Leon N. A. van Adrichem
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Leon N. A. van Adrichem has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Otto D. M. Kronig
University Medical Center Utrecht
7 shared publications - Sophia A. J. Kronig
University Medical Center Utrecht
7 shared publications - Henri A. Vrooman
Department of Radiology, Erasmus MC, Rotterdam, University Medical Centre Rotterdam, Rotterdam, The Netherlands
2 shared publications - Jifke F. Veenland
Department of Radiology and Nuclear Medicine, Erasmus MC, 3015 GD Rotterdam, The Netherlands
2 shared publications - Aebele Barber Mink van der Molen
Department of Pediatric Plastic and Reconstructive Surgery (KE.04.140.5), Wilhelmina Children's Hospital, P.O. Box 85090, 3508 AB, Utrecht, the Netherlands
1 shared publication - Andrea L. J. Kortlever
Knowledge Institute of the Federation of Medical Specialists, 3528 BL Utrecht, The Netherlands
1 shared publication
Latest Publications
- Open Access
- 11 May 2022
- Published by SAGE Publications in The Cleft Palate Craniofacial Journal
- Vol. 60 (10) , 1273-1283
UCSQ Method Applied on 3D Photogrammetry: Non-Invasive Objective Differentiation Between Synostotic and Positional Plagiocephaly
Objective: Objective differentiation between unilateral coronal synostosis (UCS) and positional posterior plagiocephaly (PPP) based on 3D photogrammetry according to Utrecht Cranial Shape Quantificator (UCSQ). Design: Retrospective study. Setting: Primary craniofacial center. Patients, Participants: Thirty-two unoperated patients (17 UCS; 15 PPP) (age < 1 year). Interventions: Extraction of variables from sinusoid curves derived using UCSQ: asymmetry ratio forehead and occiput peak, ratio of gradient forehead and occiput peak, location forehead and occiput peak. Main Outcome Measure(s): Variables, derived using 3D photogrammetry, were analyzed for differentiation between UCS and PPP. Results: Frontal peak was shifted to the right side of the head in left-sided UCS (mean x -value 207 [192-220]), and right-sided PPP (mean x -value 210 [200-216]), and to the left in right-sided UCS (mean x -value 161 [156-166]), and left-sided PPP (mean x -value 150 [144-154]). Occipital peak was significantly shifted to the right side of the head in left-sided PPP (mean x -value 338 [336-340]) and to the left in right-sided PPP (mean x -value 23 [14-32]). Mean x -value of occipital peak was 9 (354-30) in left- and 2 (350-12) in right-sided UCS. Calculated ratio of gradient of the frontal peak is, in combination with the calculated asymmetry ratio of the frontal peak, a distinctive finding. Conclusions: UCSQ objectively captures shape of synostotic and positional plagiocephaly using 3D photogrammetry, we therefore developed a suitable method to objectively differentiate UCS from PPP using radiation-free methods.
- 11 May 2022
- Published by SAGE Publications in The Cleft Palate Craniofacial Journal
- Vol. 60 (10) , 1273-1283
Open AccessUCSQ Method Applied on 3D Photogrammetry: Non-Invasive Objective Differentiation Between Synostotic and Positional Plagiocephaly
Objective: Objective differentiation between unilateral coronal synostosis (UCS) and positional posterior plagiocephaly (PPP) based on 3D photogrammetry according to Utrecht Cranial Shape Quantificator (UCSQ). Design: Retrospective study. Setting: Primary craniofacial center. Patients, Participants: Thirty-two unoperated patients (17 UCS; 15 PPP) (age < 1 year). Interventions: Extraction of variables from sinusoid curves derived using UCSQ: asymmetry ratio forehead and occiput peak, ratio of gradient forehead and occiput peak, location forehead and occiput peak. Main Outcome Measure(s): Variables, derived using 3D photogrammetry, were analyzed for differentiation between UCS and PPP. Results: Frontal peak was shifted to the right side of the head in left-sided UCS (mean x -value 207 [192-220]), and right-sided PPP (mean x -value 210 [200-216]), and to the left in right-sided UCS (mean x -value 161 [156-166]), and left-sided PPP (mean x -value 150 [144-154]). Occipital peak was significantly shifted to the right side of the head in left-sided PPP (mean x -value 338 [336-340]) and to the left in right-sided PPP (mean x -value 23 [14-32]). Mean x -value of occipital peak was 9 (354-30) in left- and 2 (350-12) in right-sided UCS. Calculated ratio of gradient of the frontal peak is, in combination with the calculated asymmetry ratio of the frontal peak, a distinctive finding. Conclusions: UCSQ objectively captures shape of synostotic and positional plagiocephaly using 3D photogrammetry, we therefore developed a suitable method to objectively differentiate UCS from PPP using radiation-free methods.
