied by molecular dynamics simulations. A new damage region is observed near the loading side of the sample, and the evolution characteristics and underlying mechanisms are elucidated. The development of damage in the new damage region begins after complete unloading of the incident shock wave and is further enhanced when the tensile stress arrives later. The damage evolution is completely controlled by the expansion–merging of He bubbles, without nucleation–growth of voids. This new damage region can be divided into two sections, each of which exhibits a unique dominant mechanism. The damage in the section closer to the loading side is due to the reverse velocity gradient formed after complete unloading of the incident shock wave, depending on the rate of decrease and the amplitude of the initial peak pressure. A high initial peak pressure that can lead to melting of material near the loading side is a necessary condition for the formation of the new damage region, since a significant reverse velocity gradient can only be established if melting occurs. The dominant mechanism in the section distant from the loading side is the action of tensile stress, associated with the profile of the incident shock wave upon reaching the free surface, which determines the material phase near the free surface. Moreover, the presence of He bubbles is another critical factor for formation of the new damage region, which does not occur in pure Al samples.
- 3 December 2025
- Published by AIP Publishing in Matter and Radiation at Extremes
- Vol. 11 (1)
Open AccessCharacteristics and mechanisms for a new damage region near the loading side of polycrystalline aluminum with helium bubbles under strongly decaying shock waves
The damage evolution of polycrystalline Al with helium (He) bubbles under strongly decaying shock waves is studied by molecular dynamics simulations. A new damage region is observed near the loading side of the sample, and the evolution characteristics and underlying mechanisms are elucidated. The development of damage in the new damage region begins after complete unloading of the incident shock wave and is further enhanced when the tensile stress arrives later. The damage evolution is completely controlled by the expansion–merging of He bubbles, without nucleation–growth of voids. This new damage region can be divided into two sections, each of which exhibits a unique dominant mechanism. The damage in the section closer to the loading side is due to the reverse velocity gradient formed after complete unloading of the incident shock wave, depending on the rate of decrease and the amplitude of the initial peak pressure. A high initial peak pressure that can lead to melting of material near the loading side is a necessary condition for the formation of the new damage region, since a significant reverse velocity gradient can only be established if melting occurs. The dominant mechanism in the section distant from the loading side is the action of tensile stress, associated with the profile of the incident shock wave upon reaching the free surface, which determines the material phase near the free surface. Moreover, the presence of He bubbles is another critical factor for formation of the new damage region, which does not occur in pure Al samples.
- Open Access
- 22 August 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (8)
A coupling model of melting and damage evolution in the spallation of tin under shock loading
To provide insight into the spallation characteristics in tin (Sn) while accounting for the melting effect induced by high pressure, a coupling model was developed utilizing a combination of equation of state (EOS), phase transition theory, damage theory, and percolation theory. Thermodynamic variables were derived by using a Hayes EOS, and melting rate and fraction were obtained by Andrews's phase transition method. To account for the temperature effect, a modified nucleation and growth model based on surface energy theory was introduced to describe the dynamic damage. The influence of melting on damage evolution was realized by using percolation theory. The model was then implemented into a one-dimensional finite element method to examine the mechanical spallation and micro-spallation behaviors of a Sn target subjected to various shock loadings. The calculated data, encompassing free surface velocity profile and spall strength, exhibit good agreement with experiments across an extensive range of load pressures up to 40 GPa. This work provides an inspiration for the study of the spall behavior of metals under varying levels of loading pressure and serves as a starting point for further investigations.
- 22 August 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (8)
Open AccessA coupling model of melting and damage evolution in the spallation of tin under shock loading
To provide insight into the spallation characteristics in tin (Sn) while accounting for the melting effect induced by high pressure, a coupling model was developed utilizing a combination of equation of state (EOS), phase transition theory, damage theory, and percolation theory. Thermodynamic variables were derived by using a Hayes EOS, and melting rate and fraction were obtained by Andrews's phase transition method. To account for the temperature effect, a modified nucleation and growth model based on surface energy theory was introduced to describe the dynamic damage. The influence of melting on damage evolution was realized by using percolation theory. The model was then implemented into a one-dimensional finite element method to examine the mechanical spallation and micro-spallation behaviors of a Sn target subjected to various shock loadings. The calculated data, encompassing free surface velocity profile and spall strength, exhibit good agreement with experiments across an extensive range of load pressures up to 40 GPa. This work provides an inspiration for the study of the spall behavior of metals under varying levels of loading pressure and serves as a starting point for further investigations.
