Nazan Kocak Topbas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nazan Kocak Topbas has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Kıvanç Kamburoğlu
Ankara University
3 shared publications - Mehmet Özgür Özemre
Department of Dentomaxillofacial Radiology, Faculty of Dentistry, Mersin University, Mersin, Turkey
3 shared publications - Kaan Orhan
Department of Dentomaxillofacial Radiology, Faculty of Dentistry, Ankara University, Ankara 06560, Turkey
2 shared publications - A. Korkmaz
Department of Oral and Maxillofacial Radiology, Faculty of Dentistry, Mersin University, Mersin, Türkiye
1 shared publication - Alime Okkesim
Nevsehir Haci Bektas Veli Üniversitesi
1 shared publication - Ayse Tugba Erturk-Avunduk
Department of Restorative Dentistry, Faculty of Dentistry, Mersin University, Yenişehir, Mersin, Türkiye
1 shared publication
Latest Publications
- Open Access
- 7 October 2026
- Published by Springer Nature in BMC Oral Health
Effects of dental material-induced artifacts on signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) in CBCT: an ex vivo study
- 7 October 2026
- Published by Springer Nature in BMC Oral Health
Open AccessEffects of dental material-induced artifacts on signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) in CBCT: an ex vivo study
- Open Access
- 26 January 2026
- Published by Galenos Yayinevi in Archives of Basic and Clinical Research
- Vol. 8 (1)
Classification of Potential Risk Factors for Maxillary Sinus Membrane Perforation Using Cone-Beam Computed Tomography
Classification of Potential Risk Factors for Maxillary Sinus Membrane Perforation Using Cone-Beam Computed Tomography - Archives of Basic and Clinical Research
- 26 January 2026
- Published by Galenos Yayinevi in Archives of Basic and Clinical Research
- Vol. 8 (1)
Open AccessClassification of Potential Risk Factors for Maxillary Sinus Membrane Perforation Using Cone-Beam Computed Tomography
Classification of Potential Risk Factors for Maxillary Sinus Membrane Perforation Using Cone-Beam Computed Tomography - Archives of Basic and Clinical Research
- 17 July 2023
- Published by Ankara Dis Hekimleri Odasi in ADO Klinik Bilimler Dergisi
KONİK IŞINLI BİLGİSAYARLI TOMOGRAFİ GÖRÜNTÜLERİNDE RASTLANTISAL BULGULAR: BİR KESİTSEL ARAŞTIRMA
Amaç: Maksillofasiyal konik ışınlı bilgisayarlı tomografi görüntülerinde karşılaşılan rastlantısal bulguların yerini, tipini ve sıklığını geriye dönük olarak incelemektir. Gereç ve yöntem: Çalışmada, 2018-2021 yılları arasında sadece implant planlaması amacıyla alınmış konik ışınlı bilgisayarlı tomografi görüntüleri geriye dönük olarak rastlantısal bulgu varlığı açısından değerlendirilmiştir. Görüntüler, iki deneyimli dentomaksillofasiyal radyolog tarafından geriye dönük olarak incelenmiştir. Rastlantısal bulgular bulundukları bölgeye göre; hava yolu bulguları, gömülü diş-kök varlığı, temporomandibular eklem bulguları, endodontik lezyonlar, osteoskleroz ve yumuşak doku kalsifikasyonları olarak sınıflandırılmıştır. Bulgular: Çalışmada 109’u erkek 91’i kadın olan toplam 200 hastanın (yaş ortalaması 50,54 (36-68)) konik ışınlı bilgisayarlı tomografi görüntüleri incelendi. Rastlantısal bulguların dağılımı açısından cinsiyetler arasında anlamlı fark bulunamadı (p=0,857). Yaş ile rastlantısal bulguların gözlenmesi arasında korelasyon yoktu (p=0,525). Rastlantısal bulguların en çok görüldüğü bölge hava yolu olup ardından sırasıyla, gömülü diş ve artık kökler, TME bulguları, endodontik lezyon, osteoskleroz ve yumuşak doku kalsifikasyonları gelmektedir. Sonuç: Çalışmada değerlendirilen görüntülerin %88’inde rastlantısal bulgu gözlenmiş olup çalışmadaki hasta başına düşen rastlantısal bulgu sayısı 1,16 dır. Konik ışınlı bilgisayarlı tomografi görüntülerini değerlendiren dentomaksillofasiyal radyolog veya hekimlerin, tomografi istek endikasyonuna bağlı kalmaksızın görüntü alanına giren tüm yapıları detaylı olarak değerlendirmesi, takip/tedavi gerektirebilecek durumların teşhisi ve hastanın yönlendirilmesi açısından son derece önemlidir.
