Robert Daniels
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Robert Daniels has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Gregory Allen Sotzing
Department of Chemistry, University of Connecticut, Storrs, Connecticut 06269, United States
5 shared publications - Yang Cao
Electrical Insulation Research Center, Institute of Materials Science, University of Connecticut, Storrs, CT 06269, USA
5 shared publications Ajinkya A. Deshmukh
Polymer Program, Institute of Materials Science, University of Connecticut, Storrs, USA
3 shared publicationsChao Wu
Electrical Insulation Research Center, Institute of Materials Science, University of Connecticut, Storrs, USA
3 shared publicationsGregory Sotzing
Materials Science Program, Institute of Materials Science, University of Connecticut, Storrs, USA
3 shared publicationsAshish Khomane
Materials Science Program, Institute of Materials Science, University of Connecticut, Storrs, USA
2 shared publications
Latest Publications
- Open Access
- 21 August 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1
Author Correction: AI-assisted discovery of high-temperature dielectrics for energy storage
- 21 August 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1
Open AccessAuthor Correction: AI-assisted discovery of high-temperature dielectrics for energy storage
- Top Cited PapersOpen Access
- 19 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
AI-assisted discovery of high-temperature dielectrics for energy storage
Electrostatic capacitors play a crucial role as energy storage devices in modern electrical systems. Energy density, the figure of merit for electrostatic capacitors, is primarily determined by the choice of dielectric material. Most industry-grade polymer dielectrics are flexible polyolefins or rigid aromatics, possessing high energy density or high thermal stability, but not both. Here, we employ artificial intelligence (AI), established polymer chemistry, and molecular engineering to discover a suite of dielectrics in the polynorbornene and polyimide families. Many of the discovered dielectrics exhibit high thermal stability and high energy density over a broad temperature range. One such dielectric displays an energy density of 8.3 J cc−1 at 200 °C, a value 11 × that of any commercially available polymer dielectric at this temperature. We also evaluate pathways to further enhance the polynorbornene and polyimide families, enabling these capacitors to perform well in demanding applications (e.g., aerospace) while being environmentally sustainable. These findings expand the potential applications of electrostatic capacitors within the 85–200 °C temperature range, at which there is presently no good commercial solution. More broadly, this research demonstrates the impact of AI on chemical structure generation and property prediction, highlighting the potential for materials design advancement beyond electrostatic capacitors.
- 19 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Top Cited PapersOpen AccessAI-assisted discovery of high-temperature dielectrics for energy storage
Electrostatic capacitors play a crucial role as energy storage devices in modern electrical systems. Energy density, the figure of merit for electrostatic capacitors, is primarily determined by the choice of dielectric material. Most industry-grade polymer dielectrics are flexible polyolefins or rigid aromatics, possessing high energy density or high thermal stability, but not both. Here, we employ artificial intelligence (AI), established polymer chemistry, and molecular engineering to discover a suite of dielectrics in the polynorbornene and polyimide families. Many of the discovered dielectrics exhibit high thermal stability and high energy density over a broad temperature range. One such dielectric displays an energy density of 8.3 J cc−1 at 200 °C, a value 11 × that of any commercially available polymer dielectric at this temperature. We also evaluate pathways to further enhance the polynorbornene and polyimide families, enabling these capacitors to perform well in demanding applications (e.g., aerospace) while being environmentally sustainable. These findings expand the potential applications of electrostatic capacitors within the 85–200 °C temperature range, at which there is presently no good commercial solution. More broadly, this research demonstrates the impact of AI on chemical structure generation and property prediction, highlighting the potential for materials design advancement beyond electrostatic capacitors.
