A. E. Arinova
Research Subjects
A. E. Arinova has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Serik D. Fazylov
Laboratory of Synthesis of Biologically Active Substances, Institute of Organic Synthesis and Coal Chemistry, Karaganda 100008, Kazakhstan
5 shared publications - A. S. Fazylov
Undergraduate of the Karaganda State Technical University https://orcid.org
3 shared publications - Arstan M. Gazaliev
Institute of Organic Synthesis and Chemistry of Coal of Kazakhstan Republic, Alikhanov Str., 1, Karaganda 100000, Kazakhstan
3 shared publications - Oralgazy Aktaevich Nurkenov
Laboratory of Synthesis of Biologically Active Substances, Institute of Organic Synthesis and Coal Chemistry, Karaganda 100008, Kazakhstan
3 shared publications - Gulnur Kalimuldina
Department of Mechanical and Aerospace Engineering Nazarbayev University Astana Kazakhstan
2 shared publications M. K. Ibraev
2 shared publications
Latest Publications
- Open Access
- 30 March 2025
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 17 (8) , 5122-5134
Variability of polymer for determination of soil-water characteristic curves
- 30 March 2025
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 17 (8) , 5122-5134
Open AccessVariability of polymer for determination of soil-water characteristic curves
- 28 March 2025
- Published by Toraighyrov University in Bulletin of Toraighyrov University. Energetics series
- No. 1.2025,p. 314-329
Evaluating structure and power converting circuits for Hybrid triboelectric and piezoelectric nanogenerator
A hybrid nanogenerator integrates both triboelectric and piezoelectric components into a single device. By doing so, it can harness energy from different types of mechanical inputs more efficiently. When the hybrid nanogenerator is subjected to mechanical motion, both triboelectric and piezoelectric effects are activated. For example, when pressing or sliding motions occur, the triboelectric layers produce a charge due to contact and separation, while the piezoelectric material generates a charge from the mechanical stress applied. The combined effect can produce higher electrical output and improve the efficiency of energy harvesting from a broader range of mechanical motions. In this paper, the novel structure of hybrid triboelectric and piezoelectric nano-generators have been merged to harvest abundant mechanical energy. Ecoflex and PVDF-based hybrid nanogenerator have been proposed to harvest mechanical energy. While Ecoflex synthesized with 0.5 % hexachlorofullerene (C60Cl6) is used for the triboelectric layer in the TENG part, 3wt% polymethyl methacrylate (PMMA) integrated with polyvinylidene fluoride (PVDF) matrix is utilized as a dielectric medium in piezoelectric part of the nanogenerator. Efficient hybrid nanogenerator structures were selected and appropriate power converters were used. The hybrid NG’s performance in generating electrical microenergy was demonstrated experimentally. Keywords: hybrid nanogenerator, triboelectric nanogenerator, piezoelectric nanogenerator, mechanical energy harvesting, dielectric medium, power converter circuit.
- 28 March 2025
- Published by Toraighyrov University in Bulletin of Toraighyrov University. Energetics series
- No. 1.2025,p. 314-329
Evaluating structure and power converting circuits for Hybrid triboelectric and piezoelectric nanogenerator
A hybrid nanogenerator integrates both triboelectric and piezoelectric components into a single device. By doing so, it can harness energy from different types of mechanical inputs more efficiently. When the hybrid nanogenerator is subjected to mechanical motion, both triboelectric and piezoelectric effects are activated. For example, when pressing or sliding motions occur, the triboelectric layers produce a charge due to contact and separation, while the piezoelectric material generates a charge from the mechanical stress applied. The combined effect can produce higher electrical output and improve the efficiency of energy harvesting from a broader range of mechanical motions. In this paper, the novel structure of hybrid triboelectric and piezoelectric nano-generators have been merged to harvest abundant mechanical energy. Ecoflex and PVDF-based hybrid nanogenerator have been proposed to harvest mechanical energy. While Ecoflex synthesized with 0.5 % hexachlorofullerene (C60Cl6) is used for the triboelectric layer in the TENG part, 3wt% polymethyl methacrylate (PMMA) integrated with polyvinylidene fluoride (PVDF) matrix is utilized as a dielectric medium in piezoelectric part of the nanogenerator. Efficient hybrid nanogenerator structures were selected and appropriate power converters were used. The hybrid NG’s performance in generating electrical microenergy was demonstrated experimentally. Keywords: hybrid nanogenerator, triboelectric nanogenerator, piezoelectric nanogenerator, mechanical energy harvesting, dielectric medium, power converter circuit.
