Xiaorui Dong
Research Subjects
Xiaorui Dong has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
- William H. Green
Massachusetts Institute of Technology
13 shared publications - Hao-Wei Pang
Massachusetts Institute of Technology
8 shared publications - Kevin A. Spiekermann
Department of Chemical Engineering
6 shared publications - Haoyang Wu
Massachusetts Institute of Technology
5 shared publications - Yunsie Chung
Department of Chemical Engineering
4 shared publications - A. Mark Payne
Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
3 shared publications
Latest Publications
- Open Access
- 30 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
QuantumPioneer: Scalable generation of quantum chemical data for solution-phase hydrogen transfer reactions
High-fidelity quantum chemical (QM) datasets that jointly resolve reaction thermochemistry, kinetics, and solvation at scale remain scarce, especially for radical chemistry. We introduce QuantumPioneer, an open-access reaction-centered QM database and workflow for small organic molecules, focused on peroxyl-mediated hydrogen atom transfer (HAT) and the corresponding homolytic bond dissociation reactions. QuantumPioneer contains 348,258 species (2–21 heavy atoms), 167,237 validated HAT transition states (TS) with corresponding reaction energies and homolytic bond dissociation energies (BDEs), and over 100 million COSMO-RS solvation free energies (∆Go_solv) and enthalpies (∆Ho_solv) across 295 solvents. The workflow uses ωB97X-D/def2-SVP geometries, DLPNO-CCSD(T)-F12d/cc-pVTZ-F12 single-point energies, empirical thermochemical corrections, transition-state theory, and COSMORS BP-TZVPD-FINE solvation in a single high-throughput pipeline. Our benchmarks show reliable accuracy, with mean absolute errors compared to experimental data of 0.82 kcal/mol for gas-phase enthalpies of formation, 1.60 kcal/mol for C–H BDEs, 1.45 kcal/mol for HAT barriers, and 0.57 kcal/mol for ∆Go_solv values. We demonstrate two predictive applications. First, we show that a combined BDE and HAT-barrier model identifies experimentally observed oxidative degradation sites in drug-like molecules with a 91% top-5 hit rate and 80% site-level recall. Second, a QM-parameterized Abraham model enables rapid solvation energy estimates at near-COSMO-RS accuracy within its training domain, reproducing ∆Go_solv and ∆Ho_solv values with MAEs of 0.16 kcal/mol and 0.18 kcal/mol, respectively, though performance on experimental ΔGo_solv values for unseen solutes was worse, with MAEs of 1.32 kcal/mol, providing a scalable template for other reaction families, unifying equilibrium species, validated TS, thermochemistry, kinetics, and solvation into one workflow.
- 30 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessQuantumPioneer: Scalable generation of quantum chemical data for solution-phase hydrogen transfer reactions
High-fidelity quantum chemical (QM) datasets that jointly resolve reaction thermochemistry, kinetics, and solvation at scale remain scarce, especially for radical chemistry. We introduce QuantumPioneer, an open-access reaction-centered QM database and workflow for small organic molecules, focused on peroxyl-mediated hydrogen atom transfer (HAT) and the corresponding homolytic bond dissociation reactions. QuantumPioneer contains 348,258 species (2–21 heavy atoms), 167,237 validated HAT transition states (TS) with corresponding reaction energies and homolytic bond dissociation energies (BDEs), and over 100 million COSMO-RS solvation free energies (∆Go_solv) and enthalpies (∆Ho_solv) across 295 solvents. The workflow uses ωB97X-D/def2-SVP geometries, DLPNO-CCSD(T)-F12d/cc-pVTZ-F12 single-point energies, empirical thermochemical corrections, transition-state theory, and COSMORS BP-TZVPD-FINE solvation in a single high-throughput pipeline. Our benchmarks show reliable accuracy, with mean absolute errors compared to experimental data of 0.82 kcal/mol for gas-phase enthalpies of formation, 1.60 kcal/mol for C–H BDEs, 1.45 kcal/mol for HAT barriers, and 0.57 kcal/mol for ∆Go_solv values. We demonstrate two predictive applications. First, we show that a combined BDE and HAT-barrier model identifies experimentally observed oxidative degradation sites in drug-like molecules with a 91% top-5 hit rate and 80% site-level recall. Second, a QM-parameterized Abraham model enables rapid solvation energy estimates at near-COSMO-RS accuracy within its training domain, reproducing ∆Go_solv and ∆Ho_solv values with MAEs of 0.16 kcal/mol and 0.18 kcal/mol, respectively, though performance on experimental ΔGo_solv values for unseen solutes was worse, with MAEs of 1.32 kcal/mol, providing a scalable template for other reaction families, unifying equilibrium species, validated TS, thermochemistry, kinetics, and solvation into one workflow.
