Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Maciej Raczyński has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Improving the operational credibility of long-term energy transition planning through hourly validation of dispatch and sector coupling

    by Artur Wyrwa, Maciej Raczyński, Marcin Pluta, Janusz Zyśk, Patrycja Rzeszut

    Long-term models are commonly used to identify cost-optimal transformation pathways in strategic energy planning. Their results, however, depend on the adopted temporal representation of demand, renewable generation and system flexibility. If aggregated time slices or simplified profiles are applied, some short-term operating conditions may be insufficiently reflected. These include hours of low wind and solar generation, peak residual load, storage cycling and the interaction between electricity and district heating. This paper proposes an iterative soft-linking approach that improves the operational credibility of long-term energy system planning by coupling TIMES-PL with an hourly unit commitment and economic dispatch model. The long-term model determines the development of generation, storage and district-heating technologies, while the hourly model verifies dispatch under varying renewable availability and unit-commitment constraints. Particular attention is paid to gas-fired power plants, energy storage, power-to-heat technologies (P2H) and combined heat and power (CHP) units, as these technologies define the flexibility of a system with increasing shares of variable renewables. The results show that a higher temporal resolution leads to different utilisation patterns. Gas-fired units are used less as generic generation capacity and more as residual-load balancing resources. Storage operation becomes more dependent on short-term renewable surplus and scarcity periods. In the district-heating sector, heat production is shifted from P2H toward CHP units. The study demonstrates that hourly operational validation can reveal critical operating periods and sector-coupling effects, supporting an iterative planning workflow in which long-term capacity expansion results are corrected using operational feedback. This approach improves the reliability and policy relevance of strategic energy planning by testing whether long-term pathways remain feasible under realistic hourly operating conditions.

  • Open Access

    Integrating Renewable Energy Supply Curves into Long-Term Energy System Modelling: A Case Study of Solar PV and Onshore and Offshore Wind in Poland

    by Patrycja Rzeszut, Artur Wyrwa, Maciej Raczyński, Marcin Pluta, Janusz Zyśk

    Long-term energy system models often represent renewable energy technologies using aggregated potentials and average capacity factors, which may insufficiently reflect the spatial and technological heterogeneity of weather-dependent resources. This study develops and implements resource- and performance-based renewable energy supply curves for solar photovoltaics, onshore wind and offshore wind in the TIMES-PL energy system model for Poland. These supply curves are coupled with time-dependent techno-economic assumptions in TIMES-PL, allowing the modelled attractiveness of individual renewable resource classes to change across model years. The proposed approach combines spatial resource assessment, GIS-based data processing and differentiated hourly capacity factor profiles. The supply curves were constructed using data from the JRC ENSPRESO database, the PVGIS interface and the Copernicus Climate Data Store, with QGIS applied to classify renewable resource potential according to regional conditions, wind farm location and photovoltaic panel orientation. Two model scenarios were compared: a base scenario without supply curves and a scenario with implemented supply curves. The results show that incorporating spatial and technological constraints changes the modelled optimal capacity mix, although the overall system-level differences remain moderate. Accordingly, the results should be interpreted primarily in terms of installed capacity expansion rather than as a full comparison of system costs, electricity generation, unit dispatch or balancing effects. The total installed capacity in the supply-curve scenario is 1.91–3.44 GW higher than in the base scenario, corresponding to less than 3% of total system capacity. This increase results from the model being required to use renewable resource classes with lower capacity factors once the most favourable potentials are fully utilised. This study demonstrates that renewable energy supply curves can improve the representation of spatially differentiated renewable deployment options in long-term national energy system modelling.


  • Open Access

    Regional-Scale Energy Modelling for Developing Strategies to Achieve Climate Neutrality

    by Janusz Zyśk, Artur Wyrwa, Maciej Raczyński, Marcin Pluta, Wojciech Suwała

    In this work, complex energy and greenhouse gas emissions analysis on a regional scale was presented. In the framework of analysis, the 3E (Energy–Economy–Environment) class optimisation model was developed. The objective function includes the costs of energy in the medium and long term. The model covers the following sectors: energy, industry, agriculture, households, tertiary, transport, and forestry. Data such as (i) potential of individual technologies, (ii) potential of renewable energy sources, (iii) technology and fuel costs, (iv) the legal environment, and (v) sectoral goals indicated in strategic documents at various levels (regional, national, European) were implemented into the model. The aim of the study was to indicate the optimal paths to achieve climate neutrality for a selected coal region of Europe (Małopolska Voivodeship, Poland). For this purpose, four scenarios were developed, with different goals and activities. The base year for the research is 2020, and the scenarios were developed until 2050. The research we carried out allowed us to obtain results on greenhouse gas emissions, fuel consumption, decommissioning old technologies and installing new ones, and costs system development by 2050.


