Qikui Man
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Qikui Man has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Mingqiang Ning
Zhejiang Provincial Key Laboratory of Magnetic Materials and Applications, Ningbo Institute of Materials Technology and Engineering of the Chinese Academy of Sciences, Ningbo, Zhejiang 315201, China
6 shared publications Baogen Shen
Zhejiang Key Laboratory of Magnetic Materials and Applications, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, P. R. China
5 shared publicationsGuoguo Tan
CAS Key Laboratory of Magnetic Materials and Devices and Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, 1219 West Zhongguan Road, Zhenhai District, Ningbo 315201, P. R. China
5 shared publications- Xueheng Zhuang
Zhejiang Key Laboratory of Magnetic Materials and Applications, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, P. R. China
5 shared publications - Guoguo Tan
CAS Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, Zhejiang 315201, China
4 shared publications - Jiawei Li
Zhejiang Key Laboratory of Magnetic Materials and Applications, Ningbo Institute of Materials Technology & Engineering, Ningbo 315201, China
4 shared publications
Latest Publications
- Open Access
Multi-Layer Magnetic Shields Based on Fe-Based Nanocrystalline and Co-Based Amorphous Ribbons
We constructed a multi-layer composite magnetic shield composed of Fe-based nanocrystalline (FN) and Co-based amorphous (CA) ribbons, and focused on the influence of the number of layers and their arrangement on the shielding effectiveness (SE). Finite element analysis (FEA) and layer-by-layer inversion calculations were performed to analyze the attenuation process of the magnetic field between shield layers. Increasing the number of shield layers improves the maximum value of SE (SEmax) and significantly broadens the working range (WWR). In a weak magnetic field, CA exhibits higher shielding performance, whereas FN is better in a strong magnetic field. The FN/FN/CA combination (FN is closer to the field source) exhibits an SEmax of up to 51.7 dB within a WWR of 674.3 A/m, and demonstrates a 14.4% improvement in SE compared to FN/FN/FN combination across the entire tested magnetic field range. Finally, a gradient layering design is proposed that enables each layer to operate within its optimal permeability range, thereby improving the overall SE and broadening the effective working magnetic field range.
Open AccessMulti-Layer Magnetic Shields Based on Fe-Based Nanocrystalline and Co-Based Amorphous Ribbons
We constructed a multi-layer composite magnetic shield composed of Fe-based nanocrystalline (FN) and Co-based amorphous (CA) ribbons, and focused on the influence of the number of layers and their arrangement on the shielding effectiveness (SE). Finite element analysis (FEA) and layer-by-layer inversion calculations were performed to analyze the attenuation process of the magnetic field between shield layers. Increasing the number of shield layers improves the maximum value of SE (SEmax) and significantly broadens the working range (WWR). In a weak magnetic field, CA exhibits higher shielding performance, whereas FN is better in a strong magnetic field. The FN/FN/CA combination (FN is closer to the field source) exhibits an SEmax of up to 51.7 dB within a WWR of 674.3 A/m, and demonstrates a 14.4% improvement in SE compared to FN/FN/FN combination across the entire tested magnetic field range. Finally, a gradient layering design is proposed that enables each layer to operate within its optimal permeability range, thereby improving the overall SE and broadening the effective working magnetic field range.
- Open Access
- 7 May 2026
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 9 (4)
Bio-inspired microwave maze composite via additive manufacturing for robust and oblique-incidence broadband microwave absorption
To meet the growing demand for structurally integrated microwave absorbers that combine robust load-bearing capacity with broadband and oblique-incidence absorption, this work designs and fabricates a bio-inspired composite featuring a hierarchical porous architecture. Drawing inspiration from the fiber-reinforced, periodically arrayed microstructure of the weevil beetle shell, the triply periodic minimal surface (TPMS)-based topological structures are additively manufactured using short-cut carbon fiber-reinforced polyamide (SCF/PA). Among the TPMS architectures evaluated, the primitive shell-type structure was selected for its optimal balance of broadband absorption and mechanical robustness, achieving a reflection loss (RL) of − 59.65 dB at 13.23 GHz and an effective absorption bandwidth (EAB, RL ≤ − 10 dB) of 30.04 GHz at a thickness of 24.7 mm, in addition to a flexural strength of 13.81 ± 1.20 MPa. A sandwich composite was then fabricated by laminating glass fiber and carbon fiber fabrics onto the TPMS core. This composite exhibits a flexural strength of 34.16 ± 0.64 MPa with a density of 0.36 g/cm 3 , while maintaining an EAB of 30.92 GHz and an RL of − 36.61 dB at 12.78 GHz (25.72 mm). Under oblique incidence, it retains 75.6% of its normal-incidence bandwidth (23.38 GHz) for transverse electric (TE) polarization and 121.8% (37.67 GHz) for transverse magnetic (TM) polarization at an incident angle of 65°. This superior performance comes from the synergy of several factors: electric loss from the SCF reinforcement, the microwave maze effect (multiple reflections and extended propagation paths occur within the TPMS porous network), and optimized impedance matching enabled by the fabric layers. Overall, this bio-inspired, multi-scale design strategy offers a promising route toward integrating broadband, oblique-incidence microwave absorption with enhanced structural functionality in complex service environments.