- Open Access
- 12 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
QuantumPioneer: Scalable generation of quantum chemical data for solution-phase hydrogen transfer reactions
High-fidelity quantum chemical (QM) datasets that jointly resolve reaction thermochemistry, kinetics, and solvation at scale remain scarce, especially for radical chemistry. We introduce QuantumPioneer, an open-access reaction-centered QM database and workflow for small organic molecules, focused on peroxyl-mediated hydrogen atom transfer (HAT) and the corresponding homolytic bond dissociation reactions. QuantumPioneer contains 348,258 species (2–21 heavy atoms), 167,237 validated HAT transition states (TS) with corresponding reaction energies and homolytic bond dissociation energies (BDEs), and over 100 million COSMO-RS solvation free energies (∆Go_solv) and enthalpies (∆Ho_solv) across 295 solvents. The workflow uses ωB97X-D/def2-SVP geometries, DLPNO-CCSD(T)-F12d/def2-TZVP single-point energies, empirical thermochemical corrections, transition-state theory, and COSMORS BP-TZVPD-FINE solvation in a single high-throughput pipeline. Our benchmarks show reliable accuracy, with mean absolute errors compared to experimental data of 0.82 kcal/mol for gas-phase enthalpies of formation, 1.60 kcal/mol for C–H BDEs, 1.45 kcal/mol for HAT barriers, and 0.57 kcal/mol for ∆Go_solv values. We demonstrate two predictive applications. First, we show that a combined BDE and HAT-barrier model identifies experimentally observed oxidative degradation sites in drug-like molecules with a 91% top-5 hit rate and 80% site-level recall. Second, a QM-parameterized Abraham model enables rapid solvation energy estimates at near-COSMO-RS accuracy within its training domain, reproducing ∆Go_solv and ∆Ho_solv values with MAEs of 0.16 kcal/mol and 0.18 kcal/mol, respectively, though performance on experimental ΔGo_solv values for unseen solutes was worse, with MAEs of 1.32 kcal/mol, providing a scalable template for other reaction families, unifying equilibrium species, validated TS, thermochemistry, kinetics, and solvation into one workflow.
- 12 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessQuantumPioneer: Scalable generation of quantum chemical data for solution-phase hydrogen transfer reactions
High-fidelity quantum chemical (QM) datasets that jointly resolve reaction thermochemistry, kinetics, and solvation at scale remain scarce, especially for radical chemistry. We introduce QuantumPioneer, an open-access reaction-centered QM database and workflow for small organic molecules, focused on peroxyl-mediated hydrogen atom transfer (HAT) and the corresponding homolytic bond dissociation reactions. QuantumPioneer contains 348,258 species (2–21 heavy atoms), 167,237 validated HAT transition states (TS) with corresponding reaction energies and homolytic bond dissociation energies (BDEs), and over 100 million COSMO-RS solvation free energies (∆Go_solv) and enthalpies (∆Ho_solv) across 295 solvents. The workflow uses ωB97X-D/def2-SVP geometries, DLPNO-CCSD(T)-F12d/def2-TZVP single-point energies, empirical thermochemical corrections, transition-state theory, and COSMORS BP-TZVPD-FINE solvation in a single high-throughput pipeline. Our benchmarks show reliable accuracy, with mean absolute errors compared to experimental data of 0.82 kcal/mol for gas-phase enthalpies of formation, 1.60 kcal/mol for C–H BDEs, 1.45 kcal/mol for HAT barriers, and 0.57 kcal/mol for ∆Go_solv values. We demonstrate two predictive applications. First, we show that a combined BDE and HAT-barrier model identifies experimentally observed oxidative degradation sites in drug-like molecules with a 91% top-5 hit rate and 80% site-level recall. Second, a QM-parameterized Abraham model enables rapid solvation energy estimates at near-COSMO-RS accuracy within its training domain, reproducing ∆Go_solv and ∆Ho_solv values with MAEs of 0.16 kcal/mol and 0.18 kcal/mol, respectively, though performance on experimental ΔGo_solv values for unseen solutes was worse, with MAEs of 1.32 kcal/mol, providing a scalable template for other reaction families, unifying equilibrium species, validated TS, thermochemistry, kinetics, and solvation into one workflow.