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (23) , 3280
Electrophoretic Deposition of Polyethylene Oxide-Based Gel-Polymer Electrolyte for 3D Lithium-Ion Batteries
Despite the advances made in lithium-ion batteries (LIBs) over the last few decades, improved energy and power density is still required for portable devices, transit, and stationary applications [1-3]. Along with developing new materials, optimizing the shape of the battery electrodes is critical for improving the battery performance since the structure of these electrodes has a large impact on ion movement and reaction kinetics. The appeal of 3D structured batteries comes from certain operating features that are not available with conventional 2D geometries. One important feature is the ability to increase areal capacity (mAh cm−2) within a given footprint area of the electrode .Up to today, various methods were employed to coat the foam-type 3D electrodes with polymer or solid-state electrolytes: spin coating, layer-by-layer, and drop coating. Nonetheless, only a number of full-cell operation cases were disclosed, which led to the conclusion that, despite many attempts, drawbacks still exist in solving the homogeneous coating problem of polymer electrolytes. In this work, we report on the simple and facile coating process of polymer electrolyte on the intricate 3D structured NiO@Ni foam anode with the electrophoretic technique. To the best of our knowledge, it was not yet reported in the literature. The conformally coated polymer layer is proven to be very thin and homogeneous without any defects. The NiO@Ni foam/PEO configuration without the use of a commercial separator displayed stable cyclability up to 100 cycles with capacity retention of 88% and coulombic efficiency of 99%. The results are very promising for solving the problem of integrating polymer electrolytes onto any 3D structured anodes. In summary, a facile and simple electrophoretic technique was employed to conformally coat PEO gel-polymer electrolyte onto foam-type NiO/Ni anode for LIBs for the first time. Two electrodes of NiO/Ni foam as a working electrode and Pt metal as a counter electrode were used for the EPD process. Where the PEO solution acted as an electrolyte and, in the end, formed on the NiO/Ni foam surface. Through investigating various layers of PEO, it was concluded that the method allowed obtaining homogeneous thin films of around 2.66 μm for optimal 10 layers, which were free of cracks and defects. The electrochemical performance of the gel-polymer electrolyte PEO with commercially available liquid electrolyte 1M LiPF6 electrolyte solution in EC/EMC/DC was comparable to the traditional separator when used without it in a half-cell with lithium. The cycling stability results displayed an outstanding performance for the PEO electrolyte, delivering a capacity of 406 mAh g-1 at a 0.1 C rate after the 100th cycle. The stability of the formed PEO on the surface of the anode was demonstrated by FTIR analysis after 100 cycles. The stated simple approach allowed a cell operation at room temperature without a commercial separator, which is an excellent result for further developing high-energy-density full 3D batteries.
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (23) , 3280
Electrophoretic Deposition of Polyethylene Oxide-Based Gel-Polymer Electrolyte for 3D Lithium-Ion Batteries
Despite the advances made in lithium-ion batteries (LIBs) over the last few decades, improved energy and power density is still required for portable devices, transit, and stationary applications [1-3]. Along with developing new materials, optimizing the shape of the battery electrodes is critical for improving the battery performance since the structure of these electrodes has a large impact on ion movement and reaction kinetics. The appeal of 3D structured batteries comes from certain operating features that are not available with conventional 2D geometries. One important feature is the ability to increase areal capacity (mAh cm−2) within a given footprint area of the electrode .Up to today, various methods were employed to coat the foam-type 3D electrodes with polymer or solid-state electrolytes: spin coating, layer-by-layer, and drop coating. Nonetheless, only a number of full-cell operation cases were disclosed, which led to the conclusion that, despite many attempts, drawbacks still exist in solving the homogeneous coating problem of polymer electrolytes. In this work, we report on the simple and facile coating process of polymer electrolyte on the intricate 3D structured NiO@Ni foam anode with the electrophoretic technique. To the best of our knowledge, it was not yet reported in the literature. The conformally coated polymer layer is proven to be very thin and homogeneous without any defects. The NiO@Ni foam/PEO configuration without the use of a commercial separator displayed stable cyclability up to 100 cycles with capacity retention of 88% and coulombic efficiency of 99%. The results are very promising for solving the problem of integrating polymer electrolytes onto any 3D structured anodes. In summary, a facile and simple electrophoretic technique was employed to conformally coat PEO gel-polymer electrolyte onto foam-type NiO/Ni anode for LIBs for the first time. Two electrodes of NiO/Ni foam as a working electrode and Pt metal as a counter electrode were used for the EPD process. Where the PEO solution acted as an electrolyte and, in the end, formed on the NiO/Ni foam surface. Through investigating various layers of PEO, it was concluded that the method allowed obtaining homogeneous thin films of around 2.66 μm for optimal 10 layers, which were free of cracks and defects. The electrochemical performance of the gel-polymer electrolyte PEO with commercially available liquid electrolyte 1M LiPF6 electrolyte solution in EC/EMC/DC was comparable to the traditional separator when used without it in a half-cell with lithium. The cycling stability results displayed an outstanding performance for the PEO electrolyte, delivering a capacity of 406 mAh g-1 at a 0.1 C rate after the 100th cycle. The stability of the formed PEO on the surface of the anode was demonstrated by FTIR analysis after 100 cycles. The stated simple approach allowed a cell operation at room temperature without a commercial separator, which is an excellent result for further developing high-energy-density full 3D batteries.