- 17 July 2023
- Published by Ankara Dis Hekimleri Odasi in ADO Klinik Bilimler Dergisi
KONİK IŞINLI BİLGİSAYARLI TOMOGRAFİ GÖRÜNTÜLERİNDE RASTLANTISAL BULGULAR: BİR KESİTSEL ARAŞTIRMA
Amaç: Maksillofasiyal konik ışınlı bilgisayarlı tomografi görüntülerinde karşılaşılan rastlantısal bulguların yerini, tipini ve sıklığını geriye dönük olarak incelemektir. Gereç ve yöntem: Çalışmada, 2018-2021 yılları arasında sadece implant planlaması amacıyla alınmış konik ışınlı bilgisayarlı tomografi görüntüleri geriye dönük olarak rastlantısal bulgu varlığı açısından değerlendirilmiştir. Görüntüler, iki deneyimli dentomaksillofasiyal radyolog tarafından geriye dönük olarak incelenmiştir. Rastlantısal bulgular bulundukları bölgeye göre; hava yolu bulguları, gömülü diş-kök varlığı, temporomandibular eklem bulguları, endodontik lezyonlar, osteoskleroz ve yumuşak doku kalsifikasyonları olarak sınıflandırılmıştır. Bulgular: Çalışmada 109’u erkek 91’i kadın olan toplam 200 hastanın (yaş ortalaması 50,54 (36-68)) konik ışınlı bilgisayarlı tomografi görüntüleri incelendi. Rastlantısal bulguların dağılımı açısından cinsiyetler arasında anlamlı fark bulunamadı (p=0,857). Yaş ile rastlantısal bulguların gözlenmesi arasında korelasyon yoktu (p=0,525). Rastlantısal bulguların en çok görüldüğü bölge hava yolu olup ardından sırasıyla, gömülü diş ve artık kökler, TME bulguları, endodontik lezyon, osteoskleroz ve yumuşak doku kalsifikasyonları gelmektedir. Sonuç: Çalışmada değerlendirilen görüntülerin %88’inde rastlantısal bulgu gözlenmiş olup çalışmadaki hasta başına düşen rastlantısal bulgu sayısı 1,16 dır. Konik ışınlı bilgisayarlı tomografi görüntülerini değerlendiren dentomaksillofasiyal radyolog veya hekimlerin, tomografi istek endikasyonuna bağlı kalmaksızın görüntü alanına giren tüm yapıları detaylı olarak değerlendirmesi, takip/tedavi gerektirebilecek durumların teşhisi ve hastanın yönlendirilmesi açısından son derece önemlidir.
- Open Access
- 12 January 2023
- Published by MDPI AG in Diagnostics
- Vol. 13 (2) , 284
Clinical Performance of Diagnostic Methods in Third Molar Teeth with Early Occlusal Caries
The aim of this study was to compare the diagnostic performance of clinical visual examination (ICDAS II), digital periapical radiography (PR), near infrared light transillumination (NIR-LT), and laser fluorescence (LF) to microcomputed tomography (Micro-CT) which is the reference standard for the detection of non-cavitated occlusal enamel and dentin caries in third molar teeth. Potential participants were consecutively recruited. In this prospective study, 101 third molars of 101 patients were examined; the molars had non-cavitated occlusal caries which required extraction. ICDAS II, PR, NIR-LT and LF examinations were carried out by two blinded examiners. Reference standard was determined by micro-CT imaging seven days after extraction. Accuracy rate, sensitivity, specificity, predictive values and areas under receiver operating characteristic (ROC) curves (Az) were statistically analyzed. Nonparametric variables were subjected to the Kruskal–Wallis Test. Significance level was set as p < 0.05. NIR-LT had the highest sensitivity (99.67–99.67%) and accuracy (78.22–77.23%) for the determination of occlusal enamel caries according to examiners 1 and 2, respectively. LF method had the highest sensitivity (70.83–54.17%) and accuracy (66.34–59.41%) for determining occlusal dentin caries according to examiners 1 and 2, respectively. The ROC curve (Az) value ranged between 0.524 and 0.726 for the different methods tested. Most effective methods for the diagnosis of occlusal enamel and dentin caries were determined to be NIR-LT and LF pen methods, respectively. The present prospective clinical study showed that NIR-LT and LF-Pen were a reliable modality for the detection of occlusal enamel and dentin caries without ionizing radiation.