  • Open Access

    Conducting a Geographical Information System-Based Multi-Criteria Analysis to Assess the Potential and Location for Offshore Wind Farms in Poland

    by Magdalena Przewoźniak, Artur Wyrwa, Janusz Zyśk, Maciej Raczyński, Marcin Pluta

    Offshore wind energy is becoming an increasingly important element in the decarbonisation of energy systems. This study aims to estimate the technical potential for offshore wind energy in the Polish exclusive economic zone (EZZ) of the Baltic Sea. Such estimates are necessary to plan the expansion of energy infrastructure. This paper proposes a multi-criteria analysis for the estimation of offshore wind potential and site selection using QGIS software (QGIS Desktop 3.28.6). The criteria include wind velocity, water depth, distance from nature conservation areas, distance from submarine cables and gas pipelines, distance from shipping routes, distance from fishing areas, distance from shipwrecks, and distance from the coastline. The best sites are identified through the Analytic Hierarchy Process (AHP). The results show that the total suitable marine area of 16,218.67 square kilometres can be divided into three parts, in which the highly suitable area for offshore wind farms accounts for 17.55%, the moderately suitable area accounts for 48.56%, and the marginally suitable area accounts for 10.26%. Two different wind turbine placement configurations are being considered, in which wind turbines with a nominal capacity of 15 MW are laid out: 2.5 km and 2 km apart from each other. The corresponding overall electrical capacities only in highly suitable areas equal ca. 9 GW and 15 GW, respectively. If this area is extended to also include the moderately suitable parts, these values increase to ca. 31 GW and 50 GW. The results indicate that the technical potential of offshore wind in the Polish EEZ is significant and should be taken into account when designing the future electricity generation mix.


  • Open Access

    Optimization of Offshore Wind Farm Locations Using Gis-Based Tools

    by Magdalena Przewnoźniak, Artur Wyrwa, Janusz Zyśk, Maciej Raczyński, Marcin Pluta

    The aim of this study was to determine the technical potential of the Polish Exclusive Economic Zone and to identify potential areas for offshore wind development. The paper proposes a GIS-based methodology in which a unique set of constraint-related criteria was employed to select the bests sites. These criteria included wind velocity, water depth, distance from nature conser-vation areas, distance from submarine cables and gas pipelines, distance from shipping routes, distance from fishing areas, distance from shipwrecks, distance from coastline. The Analytic Hi-erarchy Process was employed to indicate the best locations. Accordingly, the total suitable marine area of 16218.67 square kilometers was divided into three parts, in which the highly suitable area accounted for 17.55%, the moderately suitable area was 48.56%, and the marginally suitable area was 10.26%. Two different spatial configurations for the deployment of individual wind turbines were considered to assess the offshore wind potential. First configuration could accommodate 3664 turbines with overall electrical capacity equal to 54.96 GW, whereas the second one 2347 turbines with overall electrical capacity equal to 35.2 GW. The technical potential only in highly suitable areas was equal to 15.24 GW and 9.15 GW, respectively. The results were presented in the form of maps over the domain covering with spatial resolution of 1 km x 1 km.

  • Open Access

    Scenario Analysis of the Development of the Polish Power System towards Achieving Climate Neutrality in 2050

    by Marcin Pluta, Artur Wyrwa, Janusz Zyśk, Wojciech Suwała, Maciej Raczyński

    The Polish power system has been reducing its impact on the environment for a long time, mainly through modernization and investments in new generation capacities, including renewable energy technologies. However, its starting point is still more difficult compared to other less coal-dependent power systems in the European Union. The study was conducted in the direction of optimizing the Polish energy mix of electricity generation from the perspective of 2050. Two energy scenarios for the possible transformation of the Polish power system towards achieving at least a 95% reduction in CO2 emissions by 2050 with an increasing share of renewables were analyzed. The study was carried out with the use of the TIMES-PL model, which minimizes the total system cost over the analyzed time horizon. The model was calibrated according to data from 2018. The two scenarios show relatively similar pathways for CO2 emission reductions by 2050. In the case of no investment in nuclear power plants, power plants equipped with CO2 capture and storage systems are an alternative solution for achieving climate neutrality and increasing national energy security.