- 11 January 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 57 (14) , 145502
Macro-dipoles in soft/hard expanded-polytetrafluoroethylene + fluoroethylenepropylene (ePTFE + FEP) fluoropolymer-film systems for high-output piezoelectric ferroelectret-transducer applications
Multi-layer ferroelectrets consisting of fluoroethylenepropylene (FEP) copolymer and open-porous expanded polytetrafluoroethylene (ePTFE) films exhibit stable internal electret charges, high piezoelectric coefficients and heat resistance, making them promising candidates for wearable sensors or nanogenerators in body-area networks. Here, three- and five-layer (FEP/ePTFE/FEP and FEP/ePTFE/FEP/ePTFE/FEP) ferroelectret stacks were laminated and poled in a corona discharge. The resulting charge distributions were measured by use of the pulsed electro-acoustic (PEA) method and revealed that charges of opposite polarity were trapped at the interfaces between the FEP and ePTFE layers. Thus, the existence of one macro-dipole in the three-layer structure and of two macro-dipoles in the five-layer structure was directly shown for the first time. Moreover, electric-displacement-versus-electric-field (D-E) loops revealed that remnant polarization is given by the number of macro-dipoles in the respective stack. Due to the addition of the macro-dipoles, the piezoelectric d 33 coefficient of the FEP/ePTFE/FEP/ePTFE/FEP stack reaches 200 pC/N even under a potentially non-uniform compression of the soft ePTFE layers. The results should be useful for a better understanding and a performance optimization of ferroelectrets in self-powered intelligent devices.
- 11 January 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 57 (14) , 145502
Macro-dipoles in soft/hard expanded-polytetrafluoroethylene + fluoroethylenepropylene (ePTFE + FEP) fluoropolymer-film systems for high-output piezoelectric ferroelectret-transducer applications
Multi-layer ferroelectrets consisting of fluoroethylenepropylene (FEP) copolymer and open-porous expanded polytetrafluoroethylene (ePTFE) films exhibit stable internal electret charges, high piezoelectric coefficients and heat resistance, making them promising candidates for wearable sensors or nanogenerators in body-area networks. Here, three- and five-layer (FEP/ePTFE/FEP and FEP/ePTFE/FEP/ePTFE/FEP) ferroelectret stacks were laminated and poled in a corona discharge. The resulting charge distributions were measured by use of the pulsed electro-acoustic (PEA) method and revealed that charges of opposite polarity were trapped at the interfaces between the FEP and ePTFE layers. Thus, the existence of one macro-dipole in the three-layer structure and of two macro-dipoles in the five-layer structure was directly shown for the first time. Moreover, electric-displacement-versus-electric-field (D-E) loops revealed that remnant polarization is given by the number of macro-dipoles in the respective stack. Due to the addition of the macro-dipoles, the piezoelectric d 33 coefficient of the FEP/ePTFE/FEP/ePTFE/FEP stack reaches 200 pC/N even under a potentially non-uniform compression of the soft ePTFE layers. The results should be useful for a better understanding and a performance optimization of ferroelectrets in self-powered intelligent devices.
- 13 December 2022
- Published by SAGE Publications in Cannabis & Cannabinoid Research
- Vol. 9 (2) , 486-494
Re-Examining Cannabidiol: Conversion to Tetrahydrocannabinol Using Only Heat
Introduction: In the last decade, the market for Cannabidiol (CBD) has grown to become a near $2 billion dollar industry in the United States alone. This growth can be attributed to a growing social acceptance of marijuana, a more detailed understanding of many health benefits attributed to cannabinoids, and the low cost and wide availibility of hemp-derived cannabinoids. Due to the complex legal histories of marijuana and cannabinoids, the stability and safety of CBD is still an area of interest as research has been restricted globally. Conversion of CBD to its psychoactive isomers, most notably delta-9-Tetrahydrocannabinol (Δ9-THC), presents a significant safety issue for consumers and producers of CBD products. Methods: Previous studies investigating the stability of CBD have focused mainly on replicating conditions experienced during long-term storage at room temperature or lower. Here, we report the thermal stability of CBD at 175°C. Dynamic 1 H-NMR experiments and computational electronic structure calculations were used to characterize possible reaction paths from CBD to THC. Results: After 30 minutes of heating, Δ9-THC was produced in detectable amounts in aerobic and anaerobic conditions without an acid catalyst. Conclusions: Our findings support an energetically feasible reaction route that is favorable due to both an increase in phenol acidity at high temperatures and the presence of intramolecular OH-π hydrogen bonding.