- 12 January 2023
- Published by MDPI AG in Diagnostics
- Vol. 13 (2) , 284
Open AccessClinical Performance of Diagnostic Methods in Third Molar Teeth with Early Occlusal Caries
The aim of this study was to compare the diagnostic performance of clinical visual examination (ICDAS II), digital periapical radiography (PR), near infrared light transillumination (NIR-LT), and laser fluorescence (LF) to microcomputed tomography (Micro-CT) which is the reference standard for the detection of non-cavitated occlusal enamel and dentin caries in third molar teeth. Potential participants were consecutively recruited. In this prospective study, 101 third molars of 101 patients were examined; the molars had non-cavitated occlusal caries which required extraction. ICDAS II, PR, NIR-LT and LF examinations were carried out by two blinded examiners. Reference standard was determined by micro-CT imaging seven days after extraction. Accuracy rate, sensitivity, specificity, predictive values and areas under receiver operating characteristic (ROC) curves (Az) were statistically analyzed. Nonparametric variables were subjected to the Kruskal–Wallis Test. Significance level was set as p < 0.05. NIR-LT had the highest sensitivity (99.67–99.67%) and accuracy (78.22–77.23%) for the determination of occlusal enamel caries according to examiners 1 and 2, respectively. LF method had the highest sensitivity (70.83–54.17%) and accuracy (66.34–59.41%) for determining occlusal dentin caries according to examiners 1 and 2, respectively. The ROC curve (Az) value ranged between 0.524 and 0.726 for the different methods tested. Most effective methods for the diagnosis of occlusal enamel and dentin caries were determined to be NIR-LT and LF pen methods, respectively. The present prospective clinical study showed that NIR-LT and LF-Pen were a reliable modality for the detection of occlusal enamel and dentin caries without ionizing radiation.
- Open Access
- 24 January 2022
- Published by Mersin Universitesi Tip Fakultesi Lokman Hekim Tip Tarihi ve Folklorik Tip Dergisi in Mersin Üniversitesi Tıp Fakültesi Lokman Hekim Tıp Tarihi ve Folklorik Tıp Dergisi
- Vol. 12 (1) , 170-178
Relationship of the Presence of Lingual Concavity and Mandibular Canal Location: A Retrospective Two-Center Study
Aim: To evaluate the possible relationship between the position of the mandibular canal (MC) on digital panoramic images (PI) and the presence of a lingual concavity (LC) on Cone-Beam Computed Tomography (CBCT) scans in two different populations.Materials and methods: In this retrospective study, the digital archives of a private imaging center in Turkey and at The Academic Center for Dentistry Amsterdam (ACTA) in Netherlands patients who had both panoramic and CBCT images, taken between January 2016 and June 2016 due to various indications. A total of 248 patients were assessed. MC position was defined on digital panoramic radiographs; the presence of LC was assessed on CBCT images. In all statistical methods, p value <0.05 was considered statistically significant. The Mc Nemar test and the receiver operating characteristics (ROC) curve analysis (AZ), were performed for data analysis.Results: Considering all patients, the presence of LC was 28% and 31% for the left and right premolar regions and 75% and 77% for the left and right molar regions, respectively. There was no significant difference between right and left sides and between the Turkish and Dutch populations with respect to the presence of LC. Considering all patients, the presence of a LC was higher in the molar region than in the premolar region for both right and left sides with a statistical significance (p<0.001). Conclusions: The higher percentages of LC in the molar region in both populations suggests that a preoperative local CBCT assessment is justified specifically before implant placement in the mandibular molar region. The location of the MC on the PI was not a very strong indication of the presence of a LC.