- Open Access
- 27 October 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (21) , 10056
Studying the Effect of Chondroitin Sulfate on the Physicochemical Properties of Novel Gelatin/Chitosan Biopolymer-Based Cryogels
The application of biopolymers in tissue engineering is of a great interest due to of their inherent properties such as cell adhesion, biodegradation, bioavailability, and viscoelasticity. In this study, we synthesized cryogels based on biopolymers of gelatin, chitosan, and chondroitin sulfate by cryopolymerization and studied the effect of chondroitin sulfate on changing the physicochemical properties of cryogels such as pore size, pore volume, density, gel fraction, and biodegradation. A macroporous surface of the synthesized polymers has been investigated by SEM. The glass transition temperatures of the crosslinked cryogels, determined by the DSC method, were higher compared to that of the non-crosslinked cryogel used as a reference. The results of the MTT test showed that aqueous extracts of the prepared cryogels had no toxic effect on rat adipose-derived mesenchymal stem cells. The research in this area is of great importance and provides new insights into novel, effective methods for obtaining biopolymers that can be used as carriers of cells.
- 27 October 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (21) , 10056
Open AccessStudying the Effect of Chondroitin Sulfate on the Physicochemical Properties of Novel Gelatin/Chitosan Biopolymer-Based Cryogels
The application of biopolymers in tissue engineering is of a great interest due to of their inherent properties such as cell adhesion, biodegradation, bioavailability, and viscoelasticity. In this study, we synthesized cryogels based on biopolymers of gelatin, chitosan, and chondroitin sulfate by cryopolymerization and studied the effect of chondroitin sulfate on changing the physicochemical properties of cryogels such as pore size, pore volume, density, gel fraction, and biodegradation. A macroporous surface of the synthesized polymers has been investigated by SEM. The glass transition temperatures of the crosslinked cryogels, determined by the DSC method, were higher compared to that of the non-crosslinked cryogel used as a reference. The results of the MTT test showed that aqueous extracts of the prepared cryogels had no toxic effect on rat adipose-derived mesenchymal stem cells. The research in this area is of great importance and provides new insights into novel, effective methods for obtaining biopolymers that can be used as carriers of cells.
