Sergey I. Stepanov
Research Subjects
Research Interests
Sergey I. Stepanov has a total of 204 co-authors. Here are the top co-authors by number of shared publications:
- Alexei I. Pechnikov
TDI, Inc., 12214 Plum Orchard Dr., Silver Spring, MD 20904, USA
9 shared publications - Yu.G. Shreter
Физико-технический институт им. А.Ф. Иоффе РАН, Санкт-Петербург, Россия
6 shared publications V. I. Nikolaev
Ioffe Institute, St. Petersburg, Russia
5 shared publications- N. B. Smirnov
National University of Science and Technology MISIS 2 , Moscow 119049, Russia
4 shared publications V.E. Bougrov
4 shared publicationsV.I. Nikolaev
4 shared publications
Latest Publications
- Open Access
- 26 March 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (12)
Planar defects in α-Ga2O3 thin films produced by HVPE
The defect structure of α-phase gallium oxide thin films was investigated using transmission electron microscopy (TEM). Epitaxial Ga2O3 films were grown via halide vapor-phase epitaxy on c-plane sapphire substrates. TEM analysis revealed a high density of extended planar defects within the films, primarily located along prismatic planes of {112¯0} type. Displacement vectors were determined using the invisibility criterion for stacking faults. The study encompassed both planar and cross-sectional views of the films. It is hypothesized that these defects form due to the motion of edge partial dislocations with the 13⟨11¯00⟩ Burgers vector. Various mechanisms of their formation have been explored.
- 26 March 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (12)
Open AccessPlanar defects in α-Ga2O3 thin films produced by HVPE
The defect structure of α-phase gallium oxide thin films was investigated using transmission electron microscopy (TEM). Epitaxial Ga2O3 films were grown via halide vapor-phase epitaxy on c-plane sapphire substrates. TEM analysis revealed a high density of extended planar defects within the films, primarily located along prismatic planes of {112¯0} type. Displacement vectors were determined using the invisibility criterion for stacking faults. The study encompassed both planar and cross-sectional views of the films. It is hypothesized that these defects form due to the motion of edge partial dislocations with the 13⟨11¯00⟩ Burgers vector. Various mechanisms of their formation have been explored.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Technical Physics Letters
- Vol. 49 (S2) , S142-S145
Growth of Thick ε(κ)-Ga2O3 Films by Halide Vapor Phase Epitaxy
High crystalline quality epitaxial films of orthorhombic gallium oxide ε(κ)-Ga2O3 with a thickness of more 20 μm have been grown for the first time using halide vapor phase epitaxy. Sapphire wafers with preliminarily deposited GaN layers were used as substrates. The properties of the produced films are studied by X-ray diffraction and electron microscopy. The results are considered an important step towards obtaining thick layers and quasi-bulk ε(κ)-Ga2O3 crystals for practical applications in electronics and sensor technology.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Technical Physics Letters
- Vol. 49 (S2) , S142-S145
Growth of Thick ε(κ)-Ga2O3 Films by Halide Vapor Phase Epitaxy
High crystalline quality epitaxial films of orthorhombic gallium oxide ε(κ)-Ga2O3 with a thickness of more 20 μm have been grown for the first time using halide vapor phase epitaxy. Sapphire wafers with preliminarily deposited GaN layers were used as substrates. The properties of the produced films are studied by X-ray diffraction and electron microscopy. The results are considered an important step towards obtaining thick layers and quasi-bulk ε(κ)-Ga2O3 crystals for practical applications in electronics and sensor technology.
- Open Access
- 29 March 2023
- Published by Kola Science Centre in Transactions of the Kоla Science Centre of RAS. Series: Engineering Sciences
- Vol. 1 (1/2023) , 122-126
Production of yttrium concentrate from collective REE concentrate in carbonate medium
The paper presents the results of a study of the extraction of rare earth elements of their collective carbonate concentrate in aqueous solutions of sodium carbonate under various conditions. The possibility of selective extraction of yttrium and heavy group lanthanides with the production of 70% rough yttrium concentrate is shown.