- Open Access
- 20 October 2021
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 10 (21) , 4813
Clinical Practice Guidelines on the Treatment of Patients with Cleft Lip, Alveolus, and Palate: An Executive Summary
Significant treatment variation exists in the Netherlands between teams treating patients with cleft lip, alveolus, and/or palate, resulting in a confusing and undesirable situation for patients, parents, and practitioners. Therefore, to optimize cleft care, clinical practice guidelines (CPGs) were developed. The aim of this report is to describe CPG development, share the main recommendations, and indicate knowledge gaps regarding cleft care. Together with patients and parents, a multidisciplinary working group of representatives from all relevant disciplines assisted by two experienced epidemiologists identified the topics to be addressed in the CPGs. Searching the Medline, Embase, and Cochrane Library databases identified 5157 articles, 60 of which remained after applying inclusion and exclusion criteria. We rated the quality of the evidence from moderate to very low. The working group formulated 71 recommendations regarding genetic testing, feeding, lip and palate closure, hearing, hypernasality, bone grafting, orthodontics, psychosocial guidance, dentistry, osteotomy versus distraction, and rhinoplasty. The final CPGs were obtained after review by all stakeholders and allow cleft teams to base their treatment on current knowledge. With high-quality evidence lacking, the need for additional high-quality studies has become apparent.
- 20 October 2021
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 10 (21) , 4813
Open AccessClinical Practice Guidelines on the Treatment of Patients with Cleft Lip, Alveolus, and Palate: An Executive Summary
Significant treatment variation exists in the Netherlands between teams treating patients with cleft lip, alveolus, and/or palate, resulting in a confusing and undesirable situation for patients, parents, and practitioners. Therefore, to optimize cleft care, clinical practice guidelines (CPGs) were developed. The aim of this report is to describe CPG development, share the main recommendations, and indicate knowledge gaps regarding cleft care. Together with patients and parents, a multidisciplinary working group of representatives from all relevant disciplines assisted by two experienced epidemiologists identified the topics to be addressed in the CPGs. Searching the Medline, Embase, and Cochrane Library databases identified 5157 articles, 60 of which remained after applying inclusion and exclusion criteria. We rated the quality of the evidence from moderate to very low. The working group formulated 71 recommendations regarding genetic testing, feeding, lip and palate closure, hearing, hypernasality, bone grafting, orthodontics, psychosocial guidance, dentistry, osteotomy versus distraction, and rhinoplasty. The final CPGs were obtained after review by all stakeholders and allow cleft teams to base their treatment on current knowledge. With high-quality evidence lacking, the need for additional high-quality studies has become apparent.
- Open Access
- 24 September 2021
- Published by SAGE Publications in The Cleft Palate Craniofacial Journal
- Vol. 59 (9) , 1107-1113
Validation of Skully Care as a Fast Method for Quantifying Positional Cranial Deformities
Objective: Craniofacial measuring is valuable for diagnosis and evaluation of growth and treatment of positional skull deformities. Plagiocephalometry (PCM) quantifies skull deformities and is proven to be reliable and valid. However, PCM needs direct skin contact with thermoplastic material, is laborious and time-consuming. Therefore, Skully Care (SC) was developed to measure positional skull deformities with a smartphone application. Design: SC is retrospectively compared to PCM. Setting: Pediatric physiotherapy centers. Patients: Age ≤1 year, analyzed or treated for positional skull deformities. Interventions: A total of 60 skull shape analyses were performed. Main Outcome Measures: The main outcome measures employed are Pearson correlation coefficient between cranial vault asymmetry index (CVAI; in SC) and oblique diameter difference index (ODDI; in PCM) and between cranial index (CI; in SC) and cranial proportional index (CPI; in PCM). Mann–Whitney U test determined difference of time consumption between PCM and SC. Results: High correlation was found between CVAI and ODDI ( r = 0.849; P < .01) in positional plagiocephaly and very high correlation between CI and CPI ( r = 0.938; P < .01) in positional brachycephaly. SC is significantly faster than PCM ( P < .001). Conclusions: SC is valid in analyzing positional skull deformities and strongly correlates to PCM, the gold standard in daily physiotherapy practice. The combination of simplicity, validity, speed, and user and child convenience makes SC a promising craniofacial measuring method in daily practice. SC has potential to be the modern successor for analyzing positional skull deformities.
