APAlena V. Popkova

Alena V. Popkova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alena V. Popkova has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of IR pyrolysis temperature on the structure and properties of metal–carbon composites based on CoMn-ZIF bimetallic zeolite-like frameworks

    by D. G. Muratov, L. V. Kozhitov, I. V. Zaporotskova, A. V. Popkova, A. V. Zorin, V. A. Tarala, N. P. Boroznina, S. V. Boroznin

  • Open Access

    Electrochemical properties of CoMn/C based on zeolite-like metal-organic frameworks

    by Dmitriy G. Muratov, Lev V. Kozhitov, Irina V. Zaporotskova, Vladimir V. Sleptsov, Artem V. Zorin, Alena V. Popkova, Nikita I. Nikitenko, Andrey A. Vasilev, Ivan V. Silaev

    Herein, we report a systematic investigation of the synthesis methodology, structural characteristics, and electrochemical performance of CoMn/C metal-carbon nanocomposites derived via IR pyrolysis from manganese-substituted metal-organic frameworks (MOFs) exhibiting ZIF-67 topology. The MOF precursors were synthesized utilizing a chemical co-precipitation approach in aqueous media under ultrasonic treatment, with systematic variation of Co:Mn molar ratios ranging from 95:5 to 50:50, employing 2-methylimidazole as the organic linking agent. X-ray diffraction analysis coupled with electron microscopy investigations revealed that manganese incorporation into the cobalt sites is feasible up to a Co:Mn ratio of 70:30 while maintaining the intrinsic ZIF-67 crystalline architecture, concomitantly leading to a systematic reduction in crystallite dimensions from 36 to 21 nm and corresponding morphological modifications. The subsequent IR pyrolysis conducted within the temperature range of 500–700 °C yielded metal-carbon nanocomposites comprising homogeneously dispersed Co, MnO 2 , and Mn 3 O 4 nanoparticles within a porous carbonaceous matrix. Electrochemical characterization demonstrated optimal specific capacitance values of 336 F/g at 0.25 A/g current density for nanocomposites exhibiting Co:Mn ratio of 80:20, synthesized at the optimal pyrolysis temperature of 600 °C. The resultant materials exhibited exceptional cycling stability, maintaining capacitance retention exceeding 95 % through 1000 charge-discharge cycles, while demonstrating robust performance across a broad potential window up to 1.4 V in 6M KOH aqueous electrolyte. The enhanced specific capacitance values are attributed to the synergistic contribution of double-layer capacitance from the developed porous carbon framework and pseudocapacitive effects arising from reversible redox processes of metallic nanoparticles and their corresponding oxides. These findings elucidate the significant potential of Mn-substituted MOFs as precursors for the fabrication of high-performance electrode materials in symmetric supercapacitor applications, exhibiting superior electrochemical characteristics.


  • Open Access

    Nitrogen-carbon nanotubes as a basis for a new type of semiconductor materials for electronics devices

    by Irina V. Zaporotskova, Sergey V. Boroznin, Natalia P. Boroznina, Evgeniy S. Dryuchkov, Kseniya Yu. Verevkina, Yulia V Butenko, Pavel A. Zaporotskov, Lev V. Kozhitov, Alena V. Popkova, Aleksandr D. Grigoriev

    The use of semiconductor nanomaterials is currently considered to be one of the most promising device optimization methods since those materials allow controlling the electronic properties and possess high mechanical and thermal strength, providing for long device service life without the necessity of replacement or seeking new solutions. The parameters of the electronic and energy structure of new semiconductor nanomaterials based on carbon nanotubes containing substitution atoms have been studied. The test carbon nanotubes contained specific substitution atom concentrations (15, 25 and 50%). A relationship has been drawn between the band gap, conductivity and optical properties of the materials. Data on the band gap and conductivity as functions of substituting nitrogen atom concentration and tube diameter have been reported. The experimental band gap data suggest that the nanotubes in question are narrow-gap semiconductors. One can also conclude that a new semiconductor material has been synthesized on the basis of carbon nanotubes with substitution nitrogen atoms since the test tubes exhibit a redistribution of electron density towards the nitrogen atoms and positive charge localization in the vicinity of the carbon atoms. The results are of utmost importance for the design and fabrication of components and units for nanoelectronics and microsystems: our theoretical study has confirmed the possibility to control the refraction index and conductivity of media by implementing a carbon-for-nitrogen substitution reaction to various concentrations. Thus, a new electronics material has been studied, i.e., carbon nanotubes modified by substitution of nitrogen atoms.