- 29 March 2023
- Published by Kola Science Centre in Transactions of the Kоla Science Centre of RAS. Series: Engineering Sciences
- Vol. 1 (1/2023) , 122-126
Open AccessProduction of yttrium concentrate from collective REE concentrate in carbonate medium
The paper presents the results of a study of the extraction of rare earth elements of their collective carbonate concentrate in aqueous solutions of sodium carbonate under various conditions. The possibility of selective extraction of yttrium and heavy group lanthanides with the production of 70% rough yttrium concentrate is shown.
- 1 January 2023
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 12 (1) , 015002
HVPE Growth and Characterization of Thick κ-Ga2O3 layers on GaN/Sapphire Templates
Ga2O3 layers with thickness from 10 to 86 μm were grown by halide vapor phase epitaxy (HVPE) on GaN(0001)/sapphire templates in a hot wall reactor at 570 °C, with the growth rate of about 3–4 μm h−1. The grown layers consisted of pure (001)-oriented κ-Ga2O3 polymorph with no admixture of β-Ga2O3 or α-Ga2O3 phases. The narrowest (004) X-ray rocking curves were observed for 13–20 μm thick κ-Ga2O3 layers. A further increase in thickness results in deterioration of the crystal quality which is indicated by the broadening of rocking curves. Electrical measurements of the thick layers revealed that they were n-type, with the concentration of shallow donors gradually decreasing from ∼1016 cm−3 to ∼1015 cm−3. Deep level transient spectroscopy (DLTS) measurements revealed the presence of deep traps with levels near Ec−0.3 eV, Ec−0.6 eV, Ec−0.7 eV, Ec−0.8 eV, Ec−1 eV, with the Ec−0.8 eV being predominant.
- 1 January 2023
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 12 (1) , 015002
HVPE Growth and Characterization of Thick κ-Ga2O3 layers on GaN/Sapphire Templates
Ga2O3 layers with thickness from 10 to 86 μm were grown by halide vapor phase epitaxy (HVPE) on GaN(0001)/sapphire templates in a hot wall reactor at 570 °C, with the growth rate of about 3–4 μm h−1. The grown layers consisted of pure (001)-oriented κ-Ga2O3 polymorph with no admixture of β-Ga2O3 or α-Ga2O3 phases. The narrowest (004) X-ray rocking curves were observed for 13–20 μm thick κ-Ga2O3 layers. A further increase in thickness results in deterioration of the crystal quality which is indicated by the broadening of rocking curves. Electrical measurements of the thick layers revealed that they were n-type, with the concentration of shallow donors gradually decreasing from ∼1016 cm−3 to ∼1015 cm−3. Deep level transient spectroscopy (DLTS) measurements revealed the presence of deep traps with levels near Ec−0.3 eV, Ec−0.6 eV, Ec−0.7 eV, Ec−0.8 eV, Ec−1 eV, with the Ec−0.8 eV being predominant.
- 23 December 2022
- Published by Elsevier in Materials Today Communications
- Vol. 34
Low-resistivity gas sensors based on the In2O3-Ga2O3 mixed compounds films
- 23 December 2022
- Published by Elsevier in Materials Today Communications
- Vol. 34
Low-resistivity gas sensors based on the In2O3-Ga2O3 mixed compounds films
- Open Access
- 1 June 2022
- Published by AIP Publishing in APL Materials
- Vol. 10 (6) , 061102
Structural and electrical properties of thick κ-Ga2O3 grown on GaN/sapphire templates
Thick (23 µm) films of κ-Ga2O3 were grown by Halide Vapor Phase Epitaxy (HVPE) on GaN/sapphire templates at 630 °C. X-ray analysis confirmed the formation of single-phase κ-Ga2O3 with half-widths of the high-resolution x-ray diffraction (004), (006), and (008) symmetric reflections of 4.5 arc min and asymmetric (027) reflection of 14 arc min. Orthorhombic κ-Ga2O3 polymorph formation was confirmed from analysis of the Kikuchi diffraction pattern in electron backscattering diffraction. Secondary electron imaging indicated a reasonably flat surface morphology with a few (area density ∼103 cm−2) approximately circular (diameter ∼50–100 µm) uncoalesced regions, containing κ-Ga2O3 columns with in-plane dimensions and a height of about 10 µm. Micro-cathodoluminescence (MCL) spectra showed a wide 2–3.5 eV band that could be deconvoluted into narrower bands peaked at 2.59, 2.66, 2.86, and 3.12 eV. Ni Schottky diodes prepared on the films showed good rectification but a high series resistance. The films had a thin near-surface region dominated by Ec − 0.7 eV deep centers and a deeper region (∼2 µm from the surface) dominated by shallow donors with concentrations of ≤1016 cm−3. Photocurrent and photocapacitance spectra showed the presence of deep compensating acceptors with optical ionization energies of ∼1.35 and 2.3 eV, the latter being close to the energy of one of the MCL bands. Deep level transient spectroscopy revealed deep traps with energies near 0.3, 0.6, 0.7, 0.8, and 1 eV from the conduction band edge. The results show the potential of HVPE to grow very thick κ-Ga2O3 on GaN/sapphire templates.
