Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years

Research Subjects


Douglas George Tasker has a total of 64 co-authors. Here are the top co-authors by number of shared publications:

  • Henn Oona

    Los Alamos National Laboratory, Los Alamos, NM, USA

    4 shared publications
  • Dennis H. Herrera

    Los Alamos National Laboratory, Los Alamos, New Mexico, 87545, USA

    3 shared publications
  • Christopher J. Trujillo

    Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2 shared publications
  • Clarence M. Fowler

    Los Alamos National Laboratory, Los Alamos, New Mexico, 87545, USA

    2 shared publications
  • Dalton Smith

    Detonator Technology Group, MS C925, Los Alamos National Laboratory, Los Alamos, NM, USA 87545

    2 shared publications
  • Edward L. Ruden

    Directed Energy Directorate, Air Force Research Laboratory, Kirtland AFB, NM 87117 USA

    2 shared publications

Latest Publications

  • Open Access

    An updated technique to obtain explosive kinetics data on microsecond timescales

    by Douglas G. Tasker, Daniel A. Skrabacz, Maria C. Campbell, Kyle D. Spielvogel, Allen G. Morinec, Aidan B. McLaughlin, Robert Houlton, Robert Tucker, Jeremiah D. Moore, M. J. Cawkwell, et al.

    There are few techniques available for chemists to obtain time-to-explosion data with known temperature inputs at the early stages of the design and synthesis of new explosives. In the 1960s, a technique was developed to rapidly heat milligram-quantities of confined explosives to ∼1000 K on microsecond timescales. Wenograd [Trans. Faraday Soc. 57, 1612 (1961)] loaded explosives inside stainless steel hypodermic needles, connected them to a fireset and rapidly discharged a capacitor through the steel. He obtained the temperature by measuring the needle resistance in a Wheatstone bridge arrangement and the time to explosion from a needle rupture. However, owing to the narrow-gauge needles used in the original research, the experiment was only possible with melt-castable explosives; it was never replicated, and modern diagnostics are now available with advances beyond the 1960s. Here, we report the development of the High Explosives Initiation Time (HEIT) test, which utilizes a 250 J pulsed power system to heat the needles. This work extends the Wenograd approach by using optical diagnostics, computational modeling, and advanced techniques to measure needle resistance and needle rupture. Preliminary rate information for pentaerythritol tetranitrate (PETN) will be presented.


  • Improving manganin gauge measurements near radiographic fiducials

    by John M. Lang, Douglas G. Tasker

    In dynamic experiments diagnosed with radiography and stress gauges, the gauges are often placed adjacent to radio-graphic fiducials, such as Ta foil, which perturbs the stress measurement. We conducted experiments to test the performance of different arrangements of manganin stress gauges and Ta foils. Three different gauge/foil configurations were tested, as well as a solitary gauge as control. Gauge/foil layers were placed between high-density polyethylene (HDPE) discs and impacted by a projectile in a gas gun, a simplification of a dynamic, high explosive experiment configuration. The stress measurements were minimally perturbed when a section of foil was removed near the active element of the gauge, as expected. A follow-up experiment showed that the modification to the foil has minimal impact on the radiographic measurement of the dynamic flow.

  • Manganin gauges: Methods, calibrations and use in explosive experiments [Slides]

    by Douglas George Tasker, John Michael Jr. Lang

    The U.S. Department of Energy's Office of Scientific and Technical Information

  • LANL studies of ESD spark energy discharge through September 2019

    by Douglas Tasker, Laura Bolton Cartelli, Christopher J. Trujillo, Zachary Kenneth Hardy, Matthew David Webb, Colin Reide Brennan, Jonathan Lee Mace

    The U.S. Department of Energy's Office of Scientific and Technical Information


  • Open Access

    Voitenko experiments with novel diagnostics detect velocities of 89 km/s

    by Douglas G. Tasker, Young K. Bae, Carl Johnson, Kevin Rainey, Christopher Campbell, Dave Oschwald, Cornelius Reed

    Using a Voitenko accelerator [1-3], a series of experiments were performed with the goal of attaining shock velocities in gases approaching 90 km/s. Typically, the basic apparatus comprises a hemispherical bowl filled with a gas at atmospheric pressure; a metal piston across its diameter; and a small bore evacuated shock tube at its apex, Fig. 1. The evacuated shock tube is separated from the gas bowl by a thin diaphragm. A combination of a plane wave explosive lens and a high explosive pad accelerates the piston to a velocity of the order of 4 km/s and subsequently compresses the gas in the bowl. The thin diaphragm at the other end of the bowl then ruptures and the high pressure (shock compressed) gas escapes into the shock tube.