- 13 December 2022
- Published by SAGE Publications in Cannabis & Cannabinoid Research
- Vol. 9 (2) , 486-494
Re-Examining Cannabidiol: Conversion to Tetrahydrocannabinol Using Only Heat
Introduction: In the last decade, the market for Cannabidiol (CBD) has grown to become a near $2 billion dollar industry in the United States alone. This growth can be attributed to a growing social acceptance of marijuana, a more detailed understanding of many health benefits attributed to cannabinoids, and the low cost and wide availibility of hemp-derived cannabinoids. Due to the complex legal histories of marijuana and cannabinoids, the stability and safety of CBD is still an area of interest as research has been restricted globally. Conversion of CBD to its psychoactive isomers, most notably delta-9-Tetrahydrocannabinol (Δ9-THC), presents a significant safety issue for consumers and producers of CBD products. Methods: Previous studies investigating the stability of CBD have focused mainly on replicating conditions experienced during long-term storage at room temperature or lower. Here, we report the thermal stability of CBD at 175°C. Dynamic 1 H-NMR experiments and computational electronic structure calculations were used to characterize possible reaction paths from CBD to THC. Results: After 30 minutes of heating, Δ9-THC was produced in detectable amounts in aerobic and anaerobic conditions without an acid catalyst. Conclusions: Our findings support an energetically feasible reaction route that is favorable due to both an increase in phenol acidity at high temperatures and the presence of intramolecular OH-π hydrogen bonding.
- 16 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (38) , 42804-42811
Poly(cannabinoid)s: Hemp-Derived Biocompatible Thermoplastic Polyesters with Inherent Antioxidant Properties
The legalization of hemp cultivation in the United States has caused the price of hemp-derived cannabinoids to decrease 10-fold within 2 years. Cannabidiol (CBD), one of many naturally occurring diols found in hemp, can be purified in high yield for low cost, making it an interesting candidate for polymer feedstock. In this study, two polyesters were synthesized from the condensation of either CBD or cannabigerol (CBG) with adipoyl chloride. Poly(CBDAdipate) was cast into free-standing films and subjected to thermal, mechanical, and biological characterization. Poly(CBD-Adipate) films exhibited a lack of cytotoxicity toward adiposederived stem cells while displaying an inherent antioxidant activity compared to poly(lactide) films. Additionally, this material was found to be semi-crystalline and able to be melt-processed into a plastic hemp leaf using a silicone baking mold.
- 16 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (38) , 42804-42811
Poly(cannabinoid)s: Hemp-Derived Biocompatible Thermoplastic Polyesters with Inherent Antioxidant Properties
The legalization of hemp cultivation in the United States has caused the price of hemp-derived cannabinoids to decrease 10-fold within 2 years. Cannabidiol (CBD), one of many naturally occurring diols found in hemp, can be purified in high yield for low cost, making it an interesting candidate for polymer feedstock. In this study, two polyesters were synthesized from the condensation of either CBD or cannabigerol (CBG) with adipoyl chloride. Poly(CBDAdipate) was cast into free-standing films and subjected to thermal, mechanical, and biological characterization. Poly(CBD-Adipate) films exhibited a lack of cytotoxicity toward adiposederived stem cells while displaying an inherent antioxidant activity compared to poly(lactide) films. Additionally, this material was found to be semi-crystalline and able to be melt-processed into a plastic hemp leaf using a silicone baking mold.