- Open Access
- 18 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
QuantumPioneer: Scalable generation of quantum chemical data for solution-phase hydrogen transfer reactions
High-fidelity quantum chemical (QM) datasets that jointly resolve reaction thermochemistry, kinetics, and solvation at scale remain scarce, especially for radical chemistry. We introduce QuantumPioneer, an open-access reaction-centered QM database and workflow for small organic molecules, focused on peroxyl-mediated hydrogen atom transfer (HAT) and the corresponding homolytic bond dissociation reactions. QuantumPioneer contains 348,258 species (2–21 heavy atoms), 167,237 validated HAT transition states (TS) with corresponding reaction energies and homolytic bond dissociation energies (BDEs), and over 100 million COSMO-RS solvation free energies (∆Go solv) and enthalpies (∆Ho solv) across 295 solvents. The workflow uses ωB97X-D/def2-SVP geometries, DLPNO-CCSD(T)-F12d/def2-TZVP single-point energies, empirical thermochemical corrections, transition-state theory, and COSMORS BP-TZVPD-FINE solvation in a single high-throughput pipeline. Our benchmarks show reliable accuracy, with mean absolute errors compared to experimental data of 0.82 kcal/mol for gas-phase enthalpies of formation, 1.60 kcal/mol for C–H BDEs, 1.45 kcal/mol for HAT barriers, and 0.57 kcal/mol for ∆Go solv values. We demonstrate two predictive applications. First, we show that a combined BDE and HAT-barrier model identifies experimentally observed oxidative degradation sites in drug-like molecules with a 91% top-5 hit rate and 80% site-level recall. Second, a QM-parameterized Abraham model enables rapid solvation energy estimates at near-COSMO-RS accuracy within its training domain, reproducing ∆Go solv and ∆Ho solv
- 18 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessQuantumPioneer: Scalable generation of quantum chemical data for solution-phase hydrogen transfer reactions
High-fidelity quantum chemical (QM) datasets that jointly resolve reaction thermochemistry, kinetics, and solvation at scale remain scarce, especially for radical chemistry. We introduce QuantumPioneer, an open-access reaction-centered QM database and workflow for small organic molecules, focused on peroxyl-mediated hydrogen atom transfer (HAT) and the corresponding homolytic bond dissociation reactions. QuantumPioneer contains 348,258 species (2–21 heavy atoms), 167,237 validated HAT transition states (TS) with corresponding reaction energies and homolytic bond dissociation energies (BDEs), and over 100 million COSMO-RS solvation free energies (∆Go solv) and enthalpies (∆Ho solv) across 295 solvents. The workflow uses ωB97X-D/def2-SVP geometries, DLPNO-CCSD(T)-F12d/def2-TZVP single-point energies, empirical thermochemical corrections, transition-state theory, and COSMORS BP-TZVPD-FINE solvation in a single high-throughput pipeline. Our benchmarks show reliable accuracy, with mean absolute errors compared to experimental data of 0.82 kcal/mol for gas-phase enthalpies of formation, 1.60 kcal/mol for C–H BDEs, 1.45 kcal/mol for HAT barriers, and 0.57 kcal/mol for ∆Go solv values. We demonstrate two predictive applications. First, we show that a combined BDE and HAT-barrier model identifies experimentally observed oxidative degradation sites in drug-like molecules with a 91% top-5 hit rate and 80% site-level recall. Second, a QM-parameterized Abraham model enables rapid solvation energy estimates at near-COSMO-RS accuracy within its training domain, reproducing ∆Go solv and ∆Ho solv
- 19 September 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 128 (39) , 8384-8403
Accurately Predicting Barrier Heights for Radical Reactions in Solution Using Deep Graph Networks
Quantitative estimates of reaction barriers and solvent effects are essential for developing kinetic mechanisms and predicting reaction outcomes. Here, we create a new data set of 5,600 unique elementary radical reactions calculated using the M06-2X/def2-QZVP//B3LYP-D3(BJ)/def2-TZVP level of theory. A conformer search is done for each species using TPSS/def2-TZVP. Gibbs free energies of activation and of reaction for these radical reactions in 40 common solvents are obtained using COSMO-RS for solvation effects. These balanced reactions involve the elements H, C, N, O, and S, contain up to 19 heavy atoms, and have atom-mapped SMILES. All transition states are verified by an intrinsic reaction coordinate calculation. We next train a deep graph network to directly estimate the Gibbs free energy of activation and of reaction in both gas and solution phases using only the atom-mapped SMILES of the reactant and product and the SMILES of