- 7 May 2026
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 9 (4)
Open AccessBio-inspired microwave maze composite via additive manufacturing for robust and oblique-incidence broadband microwave absorption
To meet the growing demand for structurally integrated microwave absorbers that combine robust load-bearing capacity with broadband and oblique-incidence absorption, this work designs and fabricates a bio-inspired composite featuring a hierarchical porous architecture. Drawing inspiration from the fiber-reinforced, periodically arrayed microstructure of the weevil beetle shell, the triply periodic minimal surface (TPMS)-based topological structures are additively manufactured using short-cut carbon fiber-reinforced polyamide (SCF/PA). Among the TPMS architectures evaluated, the primitive shell-type structure was selected for its optimal balance of broadband absorption and mechanical robustness, achieving a reflection loss (RL) of − 59.65 dB at 13.23 GHz and an effective absorption bandwidth (EAB, RL ≤ − 10 dB) of 30.04 GHz at a thickness of 24.7 mm, in addition to a flexural strength of 13.81 ± 1.20 MPa. A sandwich composite was then fabricated by laminating glass fiber and carbon fiber fabrics onto the TPMS core. This composite exhibits a flexural strength of 34.16 ± 0.64 MPa with a density of 0.36 g/cm 3 , while maintaining an EAB of 30.92 GHz and an RL of − 36.61 dB at 12.78 GHz (25.72 mm). Under oblique incidence, it retains 75.6% of its normal-incidence bandwidth (23.38 GHz) for transverse electric (TE) polarization and 121.8% (37.67 GHz) for transverse magnetic (TM) polarization at an incident angle of 65°. This superior performance comes from the synergy of several factors: electric loss from the SCF reinforcement, the microwave maze effect (multiple reflections and extended propagation paths occur within the TPMS porous network), and optimized impedance matching enabled by the fabric layers. Overall, this bio-inspired, multi-scale design strategy offers a promising route toward integrating broadband, oblique-incidence microwave absorption with enhanced structural functionality in complex service environments.
- Open Access
Stray-Field Suppression in Motors with Amorphous Alloy Shields: A Combined Experimental and Numerical Investigation
External stray magnetic fields from permanent magnet synchronous motors (PMSMs) may cause electromagnetic interference to nearby equipment and limit their application in space-constrained systems. To address this issue, this paper investigates the use of laminated Co-based amorphous ribbon shields for stray-field suppression. An efficient equivalent modeling method is proposed for the simulation of such multilayer thin shielding structures, in which the laminated shield is replaced by an equivalent single-layer model while preserving its macroscopic shielding behavior. The method is first assessed in 2-D through comparisons between refined laminated and simplified equivalent models under both linear permeability and nonlinear magnetization-curve descriptions, and is then extended to 3-D PMSM shielding analysis under static and rotating no-load conditions with experimental validation. Results show that the 10-layer amorphous ribbon shield, with a total thickness of 420 μm, achieves a maximum shielding effectiveness of 7.9 dB at a measurement distance of two motor radii. The maximum deviation between simulation and experiment is 7.4%, and the equivalent model reduces computation time by 28% relative to the refined model. This method provides an accurate and efficient approach for the analysis and design of compact low-frequency magnetic shields for PMSMs.