- 24 September 2021
- Published by SAGE Publications in The Cleft Palate Craniofacial Journal
- Vol. 59 (9) , 1107-1113
Open AccessValidation of Skully Care as a Fast Method for Quantifying Positional Cranial Deformities
Objective: Craniofacial measuring is valuable for diagnosis and evaluation of growth and treatment of positional skull deformities. Plagiocephalometry (PCM) quantifies skull deformities and is proven to be reliable and valid. However, PCM needs direct skin contact with thermoplastic material, is laborious and time-consuming. Therefore, Skully Care (SC) was developed to measure positional skull deformities with a smartphone application. Design: SC is retrospectively compared to PCM. Setting: Pediatric physiotherapy centers. Patients: Age ≤1 year, analyzed or treated for positional skull deformities. Interventions: A total of 60 skull shape analyses were performed. Main Outcome Measures: The main outcome measures employed are Pearson correlation coefficient between cranial vault asymmetry index (CVAI; in SC) and oblique diameter difference index (ODDI; in PCM) and between cranial index (CI; in SC) and cranial proportional index (CPI; in PCM). Mann–Whitney U test determined difference of time consumption between PCM and SC. Results: High correlation was found between CVAI and ODDI ( r = 0.849; P < .01) in positional plagiocephaly and very high correlation between CI and CPI ( r = 0.938; P < .01) in positional brachycephaly. SC is significantly faster than PCM ( P < .001). Conclusions: SC is valid in analyzing positional skull deformities and strongly correlates to PCM, the gold standard in daily physiotherapy practice. The combination of simplicity, validity, speed, and user and child convenience makes SC a promising craniofacial measuring method in daily practice. SC has potential to be the modern successor for analyzing positional skull deformities.
- Open Access
- 17 June 2021
- Published by SAGE Publications in The Cleft Palate Craniofacial Journal
- Vol. 59 (6) , 794-799
Intracranial Volume Not Correlated With Severity in Trigonocephaly
Objectives: Severity of trigonocephaly varies and potentially affects intracranial volume (ICV) and intracranial pressure (ICP). The aim of this study is to measure ICV in trigonocephaly patients and compare it to normative data and correlate ICV with the severity of the skull deformity according to UCSQ (Utrecht Cranial Shape Quantifier). Design: Retrospective study. Setting: Primary craniofacial center. Patients, Participants: Nineteen preoperative patients with nonsyndromic trigonocephaly (age ≤12 months). Intervention: Intracranial volume was measured on preoperative computed tomography (CT) scans by manual segmentation (OsiriX Fondation). Utrecht Cranial Shape Quantifier was used to quantify the severity of the skull deformity. When present, papilledema as sign of elevated ICP was noted. Main Outcome Measures(s): Measured ICV was compared to Lichtenberg normative cranial volume growth curves, and Pearson correlation coefficient was used to correlate UCSQ with the ICV. Results: Mean age at CT scan was 6 months (2-11). Mean measured ICV was 842 mL (579-1124). Thirteen of h19 patients (11/15 boys and 2/4 girls) had an ICV between ±2 SD curves of Lichtenberg, 2 of 19 (1/15 boys and 1/4 girls) had an ICV less than −2 SD and 4 of 19 (3/15 boys and 1/4 girls) had an ICV greater than +2 SD. Mean UCSQ severity of trigonocephaly was 2.40 (−622.65 to 1279.75). Correlation between severity and ICV was negligible (r = −0.11). No papilledema was reported. Conclusions: Measured ICV was within normal ranges for trigonocephaly patients, in both mild and severe cases. No correlation was found between severity of trigonocephaly and ICV.
