Mengfang Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mengfang Li has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Michael T. Otley
8 shared publicationsXiaozheng Zhang
7 shared publications- Gregory Allen Sotzing
Department of Chemistry, University of Connecticut, Storrs, Connecticut 06269, United States
6 shared publications Yumin Zhu
5 shared publicationsAmrita Kumar
3 shared publicationsFahad Alhashmi Alamer
Department of Physics University of Connecticut 97 N. Eagleville Road Storrs CT 06269 USA
3 shared publications
Latest Publications
- 5 December 2016
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 302 (3)
Phase Segregation of PEDOT:PSS on Textile to Produce Materials of >10 A mm−2 Current Carrying Capacity
Conductive textiles with exceptional electrical properties have been prepared by coating the conjugated polymer, poly(3,4‐ethylenedioxyphiophene)‐polystyrenesulfonate(PEDOT‐PSS), on polyethylene terephthalate (PET) nonwoven fabrics. Phase segregation from covalent bond formation to surface silica particles generates PEDOT‐PSS coated textiles that hold potential for wearable electronics due to the breathability of the fabric, low toxicity, easy processing and lightweight with high current carrying capacity. The conductive textiles were demonstrated for applications such as electrical connections and resistive heating. image
- 5 December 2016
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 302 (3)
Phase Segregation of PEDOT:PSS on Textile to Produce Materials of >10 A mm−2 Current Carrying Capacity
Conductive textiles with exceptional electrical properties have been prepared by coating the conjugated polymer, poly(3,4‐ethylenedioxyphiophene)‐polystyrenesulfonate(PEDOT‐PSS), on polyethylene terephthalate (PET) nonwoven fabrics. Phase segregation from covalent bond formation to surface silica particles generates PEDOT‐PSS coated textiles that hold potential for wearable electronics due to the breathability of the fabric, low toxicity, easy processing and lightweight with high current carrying capacity. The conductive textiles were demonstrated for applications such as electrical connections and resistive heating. image
- 3 October 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (40) , 26998-27005
PEDOT:PSS “Wires” Printed on Textile for Wearable Electronics
Herein, the fabrication of all-organic conductive wires is demonstrated by utilizing patterning techniques such as inkjet printing and sponge stencil to apply poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS) onto nonwoven polyethylene terephthalate (PET) fabric. The coating of the conducting polymer is only present on the surface of the substrate (penetration depth ∼ 200 μm) to retain the functionality and wearability of the textile. The wires fabricated by different patterning techniques provide a wide range of resistance, i.e., tens of kΩ/□ to less than 2 Ω/□ that allows the resistance to be tailored to a specific application. The sheet resistance is measured to be as low as 1.6 Ω/□, and the breakdown current is as high as 0.37 A for a 1 mm wide line. The specific breakdown current exceeds the previously reported values of macroscopic carbon nanotube based materials. Simple circuits composed of the printed wires are demonstrated, and resistance of the circuit from the measurement agrees with the calculated value based on Kirchhoff’s rules. Additionally, the printed PEDOT:PSS wires show less than 6.2% change in sheet resistance after three washing and drying cycles using detergent.
- 3 October 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (40) , 26998-27005
PEDOT:PSS “Wires” Printed on Textile for Wearable Electronics
Herein, the fabrication of all-organic conductive wires is demonstrated by utilizing patterning techniques such as inkjet printing and sponge stencil to apply poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS) onto nonwoven polyethylene terephthalate (PET) fabric. The coating of the conducting polymer is only present on the surface of the substrate (penetration depth ∼ 200 μm) to retain the functionality and wearability of the textile. The wires fabricated by different patterning techniques provide a wide range of resistance, i.e., tens of kΩ/□ to less than 2 Ω/□ that allows the resistance to be tailored to a specific application. The sheet resistance is measured to be as low as 1.6 Ω/□, and the breakdown current is as high as 0.37 A for a 1 mm wide line. The specific breakdown current exceeds the previously reported values of macroscopic carbon nanotube based materials. Simple circuits composed of the printed wires are demonstrated, and resistance of the circuit from the measurement agrees with the calculated value based on Kirchhoff’s rules. Additionally, the printed PEDOT:PSS wires show less than 6.2% change in sheet resistance after three washing and drying cycles using detergent.