- 15 October 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in THE BULLETIN
- Vol. 5 (387) , 25-33
INDICATORS OF CELL METABOLISM IN VITRO IN RESEARCHES OF ANTI-INFLAMMATORY AND CYTOTOXIC EFFECTS OF FULLEROPYRROLIDINES С60 AND THEIR INITIAL SUBSTRATES
The article considers data on the in vitro study of new fulleropyrrolidine compounds for anti-inflammatory and cytotoxic activity in cultures of human monocyte cell lines MonoMac-6 and THP-1Blue and also as inhibitors of human neutrophil elastase. This enzyme is a regulator of inflammation. In different situations, it can act both as a pro-inflammatory and as an anti-inflammatory agent. An imbalance in the regulation of elastase activity plays an important role in the pathogenesis of cystic fibrosis, acute respiratory distress syndrome, bronchiectasis, chronic obstructive pulmonary disease, type 2 diabetes mellitus, atherosclerosis and hypertension. In the future, such studies should lead to the creation of optimal in vitro models that most adequately reflect the situation in vivo and establish the relationship between the structure and activity of the studied drugs. It is noted that the presence of lipophilic properties in fullerene C60 derivatives is especially important in the development of pharmaceuticals for the control of pathogens of various infectious diseases. Fullerene C60 derivatives have the ability to easily penetrate lipid membranes, overcome the blood-brain barrier, and modulate ion transport. Compounds were tested for anti-inflammatory and cytotoxic activity (in vitro) on cultures of human monocytic cell lines MonoMac-6 and THP-1Blue. Modified fullerene compounds of various structures were tested for their inhibitory ability against neutrophil elastase enzyme (in vitro). Elastase activity was evaluated by the ability of fulleropyrrolidine compounds to hydrolyze the synthetic substrate N-methylsuccinyl-Ala-Ala-Pro-Val-7-amino-4-me-thylcoumarin (Calbiochem). The results of studies of fullerene compounds in relation to their anti-inflammatory and cytotoxic activity are obtained. The analysis of the fluorescence kinetics of the compounds was carried out. The cytotoxic activity of the samples was investigated in the Brine Schrimp test using Artemia salina. All compounds have cytotoxicity, which suggests a lack of selectivity of chemotherapeutic action. In general, the presence of a cytotoxic effect confirms the reality of antimicrobial action. The results of the study of the antibacterial and antifungal activity of the synthesized new fulleropyrrolidines and their starting substrates are described (S. aureus 505, Bacillus subtilis, Str.agalactiae, E. Coli M-17, Ps.aeruginosa, Candida аlbicans, Penicillium citrinum, Aspergillus niger, Aspergillus flavus, Trichophyton mentagraphytos, Epidermophyton fioccosum). As a result of the study of the potential antifungal activity of the compounds, it was found that only two drugs inhibit the growth of test cultures in vitro. All other studied samples have practically no activity against the yeast fungi Candida albicans. In general, the presence of a cytotoxic effect in the studied fullerene compounds confirms the reality of the antimicrobial action.
- 15 October 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in THE BULLETIN
- Vol. 5 (387) , 25-33
INDICATORS OF CELL METABOLISM IN VITRO IN RESEARCHES OF ANTI-INFLAMMATORY AND CYTOTOXIC EFFECTS OF FULLEROPYRROLIDINES С60 AND THEIR INITIAL SUBSTRATES
The article considers data on the in vitro study of new fulleropyrrolidine compounds for anti-inflammatory and cytotoxic activity in cultures of human monocyte cell lines MonoMac-6 and THP-1Blue and also as inhibitors of human neutrophil elastase. This enzyme is a regulator of inflammation. In different situations, it can act both as a pro-inflammatory and as an anti-inflammatory agent. An imbalance in the regulation of elastase activity plays an important role in the pathogenesis of cystic fibrosis, acute respiratory distress syndrome, bronchiectasis, chronic obstructive pulmonary disease, type 2 diabetes mellitus, atherosclerosis and hypertension. In the future, such studies should lead to the creation of optimal in vitro models that most adequately reflect the situation in vivo and establish the relationship between the structure and activity of the studied drugs. It is noted that the presence of lipophilic properties in fullerene C60 derivatives is especially important in the development of pharmaceuticals for the control of pathogens of various infectious diseases. Fullerene C60 derivatives have the ability to easily penetrate lipid membranes, overcome the blood-brain barrier, and modulate ion transport. Compounds were tested for anti-inflammatory and cytotoxic activity (in vitro) on cultures of human monocytic cell lines MonoMac-6 and THP-1Blue. Modified fullerene compounds of various structures were tested for their inhibitory ability against neutrophil elastase enzyme (in vitro). Elastase activity was evaluated by the ability of fulleropyrrolidine compounds to hydrolyze the synthetic substrate N-methylsuccinyl-Ala-Ala-Pro-Val-7-amino-4-me-thylcoumarin (Calbiochem). The results of studies of fullerene compounds in relation to their anti-inflammatory and cytotoxic activity are obtained. The analysis of the fluorescence kinetics of the compounds was carried out. The cytotoxic activity of the samples was investigated in the Brine Schrimp test using Artemia salina. All compounds have cytotoxicity, which suggests a lack of selectivity of chemotherapeutic action. In general, the presence of a cytotoxic effect confirms the reality of antimicrobial action. The results of the study of the antibacterial and antifungal activity of the synthesized new fulleropyrrolidines and their starting substrates are described (S. aureus 505, Bacillus subtilis, Str.agalactiae, E. Coli M-17, Ps.aeruginosa, Candida аlbicans, Penicillium citrinum, Aspergillus niger, Aspergillus flavus, Trichophyton mentagraphytos, Epidermophyton fioccosum). As a result of the study of the potential antifungal activity of the compounds, it was found that only two drugs inhibit the growth of test cultures in vitro. All other studied samples have practically no activity against the yeast fungi Candida albicans. In general, the presence of a cytotoxic effect in the studied fullerene compounds confirms the reality of the antimicrobial action.