- 17 June 2021
- Published by SAGE Publications in The Cleft Palate Craniofacial Journal
- Vol. 59 (6) , 794-799
Open AccessIntracranial Volume Not Correlated With Severity in Trigonocephaly
Objectives: Severity of trigonocephaly varies and potentially affects intracranial volume (ICV) and intracranial pressure (ICP). The aim of this study is to measure ICV in trigonocephaly patients and compare it to normative data and correlate ICV with the severity of the skull deformity according to UCSQ (Utrecht Cranial Shape Quantifier). Design: Retrospective study. Setting: Primary craniofacial center. Patients, Participants: Nineteen preoperative patients with nonsyndromic trigonocephaly (age ≤12 months). Intervention: Intracranial volume was measured on preoperative computed tomography (CT) scans by manual segmentation (OsiriX Fondation). Utrecht Cranial Shape Quantifier was used to quantify the severity of the skull deformity. When present, papilledema as sign of elevated ICP was noted. Main Outcome Measures(s): Measured ICV was compared to Lichtenberg normative cranial volume growth curves, and Pearson correlation coefficient was used to correlate UCSQ with the ICV. Results: Mean age at CT scan was 6 months (2-11). Mean measured ICV was 842 mL (579-1124). Thirteen of h19 patients (11/15 boys and 2/4 girls) had an ICV between ±2 SD curves of Lichtenberg, 2 of 19 (1/15 boys and 1/4 girls) had an ICV less than −2 SD and 4 of 19 (3/15 boys and 1/4 girls) had an ICV greater than +2 SD. Mean UCSQ severity of trigonocephaly was 2.40 (−622.65 to 1279.75). Correlation between severity and ICV was negligible (r = −0.11). No papilledema was reported. Conclusions: Measured ICV was within normal ranges for trigonocephaly patients, in both mild and severe cases. No correlation was found between severity of trigonocephaly and ICV.
- Open Access
- 10 February 2021
- Published by Springer Nature in Child's Nervous System
- Vol. 37 (5) , 1687-1694
Orbital volume, ophthalmic sequelae and severity in unilateral coronal synostosis
Purpose: Unilateral coronal synostosis (UCS) results in an asymmetrical skull, including shallow and asymmetrical orbits, associated with reduced orbital volume and high prevalences of ophthalmic sequelae. Aim is to link orbital volumes in patients with UCS to severity according to UCSQ (Utrecht Cranial Shape Quantifier) and presence of ophthalmic sequelae. Methods: We included preoperative patients with UCS (≤ 18 months). Orbital volume was measured on CT scans by manual segmentation (Mimics software (Materialise, Leuven, Belgium)), and severity of UCS was determined by UCSQ. Orbital volume of affected side was compared to unaffected side using Wilcoxon signed rank test. Orbital volume ratio was calculated (affected/unaffected volume) and compared to the category of UCSQ by Kruskal-Wallis test. Opthalmic sequelae were noted. Results: We included 19 patients (mean age 7 months). Orbital volume on affected side was significantly lower (p = 0.001), mean orbital volume ratio was 0.93 (SD 0.03). No significant differences in group means of orbital volume ratio between different levels of severity of UCSQ were found (Kruskal-Wallis H (2) = 0.873; p > 0.05). Ophthalmic sequelae were found in 3 patients; one had adduction impairment and strabismus (mild UCS), one had astigmatism (moderate UCS), and one had abduction impairment (on both ipsi- and contralateral side) and vertical strabismus (severe UCS). Conclusion: No association between orbital volume ratio and severity of UCS was found. Side-to-side asymmetry in orbital volume was noted. No association between either preoperative orbital volume ratio or severity of UCS and the presence of preoperative ophthalmic sequelae was found.