the solvent. This simple input representation avoids computationally expensive optimizations for the reactant, transition state, and product structures during inference, making our model well-suited for high-throughput predictive chemistry and quickly providing information for (retro-)synthesis planning tools. To properly measure model performance, we report results on both interpolative and extrapolative data splits and also compare to several baseline models. During training and testing, the data set is augmented by including the reverse direction of each reaction and variants with different resonance structures. After data augmentation, we have around 2 million entries to train the model, which achieves a testing set mean absolute error of 1.16 kcal mol-1 for the Gibbs free energy of activation in solution. We anticipate this model will accelerate predictions for high-throughput screening to quickly identify relevant reactions in solution, and our data set will serve as a benchmark for future studies.
- 19 September 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 128 (39) , 8384-8403
Accurately Predicting Barrier Heights for Radical Reactions in Solution Using Deep Graph Networks
Quantitative estimates of reaction barriers and solvent effects are essential for developing kinetic mechanisms and predicting reaction outcomes. Here, we create a new data set of 5,600 unique elementary radical reactions calculated using the M06-2X/def2-QZVP//B3LYP-D3(BJ)/def2-TZVP level of theory. A conformer search is done for each species using TPSS/def2-TZVP. Gibbs free energies of activation and of reaction for these radical reactions in 40 common solvents are obtained using COSMO-RS for solvation effects. These balanced reactions involve the elements H, C, N, O, and S, contain up to 19 heavy atoms, and have atom-mapped SMILES. All transition states are verified by an intrinsic reaction coordinate calculation. We next train a deep graph network to directly estimate the Gibbs free energy of activation and of reaction in both gas and solution phases using only the atom-mapped SMILES of the reactant and product and the SMILES of the solvent. This simple input representation avoids computationally expensive optimizations for the reactant, transition state, and product structures during inference, making our model well-suited for high-throughput predictive chemistry and quickly providing information for (retro-)synthesis planning tools. To properly measure model performance, we report results on both interpolative and extrapolative data splits and also compare to several baseline models. During training and testing, the data set is augmented by including the reverse direction of each reaction and variants with different resonance structures. After data augmentation, we have around 2 million entries to train the model, which achieves a testing set mean absolute error of 1.16 kcal mol-1 for the Gibbs free energy of activation in solution. We anticipate this model will accelerate predictions for high-throughput screening to quickly identify relevant reactions in solution, and our data set will serve as a benchmark for future studies.
- 16 May 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 128 (21) , 4335-4352
Toward Accurate Quantum Mechanical Thermochemistry: (1) Extensible Implementation and Comparison of Bond Additivity Corrections and Isodesmic Reactions
Obtaining accurate enthalpies of formation of chemical species, ΔHf, often requires empirical corrections that connect the results of quantum mechanical (QM) calculations with the experimental enthalpies of elements in their standard state. One approach is to use atomization energy corrections followed by bond additivity corrections (BACs), such as those defined by Petersson et al. or Anantharaman and Melius. Another approach is to utilize isodesmic reactions (IDRs) as shown by Buerger et al. We implement both approaches in Arkane, an open-source software that can calculate species thermochemistry using results from various QM software packages. In this work, we collect 421 reference species from the literature to derive ΔHf corrections and fit atomization energy corrections and BACs for 15 commonly used model chemistries. We find that both types of BACs yield similar accuracy, although Anantharaman- and Melius-type BACs appear to generalize better. Furthermore, BACs tend to achieve better accuracy than IDRs for commonly used model chemistries, and IDRs can be less robust because of the sensitivity to the chosen reference species and reactions. Overall, Anantharaman- and Melius-type BACs are our recommended approach for achieving accurate QM corrections for enthalpies.