- Open Access
- 30 June 2020
- Published by Karagandy University of the name of academician E.A. Buketov in Bulletin of the Karaganda University. "Chemistry" Series
- Vol. 98 (2) , 15-21
N-methyl-2-(4-styrylphenyl)-3,4-fulleropyrrolidine synthesis and structure
- 30 June 2020
- Published by Karagandy University of the name of academician E.A. Buketov in Bulletin of the Karaganda University. "Chemistry" Series
- Vol. 98 (2) , 15-21
Open AccessN-methyl-2-(4-styrylphenyl)-3,4-fulleropyrrolidine synthesis and structure
- 15 April 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 2 (440) , 62-68
SYNTHESIS OF PROPERTIES N-METHYL-2-(PYRID-4-YL)-3,4-FULLEROPYRROLIDINE
- 15 April 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 2 (440) , 62-68
SYNTHESIS OF PROPERTIES N-METHYL-2-(PYRID-4-YL)-3,4-FULLEROPYRROLIDINE
- 1 January 2020
- Published by Karagandy University of the name of academician E.A. Buketov in Bulletin of the Karaganda University. "Chemistry" Series
- Vol. 99 (99) , 11-20
Biologically active derivatives of fullerene C60. Current state and development prospects
The article presents literature review on the physicochemical and biological properties of fullerene C60, as well as the authors' own experimental data on the synthesis of fullerene derivatives of amines and natural alkaloids. It is shown that the presence of a fullerene fragment in the structure of the compound provides a significant improvement or the appearance of qualitatively new mechanical, chemical, physical, biological and other properties associated with the manifestation of nanoscale factors. The issues of the relationship of the structure, water solubility and biological activity of fullerene C60 derivatives are considered. Many biologically active effects of various modified derivatives of fullerene C60 are described, which have membrane-active, antibacterial, antiviral, immunomodulating, HIV inhibitory enzymes and other properties. It was noted that preparations containing a fullerene fragment are effective against hepatitis C virus, and are also able to efficiently trap free radicals. Derivatives of fullerenes can also be used as antioxidant, neuroprotective and other agents. Particular attention is paid to the authors' own results on the synthesis of amino derivatives of fullerenes.
- 1 January 2020
- Published by Karagandy University of the name of academician E.A. Buketov in Bulletin of the Karaganda University. "Chemistry" Series
- Vol. 99 (99) , 11-20
Biologically active derivatives of fullerene C60. Current state and development prospects
The article presents literature review on the physicochemical and biological properties of fullerene C60, as well as the authors' own experimental data on the synthesis of fullerene derivatives of amines and natural alkaloids. It is shown that the presence of a fullerene fragment in the structure of the compound provides a significant improvement or the appearance of qualitatively new mechanical, chemical, physical, biological and other properties associated with the manifestation of nanoscale factors. The issues of the relationship of the structure, water solubility and biological activity of fullerene C60 derivatives are considered. Many biologically active effects of various modified derivatives of fullerene C60 are described, which have membrane-active, antibacterial, antiviral, immunomodulating, HIV inhibitory enzymes and other properties. It was noted that preparations containing a fullerene fragment are effective against hepatitis C virus, and are also able to efficiently trap free radicals. Derivatives of fullerenes can also be used as antioxidant, neuroprotective and other agents. Particular attention is paid to the authors' own results on the synthesis of amino derivatives of fullerenes.
- 18 September 2013
- Published by Springer Nature in Chemistry of Natural Compounds
- Vol. 49 (4) , 783-784
Reaction of d-Pseudoephedrine and 4-Morpholinylbenzaldehyde
- 18 September 2013
- Published by Springer Nature in Chemistry of Natural Compounds
- Vol. 49 (4) , 783-784
Reaction of d-Pseudoephedrine and 4-Morpholinylbenzaldehyde