- Open Access
- 22 May 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (20)
The mechanisms of temperature rise and wavefront broadening induced by nanoscale He bubbles in copper during shock loadings
A molecular dynamics simulation study is conducted to investigate the evolution of nanoscale helium bubbles with varying morphologies under shock wave loadings. The investigated morphologies consist of three types of ellipsoidal configurations with axes aligned with the shock propagation direction: prolate (HB-I, major axis aligned), oblate (HB-II, minor axis aligned), and spherical (HB-III, equal axes). The results show that HB-I induces the most severe temperature rise and the highest thermal energy accumulation in the copper matrix due to its largest interface curvature. When an incident shock wave enters the helium bubble, it undergoes refraction at the helium bubble interface, resulting in the broadening of the shock wave front. The broadening effect is most pronounced in HB-I compared to the other two morphologies. In addition, we compared the surface breakage behavior induced by three types of near-surface helium bubbles in copper at different impact velocities and found that HB-I was the most susceptible to induce interface damage, with the lowest particle velocity threshold for interface breakage.
- 22 May 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (20)
Open AccessThe mechanisms of temperature rise and wavefront broadening induced by nanoscale He bubbles in copper during shock loadings
A molecular dynamics simulation study is conducted to investigate the evolution of nanoscale helium bubbles with varying morphologies under shock wave loadings. The investigated morphologies consist of three types of ellipsoidal configurations with axes aligned with the shock propagation direction: prolate (HB-I, major axis aligned), oblate (HB-II, minor axis aligned), and spherical (HB-III, equal axes). The results show that HB-I induces the most severe temperature rise and the highest thermal energy accumulation in the copper matrix due to its largest interface curvature. When an incident shock wave enters the helium bubble, it undergoes refraction at the helium bubble interface, resulting in the broadening of the shock wave front. The broadening effect is most pronounced in HB-I compared to the other two morphologies. In addition, we compared the surface breakage behavior induced by three types of near-surface helium bubbles in copper at different impact velocities and found that HB-I was the most susceptible to induce interface damage, with the lowest particle velocity threshold for interface breakage.
- Open Access
- 15 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (3)
The spallation characteristics of polycrystalline aluminum with helium bubbles under a wide range of shock stresses
The spallation behavior of polycrystalline Al with helium (He) bubbles (poly Al–He) under unsupported shock loadings at a wide range of impact velocities was investigated via molecular dynamics simulations. We found that the microstructural features during shock compression and release processes for the poly Al–He are highly analogous to those observed in polycrystalline Al (poly Al), indicating that the bubbles studied here do not have a significant influence on the mechanical deformation before tension. During the tension process, the expansion-merging of He bubbles dominates damage accumulation and leads to the ultimate fracture of the metal, the same as that in a single crystal with He bubbles. The presence of grain boundaries (GBs) does not exhibit an apparent effect on the evolution of He bubbles, resulting in comparable expansion rates for the bubbles in different locations (i.e., near GBs or at grain interiors). Additionally, the nucleation of voids occurs subsequent to bubble expansion due to the much higher critical stress. Voids are preferentially nucleated on GBs when the material is solid and at liquid parts when the material is partially molten, demonstrating that GBs and melting can strongly facilitate void nucleation. However, He bubbles significantly impede void nucleation and growth, resulting in a much smaller quantity and volume of voids formed in the poly Al–He, compared to the poly Al. Furthermore, the critical stress for void nucleation and the spall strength of the metal matrix are reduced by He bubbles.
- 15 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (3)
Open AccessThe spallation characteristics of polycrystalline aluminum with helium bubbles under a wide range of shock stresses
The spallation behavior of polycrystalline Al with helium (He) bubbles (poly Al–He) under unsupported shock loadings at a wide range of impact velocities was investigated via molecular dynamics simulations. We found that the microstructural features during shock compression and release processes for the poly Al–He are highly analogous to those observed in polycrystalline Al (poly Al), indicating that the bubbles studied here do not have a significant influence on the mechanical deformation before tension. During the tension process, the expansion-merging of He bubbles dominates damage accumulation and leads to the ultimate fracture of the metal, the same as that in a single crystal with He bubbles. The presence of grain boundaries (GBs) does not exhibit an apparent effect on the evolution of He bubbles, resulting in comparable expansion rates for the bubbles in different locations (i.e., near GBs or at grain interiors). Additionally, the nucleation of voids occurs subsequent to bubble expansion due to the much higher critical stress. Voids are preferentially nucleated on GBs when the material is solid and at liquid parts when the material is partially molten, demonstrating that GBs and melting can strongly facilitate void nucleation. However, He bubbles significantly impede void nucleation and growth, resulting in a much smaller quantity and volume of voids formed in the poly Al–He, compared to the poly Al. Furthermore, the critical stress for void nucleation and the spall strength of the metal matrix are reduced by He bubbles.