- Open Access
- 13 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (37) , 42705-42712
Ion-Boosting the Charge Density and Piezoelectric Response of Ferroelectrets to Significantly High Levels
In contrast to molecular-dipole polymers, such as PVDF, ferroelectrets are a new class of flexible spatially heterogeneous piezoelectric polymers with closed or open voids that act as deformable macro-dipoles after charging. With a spectrum of manufacturing processes being developed to engineer the heterogeneous structures, ferroelectrets are made with attractive piezoelectric properties well-suited for applications, such as pressure sensors, acoustic transducers, etc. However, the sources of the macro-dipole charges have usually been the same, microscopic dielectric barrier discharges within the voids, induced when the ferroelectrets are poled under a large electric field typically via a so-called corona poling, resulting in the separation and trapping of opposite charges into the interior walls of the voids. Such a process is inherently self-limiting, as the reverse internal field from the macro-dipoles eventually extinguishes the microdischarges, resulting in limited density of ions and not too high overall piezoelectric performance. Here, a new method to form ferroelectrets with gigantic electroactivity is proposed and demonstrated with the aid of an external ion booster. A laminate consisting of expanded polytetrafluoroethylene (ePTFE) and fluorinated-ethylene-propylene (FEP) was prefilled with bipolar ions produced externally by an ionizer and sequentially poled to force the separation of positive and negative ions into the open fibrous structure, rendering an impressive piezoelectric d33 coefficient of 1600 pC/N─an improvement by a factor of 4 in comparison with the d33 of a similar sandwich poled with nonenhanced corona poling. The (pre)filling clearly increases the ion density in the open voids significantly. The charges stored in the open-cell structure stays at a high level for at least 4 months. In addition, an all-organic nanogenerator was made from an ePTFE-based ferroelectret, with conducting poly(3,4-ethylene dioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) coated fabric electrodes. When poled with this ion-boosting process, it yielded an output power twice that of a similar sample poled in a conventional corona-only process. The doubling in output power is mainly brought about by the significantly higher charge density achieved with the aid of external booster. Furthermore, aside from the bipolar ions, extra monopolar ions can during the corona poling be blown into the open pores by using for instance a negative ionic hair dryer to produce a unipolar ePTFE-based ferroelectret with its d33 coefficient enhanced by a factor of 3. Ion-boosting poling thus unleashes a new route to produce bipolar or unipolar open-cell ferroelectrets with highly enhanced piezoelectric response.
- 13 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (37) , 42705-42712
Open AccessIon-Boosting the Charge Density and Piezoelectric Response of Ferroelectrets to Significantly High Levels
In contrast to molecular-dipole polymers, such as PVDF, ferroelectrets are a new class of flexible spatially heterogeneous piezoelectric polymers with closed or open voids that act as deformable macro-dipoles after charging. With a spectrum of manufacturing processes being developed to engineer the heterogeneous structures, ferroelectrets are made with attractive piezoelectric properties well-suited for applications, such as pressure sensors, acoustic transducers, etc. However, the sources of the macro-dipole charges have usually been the same, microscopic dielectric barrier discharges within the voids, induced when the ferroelectrets are poled under a large electric field typically via a so-called corona poling, resulting in the separation and trapping of opposite charges into the interior walls of the voids. Such a process is inherently self-limiting, as the reverse internal field from the macro-dipoles eventually extinguishes the microdischarges, resulting in limited density of ions and not too high overall piezoelectric performance. Here, a new method to form ferroelectrets with gigantic electroactivity is proposed and demonstrated with the aid of an external ion booster. A laminate consisting of expanded polytetrafluoroethylene (ePTFE) and fluorinated-ethylene-propylene (FEP) was prefilled with bipolar ions produced externally by an ionizer and sequentially poled to force the separation of positive and negative ions into the open fibrous structure, rendering an impressive piezoelectric d33 coefficient of 1600 pC/N─an improvement by a factor of 4 in comparison with the d33 of a similar sandwich poled with nonenhanced corona poling. The (pre)filling clearly increases the ion density in the open voids significantly. The charges stored in the open-cell structure stays at a high level for at least 4 months. In addition, an all-organic nanogenerator was made from an ePTFE-based ferroelectret, with conducting poly(3,4-ethylene dioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) coated fabric electrodes. When poled with this ion-boosting process, it yielded an output power twice that of a similar sample poled in a conventional corona-only process. The doubling in output power is mainly brought about by the significantly higher charge density achieved with the aid of external booster. Furthermore, aside from the bipolar ions, extra monopolar ions can during the corona poling be blown into the open pores by using for instance a negative ionic hair dryer to produce a unipolar ePTFE-based ferroelectret with its d33 coefficient enhanced by a factor of 3. Ion-boosting poling thus unleashes a new route to produce bipolar or unipolar open-cell ferroelectrets with highly enhanced piezoelectric response.