- 1 June 2022
- Published by AIP Publishing in APL Materials
- Vol. 10 (6) , 061102
Open AccessStructural and electrical properties of thick κ-Ga2O3 grown on GaN/sapphire templates
Thick (23 µm) films of κ-Ga2O3 were grown by Halide Vapor Phase Epitaxy (HVPE) on GaN/sapphire templates at 630 °C. X-ray analysis confirmed the formation of single-phase κ-Ga2O3 with half-widths of the high-resolution x-ray diffraction (004), (006), and (008) symmetric reflections of 4.5 arc min and asymmetric (027) reflection of 14 arc min. Orthorhombic κ-Ga2O3 polymorph formation was confirmed from analysis of the Kikuchi diffraction pattern in electron backscattering diffraction. Secondary electron imaging indicated a reasonably flat surface morphology with a few (area density ∼103 cm−2) approximately circular (diameter ∼50–100 µm) uncoalesced regions, containing κ-Ga2O3 columns with in-plane dimensions and a height of about 10 µm. Micro-cathodoluminescence (MCL) spectra showed a wide 2–3.5 eV band that could be deconvoluted into narrower bands peaked at 2.59, 2.66, 2.86, and 3.12 eV. Ni Schottky diodes prepared on the films showed good rectification but a high series resistance. The films had a thin near-surface region dominated by Ec − 0.7 eV deep centers and a deeper region (∼2 µm from the surface) dominated by shallow donors with concentrations of ≤1016 cm−3. Photocurrent and photocapacitance spectra showed the presence of deep compensating acceptors with optical ionization energies of ∼1.35 and 2.3 eV, the latter being close to the energy of one of the MCL bands. Deep level transient spectroscopy revealed deep traps with energies near 0.3, 0.6, 0.7, 0.8, and 1 eV from the conduction band edge. The results show the potential of HVPE to grow very thick κ-Ga2O3 on GaN/sapphire templates.