- 16 May 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 128 (21) , 4335-4352
Toward Accurate Quantum Mechanical Thermochemistry: (1) Extensible Implementation and Comparison of Bond Additivity Corrections and Isodesmic Reactions
Obtaining accurate enthalpies of formation of chemical species, ΔHf, often requires empirical corrections that connect the results of quantum mechanical (QM) calculations with the experimental enthalpies of elements in their standard state. One approach is to use atomization energy corrections followed by bond additivity corrections (BACs), such as those defined by Petersson et al. or Anantharaman and Melius. Another approach is to utilize isodesmic reactions (IDRs) as shown by Buerger et al. We implement both approaches in Arkane, an open-source software that can calculate species thermochemistry using results from various QM software packages. In this work, we collect 421 reference species from the literature to derive ΔHf corrections and fit atomization energy corrections and BACs for 15 commonly used model chemistries. We find that both types of BACs yield similar accuracy, although Anantharaman- and Melius-type BACs appear to generalize better. Furthermore, BACs tend to achieve better accuracy than IDRs for commonly used model chemistries, and IDRs can be less robust because of the sensitivity to the chosen reference species and reactions. Overall, Anantharaman- and Melius-type BACs are our recommended approach for achieving accurate QM corrections for enthalpies.
- 27 March 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 128 (14) , 2891-2907
Subgraph Isomorphic Decision Tree to Predict Radical Thermochemistry with Bounded Uncertainty Estimation
Detailed chemical kinetic models offer valuable mechanistic insights into industrial applications. Automatic generation of reliable kinetic models requires fast and accurate radical thermochemistry estimation. Kineticists often prefer hydrogen bond increment (HBI) corrections from a closed-shell molecule to the corresponding radical for their interpretability, physical meaning, and facilitation of error cancellation as a relative quantity. Tree estimators, used due to limited data, currently rely on expert knowledge and manual construction, posing challenges in maintenance and improvement. In this work, we extend the subgraph isomorphic decision tree (SIDT) algorithm originally developed for rate estimation to estimate HBI corrections. We introduce a physics-aware splitting criterion, explore a bounded weighted uncertainty estimation method, and evaluate aleatoric uncertainty-based and model variance reduction-based prepruning methods. Moreover, we compile a data set of thermochemical parameters for 2210 radicals involving C, O, N, and H based on quantum chemical calculations from recently published works. We leverage the collected data set to train the SIDT model. Compared to existing empirical tree estimators, the SIDT model (1) offers an automatic approach to generating and extending the tree estimator for thermochemistry, (2) has better accuracy and R2, (3) provides significantly more realistic uncertainty estimates, and (4) has a tree structure much more advantageous in descent speed. Overall, the SIDT estimator marks a great leap in kinetic modeling, offering more precise, reliable, and scalable predictions for radical thermochemistry.
- 27 March 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 128 (14) , 2891-2907
Subgraph Isomorphic Decision Tree to Predict Radical Thermochemistry with Bounded Uncertainty Estimation
Detailed chemical kinetic models offer valuable mechanistic insights into industrial applications. Automatic generation of reliable kinetic models requires fast and accurate radical thermochemistry estimation. Kineticists often prefer hydrogen bond increment (HBI) corrections from a closed-shell molecule to the corresponding radical for their interpretability, physical meaning, and facilitation of error cancellation as a relative quantity. Tree estimators, used due to limited data, currently rely on expert knowledge and manual construction, posing challenges in maintenance and improvement. In this work, we extend the subgraph isomorphic decision tree (SIDT) algorithm originally developed for rate estimation to estimate HBI corrections. We introduce a physics-aware splitting criterion, explore a bounded weighted uncertainty estimation method, and evaluate aleatoric uncertainty-based and model variance reduction-based prepruning methods. Moreover, we compile a data set of thermochemical parameters for 2210 radicals involving C, O, N, and H based on quantum chemical calculations from recently published works. We leverage the collected data set to train the SIDT model. Compared to existing empirical tree estimators, the SIDT model (1) offers an automatic approach to generating and extending the tree estimator for thermochemistry, (2) has better accuracy and R2, (3) provides significantly more realistic uncertainty estimates, and (4) has a tree structure much more advantageous in descent speed. Overall, the SIDT estimator marks a great leap in kinetic modeling, offering more precise, reliable, and scalable predictions for radical thermochemistry.