- 24 January 2022
- Published by Mersin Universitesi Tip Fakultesi Lokman Hekim Tip Tarihi ve Folklorik Tip Dergisi in Mersin Üniversitesi Tıp Fakültesi Lokman Hekim Tıp Tarihi ve Folklorik Tıp Dergisi
- Vol. 12 (1) , 170-178
Open AccessRelationship of the Presence of Lingual Concavity and Mandibular Canal Location: A Retrospective Two-Center Study
Aim: To evaluate the possible relationship between the position of the mandibular canal (MC) on digital panoramic images (PI) and the presence of a lingual concavity (LC) on Cone-Beam Computed Tomography (CBCT) scans in two different populations.Materials and methods: In this retrospective study, the digital archives of a private imaging center in Turkey and at The Academic Center for Dentistry Amsterdam (ACTA) in Netherlands patients who had both panoramic and CBCT images, taken between January 2016 and June 2016 due to various indications. A total of 248 patients were assessed. MC position was defined on digital panoramic radiographs; the presence of LC was assessed on CBCT images. In all statistical methods, p value <0.05 was considered statistically significant. The Mc Nemar test and the receiver operating characteristics (ROC) curve analysis (AZ), were performed for data analysis.Results: Considering all patients, the presence of LC was 28% and 31% for the left and right premolar regions and 75% and 77% for the left and right molar regions, respectively. There was no significant difference between right and left sides and between the Turkish and Dutch populations with respect to the presence of LC. Considering all patients, the presence of a LC was higher in the molar region than in the premolar region for both right and left sides with a statistical significance (p<0.001). Conclusions: The higher percentages of LC in the molar region in both populations suggests that a preoperative local CBCT assessment is justified specifically before implant placement in the mandibular molar region. The location of the MC on the PI was not a very strong indication of the presence of a LC.
- Open Access
- 26 October 2021
- Published by Walter de Gruyter GmbH in Turkish Journal of Biochemistry
- Vol. 46 (6) , 721-727
Association of bitter and sweet taste gene receptor polymorphisms with dental caries formation
Objectives: The aim of the study is to analyze the association of different bitter and sweet gene receptor polymorphisms and bitter and sweet food consumption on formation of dental caries in Turkish adult population. Methods: This study included 205 adults whose detailed intraoral health examination was completed and decayed, missing, filled teeth (DMFT) index values were recorded. A mini questionnaire was applied to assess the consumption of bitter and sweet food. A venous blood sample from each participant was collected in Ethylenediamine tetraacetic acid (EDTA) tubes. Further, DNA samples were isolated from the blood samples by utilizing a DNA isolation kit, which were stored at +4 °C prior to the analysis. Taste receptor type 2 member 38 ( TAS2R38 ; rs10246939, rs713598, rs1726866), Taste receptor type 1 member 2 ( TAS1R2 ; rs35874116, rs9701796), and Taste receptor type 1 member 3 ( TAS1R3 ; rs307355) gene polymorphisms were detected using real-time polymerase chain reaction (PCR). Results: There was no statistically significant association between the TAS2R38 , TAS1R2 , and TAS1R3 gene polymorphism and the DMFT index (p>0.05). No significant difference was found between the consumption of bitter and sweet food and the DMFT index (p>0.05). Conclusions: TAS2R38 (rs10246939, rs713598, rs1726866), TAS1R2 (rs35874116, rs9701796), and TAS1R3 (rs307355) gene polymorphism may not be associated with the formation of dental caries in the Turkish adult population.