  • Electrode Materials Based on Carbon and Metal-Organic Framework Structures with Built-In Chemically Active and Functional Elements (Review)

    by D. G. Muratov, V. V. Sleptsov, L. V. Kozhitov, I. V. Zaporotskova, A. V. Popkova, A. O. Diteleva, D. Yu. Kukushkin, R. A. Tsyrkov, A. V. Zorin

    Currently, the maximum specific energy capacity of 260 W h/kg has been achieved in lithium chemical power sources (CCSs), while in capacitors, it is 5–10 W h/kg. Traditional thick-film technology for the production of CCS and capacitor structures has not provided the necessary dynamics of growth in the specific energy capacity of CCS and supercapacity capacitor structures for more than 10 years. There is also a tendency to reduce significantly the specific energy capacity in order to improve the level of safety and long-term operation [1–9]. At the same time, there are reports of higher results in specific energy capacity. However, this is usually associated with a simultaneous decrease in the number of cycles or operational safety. A promising direction for achieving a specific energy capacity of current sources of more than 300 W h/kg is the creation of electrode materials in the form of a carbon matrix with a high specific surface area, into which a chemically active material is embedded. Carbon materials (graphite, amorphous carbon, metal-organic framework structures (MOFs)) currently occupy a dominant position as electrode materials [10–14]. In the paper, we present an overview of various types of carbon matrices with a high specific surface area and the technology of filling them with chemically active and auxiliary materials. The primary attention is paid to promising matrices based on metal-organic frameworks and commercially available rolled carbon materials such as Busofit. Their structural features are considered, and a classification is presented. The main methods and approaches to the synthesis of both the MOFs themselves and composite materials based on them are considered. As one of the options for changing the properties of MOFs and composite materials based on them, an approach based on doping MOFs with a ZIF-67 structure with another metal is presented. In particular, a scientific team of authors has implemented the synthesis of cobalt MOFs, in which Co is partially replaced by manganese at the synthesis stage. Besides, a simple synthesis technique by coprecipitation in an aqueous solution, but modified by ultrasonic exposure, which reduces the duration of synthesis, is used. Electrochemical studies show that the specific electrochemical capacity of electrodes from pyrolyzed MOFs with partial substitution of cobalt with manganese is significantly higher than that of materials without manganese. At an increase in the manganese content in MOFs, both the specific capacity and the energy density increase. Doping MOFs with Mn allows for a significant improvement (from 100 to 298 F g–1 at a current density of 0.25 A g–1) in the electrochemical characteristics of electrode materials for hybrid supercapacitors based on them. The results obtained by the authors indicate that the substitution of cobalt with manganese is an effective way to improve the electrochemical characteristics of MOFs.

  • Effect of Boron Impurities of Different Concentrations on the Sensory Properties of Carbon Nanotubes with Respect to Carbon Dioxide

    by S. V. Boroznin, I. V. Zaporotskova, P. A. Zaporotskov, N. P. Boroznina, L. V. Kozhitov, A. V. Popkova

    Nanotubes, being one of the most sought after materials in nanotechnology, are finding new areas of application, such as filters for harmful gases. However, in practical applications of nanotubes, it often turns out that, after capturing the analyzed substance, there is no change in their electronic state. This makes it difficult to detect the fact of adsorption of a substance by electronic devices, such as touch sensors. One way to solve this problem could be to modify the surface of carbon nanotubes with various atoms, which leads to the creation of nanotubular heterostructures. One of the most effective substances for carrying out the substitution reaction is boron. It allows the creation of a redistribution of the electron density on the surface of nanotubes without introducing significant changes to the topology of the nanotube surface. This, in turn, leads to a change in the electron-energy structure of the resulting systems and can lead to a more pronounced change in this structure during the sorption of atoms and molecules on the surface of such modified nanotubes. This paper analyzes the effect of boron impurities of different concentrations on the sensory activity of such boron-modified carbon nanotubes towards carbon dioxide to study the possibility of using boron-carbon systems such as a material for high-performance sensors.