- 1 January 2022
- Published by Ioffe Institute Russian Academy of Sciences in Technical Physics Letters
- Vol. 48 (10) , 32
Growth of thick ε(kappa)-Ga-=SUB=-2-=/SUB=-O-=SUB=-3-=/SUB=- films by halide vapor phase epitaxy
High crystalline quality epitaxial films of orthorhombic gallium oxide ε(kappa)-Ga2O3 with a thickness of more 20 μm have been grown for the first time using halide vapor phase epitaxy. Sapphire wafers with preliminarily deposited GaN layers were used as substrates. The properties of the produced films are studied by X-ray diffraction and electron microscopy. The results are considered an important step towards obtaining thick layers and quasi-bulk ε(kappa)-Ga2O3 crystals for practical applications in electronics and sensor technology. Keywords: gallium oxide, halide vapor phase epitaxy, polymorph, X-ray diffraction
- 1 January 2022
- Published by Ioffe Institute Russian Academy of Sciences in Technical Physics Letters
- Vol. 48 (10) , 32
Growth of thick ε(kappa)-Ga-=SUB=-2-=/SUB=-O-=SUB=-3-=/SUB=- films by halide vapor phase epitaxy
High crystalline quality epitaxial films of orthorhombic gallium oxide ε(kappa)-Ga2O3 with a thickness of more 20 μm have been grown for the first time using halide vapor phase epitaxy. Sapphire wafers with preliminarily deposited GaN layers were used as substrates. The properties of the produced films are studied by X-ray diffraction and electron microscopy. The results are considered an important step towards obtaining thick layers and quasi-bulk ε(kappa)-Ga2O3 crystals for practical applications in electronics and sensor technology. Keywords: gallium oxide, halide vapor phase epitaxy, polymorph, X-ray diffraction
- 1 January 2022
- Published by Ioffe Institute Russian Academy of Sciences in Письма в журнал технической физики
- Vol. 48 (19)
Получение толстых слоев ε(kappa)-Ga-=SUB=-2-=/SUB=-O-=SUB=-3-=/SUB=- методом хлоридной эпитаксии
Получение толстых слоев ε(kappa)-Ga 2 O 3 методом хлоридной эпитаксии
- 1 January 2022
- Published by Ioffe Institute Russian Academy of Sciences in Письма в журнал технической физики
- Vol. 48 (19)
Получение толстых слоев ε(kappa)-Ga-=SUB=-2-=/SUB=-O-=SUB=-3-=/SUB=- методом хлоридной эпитаксии
Получение толстых слоев ε(kappa)-Ga 2 O 3 методом хлоридной эпитаксии
- 30 May 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-01 (56) , 1475
Effect of Oxygen on the Gas-Sensitive Properties of α-Ga2O3/ε-Ga2O3 Structures
Miniature O2 sensors with low energy consumption are of practical interest for the chemical and metallurgical industries, development of systems for analyzing the performance of internal combustion engines and as functional elements of artificial lung ventilation devices. The requirements for miniaturization, high sensitivity, speed and relative cheapness are satisfied by O2 sensors based on β-Ga2O3. The chemical and thermal stability of β-Ga2O3 allows developing gas sensors with extremely high operating temperatures of 400-1100 °C ensuring high reproducibility of their characteristics and high speed of operation. In turn, the high operating temperatures of O2 β-Ga2O3 sensors are their drawback causing high energy consumption. Previously, we studied the effect of H2 on the gas-sensitive properties of the α-Ga2O3/ε-Ga2O3 structure with Pt contacts grown by the halide vapor phase epitaxy (HVPE) on the patterned sapphire substrates (PSS) [1]. Low operating temperatures, weak dependence of properties on the humidity and control of selectivity by means of voltage changes indicate that the research of α-Ga2O3/ε-Ga2O3 structures as sensitive elements of gas sensors is promising. We presume that in addition to increasing the applied voltage to the structures, the sensitivity of α-Ga2O3/ε-Ga2O3 to certain gases, in particular O2 can be increased by reducing the level of doping with a donor impurity. Thus this work is devoted to research the effect of O2 on gas-sensitive properties of α-Ga2O3/ε-Ga2O3 structures doped with Sn. Ga2O3 films were grown by the HVPE in Perfect Crystals LLC. PSS of (0001) orientation and 430 microns in thickness were used as substrates. During the synthesis, the films were doped with Sn. To measure the gas-sensitive properties of the α-Ga2O3/ε-Ga2O3 structures Pt contacts were formed on their surface. The samples consisted of a mixture of α and ε phases with the