  • Novel uses of detonator diagnostics

    by John Gibson, Christopher J. Trujillo, Teagan Nakamoto, Dalton Smith, Zak Wilde, Douglas Tasker, Elizabeth Francois

    A novel combination of diagnostics is being used to research the physics of detonator initiation. The explosive PETN (Pentaerythritol tetranitrate) commonly used in detonators, is also a piezo-electric material that, when sufficiently shocked, emits an electromagnetic field in the radio frequency (RF) range, along crystal fracture planes. In an effort to capture this RF signal, a new diagnostic was created. A copper foil, used as an RF antenna, was wrapped around a foam fixture encompassing a PETN pellet. Rogowski coils were used to obtain the change in current with respect to time (di/dt) the detonator circuit, in and polyvinylidene difluoride (PVDF) stress sensors were used to capture shockwave arrival time. The goal of these experiments is to use these diagnostics to study the reaction response of a PETN pellet of known particle size to shock loading with various diagnostics including an antenna to capture RF emissions. Our hypothesis is that RF feedback may signify the rate of deflagration to detonation transition (DDT) or lack thereof. The new diagnostics and methods will be used to determine the timing of start of current, bridge burst, detonator breakout timing and RF generated from detonation. These data will be compared to those of currently used diagnostics in order to validate the accuracy of these new methods. Future experiments will incorporate other methods of validation including dynamic radiography, optical initiation and use of magnetic field sensors.

  • Rogowski coils for studies of detonator initiation and other diagnostics

    by Douglas Tasker, Patrick Bowden, Elizabeth Francois, John Gibson, Teagan Nakamoto, Dalton Smith, Christopher Trujillo, Zakary Wilde

    Detonators are fundamental to most explosive systems, yet the detonators themselves are rarely diagnosed to determine how well they function or why they fail. To remedy this, various electrical diagnostics were explored, including: Rogowski coils for high fidelity detection of changes in electrical current in explosive bridgewires and how they relate to detonator performance; and radio frequency (RF) antennas to detect any electromagnetic emissions associated with reaction and growth in the explosives. A new type of Rogowski coil is described and some interesting phenomena were detected with the radio frequency antenna.


  • Initiation of insensitive high explosives using multiple wave interactions

    by Elizabeth Francois, Doug Tasker, Rosemary Burritt, Patrick Bowden

    Insensitive High Explosives (IHEs) increase safety in many types of uses. However, the safety comes at the cost of performance. Initiation of IHE requires large boosters and powerful detonators as well. Multipoint initiation is being utilized to exploit explosive wave interactions to create overdriven states, greatly facilitating the initiation of IHEs. This concept builds from recent explosive experiments where the minimum spot size for single-point initiation in PBX 9502 was determined. Below this threshold, PBX 9502 could not be initiated. This was then expanded to three initiation points, which were smaller than this threshold. Measurements of the velocity and pressure of the wave interactions were collected using Photon Doppler Velocimetry (PDV). Not only was initiation observed, but the resulting pressures at the double and triple points were found to be above the CJ state for PBX 9502. Based on these results, further tests were conducted to isolate and measure the longevity and pressure of this phenomenon using a series of cutback tests.


  • The interaction of explosively generated plasma with explosives

    by Douglas G. Tasker, Von H. Whitley, Carl E. Johnson

    It has been shown that the temperature of explosively generated plasma (EGP) is of the order of 1 eV and plasma ejecta can be focused to achieve velocities as high as 25 km/s. Proof-of-principle tests were performed to determine if EGP could be used for explosive ordnance demolition and other applications. The goals were: to benignly disable ordnance containing relatively sensitive high performance explosives (PBX-9501); and to investigate the possibility of interrupting an ongoing detonation in a powerful high explosive (again PBX-9501) with EGP. Experiments were performed to establish the optimum sizes of plasma generators for the benign deactivation of high explosives, i.e., the destruction of the ordnance without initiating a detonation or comparable violent event. These experiments were followed by attempts to interrupt an ongoing detonation by the benign disruption of the unreacted explosive in its path. The results were encouraging. First, it was demonstrated that high explosives could be destroyed without the initiation of a detonation or high order reaction. Second, ongoing detonations were successfully interrupted with EGP. [LA-UR-15-25350]


  • Open Access

    Isentropic compression studies at the Los Alamos National High Magnetic Field Laboratory

    by D.G. Tasker, C.H. Mielke, G. Rodriguez, D.W. Rickel

    A single-turn magnet pulsed power system at the National High Magnetic Field Laboratory (NHMFL) at Los Alamos was originally designed to study actinide samples in extremes of high magnetic field (to 300 Tesla) [1, 2]. A simple modification to the single-turn magnet has converted it to a fast turnaround dynamic high pressure measurement system for Isentropic Compression Experiments (ICE). This paper details the work done including design, theory, modeling and results. The NHMFL system has the advantage of a relatively long-duration current with a ~2.3-μs rise time, which allows for large sample dimensions, i.e., up to 5 mm thickness, see II.D. The maximum stress is ~50GPa (0.5 Mbar) at the maximum bank voltage (60 kV); higher stresses may be obtained with modifications to the load design. For the design and predictions of performance of the NHMFL-ICE experiment it is important to have good numerical models. A novel SPICE code simulation was chosen to model all aspects of the experiment, electrical and physical. To this end, accurate dynamic load models were developed to simulate the compression and expansion of the dynamic load at high pressures using shock physics principles. In this study feasibility of adapting the existing NHMFL capacitor bank for ICE experiments up to 100 GPa is demonstrated. The adaptation saved the expense of building a dedicated capacitor bank yet this new system produces high quality ICE data with a rapid turnaround and very low cost per experiment. A series of proof-of-principle experiments [3] demonstrated the feasibility of the NHMFL-ICE technique; some of the results will be shown here to illustrate the effectiveness of the new technique.