Open AccessStray-Field Suppression in Motors with Amorphous Alloy Shields: A Combined Experimental and Numerical Investigation
External stray magnetic fields from permanent magnet synchronous motors (PMSMs) may cause electromagnetic interference to nearby equipment and limit their application in space-constrained systems. To address this issue, this paper investigates the use of laminated Co-based amorphous ribbon shields for stray-field suppression. An efficient equivalent modeling method is proposed for the simulation of such multilayer thin shielding structures, in which the laminated shield is replaced by an equivalent single-layer model while preserving its macroscopic shielding behavior. The method is first assessed in 2-D through comparisons between refined laminated and simplified equivalent models under both linear permeability and nonlinear magnetization-curve descriptions, and is then extended to 3-D PMSM shielding analysis under static and rotating no-load conditions with experimental validation. Results show that the 10-layer amorphous ribbon shield, with a total thickness of 420 μm, achieves a maximum shielding effectiveness of 7.9 dB at a measurement distance of two motor radii. The maximum deviation between simulation and experiment is 7.4%, and the equivalent model reduces computation time by 28% relative to the refined model. This method provides an accurate and efficient approach for the analysis and design of compact low-frequency magnetic shields for PMSMs.
- Open Access
Influence of Atomization Parameters on Sphericity and Soft Magnetic Properties of FeSiBNbCu Nanocrystalline Powders
Hybrid atomization represents a novel method for powder production with high cooling and crushing capacities, but previous studies have primarily focused on tin and aluminum alloy systems. In present study, FeSiBNbCu nanocrystalline powders were prepared using a hybrid atomization system and the effects of atomization parameters on the sphericity of the powders and soft magnetic properties of the nanocrystalline magnetic powder cores (NMPCs) were investigated. Orthogonal experiments reveal that atomization pressure is the most critical factor affecting powder size, while melting temperature primarily influences sphericity. By optimizing the atomization parameters, the nanocrystalline powders with a high sphericity of up to 91.2% can be achieved, and the core loss at 1 MHz@20 mT of the corresponding NMPCs is reduced by 59.2% to 464 mW/cm3. This study provides valuable guidance for the fabrication of Fe-based nanocrystalline powders with excellent soft magnetic properties via hybrid atomization.
Open AccessInfluence of Atomization Parameters on Sphericity and Soft Magnetic Properties of FeSiBNbCu Nanocrystalline Powders
Hybrid atomization represents a novel method for powder production with high cooling and crushing capacities, but previous studies have primarily focused on tin and aluminum alloy systems. In present study, FeSiBNbCu nanocrystalline powders were prepared using a hybrid atomization system and the effects of atomization parameters on the sphericity of the powders and soft magnetic properties of the nanocrystalline magnetic powder cores (NMPCs) were investigated. Orthogonal experiments reveal that atomization pressure is the most critical factor affecting powder size, while melting temperature primarily influences sphericity. By optimizing the atomization parameters, the nanocrystalline powders with a high sphericity of up to 91.2% can be achieved, and the core loss at 1 MHz@20 mT of the corresponding NMPCs is reduced by 59.2% to 464 mW/cm3. This study provides valuable guidance for the fabrication of Fe-based nanocrystalline powders with excellent soft magnetic properties via hybrid atomization.
- Open Access
Correlation of Viscosity, Precursor Structure, Nanocrystallized Structure with Soft Magnetic Properties in FeSiCuBNbAlPSn Alloys
The interplay between melting viscosity, amorphous forming ability (AFA), nanocrystalline structure, and soft magnetic properties (SMPs) in Fe-based multicomponent alloys remains unclear. This study systematically explores the effects of Sn doping on the viscosity, precursor structure, and nanocrystallization behavior of Fe-Si-B-Nb-Cu-Al-P alloys. Sn doping reduces melting viscosity and induces an abnormal viscosity rise during cooling, lowering the fragility parameter ratio (F) between high- and low-temperature zones, thereby enhancing the AFA of the precursor ribbons. High-temperature heat preservation treatment (HTP) of the melt further reduces the F, improves precursor disorder, and refines nanocrystals, leading to reduced average magnetocrystalline anisotropy and optimized SMPs. The HTP-treated Sn-dopped alloy shows superior SMPs, including low coercivity of 0.4 A/m and high permeability of 32,400 at 5 kHz, making it highly promising for advanced electromagnetic device applications. This work reveals the relationship between viscosity, precursor structure, nanocrystalline structure, and SMPs of Fe-based alloys, which provides an approach for the optimization of SMPs.