orientation (0001). Using scanning and transmission electron microscopy, it was found that the α-phase forms columnar structures at the top of the sapphire cone, and the ε-phase fills the gaps between the columns. The characteristic triangular shape of columnar structures indicates that they consist of α-Ga2O3 with trigonal symmetry. ɛ-Ga2O3 has a grain but not polycrystalline structure taking into account the XRD results. Figure 1 shows the I-U characteristics of α-Ga2O3/ε-Ga2O3 structures at the exposure of O2 in a wide range of concentrations C O2 from 2 to 100 % at temperature T = 200 °C. The current through the samples decreases with C O2 increasing. In the range of the T = 180 - 200 °C, at T = 200 °C, the highest response to O2 are observed. It is worth noting that the operating temperatures of the α-Ga2O3/ε-Ga2O3 structures in the reaction to O2 are significantly lower than the operating temperatures of O2 β-Ga2O3 sensors. These low values of T are an advantage in developing gas-analytical systems with low energy consumption. The concentration dependences of the response at the T = 180 - 200 °C are approximated fairly accurately by a power function: response ~ C O2 b , where b is the exponent that depends on the temperature. Figure 1-Effect of O2 on I-U characteristics of α-Ga2O3/ε-Ga2O3. A decrease in the Sn impurity concentration in α-Ga2O3/ε-Ga2O3 from ~4×1018 cm-3 to ~1.5×1017 cm-3 leads to a significant sensitivity to O2 in the temperature range from 180 to 220 °C at low values of the applied voltage U ≤ 7.5 V. The I-U characteristics of α-Ga2O3/ε-Ga2O3 structures in a dry gas mixture N2 + O2 are described by the model of MSM structures based on the theory of thermoelectronic emission in diode approximation with the resistance of the semiconductor layer exceeding the resistance of the space charge regions at the metal/semiconductor interface. The sensory effect consists in the chemisorption of oxygen molecules on the surface of ε-Ga2O3 that according to SEM has a grain structure. As a result, the energy barrier at the grain boundaries of ε-Ga2O3 increases leading to a decrease in the current. The studied structures showed high sensitivity to relatively low concentrations (0.745 %) of H2 and CO at the T = 180-220 °C and practically did not react to the effects of NO2 and CH4. This research was financially supported by the Russian Scientific Foundation, grant No 20-79-10043. [1] A V Almaev, V I Nikolaev, S I Stepanov, A I Pechnikov, A V Chikiryaka, N N Yakovlev, V M Kalygina, V V Kopyev and E V Chernikov. J. Phys. D: Appl. Phys. 53 (2020) 414004 (9pp) https://doi.org/10.1088/1361-6463/ab9c69 Figure 1
- 30 May 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-01 (56) , 1475
Effect of Oxygen on the Gas-Sensitive Properties of α-Ga2O3/ε-Ga2O3 Structures
Miniature O2 sensors with low energy consumption are of practical interest for the chemical and metallurgical industries, development of systems for analyzing the performance of internal combustion engines and as functional elements of artificial lung ventilation devices. The requirements for miniaturization, high sensitivity, speed and relative cheapness are satisfied by O2 sensors based on β-Ga2O3. The chemical and thermal stability of β-Ga2O3 allows developing gas sensors with extremely high operating temperatures of 400-1100 °C ensuring high reproducibility of their characteristics and high speed of operation. In turn, the high operating temperatures of O2 β-Ga2O3 sensors are their drawback causing high energy consumption. Previously, we studied the effect of H2 on the gas-sensitive properties of the α-Ga2O3/ε-Ga2O3 structure with Pt contacts grown by the halide vapor phase epitaxy (HVPE) on the patterned sapphire substrates (PSS) [1]. Low operating temperatures, weak dependence of properties on the humidity and control of selectivity by means of voltage changes indicate that the research of α-Ga2O3/ε-Ga2O3 structures as sensitive elements of gas sensors is promising. We presume that in addition to increasing the applied voltage to the structures, the sensitivity of α-Ga2O3/ε-Ga2O3 to certain gases, in particular O2 can be increased by reducing the level of doping with a donor impurity. Thus this work is devoted to research the effect of O2 on gas-sensitive properties of α-Ga2O3/ε-Ga2O3 structures doped with Sn. Ga2O3 