- 26 October 2021
- Published by Walter de Gruyter GmbH in Turkish Journal of Biochemistry
- Vol. 46 (6) , 721-727
Open AccessAssociation of bitter and sweet taste gene receptor polymorphisms with dental caries formation
Objectives: The aim of the study is to analyze the association of different bitter and sweet gene receptor polymorphisms and bitter and sweet food consumption on formation of dental caries in Turkish adult population. Methods: This study included 205 adults whose detailed intraoral health examination was completed and decayed, missing, filled teeth (DMFT) index values were recorded. A mini questionnaire was applied to assess the consumption of bitter and sweet food. A venous blood sample from each participant was collected in Ethylenediamine tetraacetic acid (EDTA) tubes. Further, DNA samples were isolated from the blood samples by utilizing a DNA isolation kit, which were stored at +4 °C prior to the analysis. Taste receptor type 2 member 38 ( TAS2R38 ; rs10246939, rs713598, rs1726866), Taste receptor type 1 member 2 ( TAS1R2 ; rs35874116, rs9701796), and Taste receptor type 1 member 3 ( TAS1R3 ; rs307355) gene polymorphisms were detected using real-time polymerase chain reaction (PCR). Results: There was no statistically significant association between the TAS2R38 , TAS1R2 , and TAS1R3 gene polymorphism and the DMFT index (p>0.05). No significant difference was found between the consumption of bitter and sweet food and the DMFT index (p>0.05). Conclusions: TAS2R38 (rs10246939, rs713598, rs1726866), TAS1R2 (rs35874116, rs9701796), and TAS1R3 (rs307355) gene polymorphism may not be associated with the formation of dental caries in the Turkish adult population.
- Open Access
- 22 September 2021
- Published by Mersin Universitesi Tip Fakultesi Lokman Hekim Tip Tarihi ve Folklorik Tip Dergisi in Mersin Üniversitesi Tıp Fakültesi Lokman Hekim Tıp Tarihi ve Folklorik Tıp Dergisi
- Vol. 11 (3) , 576-587
Usability of first molar teeth measurements for age and sex estimation in cone-beam computed tomography images
Amaç: Yaşlanmaya bağlı olarak diş yapısında meydana gelen morfolojik değişiklikler erişkin dönemde önem kazanmaktadır. Bu yaşa bağlı değişiklikler yaş ve cinsiyeti belirlemek için kullanılabilir. Konik ışınlı bilgisayarlı tomografi (KIBT) ile elde edilen birinci molar diş ölçümlerinin Türk çalışma grubunda kronolojik yaş ve cinsiyet tahmininde kullanılabilirliğini belirlemek bu çalışmanın amacıdır. Gereç ve yöntem: Kronolojik yaşı ve cinsiyeti bilinen 12 yaşından büyük 332 hastanın KIBT görüntüleri iki gözlemci tarafından ayrı ayrı yapılan yarı otomatik bölümleme ile değerlendirildi. Her hastada maksiller veya mandibular molar dişten pulpa hacmi ve diş hacmi ölçüldü. Ölçümleri kullanarak yaş ve cinsiyeti tahmin etmek için basit doğrusal regresyon analizi ve diskriminant fonksiyon analizi yapıldı. Ayrıca cinsiyet ve diş pozisyonuna göre ölçümleri karşılaştırmak için bağımsız örneklem t testi kullanıldı. Bulgular: Cinsiyet, kadınların %76.6'sında ve erkeklerin %56.3'ünde maksiller birinci molar hacim oranı ile tahmin edilmiştir. Pulpa/diş hacmi oranı (PDHO) ile yaş tahmini (YT), erkeklerde ve maksiller birinci molarlarda daha etkili sonuçlar vermiştir. Sonuç: Bu çalışmada maksiller birinci molar dişlerin hacim oranının erkeklerde yaş tahmininde, kadınlarda cinsiyet tahmininde (CT) daha doğru sonuçlar verdiği bulundu. Aim: The morphological changes in tooth structure due to aging gain importance in the adult period. These age-related changes can be used to determine age and sex. The aim of this study was to determine the usability of first molar tooth measurements obtained by cone beam computed tomography (CBCT) in estimating chronological age and sex in Turkish study group. Materials and methods: Three-dimensional images of 332 patients older than 12 years of age with known chronological age and sex were evaluated by semi-automatic segmentation performed separately by two observers. Pulp volume and tooth volume were measured from maxillary or mandibular molar tooth in each patient. Simple linear regression analysis and discriminant function analysis were performed to estimate age and sex using the measurements. In addition, independent sample t-test was used to compare the measurements according to sex and tooth position. Results: Sex was estimated by maxillary first molar volume ratio in 76.6% of women and 56.3% of men. Age estimation (AE) with pulp/tooth volume ratio (PTVR) gave more effective results in males and maxillary first molars. Conclusions: In this study, it was found that maxillary first molar volume ratio gave more accurate results in males AE and in females’ sex estimation (SE).