- 10 February 2021
- Published by Springer Nature in Child's Nervous System
- Vol. 37 (5) , 1687-1694
Open AccessOrbital volume, ophthalmic sequelae and severity in unilateral coronal synostosis
Purpose: Unilateral coronal synostosis (UCS) results in an asymmetrical skull, including shallow and asymmetrical orbits, associated with reduced orbital volume and high prevalences of ophthalmic sequelae. Aim is to link orbital volumes in patients with UCS to severity according to UCSQ (Utrecht Cranial Shape Quantifier) and presence of ophthalmic sequelae. Methods: We included preoperative patients with UCS (≤ 18 months). Orbital volume was measured on CT scans by manual segmentation (Mimics software (Materialise, Leuven, Belgium)), and severity of UCS was determined by UCSQ. Orbital volume of affected side was compared to unaffected side using Wilcoxon signed rank test. Orbital volume ratio was calculated (affected/unaffected volume) and compared to the category of UCSQ by Kruskal-Wallis test. Opthalmic sequelae were noted. Results: We included 19 patients (mean age 7 months). Orbital volume on affected side was significantly lower (p = 0.001), mean orbital volume ratio was 0.93 (SD 0.03). No significant differences in group means of orbital volume ratio between different levels of severity of UCSQ were found (Kruskal-Wallis H (2) = 0.873; p > 0.05). Ophthalmic sequelae were found in 3 patients; one had adduction impairment and strabismus (mild UCS), one had astigmatism (moderate UCS), and one had abduction impairment (on both ipsi- and contralateral side) and vertical strabismus (severe UCS). Conclusion: No association between orbital volume ratio and severity of UCS was found. Side-to-side asymmetry in orbital volume was noted. No association between either preoperative orbital volume ratio or severity of UCS and the presence of preoperative ophthalmic sequelae was found.
- Open Access
- 5 November 2020
- Published by Springer Nature in European Journal of Pediatrics
- Vol. 180 (4) , 1211-1217
New diagnostic approach of the different types of isolated craniosynostosis
In this study, we diagnose skull shape deformities by analysing sinusoid curves obtained from standardized computed tomography (CT) slices of the skull for the common craniosynostoses (scaphocephaly, brachycephaly, trigonocephaly, right- and left-sided anterior plagiocephaly). Scaphocephaly has a high forehead peak and low troughs, in contrast to brachycephaly. Anterior plagiocephaly has asymmetry and shifting of the forehead peak. Trigonocephaly has a high and narrow frontal peak. Control patients have a symmetrical skull shape with low troughs and a high and broader frontal peak. Firstly, we included 5 children of every group of the common craniosynostoses and additionally 5 controls for extraction and calculation of characteristics. A diagnostic flowchart was developed. Secondly, we included a total of 51 craniosynostosis patients to validate the flowchart. All patients were correctly classified using the flowchart.Conclusion: Our study proposes and implements a new diagnostic approach of craniosynostosis. We describe a diagnostic flowchart based on specific characteristics for every type of craniosynostosis related to the specific skull deformities and control patients. All variables are expressed in number; therefore, we are able to use these variables in future research to quantify the different types of craniosynostosis. What is Known:• Premature fusion of one or more cranial sutures results in a specific cranial shape.• Clinical diagnosis is relatively simple; however, objective diagnosis based on distinctive values is difficult. What is New:• Using external landmarks and curve analysis, distinctive variables, and values for every type of craniosynostosis related to the specific skull deformities were determined and used to create a diagnostic flowchart for diagnosis.• Validation with an independent data set of 51 patients showed that all patients were correctly classified.
- 5 November 2020
- Published by Springer Nature in European Journal of Pediatrics
- Vol. 180 (4) , 1211-1217
Open AccessNew diagnostic approach of the different types of isolated craniosynostosis
In this study, we diagnose skull shape deformities by analysing sinusoid curves obtained from standardized computed tomography (CT) slices of the skull for the common craniosynostoses (scaphocephaly, brachycephaly, trigonocephaly, right- and left-sided anterior plagiocephaly). Scaphocephaly has a high forehead peak and low troughs, in contrast to brachycephaly. Anterior plagiocephaly has asymmetry and shifting of the forehead peak. Trigonocephaly has a high and narrow frontal peak. Control patients have a symmetrical skull shape with low troughs and a high and broader frontal peak. Firstly, we included 5 children of every group of the common craniosynostoses and additionally 5 controls for extraction and calculation of characteristics. A diagnostic flowchart was developed. Secondly, we included a total of 51 craniosynostosis patients to validate the flowchart. All patients were correctly classified using the flowchart.Conclusion: Our study proposes and implements a new diagnostic approach of craniosynostosis. We describe a diagnostic flowchart based on specific characteristics for every type of craniosynostosis related to the specific skull deformities and control patients. All variables are expressed in number; therefore, we are able to use these variables in future research to quantify the different types of craniosynostosis. What is Known:• Premature fusion of one or more cranial sutures results in a specific cranial shape.• Clinical diagnosis is relatively simple; however, objective diagnosis based on distinctive values is difficult. What is New:• Using external landmarks and curve analysis, distinctive variables, and values for every type of craniosynostosis related to the specific skull deformities were determined and used to create a diagnostic flowchart for diagnosis.• Validation with an independent data set of 51 patients showed that all patients were correctly classified.