- 27 October 2014
- Published by Wiley in Advanced Materials
- Vol. 26 (47) , 8004-8009
Color‐Tuning Neutrality for Flexible Electrochromics Via a Single‐Layer Dual Conjugated Polymer Approach
A method to color-tune electrochromic devices through the use of theoretical calculations is demonstrated to achieve neutrality using only three monomers that form two distinct copolymers. These devices exhibit photopic contrasts up to ca. 38%, high neutrality, color uniformity, and switch speeds of less than 1 s. In addition, this method is used to fabricate a large-area flexible electrochromic device of 75 cm2, exceeding the size of small displays.
- 27 October 2014
- Published by Wiley in Advanced Materials
- Vol. 26 (47) , 8004-8009
Color‐Tuning Neutrality for Flexible Electrochromics Via a Single‐Layer Dual Conjugated Polymer Approach
A method to color-tune electrochromic devices through the use of theoretical calculations is demonstrated to achieve neutrality using only three monomers that form two distinct copolymers. These devices exhibit photopic contrasts up to ca. 38%, high neutrality, color uniformity, and switch speeds of less than 1 s. In addition, this method is used to fabricate a large-area flexible electrochromic device of 75 cm2, exceeding the size of small displays.
- 15 October 2014
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 2 (46) , 9874-9881
Polyelectrolytes exceeding ITO flexibility in electrochromic devices
Utilizing the in situ method, we report the fabrication of flexible electrochromic (EC) devices in a one-step lamination procedure. In this study, electrochromic device performance was enhanced via the use of new gel polymer electrolyte (GPE) materials based on poly(ethylene glycol) (PEG) derivatives. PEG serves as the polymer matrix in electrochromic devices (ECDs) that provides not only mechanical stability, but also a wide potential window and compatibility with a variety of salts. Poly(ethylene glycol) dimethacrylate (PEGDMA) in conjunction with poly(ethylene glycol) methyl ether acrylate (PEGMA), containing lithium trifluoromethanesulfonate (LiTRIF) as the salt and propylene carbonate (PC) as a plasticizer; we investigated various electrolyte parameters, including salt loading, the mono/di-functional PEG ratio, and the plasticizer to PEG ratio. Optimized gel systems exceed the mechanical flexibility of indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrates in their sustainable minimum bending radius of curvature, exhibit an ionic conductivity up to 1.36 × 10−3 S cm−1, and yield electrochromic devices (ECDs) with photopic contrasts as high as 53% (without background correction) using poly(2,2-dimethyl-3,4-propylenedioxythiophene) (PProDOT-Me2) as the standard electrochromic material. In addition to ionic conductivity, the crosslink density of the GPEs was found to have an important effect on the photopic contrast of the resultant ECDs. Using these results, 110 cm2 flexible patterned EC displays were assembled as a demonstration of their potential in real world applications.
- 15 October 2014
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 2 (46) , 9874-9881
Polyelectrolytes exceeding ITO flexibility in electrochromic devices
Utilizing the in situ method, we report the fabrication of flexible electrochromic (EC) devices in a one-step lamination procedure. In this study, electrochromic device performance was enhanced via the use of new gel polymer electrolyte (GPE) materials based on poly(ethylene glycol) (PEG) derivatives. PEG serves as the polymer matrix in electrochromic devices (ECDs) that provides not only mechanical stability, but also a wide potential window and compatibility with a variety of salts. Poly(ethylene glycol) dimethacrylate (PEGDMA) in conjunction with poly(ethylene glycol) methyl ether acrylate (PEGMA), containing lithium trifluoromethanesulfonate (LiTRIF) as the salt and propylene carbonate (PC) as a plasticizer; we investigated various electrolyte parameters, including salt loading, the mono/di-functional PEG ratio, and the plasticizer to PEG ratio. Optimized gel systems exceed the mechanical flexibility of indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrates in their sustainable minimum bending radius of curvature, exhibit an ionic conductivity up to 1.36 × 10−3 S cm−1, and yield electrochromic devices (ECDs) with photopic contrasts as high as 53% (without background correction) using poly(2,2-dimethyl-3,4-propylenedioxythiophene) (PProDOT-Me2) as the standard electrochromic material. In addition to ionic conductivity, the crosslink density of the GPEs was found to have an important effect on the photopic contrast of the resultant ECDs. Using these results, 110 cm2 flexible patterned EC displays were assembled as a demonstration of their potential in real world applications.