- 22 September 2021
- Published by Mersin Universitesi Tip Fakultesi Lokman Hekim Tip Tarihi ve Folklorik Tip Dergisi in Mersin Üniversitesi Tıp Fakültesi Lokman Hekim Tıp Tarihi ve Folklorik Tıp Dergisi
- Vol. 11 (3) , 576-587
Open AccessUsability of first molar teeth measurements for age and sex estimation in cone-beam computed tomography images
Amaç: Yaşlanmaya bağlı olarak diş yapısında meydana gelen morfolojik değişiklikler erişkin dönemde önem kazanmaktadır. Bu yaşa bağlı değişiklikler yaş ve cinsiyeti belirlemek için kullanılabilir. Konik ışınlı bilgisayarlı tomografi (KIBT) ile elde edilen birinci molar diş ölçümlerinin Türk çalışma grubunda kronolojik yaş ve cinsiyet tahmininde kullanılabilirliğini belirlemek bu çalışmanın amacıdır. Gereç ve yöntem: Kronolojik yaşı ve cinsiyeti bilinen 12 yaşından büyük 332 hastanın KIBT görüntüleri iki gözlemci tarafından ayrı ayrı yapılan yarı otomatik bölümleme ile değerlendirildi. Her hastada maksiller veya mandibular molar dişten pulpa hacmi ve diş hacmi ölçüldü. Ölçümleri kullanarak yaş ve cinsiyeti tahmin etmek için basit doğrusal regresyon analizi ve diskriminant fonksiyon analizi yapıldı. Ayrıca cinsiyet ve diş pozisyonuna göre ölçümleri karşılaştırmak için bağımsız örneklem t testi kullanıldı. Bulgular: Cinsiyet, kadınların %76.6'sında ve erkeklerin %56.3'ünde maksiller birinci molar hacim oranı ile tahmin edilmiştir. Pulpa/diş hacmi oranı (PDHO) ile yaş tahmini (YT), erkeklerde ve maksiller birinci molarlarda daha etkili sonuçlar vermiştir. Sonuç: Bu çalışmada maksiller birinci molar dişlerin hacim oranının erkeklerde yaş tahmininde, kadınlarda cinsiyet tahmininde (CT) daha doğru sonuçlar verdiği bulundu. Aim: The morphological changes in tooth structure due to aging gain importance in the adult period. These age-related changes can be used to determine age and sex. The aim of this study was to determine the usability of first molar tooth measurements obtained by cone beam computed tomography (CBCT) in estimating chronological age and sex in Turkish study group. Materials and methods: Three-dimensional images of 332 patients older than 12 years of age with known chronological age and sex were evaluated by semi-automatic segmentation performed separately by two observers. Pulp volume and tooth volume were measured from maxillary or mandibular molar tooth in each patient. Simple linear regression analysis and discriminant function analysis were performed to estimate age and sex using the measurements. In addition, independent sample t-test was used to compare the measurements according to sex and tooth position. Results: Sex was estimated by maxillary first molar volume ratio in 76.6% of women and 56.3% of men. Age estimation (AE) with pulp/tooth volume ratio (PTVR) gave more effective results in males and maxillary first molars. Conclusions: In this study, it was found that maxillary first molar volume ratio gave more accurate results in males AE and in females’ sex estimation (SE).