- 2 January 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (2) , 1013-1028
Oxygen Chemistry in Polymer Fouling: Insights from Multiphase Detailed Kinetic Modeling
- 2 January 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (2) , 1013-1028
Oxygen Chemistry in Polymer Fouling: Insights from Multiphase Detailed Kinetic Modeling
- 1 September 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (36) , 14266-14285
Detailed Multiphase Chemical Kinetic Model for Polymer Fouling in a Distillation Column
- 1 September 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (36) , 14266-14285
Detailed Multiphase Chemical Kinetic Model for Polymer Fouling in a Distillation Column
- Open Access
- 3 April 2023
- Published by Wiley in International Journal of Chemical Kinetics
- Vol. 55 (6) , 300-323
Automated reaction kinetics and network exploration (Arkane): A statistical mechanics, thermodynamics, transition state theory, and master equation software
The open‐source statistical mechanics software described here, Arkane–Automated Reaction Kinetics and Network Exploration–facilitates computations of thermodynamic properties of chemical species, high‐pressure limit reaction rate coefficients, and pressure‐dependent rate coefficient over multi‐well molecular potential energy surfaces (PES) including the effects of collisional energy transfer on phenomenological kinetics. Arkane can use estimates to fill in information for molecules or reactions where quantum chemistry information is missing. The software solves the internal energy master equation for complex unimolecular reaction systems. Inputs to the software include converged electronic structure computations performed by the user using a variety of supported software packages (Gaussian, Molpro, Orca, TeraChem, Q‐Chem, Psi4). The software outputs high‐pressure limit rate coefficients and pressure‐dependent phenomenological rate coefficients, as well as computed thermodynamic properties (enthalpy, entropy, and constant pressure heat capacity) with added energy corrections. Some of the key features of Arkane include treatment of 1D, 2D or ND hindered internal rotation modes, treatment of free internal rotation modes, quantum tunneling effect consideration, transition state theory (TST) and Rice‐Ramsperger‐Kassel‐Marcus (RRKM) rate coefficient computations, master equation solution with four implemented methods, inverse‐Laplace transform of high‐pressure limit rate coefficients into the energy domain, energy corrections based on bond‐additivity or isodesmic reactions, automated and efficient PES exploration, and PES sensitivity analysis. The present work describes the design of Arkane, how it should be used, and refers to the theory that it employs. Arkane is distributed via the RMG‐Py software suite (https://github.com/ReactionMechanismGenerator/RMG‐Py).
- 3 April 2023
- Published by Wiley in International Journal of Chemical Kinetics
- Vol. 55 (6) , 300-323
Open AccessAutomated reaction kinetics and network exploration (Arkane): A statistical mechanics, thermodynamics, transition state theory, and master equation software
The open‐source statistical mechanics software described here, Arkane–Automated Reaction Kinetics and Network Exploration–facilitates computations of thermodynamic properties of chemical species, high‐pressure limit reaction rate coefficients, and pressure‐dependent rate coefficient over multi‐well molecular potential energy surfaces (PES) including the effects of collisional energy transfer on phenomenological kinetics. Arkane can use estimates to fill in information for molecules or reactions where quantum chemistry information is missing. The software solves the internal energy master equation for complex unimolecular reaction systems. Inputs to the software include converged electronic structure computations performed by the user using a variety of supported software packages (Gaussian, Molpro, Orca, TeraChem, Q‐Chem, Psi4). The software outputs high‐pressure limit rate coefficients and pressure‐dependent phenomenological rate coefficients, as well as computed thermodynamic properties (enthalpy, entropy, and constant pressure heat capacity) with added energy corrections. Some of the key features of Arkane include treatment of 1D, 2D or ND hindered internal rotation modes, treatment of free internal rotation modes, quantum tunneling effect consideration, transition state theory (TST) and Rice‐Ramsperger‐Kassel‐Marcus (RRKM) rate coefficient computations, master equation solution with four implemented methods, inverse‐Laplace transform of high‐pressure limit rate coefficients into the energy domain, energy corrections based on bond‐additivity or isodesmic reactions, automated and efficient PES exploration, and PES sensitivity analysis. The present work describes the design of Arkane, how it should be used, and refers to the theory that it employs. Arkane is distributed via the RMG‐Py software suite (https://github.com/ReactionMechanismGenerator/RMG‐Py).
