Hajime Nagata
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hajime Nagata has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
Yuka Takagi
Faculty of Science and Technology, Department of Electrical Engineering, Tokyo University of Science
3 shared publicationsSeiji Harada
Faculty of Science and Technology, Department of Electrical Engineering, Tokyo University of Science
2 shared publicationsTadashi Takenaka
Faculty of Science and Technology, Department of Electrical Engineering, Tokyo University of Science, Yamazaki 2641, Noda, Chiba-ken, 278-8510, Japan
2 shared publications- Yasuhiro Yoneda
Japan Atomic Energy Agency (JAEA)
1 shared publication
Latest Publications
- Open Access
- 1 July 2023
- Published by Ceramic Society of Japan in Journal of the Ceramic Society of Japan
- Vol. 131 (7) , 202-208
Reactivity and electrical properties of (Bi0.5Na0.5)TiO3 ceramics fabricated by hydrothermal synthesis using Bi and Ti oxides
Fine and homogeneous ceramic powders of bismuth sodium titanate, (Bi0.5Na0.5)TiO3 (BNT), were prepared via a hydrothermal synthesis process by using the Bi2O3 and TiO2 as starting raw materials. In particularly, hydrothermal conditions such as hydrothermal temperature, time and NaOH-aq concentration were controlled and optimized to obtain the fine and homogeneous BNT particles with single perovskite structure. Then, the appropriate hydrothermal conditions were optimized and obtained as NaOH-aq concentration of 12 M, and 240 °C for 24 h in hydrothermal process. Synthesized BNT powders under these conditions shows a single perovskite structure and have uniform spherical shape with the fine particle size of 200 nm in diameter. By using those hydrothermal BNT powders, dense BNT ceramics with more than 95 % of relative density could be obtained after the sintering at 1050 °C for 2 h. Then, the BNT ceramic shows a homogeneous microstructure with 2.8 µm of the grain size from the SEM observation. An electromechanical coupling coefficient k33 = 0.44 and piezoelectric constant d33 = 83 pC/N were calculated from the resonance and anti-resonance method on the BNT ceramic synthesized by the hydrothermal process and sintered at 1050 °C for 2 h. These values are almost comparable with the k33 and d33 values on the conventional BNT ceramics by the dry process sintered at 1140 °C for 2 h.
- 1 July 2023
- Published by Ceramic Society of Japan in Journal of the Ceramic Society of Japan
- Vol. 131 (7) , 202-208
Open AccessReactivity and electrical properties of (Bi0.5Na0.5)TiO3 ceramics fabricated by hydrothermal synthesis using Bi and Ti oxides
Fine and homogeneous ceramic powders of bismuth sodium titanate, (Bi0.5Na0.5)TiO3 (BNT), were prepared via a hydrothermal synthesis process by using the Bi2O3 and TiO2 as starting raw materials. In particularly, hydrothermal conditions such as hydrothermal temperature, time and NaOH-aq concentration were controlled and optimized to obtain the fine and homogeneous BNT particles with single perovskite structure. Then, the appropriate hydrothermal conditions were optimized and obtained as NaOH-aq concentration of 12 M, and 240 °C for 24 h in hydrothermal process. Synthesized BNT powders under these conditions shows a single perovskite structure and have uniform spherical shape with the fine particle size of 200 nm in diameter. By using those hydrothermal BNT powders, dense BNT ceramics with more than 95 % of relative density could be obtained after the sintering at 1050 °C for 2 h. Then, the BNT ceramic shows a homogeneous microstructure with 2.8 µm of the grain size from the SEM observation. An electromechanical coupling coefficient k33 = 0.44 and piezoelectric constant d33 = 83 pC/N were calculated from the resonance and anti-resonance method on the BNT ceramic synthesized by the hydrothermal process and sintered at 1050 °C for 2 h. These values are almost comparable with the k33 and d33 values on the conventional BNT ceramics by the dry process sintered at 1140 °C for 2 h.
- 27 January 2021
- Published by Springer Nature in Journal of Materials Research
- Vol. 36 (5) , 1097-1104
Quenching effects on electrical properties of Cu-doped (Bi1/2Na1/2)TiO3-based solid solution ceramics
- 27 January 2021
- Published by Springer Nature in Journal of Materials Research
- Vol. 36 (5) , 1097-1104
Quenching effects on electrical properties of Cu-doped (Bi1/2Na1/2)TiO3-based solid solution ceramics
- Open Access
- 5 May 2020
- Published by IOP Publishing in Applied Physics Express
- Vol. 13 (6) , 061002
Correlation between depolarization temperature and lattice distortion in quenched (Bi1/2Na1/2)TiO3-based ceramics
(Bi1/2Na1/2)TiO3 (BNT) is one of the candidates for lead-free piezoelectric ceramics. Recently, we found that the depolarization temperature T d of BNT could be increased by approximately 40 °C–80 °C with a quenching treatment after the sintering. To elucidate the mechanism, high-energy synchrotron X-ray powder diffraction data were collected in SPring-8 to analyze their crystal structures in detail. In the case of a quenched BNT-based sample, Bi ions displaced more to the off-center position of the A-site in a perovskite structure with a more ordered structure. The increase in rhombohedral distortion then affects the T d elevation in the quenched sample.
- 5 May 2020
- Published by IOP Publishing in Applied Physics Express
- Vol. 13 (6) , 061002
Open AccessCorrelation between depolarization temperature and lattice distortion in quenched (Bi1/2Na1/2)TiO3-based ceramics
(Bi1/2Na1/2)TiO3 (BNT) is one of the candidates for lead-free piezoelectric ceramics. Recently, we found that the depolarization temperature T d of BNT could be increased by approximately 40 °C–80 °C with a quenching treatment after the sintering. To elucidate the mechanism, high-energy synchrotron X-ray powder diffraction data were collected in SPring-8 to analyze their crystal structures in detail. In the case of a quenched BNT-based sample, Bi ions displaced more to the off-center position of the A-site in a perovskite structure with a more ordered structure. The increase in rhombohedral distortion then affects the T d elevation in the quenched sample.