Open AccessCorrelation of Viscosity, Precursor Structure, Nanocrystallized Structure with Soft Magnetic Properties in FeSiCuBNbAlPSn Alloys
The interplay between melting viscosity, amorphous forming ability (AFA), nanocrystalline structure, and soft magnetic properties (SMPs) in Fe-based multicomponent alloys remains unclear. This study systematically explores the effects of Sn doping on the viscosity, precursor structure, and nanocrystallization behavior of Fe-Si-B-Nb-Cu-Al-P alloys. Sn doping reduces melting viscosity and induces an abnormal viscosity rise during cooling, lowering the fragility parameter ratio (F) between high- and low-temperature zones, thereby enhancing the AFA of the precursor ribbons. High-temperature heat preservation treatment (HTP) of the melt further reduces the F, improves precursor disorder, and refines nanocrystals, leading to reduced average magnetocrystalline anisotropy and optimized SMPs. The HTP-treated Sn-dopped alloy shows superior SMPs, including low coercivity of 0.4 A/m and high permeability of 32,400 at 5 kHz, making it highly promising for advanced electromagnetic device applications. This work reveals the relationship between viscosity, precursor structure, nanocrystalline structure, and SMPs of Fe-based alloys, which provides an approach for the optimization of SMPs.
- 23 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (1) , 601-611
Optimized Microwave Absorption and Structural Compression Sensing via Magnetic Fiber-Infused Aerogels with Reduced Graphene Oxide and Carbon Frameworks
- 23 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (1) , 601-611
Optimized Microwave Absorption and Structural Compression Sensing via Magnetic Fiber-Infused Aerogels with Reduced Graphene Oxide and Carbon Frameworks
- 8 February 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 484, 149422
Ordered heterostructured aerogel for multi-spectra stealth in microwave, infrared and visible light bands
- 8 February 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 484, 149422
Ordered heterostructured aerogel for multi-spectra stealth in microwave, infrared and visible light bands
- 27 October 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (43) , 23300-23310
Boosted interfacial charge dynamics on the SnO 2 /SnS 2 heterointerface by gradient sulfur diffusion for microwave absorption and electric–thermal conversion
The engineering of heterogeneous interfaces is an effective way to develop high-performance electromagnetic wave (EMW) absorbing materials. In this work, density functional theory (DFT) calculations were used to predict the SnO2/SnS2 heterointerface effect for boosting electromagnetic wave loss. Then a method for constructing SnO2/SnS2 heterostructures by modulating the SnO2 precursor on carbon cloth (CC) with controlled sulfurization is proposed. Benefiting from the introduction of SnO2/SnS2 heterostructures, the S-2 absorber achieves a minimum reflection loss (RLmin) of −50.9 dB and maximum EAB up to 4.18 GHz with a matching thickness of 5.0 mm and 1.5 mm. Moreover, the materials also exhibit strong hydrophobicity and high electrical conductivity, giving them potential applications such as self-cleaning, and good electrical and thermal properties. This study provides an insight into the mechanism of heterogeneous interfaces for enhancing the attenuation capability of EMW and opens avenues for developing high-performance absorbers.
- 27 October 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (43) , 23300-23310
Boosted interfacial charge dynamics on the SnO 2 /SnS 2 heterointerface by gradient sulfur diffusion for microwave absorption and electric–thermal conversion
The engineering of heterogeneous interfaces is an effective way to develop high-performance electromagnetic wave (EMW) absorbing materials. In this work, density functional theory (DFT) calculations were used to predict the SnO2/SnS2 heterointerface effect for boosting electromagnetic wave loss. Then a method for constructing SnO2/SnS2 heterostructures by modulating the SnO2 precursor on carbon cloth (CC) with controlled sulfurization is proposed. Benefiting from the introduction of SnO2/SnS2 heterostructures, the S-2 absorber achieves a minimum reflection loss (RLmin) of −50.9 dB and maximum EAB up to 4.18 GHz with a matching thickness of 5.0 mm and 1.5 mm. Moreover, the materials also exhibit strong hydrophobicity and high electrical conductivity, giving them potential applications such as self-cleaning, and good electrical and thermal properties. This study provides an insight into the mechanism of heterogeneous interfaces for enhancing the attenuation capability of EMW and opens avenues for developing high-performance absorbers.
- 20 September 2023
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 587, 171229
Effect of Mn substitution on structural, magnetic and microwave absorption properties of Co2Y hexagonal ferrite
- 20 September 2023
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 587, 171229
Effect of Mn substitution on structural, magnetic and microwave absorption properties of Co2Y hexagonal ferrite
- 20 April 2023
- Published by Elsevier in Materials Today Communications
- Vol. 35
Angular-dependent spin-wave modes observations and excitation origins in Yttrium iron garnet thin films
- 20 April 2023
- Published by Elsevier in Materials Today Communications
- Vol. 35
Angular-dependent spin-wave modes observations and excitation origins in Yttrium iron garnet thin films