- 31 March 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 127 (14) , 3231-3245
Butyl Acetate Pyrolysis and Combustion Chemistry: Mechanism Generation and Shock Tube Experiments
The combustion and pyrolysis behaviors of light esters and fatty acid methyl esters have been widely studied due to their relevance as biofuel and fuel additives. However, a knowledge gap exists for midsize alkyl acetates, especially ones with long alkoxyl groups. Butyl acetate, in particular, is a promising biofuel with its economic and robust production possibilities and ability to enhance blendstock performance and reduce soot formation. However, it is little studied from both experimental and modeling aspects. This work created detailed oxidation mechanisms for the four butyl acetate isomers (normal-, sec-, tert-, and iso-butyl acetate) at temperatures varying from 650 to 2000 K and pressures up to 100 atm using the Reaction Mechanism Generator. About 60% of species in each model have thermochemical parameters from published data or in-house quantum calculations, including fuel molecules and intermediate combustion products. Kinetics of essential primary reactions, retro-ene and hydrogen atom abstraction by OH or HO2, governing the fuel oxidation pathways, were also calculated quantum-mechanically. Simulation of the developed mechanisms indicates that the majority of the fuel will decompose into acetic acid and relevant butenes at elevated temperatures, making their ignition behaviors similar to butenes. The adaptability of the developed models to high-temperature pyrolysis systems was tested against newly collected high-pressure shock experiments; the simulated CO mole fraction time histories have a reasonable agreement with the laser measurement in the shock tube. This work reveals the high-temperature oxidation chemistry of butyl acetates and demonstrates the validity of predictive models for biofuel chemistry established on accurate thermochemical and kinetic parameters.
- 31 March 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 127 (14) , 3231-3245
Butyl Acetate Pyrolysis and Combustion Chemistry: Mechanism Generation and Shock Tube Experiments
The combustion and pyrolysis behaviors of light esters and fatty acid methyl esters have been widely studied due to their relevance as biofuel and fuel additives. However, a knowledge gap exists for midsize alkyl acetates, especially ones with long alkoxyl groups. Butyl acetate, in particular, is a promising biofuel with its economic and robust production possibilities and ability to enhance blendstock performance and reduce soot formation. However, it is little studied from both experimental and modeling aspects. This work created detailed oxidation mechanisms for the four butyl acetate isomers (normal-, sec-, tert-, and iso-butyl acetate) at temperatures varying from 650 to 2000 K and pressures up to 100 atm using the Reaction Mechanism Generator. About 60% of species in each model have thermochemical parameters from published data or in-house quantum calculations, including fuel molecules and intermediate combustion products. Kinetics of essential primary reactions, retro-ene and hydrogen atom abstraction by OH or HO2, governing the fuel oxidation pathways, were also calculated quantum-mechanically. Simulation of the developed mechanisms indicates that the majority of the fuel will decompose into acetic acid and relevant butenes at elevated temperatures, making their ignition behaviors similar to butenes. The adaptability of the developed models to high-temperature pyrolysis systems was tested against newly collected high-pressure shock experiments; the simulated CO mole fraction time histories have a reasonable agreement with the laser measurement in the shock tube. This work reveals the high-temperature oxidation chemistry of butyl acetates and demonstrates the validity of predictive models for biofuel chemistry established on accurate thermochemical and kinetic parameters.