  • Open Access

    Electrode materials based on carbon and metal-organic framework structures with built-in chemically active and functional elements

    by D. G. Muratov, V. V. Sleptsov, L. V. Kozhitov, I. V. Zaporotskova, A. V. Popkova, A. O. Diteleva, D. Yu. Kukushkin, R. A. Tsyrkov, A. V. Zorin

    The paper presents an overview of various types of carbon matrices with a high specific surface area and the technology of filling them with chemically active and auxiliary materials. The main attention is paid to promising matrices based on metal-organic frameworks (MOFs) and on commercially available rolled carbon materials such as Busofit. Their structural features are considered and their classification is presented. The main methods and approaches to the synthesis of both MOFs themselves and composite materials based on them are considered.As one of the options for changing the properties of MOFs and composite materials based on them, an approach based on doping MOFs with a ZIF-67 structure with another metal is presented. In particular, the scientific team of authors implemented the synthesis of cobalt MOFs, in which Co is partially replaced by manganese at the synthesis stage. In addition, a simple synthesis technique was used by coprecipitation in an aqueous solution, but modified by ultrasonic exposure, which reduces the duration of the synthesis. Electrochemical studies have shown that the specific electrochemical capacity of electrodes from pyrolyzed MOFs with partial substitution of cobalt with manganese is significantly higher than that of materials without manganese. With an increase in the manganese content in MOFs, both the specific capacity and the energy density increase. Doping MOFs with Mn allows for a significant (from 100 to 298 F/g at a current density of 0.25 A/g) improvement in the electrochemical characteristics of electrode materials for hybrid supercapacitors based on them. The results obtained by the authors indicate that substituting cobalt with manganese is an effective way to improve the electrochemical characteristics of MOFs.


  • Open Access

    Metal-organic frameworks and composites on their basis: structure, synthesis methods, electrochemical properties and application prospects (a review)

    by Dmitriy G. Muratov, Lev V. Kozhitov, Irina V. Zaporotskova, Alena V. Popkova, Vladimir V. Sleptsov, Artem V. Zorin

    Various types of metal-organic frameworks (MOF) and their structural parameters have been reviewed and their classification has been presented. Most widely used synthesis methods and approaches for MOF and composites on their basis have been discussed. MOF structure is a regular 3D lattice formed by organic linkers and metallic clusters. It has been shown for an example of literary data on MOF synthesis and structural studies that the types of bonds and metals can strongly affect the spatial structure and dimensions of MOF crystals: they can have nano-, micro- and meso-dimensions, be dense or porous, bulk or layered. This variety of structural parameters determines the wide range of their properties and potential applications. Prospects and methods of controlling the shapes of the crystals, their size and spatial bonds between organic components and metal ions have been reviewed. Major attention has been paid to zeolite-like frameworks (ZIF) as the most promising ones from the viewpoint of structure, synthesis and electrochemical current source applications. Discussion has touched on possible modifications and methods of controlling the properties of those MOFs and composites on their basis and introduction of impurities, including those having magnetic properties. Possible synthesis options of complex composites through controlled MOF pyrolysis have been presented, for either small-batch or scalable processes. The effect of heat treatment conditions on the final properties and electrochemical applications of those materials has been demonstrated. ZIF-67 structured MOF doping with one more metal has been presented as variant of modifying the properties of MOF and composites on their basis. For example, the Authors have implemented cobalt MOF synthesis wherein cobalt is partially substituted for manganese at the synthesis stage. Furthermore, a simple water solution co-deposition synthesis technique has been modified with ultrasonication thus reducing the time consumption of the process. Electrochemical studies have shown that the unit electrochemical capacity of pyrolyzed MOF electrodes with partial cobalt substitution for manganese is appreciably higher as compared to the manganese-free materials. The unit capacity and energy density increase with manganese content in the MOF. MOF manganese doping delivers a considerable improvement in the electrochemical parameters of the electrode materials for hybrid supercapacitors on their basis (from 100 to 298 F/g at 0.25 A/g current density). The results suggest that cobalt substitution for manganese is an effective method of improving the electrochemical parameters of MOFs. It has been demonstrated that the development of new approaches to the design of MOF based composite materials and the study of the physicochemical regularities of their interaction with various carriers is an important task.