  • Open Access

    Greening of the District Heating Systems—Case Study of Local Systems

    by Artur Wyrwa, Maciej Raczyński, Maciej Kulik, Oluwalana Oluwapelumi, Laura Mateusiak, Haoran Zhang, Marek Kempka

    The integration of renewable energy resources into district heating systems is gaining momentum across Europe, as heat producers are expected to work towards the EU Directive of Efficient District Heating and Cooling to achieve carbon neutrality by 2050. This paper studies the techno-economic implications of transforming conventional district heating systems of six locations in Poland, generating 8.5 PJ of heat annually, into sustainable and efficient district heating systems. These new systems consist of flat solar collectors integrated with seasonal pit thermal energy storages and gas heating plants, acting as flexible heat sources, covering residual heat demand and/or increasing the parameters of the working medium in the network. Using the IEA-TIMES software, two scenarios were considered, namely STAT and DYN. The results show that reaching a 20% share of heat production by solar thermal would demand extra construction of seasonal heat storage facilities with a total capacity of 197 TJ, which is approximately 4.5 times bigger than the largest seasonal heat storage located in Vojens, Denmark. The projected increase in the prices of natural gas and CO2 emission allowances accelerates the transformation of systems towards greater use of solar heating plants. In the period 2025–2050 the heat generation costs increase by ca. 65%. The contribution of the CAPEX and OPEX costs components are presented.


  • Open Access

    The Health Impact and External Cost of Electricity Production

    by Janusz Zyśk, Artur Wyrwa, Marcin Pluta, Tadeusz Olkuski, Wojciech Suwała, Maciej Raczyński

    The use of fossil fuels, which still dominate global primary energy consumption, results not only in emissions of greenhouse gas but also in emissions of pollutants such as SO2, NOx, and PM. Damage caused by air pollution can be expressed in monetary terms in the form of external costs to society. The goal of this paper is to answer the following questions: How much will the energy sector’s emissions change as a result of decarbonization? What is the estimated level of external costs related to human health in future energy scenarios? How large are the estimated external costs compared to the planned investments in this sector? The study conducted for the period 2018–2050 used the impact pathway approach and covered the centralized power and heat generation sector in Poland. The reported values of the concentration–response functions that relate human exposure to air pollution with health impact were reviewed. The results show that external costs decrease from an estimated annual level in the range of EUR 782–1911 million in 2018 to EUR 36–876 million in 2050. The cumulative value of avoided external costs between 2018 and 2050 is significantly lower than the planned capital expenditures in the energy sector in Poland.


  • Open Access

    The Impact of Decarbonization Scenarios on Air Quality and Human Health in Poland—Analysis of Scenarios up to 2050

    by Janusz Zyśk, Artur Wyrwa, Wojciech Suwała, Marcin Pluta, Tadeusz Olkuski, Maciej Raczyński

    Poland faces two great challenges in the field of environment and atmosphere protection: improving air quality, especially by reducing particulate matter (PM) emissions, and reducing relatively high greenhouse gas emissions. The aim of this research was to investigate how the fuel and technological transformations in the power, road transport, and household and tertiary sectors aimed at reducing carbon dioxide (CO2) emissions in Poland would affect air quality, human health, and the associated external costs. The study was conducted for 2050 while considering 2015 as the base year. Ambient PM2.5 (particles with a diameter of less than 2.5 µm) concentration was used as a proxy air quality indicator. The analysis was based on decarbonization scenarios developed within the REFLEX Project (Analysis of the European energy system under the aspects of flexibility and technological progress). The three scenarios of the REFLEX Project focused on the reduction of CO2 emissions up to 2050 from various sectors, mainly by the means of fuel and technological switches. This also led to the changes in the emission levels of pollutants that directly affect air quality, which were calculated with the use of fuel- and technology-specific emission factors. Next, for each emission scenario, ambient concentrations of PM2.5 and others pollutants were calculated with the use of the Polyphemus—an Eulerian-type air quality modelling system. Subsequently, the health impact of population exposed to air pollution and associated external costs were calculated using the πESA (Platform for Integrated Energy System Analysis) platform. The health impacts considered were the number of years of life lost, restricted activity days, and number of chronic bronchitis cases. The results showed that the largest reductions in both greenhouse gas and PM emissions—and consequently improvements of air quality resulting in a decrease of negative impacts on human health and a decrease of external costs—can be achieved by the transformation of heat production in the household and tertiary sector. The results also showed that the decrease in PM2.5 emissions envisaged in the analyzed scenarios in 2050 will lead to a reduction in the number of lost years of life by about 35 thousand and an avoidance of external costs by EUR 2.4 billion.