- 1 July 2014
- Published by Elsevier in Organic Electronics
- Vol. 15 (7) , 1378-1386
Electrochromic properties as a function of electrolyte on the performance of electrochromic devices consisting of a single-layer polymer
- 1 July 2014
- Published by Elsevier in Organic Electronics
- Vol. 15 (7) , 1378-1386
Electrochromic properties as a function of electrolyte on the performance of electrochromic devices consisting of a single-layer polymer
- 19 May 2014
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 50 (60) , 8167-8170
Neutral color tuning of polymer electrochromic devices using an organic dye
Herein, we present a facile, one-step method to color tune electrochromic devices (ECDs) that switch between two neutral colors via in situ electrochemical polymerization of electroactive monomers in the presence of a small molecule organic yellow dye using all commercially available materials. These devices exhibited photopic contrasts of ca. 30% without background correction when assembled on flexible PET-ITO substrates. In addition, devices exhibited switching speeds as low as 1 second, color uniformity, and stability. Large defect free ECDs of 100 cm2 were fabricated exceeding the active switch area required for goggles, lenses, and small display applications.
- 19 May 2014
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 50 (60) , 8167-8170
Neutral color tuning of polymer electrochromic devices using an organic dye
Herein, we present a facile, one-step method to color tune electrochromic devices (ECDs) that switch between two neutral colors via in situ electrochemical polymerization of electroactive monomers in the presence of a small molecule organic yellow dye using all commercially available materials. These devices exhibited photopic contrasts of ca. 30% without background correction when assembled on flexible PET-ITO substrates. In addition, devices exhibited switching speeds as low as 1 second, color uniformity, and stability. Large defect free ECDs of 100 cm2 were fabricated exceeding the active switch area required for goggles, lenses, and small display applications.
- 17 January 2014
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 6 (3) , 1734-1739
Acrylated Poly(3,4-propylenedioxythiophene) for Enhancement of Lifetime and Optical Properties for Single-Layer Electrochromic Devices
We utilized our in situ method for the one-step assembly of single-layer electrochromic devices (ECDs) with a 3,4-propylenedioxythiophene (ProDOT) acrylate derivative, and long-term stability was achieved. By coupling the electroactive monomer to the cross-linkable polymer matrix, preparation of the electrochromic ProDOT polymer can occur followed by UV cross-linking. Thus, we achieve immobilization of the unreacted monomer, which prevents any degradative processes from occurring at the counter electrode. This approach eliminated spot formation in the device and increased stability to over 10 000 cycles when compared to 500 cycles with conventional ProDOT devices wherein the monomer is not immobilized. The acrylated electrochromic polymer exhibits similar electrochromic properties as conventional ProDOT devices, such as photopic contrast (48% compared to 46%) and switch speed (both 2 s). This method can be applied to any one-layer electrochromic system where improved stability is desired.
- 17 January 2014
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 6 (3) , 1734-1739
Acrylated Poly(3,4-propylenedioxythiophene) for Enhancement of Lifetime and Optical Properties for Single-Layer Electrochromic Devices
We utilized our in situ method for the one-step assembly of single-layer electrochromic devices (ECDs) with a 3,4-propylenedioxythiophene (ProDOT) acrylate derivative, and long-term stability was achieved. By coupling the electroactive monomer to the cross-linkable polymer matrix, preparation of the electrochromic ProDOT polymer can occur followed by UV cross-linking. Thus, we achieve immobilization of the unreacted monomer, which prevents any degradative processes from occurring at the counter electrode. This approach eliminated spot formation in the device and increased stability to over 10 000 cycles when compared to 500 cycles with conventional ProDOT devices wherein the monomer is not immobilized. The acrylated electrochromic polymer exhibits similar electrochromic properties as conventional ProDOT devices, such as photopic contrast (48% compared to 46%) and switch speed (both 2 s). This method can be applied to any one-layer electrochromic system where improved stability is desired.