films were grown by the HVPE in Perfect Crystals LLC. PSS of (0001) orientation and 430 microns in thickness were used as substrates. During the synthesis, the films were doped with Sn. To measure the gas-sensitive properties of the α-Ga2O3/ε-Ga2O3 structures Pt contacts were formed on their surface. The samples consisted of a mixture of α and ε phases with the orientation (0001). Using scanning and transmission electron microscopy, it was found that the α-phase forms columnar structures at the top of the sapphire cone, and the ε-phase fills the gaps between the columns. The characteristic triangular shape of columnar structures indicates that they consist of α-Ga2O3 with trigonal symmetry. ɛ-Ga2O3 has a grain but not polycrystalline structure taking into account the XRD results. Figure 1 shows the I-U characteristics of α-Ga2O3/ε-Ga2O3 structures at the exposure of O2 in a wide range of concentrations C O2 from 2 to 100 % at temperature T = 200 °C. The current through the samples decreases with C O2 increasing. In the range of the T = 180 - 200 °C, at T = 200 °C, the highest response to O2 are observed. It is worth noting that the operating temperatures of the α-Ga2O3/ε-Ga2O3 structures in the reaction to O2 are significantly lower than the operating temperatures of O2 β-Ga2O3 sensors. These low values of T are an advantage in developing gas-analytical systems with low energy consumption. The concentration dependences of the response at the T = 180 - 200 °C are approximated fairly accurately by a power function: response ~ C O2 b , where b is the exponent that depends on the temperature. Figure 1-Effect of O2 on I-U characteristics of α-Ga2O3/ε-Ga2O3. A decrease in the Sn impurity concentration in α-Ga2O3/ε-Ga2O3 from ~4×1018 cm-3 to ~1.5×1017 cm-3 leads to a significant sensitivity to O2 in the temperature range from 180 to 220 °C at low values of the applied voltage U ≤ 7.5 V. The I-U characteristics of α-Ga2O3/ε-Ga2O3 structures in a dry gas mixture N2 + O2 are described by the model of MSM structures based on the theory of thermoelectronic emission in diode approximation with the resistance of the semiconductor layer exceeding the resistance of the space charge regions at the metal/semiconductor interface. The sensory effect consists in the chemisorption of oxygen molecules on the surface of ε-Ga2O3 that according to SEM has a grain structure. As a result, the energy barrier at the grain boundaries of ε-Ga2O3 increases leading to a decrease in the current. The studied structures showed high sensitivity to relatively low concentrations (0.745 %) of H2 and CO at the T = 180-220 °C and practically did not react to the effects of NO2 and CH4. This research was financially supported by the Russian Scientific Foundation, grant No 20-79-10043. [1] A V Almaev, V I Nikolaev, S I Stepanov, A I Pechnikov, A V Chikiryaka, N N Yakovlev, V M Kalygina, V V Kopyev and E V Chernikov. J. Phys. D: Appl. Phys. 53 (2020) 414004 (9pp) https://doi.org/10.1088/1361-6463/ab9c69 Figure 1
- 21 November 2020
- Published by Wiley in Physica Status Solidi (a)
- Vol. 218 (3)
Halide Vapor Phase Epitaxy of In2O3 and (In1−xGax)2O3 on Sapphire Substrates and GaN/Al2O3 Templates
The growth of cubic and rhombohedral In2O3 and (InGa)2O3 epitaxial films by halide vapor phase epitaxy (HVPE) is reported. The deposition is carried out at 625 °C using indium trichloride (InCl3), gallium monochloride (GaCl), and O2 precursors on (0001) sapphire substrates, HVPE‐grown Ga2O3/Al2O3 and metal‐organic chemical vapor deposition (MOCVD)‐grown GaN/Al2O3 templates. The HVPE growth of phase pure In2O3 and (InGa)2O3 with corundum structure is reported for the first time.
- 21 November 2020
- Published by Wiley in Physica Status Solidi (a)
- Vol. 218 (3)
Halide Vapor Phase Epitaxy of In2O3 and (In1−xGax)2O3 on Sapphire Substrates and GaN/Al2O3 Templates
The growth of cubic and rhombohedral In2O3 and (InGa)2O3 epitaxial films by halide vapor phase epitaxy (HVPE) is reported. The deposition is carried out at 625 °C using indium trichloride (InCl3), gallium monochloride (GaCl), and O2 precursors on (0001) sapphire substrates, HVPE‐grown Ga2O3/Al2O3 and metal‐organic chemical vapor deposition (MOCVD)‐grown GaN/Al2O3 templates. The HVPE growth of phase pure In2O3 and (InGa)2O3 with corundum structure is reported for the first time.