- Open Access
- 18 October 2020
- Published by Springer Nature in Child's Nervous System
- Vol. 37 (4) , 1175-1183
New method for quantification of severity of isolated scaphocephaly linked to intracranial volume
Purpose: The aim is to implement Utrecht Cranial Shape Quantificator (UCSQ) for quantification of severity of scaphocephaly and compare UCSQ with the most used quantification method, cranial index (CI). Additionally, severity is linked to intracranial volume (ICV). Methods: Sinusoid curves of 21 pre-operative children (age < 2 years) with isolated scaphocephaly were created. Variables of UCSQ (width of skull and maximum occiput and forehead) were combined to determine severity. CI was calculated. Three raters performed visual scoring for clinical severity (rating of 6 items; total score of 12 represents most severe form). Pearson’s correlation test was used for correlation between UCSQ and visual score and between both CIs. ICV was calculated using OsiriX. ICV was compared to normative values and correlated to severity. Results: Mean UCSQ was 22.00 (2.00–42.00). Mean traditional CI was 66.01 (57.36–78.58), and mean visual score was 9.1 (7–12). Correlations between both traditional CI and CI of UCSQ and overall visual scores were moderate and high (r = − 0.59; p = 0.005 vs. r = − 0.81; p < 0.000). Mean ICV was 910 mL (671–1303), and ICV varied from decreased to increased compared to normative values. Negligible correlation was found between ICV and UCSQ (r = 0.26; p > 0.05) and between ICV and CI and visual score (r = − 0.30; p > 0.05 and r = 0.17; p > 0.05, respectively). Conclusion: Our current advice is to use traditional CI in clinical practice; it is easy to use and minimally invasive. However, UCSQ is more precise and objective and captures whole skull shape. Therefore, UCSQ is preferable for research. Additionally, more severe scaphocephaly does not result in more deviant skull volumes.
- 18 October 2020
- Published by Springer Nature in Child's Nervous System
- Vol. 37 (4) , 1175-1183
Open AccessNew method for quantification of severity of isolated scaphocephaly linked to intracranial volume
Purpose: The aim is to implement Utrecht Cranial Shape Quantificator (UCSQ) for quantification of severity of scaphocephaly and compare UCSQ with the most used quantification method, cranial index (CI). Additionally, severity is linked to intracranial volume (ICV). Methods: Sinusoid curves of 21 pre-operative children (age < 2 years) with isolated scaphocephaly were created. Variables of UCSQ (width of skull and maximum occiput and forehead) were combined to determine severity. CI was calculated. Three raters performed visual scoring for clinical severity (rating of 6 items; total score of 12 represents most severe form). Pearson’s correlation test was used for correlation between UCSQ and visual score and between both CIs. ICV was calculated using OsiriX. ICV was compared to normative values and correlated to severity. Results: Mean UCSQ was 22.00 (2.00–42.00). Mean traditional CI was 66.01 (57.36–78.58), and mean visual score was 9.1 (7–12). Correlations between both traditional CI and CI of UCSQ and overall visual scores were moderate and high (r = − 0.59; p = 0.005 vs. r = − 0.81; p < 0.000). Mean ICV was 910 mL (671–1303), and ICV varied from decreased to increased compared to normative values. Negligible correlation was found between ICV and UCSQ (r = 0.26; p > 0.05) and between ICV and CI and visual score (r = − 0.30; p > 0.05 and r = 0.17; p > 0.05, respectively). Conclusion: Our current advice is to use traditional CI in clinical practice; it is easy to use and minimally invasive. However, UCSQ is more precise and objective and captures whole skull shape. Therefore, UCSQ is preferable for research. Additionally, more severe scaphocephaly does not result in more deviant skull volumes.