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
Molecular dynamics investigation of unsupported double-shock induced micro-jet behaviors in copper containing helium bubbles
When exposed to irradiation environment, the formation of helium bubbles within metallic materials profoundly influences its surface damage. This study employs molecular dynamics simulations to investigate micro-jet behaviors of copper containing helium bubbles under twice shock loading with high pressures. The research underscores the pivotal role of the first shock-induced damaged morphology in dynamic responses during the secondary shock loading. In contrast to pure Cu, the presence of randomly distributed helium bubbles with larger size after the first shock disrupts symmetry along the shock direction, thereby amplifying transverse atom momentum and resulting in micro-jets with chaotic and unstable microstructures. Helium bubbles situated at peak position of the initial surface coalesce after the first shock, equivalent to deepen the surface perturbation of the subsequent shock. Conversely, bubbles located in surface grooves expand significantly after the second shock, thereby intensifying micro-jet growth. It has been shown that the ejecta mass after the secondary shock has also been increased due to the presence of helium bubbles, which is attributed to the larger bubble size compared to that of voids in pure copper. Similar conclusion has been drawn by increasing the time interval between the two shock loadings of the models, which prolongs the growth period of voids or bubbles after the first shock, thereby augmenting both defect volume and size and promoting enhanced mass accumulation and ejecta velocities. Overall, this study advances our understanding of the physical mechanisms governing near-surface damage in metal materials containing helium bubbles under the twice shock loading.
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
Molecular dynamics investigation of unsupported double-shock induced micro-jet behaviors in copper containing helium bubbles
When exposed to irradiation environment, the formation of helium bubbles within metallic materials profoundly influences its surface damage. This study employs molecular dynamics simulations to investigate micro-jet behaviors of copper containing helium bubbles under twice shock loading with high pressures. The research underscores the pivotal role of the first shock-induced damaged morphology in dynamic responses during the secondary shock loading. In contrast to pure Cu, the presence of randomly distributed helium bubbles with larger size after the first shock disrupts symmetry along the shock direction, thereby amplifying transverse atom momentum and resulting in micro-jets with chaotic and unstable microstructures. Helium bubbles situated at peak position of the initial surface coalesce after the first shock, equivalent to deepen the surface perturbation of the subsequent shock. Conversely, bubbles located in surface grooves expand significantly after the second shock, thereby intensifying micro-jet growth. It has been shown that the ejecta mass after the secondary shock has also been increased due to the presence of helium bubbles, which is attributed to the larger bubble size compared to that of voids in pure copper. Similar conclusion has been drawn by increasing the time interval between the two shock loadings of the models, which prolongs the growth period of voids or bubbles after the first shock, thereby augmenting both defect volume and size and promoting enhanced mass accumulation and ejecta velocities. Overall, this study advances our understanding of the physical mechanisms governing near-surface damage in metal materials containing helium bubbles under the twice shock loading.
- Open Access
- 1 December 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (12)
Laser-driven double shock loading and diagnosis technology for material ejection from surface
The physics of shock-induced ejection is a crucial phenomenon in the field of shock compression science and technology. Limited by loading methods, the previous research primarily focused on the physics of ejecta induced by single shockwave, with few data available on multiple shockwave loading conditions. To solve this problem, we proposed a double shockwave production method based on the high-intensity laser facility, which allows the interval time between the shock waves to be adjusted in the nanosecond to microsecond timescale. Meanwhile, we applied loading techniques to study the ejection behavior of metal tin and integrated photonic doppler velocimetry and high-energy x-ray radiography technology to observe the ejection process. By comparing the experimental results for single and double shockwave, the multiple shock-induced ejection features have been clearly confirmed. Our experimental results provide valuable insight into the behavior of ejecta under multiple shockwave loading conditions, which is of great significance for deepening our understanding of the ejection mechanism.
- 1 December 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (12)
Open AccessLaser-driven double shock loading and diagnosis technology for material ejection from surface
The physics of shock-induced ejection is a crucial phenomenon in the field of shock compression science and technology. Limited by loading methods, the previous research primarily focused on the physics of ejecta induced by single shockwave, with few data available on multiple shockwave loading conditions. To solve this problem, we proposed a double shockwave production method based on the high-intensity laser facility, which allows the interval time between the shock waves to be adjusted in the nanosecond to microsecond timescale. Meanwhile, we applied loading techniques to study the ejection behavior of metal tin and integrated photonic doppler velocimetry and high-energy x-ray radiography technology to observe the ejection process. By comparing the experimental results for single and double shockwave, the multiple shock-induced ejection features have been clearly confirmed. Our experimental results provide valuable insight into the behavior of ejecta under multiple shockwave loading conditions, which is of great significance for deepening our understanding of the ejection mechanism.