- 1 January 2021
- Published by Adnan Menderes University in Meandros Medical and Dental Journal
- Vol. 22 (1) , 50-61
Evaluation of Maxillary Sinus Width and Lateral Wall Thickness Using Cone-Beam Computed Tomography
- 1 January 2021
- Published by Adnan Menderes University in Meandros Medical and Dental Journal
- Vol. 22 (1) , 50-61
Evaluation of Maxillary Sinus Width and Lateral Wall Thickness Using Cone-Beam Computed Tomography
- 24 April 2020
- Published by Springer Nature in Lasers in Medical Science
- Vol. 35 (7) , 1621-1628
Clinical performance of clinical-visual examination, digital bitewing radiography, laser fluorescence, and near-infrared light transillumination for detection of non-cavitated proximal enamel and dentin caries
The aim of this study was to compare the clinical performance of clinical-visual examination using the International Caries Detection and Assessment System (ICDAS) II, digital bitewing radiography, near-infrared light transillumination (NIR-LT), and laser fluorescence (LF) for the detection of non-cavitated proximal enamel and dentin caries. The study included 335 patients, aged 12–18 years, with no cavities in the posterior teeth. Clinical-visual inspections of 335 non-cavitated proximal caries were performed by two examiners. For enamel caries, clinical validation included a combination of clinical-visual and digital bitewing radiography assessments. For dentin caries, the clinical validation was opening the cavity. The accuracy rate, sensitivity, specificity, predictive values, and areas under receiver operating characteristic curves were determined. The agreement between the examiners’ measurements was calculated using the kappa coefficient. The sensitivity, specificity, and accuracy of the methods were compared using the McNemar test. The significance level was set at p < 0.05. Digital bitewing radiography had the highest sensitivity (0.96) and accuracy (0.96), and LF had the lowest sensitivity (0.38) and accuracy (0.39). After separation of the lesions into enamel and dentin caries, clinical-visual examination had the highest sensitivity (0.98) and accuracy (0.98) for enamel caries, while digital bitewing radiography had the highest sensitivity (0.97) and accuracy (0.97) for dentin caries. The NIR-LT method had a higher sensitivity for enamel caries (0.86). Each method also differed significantly from the others (p < 0.001). Digital bitewing radiography gave the best prediction of proximal enamel and dentin caries. NIR-LT showed good potential for detection of proximal caries.
- 24 April 2020
- Published by Springer Nature in Lasers in Medical Science
- Vol. 35 (7) , 1621-1628
Clinical performance of clinical-visual examination, digital bitewing radiography, laser fluorescence, and near-infrared light transillumination for detection of non-cavitated proximal enamel and dentin caries
The aim of this study was to compare the clinical performance of clinical-visual examination using the International Caries Detection and Assessment System (ICDAS) II, digital bitewing radiography, near-infrared light transillumination (NIR-LT), and laser fluorescence (LF) for the detection of non-cavitated proximal enamel and dentin caries. The study included 335 patients, aged 12–18 years, with no cavities in the posterior teeth. Clinical-visual inspections of 335 non-cavitated proximal caries were performed by two examiners. For enamel caries, clinical validation included a combination of clinical-visual and digital bitewing radiography assessments. For dentin caries, the clinical validation was opening the cavity. The accuracy rate, sensitivity, specificity, predictive values, and areas under receiver operating characteristic curves were determined. The agreement between the examiners’ measurements was calculated using the kappa coefficient. The sensitivity, specificity, and accuracy of the methods were compared using the McNemar test. The significance level was set at p < 0.05. Digital bitewing radiography had the highest sensitivity (0.96) and accuracy (0.96), and LF had the lowest sensitivity (0.38) and accuracy (0.39). After separation of the lesions into enamel and dentin caries, clinical-visual examination had the highest sensitivity (0.98) and accuracy (0.98) for enamel caries, while digital bitewing radiography had the highest sensitivity (0.97) and accuracy (0.97) for dentin caries. The NIR-LT method had a higher sensitivity for enamel caries (0.86). Each method also differed significantly from the others (p < 0.001). Digital bitewing radiography gave the best prediction of proximal enamel and dentin caries. NIR-LT showed good potential for detection of proximal caries.