- 20 October 2021
- Published by Wiley in Advanced Materials Technologies
- Vol. 7 (3) , 2100548
Electrochromic Fabric Displays from a Robust, Open‐Air Fabrication Technique
Current wearable technology is often bulky and restrictive to fluid movement. This work details a single‐layer, hydrophobic, printed electrochromic textile that switches wirelessly from red to blue with a switching speed ≈30 s. Using a hole‐through fabrication method, the flexible devices offer aesthetics to the display by concealing all electronic connections on their backsides while maintaining their “fabric” feel. First, an all organic electrochromic planar textile device is fabricated by screen printing commercially available poly (3,4‐ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT: PSS) onto finished poly (ethylene therephthalate) (PET) synthetic leather. A copolymer of 3,4‐bis(2‐ethylhexyloxy) thiophene and 3,4 dimethoxythiophene is then spray coated onto the printed PEDOT:PSS electrodes and the resulting device switched between red and blue at −1 and 2 V, respectively. A device is made to be hydrophobic by spray coating with a commercially available fabric protector. The electrochromic devices show promise for flexible display applications in any textile‐based markets, such as adaptive camouflage.
- 20 October 2021
- Published by Wiley in Advanced Materials Technologies
- Vol. 7 (3) , 2100548
Electrochromic Fabric Displays from a Robust, Open‐Air Fabrication Technique
Current wearable technology is often bulky and restrictive to fluid movement. This work details a single‐layer, hydrophobic, printed electrochromic textile that switches wirelessly from red to blue with a switching speed ≈30 s. Using a hole‐through fabrication method, the flexible devices offer aesthetics to the display by concealing all electronic connections on their backsides while maintaining their “fabric” feel. First, an all organic electrochromic planar textile device is fabricated by screen printing commercially available poly (3,4‐ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT: PSS) onto finished poly (ethylene therephthalate) (PET) synthetic leather. A copolymer of 3,4‐bis(2‐ethylhexyloxy) thiophene and 3,4 dimethoxythiophene is then spray coated onto the printed PEDOT:PSS electrodes and the resulting device switched between red and blue at −1 and 2 V, respectively. A device is made to be hydrophobic by spray coating with a commercially available fabric protector. The electrochromic devices show promise for flexible display applications in any textile‐based markets, such as adaptive camouflage.
- 2 August 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 125 (31) , 8907-8918
Long Vibrational Lifetime R-Selenocyanate Probes for Ultrafast Infrared Spectroscopy: Properties and Synthesis
Ultrafast infrared vibrational spectroscopy is widely used for the investigation of dynamics in systems from water to model membranes. Because the experimental observation window is limited to a few times the probe’s vibrational lifetime, a frequent obstacle for the measurement of a broad time range is short molecular vibrational lifetimes (typically a few to tens of picoseconds). Five new long-lifetime aromatic selenocyanate vibrational probes have been synthesized and their vibrational properties characterized. These probes are compared to commercial phenyl selenocyanate. The vibrational lifetimes range between ∼400 and 500 ps in complex solvents, which are some of the longest room-temperature vibrational lifetimes reported to date. In contrast to vibrations that are long-lived in simple solvents such as CCl4, but become much shorter in complex solvents, the probes discussed here have ∼400 ps lifetimes in complex solvents and even longer in simple solvents. One of them has a remarkable lifetime of 1235 ps in CCl4. These probes have a range of molecular sizes and geometries that can make them useful for placement into different complex materials due to steric reasons, and some of them have functionalities that enable their synthetic incorporation into larger molecules, such as industrial polymers. We investigated the effect of a range of electron-donating and electron-withdrawing para-substituents on the vibrational properties of the CN stretch. The probes have a solvent-independent linear relationship to the Hammett substituent parameter when evaluated with respect to the CN vibrational frequency and the ipso 13C NMR chemical shift.