  • Open Access

    Effect of boron impurities of different concentrations on the sensory properties of carbon nanotubes with respect to carbon dioxide

    by S. V. Boroznin, I. V. Zaporotskova, P. A. Zaporotskov, N. P. Boroznina, L. V. Kozhitov, A. V. Popkova

    Nanotubes, being one of the most sought after materials in nanotechnology, are finding new areas of application, such as filters for harmful gases. However, in practical applications of nanotubes, it often turns out that, after capturing the analyzed substance, there is no change in their electronic state. This makes it difficult to detect the fact of adsorption of a substance by electronic devices, such as touch sensors. One way to solve this problem could be to modify the surface of carbon nanotubes with various atoms, which leads to the creation of nanotubular heterostructures. One of the most effective substances for carrying out the substitution reaction is boron. It allows the creation of a redistribution of the electron density on the surface of nanotubes without introducing significant changes to the topology of the nanotube surface. This, in turn, leads to a change in the electron-energy structure of the resulting systems and can lead to a more pronounced change in this structure during the sorption of atoms and molecules on the surface of such modified nanotubes. This paper analyzes the effect of boron impurities of different concentrations on the sensory activity of such boron-modified carbon nanotubes towards carbon dioxide to study the possibility of using boron-carbon systems such as a material for high-performance sensors.

  • Open Access

    Metal-organic frame structures and composites based on them: structural features, synthesis methods, electrochemical properties and prospects (review)

    by D. G. Muratov, L. V. Kozhitov, I. V. Zaporotskova, A. V. Popkova, V. V. Sleptsov, A. V. Zorin

    This paper presents an overview of various types of organometallic frameworks (MOFs), their structural features, and classification. The main methods and approaches to the synthesis of both MOFs and composite materials based on them are also considered.The structure of MOFs is a regular three-dimensional lattice formed by organic linkers and metal clusters. The nature of interconnections and types of metals can significantly affect the spatial structure and size of MOF crystals. MOFs can be nano-, micro-, and meso-sized, dense and porous, bulk and layered. This all determines their wide range of properties and applications.Particular attention is paid to the prospects and ways to control and manipulate the shape of crystals, their size, and the spatial relationships between organic components with metal ions.This review focuses on zeolite-like frameworks (ZIFs) as the most interesting in terms of structure, synthesis, and applications in the field of materials for electrochemical current sources. Possibilities of modification and control of properties of these ZIFs and composite materials based on them by means of composition control, creation of porous structures, and introduction of impurities, including those with magnetic properties, are considered. Various variants of synthesis of complex composite materials by controlled pyrolysis of MOFs as a simple and scalable process are considered. The influence of heat treatment conditions on the final properties is demonstrated, as well as the prospects for the use of such materials in electrochemistry applications.As one of the options for changing the properties of MOFs and composite materials based on them, an approach based on doping of MOFs with ZIF-67 structure with another metal is presented. In particular, the scientific team of the authors realized the synthesis of cobalt MOFs in which Co is partially substituted by manganese at the synthesis stage. In addition, a simple technique of synthesis by coprecipitation in aqueous solution was used, but modified by ultrasonic action, which shortens the synthesis time. Electrochemical studies showed that the specific electrochemical capacitance of electrodes made of pyrolyzed MOFs with partial substitution of cobalt for manganese is significantly higher than that of materials without manganese. Both specific capacitance and energy density increase with increasing manganese content in MOF. Mn doping of MOF allows to significantly improve (from 100 to 298 F/g at current density of 0.25 A/g) the electrochemical characteristics of electrode materials for hybrid supercapacitors based on them. The results obtained by the authors indicate that the substitution of cobalt with manganese is an effective way to improve the electrochemical characteristics of MOFs.Thus, the article demonstrates by the example of literature review and practical experiment that the development of new approaches to the design of composite materials based on MOFs, as well as the study of physical and chemical regularities of interaction of these materials with various kinds of carriers is a very urgent task.

  • Open Access

    Simulation of the radio absorbing properties of pyrolyzed polyacrylonitrile in the frequency range from 3 to 50 GHz

    by D. P. Radchenko, I. V. Zaporotskova, L. V. Kozhitov, P. A. Zaporotskov, A. V. Popkova, V. G. Kosushkin

    Currently, the electromagnetic characteristics of various materials, including polymers, are being widely studied with the aim of using them as radio-absorbing coatings in electronics products. One such material is pyrolyzed polyacrylonitrile (PPAN). A model of electromagnetic wave absorption by PPAN layers with electrical conductivity of 72 and 180 S/m and a layer width of 0.15 to 2 mm, including those containing a metal filler (the so-called PPAN-based metal composite), in the frequency range of 3–50 GHz is considered. The simulation was performed in the COMSOL Multiphysics software package.A comparison of the experimental results with the data obtained during the simulation was carried out for such parameters as reflection, transmission and absorption. The conclusions obtained from the analysis of simulation data coincide with the results of practical experiments. Analysis of the model showed the convergence of modeling results with experimental data at a qualitative level.