- Open Access
- 17 April 2020
- Published by Springer Nature in European Journal of Pediatrics
- Vol. 179 (10) , 1569-1577
Introducing a new method for classifying skull shape abnormalities related to craniosynostosis
We present a novel technique for classification of skull deformities due to most common craniosynostosis. We included 5 children of every group of the common craniosynostoses (scaphocephaly, brachycephaly, trigonocephaly, and right- and left-sided anterior plagiocephaly) and additionally 5 controls. Our outline-based classification method is described, using the software programs OsiriX, MeVisLab, and Matlab. These programs were used to identify chosen landmarks (porion and exocanthion), create a base plane and a plane at 4 cm, segment outlines, and plot resulting graphs. We measured repeatability and reproducibility, and mean curves of groups were analyzed. All raters achieved excellent intraclass correlation scores (0.994–1.000) and interclass correlation scores (0.989–1.000) for identifying the external landmarks. Controls, scaphocephaly, trigonocephaly, and brachycephaly all have the peak of the forehead in the middle of the curve (180°). In contrary, in anterior plagiocephaly, the peak is shifted (to the left of graph in right-sided and vice versa). Additionally, controls, scaphocephaly, and trigonocephaly have a high peak of the forehead; scaphocephaly has the lowest troughs; in brachycephaly, the width/frontal peak ratio has the highest value with a low frontal peak.Conclusion: We introduced a preliminary study showing an objective and reproducible methodology using CT scans for the analysis of craniosynostosis and potential application of our method to 3D photogrammetry. What is Known:• Diagnosis of craniosynostosis is relatively simple; however, classification of craniosynostosis is difficult and current techniques are not widely applicable. What is New:• We introduce a novel technique for classification of skull deformities due to craniosynostosis, an objective and reproducible methodology using CT scans resulting in characteristic curves. The method is applicable to all 3D-surface rendering techniques.• Using external landmarks and curve analysis, specific and characteristic curves for every type of craniosynostosis related to the specific skull deformities are found.
- 17 April 2020
- Published by Springer Nature in European Journal of Pediatrics
- Vol. 179 (10) , 1569-1577
Open AccessIntroducing a new method for classifying skull shape abnormalities related to craniosynostosis
We present a novel technique for classification of skull deformities due to most common craniosynostosis. We included 5 children of every group of the common craniosynostoses (scaphocephaly, brachycephaly, trigonocephaly, and right- and left-sided anterior plagiocephaly) and additionally 5 controls. Our outline-based classification method is described, using the software programs OsiriX, MeVisLab, and Matlab. These programs were used to identify chosen landmarks (porion and exocanthion), create a base plane and a plane at 4 cm, segment outlines, and plot resulting graphs. We measured repeatability and reproducibility, and mean curves of groups were analyzed. All raters achieved excellent intraclass correlation scores (0.994–1.000) and interclass correlation scores (0.989–1.000) for identifying the external landmarks. Controls, scaphocephaly, trigonocephaly, and brachycephaly all have the peak of the forehead in the middle of the curve (180°). In contrary, in anterior plagiocephaly, the peak is shifted (to the left of graph in right-sided and vice versa). Additionally, controls, scaphocephaly, and trigonocephaly have a high peak of the forehead; scaphocephaly has the lowest troughs; in brachycephaly, the width/frontal peak ratio has the highest value with a low frontal peak.Conclusion: We introduced a preliminary study showing an objective and reproducible methodology using CT scans for the analysis of craniosynostosis and potential application of our method to 3D photogrammetry. What is Known:• Diagnosis of craniosynostosis is relatively simple; however, classification of craniosynostosis is difficult and current techniques are not widely applicable. What is New:• We introduce a novel technique for classification of skull deformities due to craniosynostosis, an objective and reproducible methodology using CT scans resulting in characteristic curves. The method is applicable to all 3D-surface rendering techniques.• Using external landmarks and curve analysis, specific and characteristic curves for every type of craniosynostosis related to the specific skull deformities are found.