- 2 August 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 125 (31) , 8907-8918
Long Vibrational Lifetime R-Selenocyanate Probes for Ultrafast Infrared Spectroscopy: Properties and Synthesis
Ultrafast infrared vibrational spectroscopy is widely used for the investigation of dynamics in systems from water to model membranes. Because the experimental observation window is limited to a few times the probe’s vibrational lifetime, a frequent obstacle for the measurement of a broad time range is short molecular vibrational lifetimes (typically a few to tens of picoseconds). Five new long-lifetime aromatic selenocyanate vibrational probes have been synthesized and their vibrational properties characterized. These probes are compared to commercial phenyl selenocyanate. The vibrational lifetimes range between ∼400 and 500 ps in complex solvents, which are some of the longest room-temperature vibrational lifetimes reported to date. In contrast to vibrations that are long-lived in simple solvents such as CCl4, but become much shorter in complex solvents, the probes discussed here have ∼400 ps lifetimes in complex solvents and even longer in simple solvents. One of them has a remarkable lifetime of 1235 ps in CCl4. These probes have a range of molecular sizes and geometries that can make them useful for placement into different complex materials due to steric reasons, and some of them have functionalities that enable their synthetic incorporation into larger molecules, such as industrial polymers. We investigated the effect of a range of electron-donating and electron-withdrawing para-substituents on the vibrational properties of the CN stretch. The probes have a solvent-independent linear relationship to the Hammett substituent parameter when evaluated with respect to the CN vibrational frequency and the ipso 13C NMR chemical shift.
- 1 September 2020
- Published by IOP Publishing in Flexible and Printed Electronics
- Vol. 5 (3) , 035009
Integrated dry poly(3,4-ethylenedioxythiophene):polystyrene sulfonate electrodes on finished textiles for continuous and simultaneous monitoring of electrocardiogram, electromyogram and electrodermal activity
Herein, screen printed electrodes prepared from commercially available conducting polymer poly(3,4-ethylenedioxythiophene):polystyrene sulfonate have been shown to record simultaneous electromyogram (EMG), electrocardiogram (ECG), and electrodermal activity (EDA) from a spandex t-shirt sleeve in dry state. Secondly, electrodes printed on an arm sleeve recorded EMG during muscle contraction and were compared to commercial Ag/AgCl electrodes that use hydrogel. Thirdly, the printed electrodes have been shown to be stable to ten washes with detergent and ten dry cycles upon treatment with commercially sold fabric protectors with ECG signals being recorded in underwater conditions from wrist. Lastly, EDA was measured from fingers by recording changes in skin conductance brought about by cognitive stress. This use of integrated sensors on a t-shirt provides a tool for continuous and simultaneous measurement of vital signals in at-risk patients.
- 1 September 2020
- Published by IOP Publishing in Flexible and Printed Electronics
- Vol. 5 (3) , 035009
Integrated dry poly(3,4-ethylenedioxythiophene):polystyrene sulfonate electrodes on finished textiles for continuous and simultaneous monitoring of electrocardiogram, electromyogram and electrodermal activity
Herein, screen printed electrodes prepared from commercially available conducting polymer poly(3,4-ethylenedioxythiophene):polystyrene sulfonate have been shown to record simultaneous electromyogram (EMG), electrocardiogram (ECG), and electrodermal activity (EDA) from a spandex t-shirt sleeve in dry state. Secondly, electrodes printed on an arm sleeve recorded EMG during muscle contraction and were compared to commercial Ag/AgCl electrodes that use hydrogel. Thirdly, the printed electrodes have been shown to be stable to ten washes with detergent and ten dry cycles upon treatment with commercially sold fabric protectors with ECG signals being recorded in underwater conditions from wrist. Lastly, EDA was measured from fingers by recording changes in skin conductance brought about by cognitive stress. This use of integrated sensors on a t-shirt provides a tool for continuous and simultaneous measurement of vital signals in at-risk patients.