SRStephen M. Remias

Stephen M. Remias

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Stephen M. Remias has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Utilizing Low-Ping Frequency Vehicle Trajectory Data to Characterize Delay at Traffic Signals

    by Jonathan M. Waddell, Stephen M. Remias, Jenna N. Kirsch, Ted Trepanier

    Probe vehicle data is changing the landscape of transportation engineering. The availability of vehicle trajectory data, or GPS waypoint data, has expanded the utility of probe data. However, the low penetration rate of vehicles prevents signal-performance assessment during short-term or low-volume periods, such as special events, seasonal traffic patterns, and overnight timing plans. Current research has used high-ping frequency data or the temporal distributions of waypoints of less than 2 s. This paper evaluates different approaches for using low-ping frequency data to measure delays at signalized intersections. The results of statistical testing show that 30- and 60-s ping data provide delay values that are not significantly different from 1-s ping data. These sampling frequencies increase the number of observable trajectories by 700%. This data allows for scalable approaches to immediately measure delays at signalized intersections nationwide in the US, thereby reducing costly infrastructure needed for signalized performance measures.


  • Characterizing Traffic-Signal Performance and Corridor Reliability Using Crowd-Sourced Probe Vehicle Trajectories

    by Jonathan M. Waddell, Stephen M. Remias, Jenna N. Kirsch

    Performance measures offer an essential management tool for transportation engineers to make decisions along signalized corridors. Current signal performance strategies assess coordination of a corridor using intersection-level metrics while relying on expensive infrastructure to measure vehicle arrivals. Recent crowd-sourced data collection strategies have allowed for the ubiquitous collection of individual vehicle waypoints. These trajectories can be used to replicate existing signal performance measures and improve upon current practices. This paper uses trajectory data from numerous corridors around the state of Michigan to illustrate the merit and versatility of crowd-sourced probe vehicle trajectory-based performance measures. Findings from this paper show that some current automated traffic-signal performance measures (ATSPMs), such as percent arrival on green and delay quantification, can be replicated using low-penetration-rate vehicle trajectory data. Also, the reliability-based performance metric, level of travel time reliability (LOTTR), can be improved using trajectories of vehicles known to travel the complete corridor instead of aggregating segmented probe vehicle data.


  • Evaluation of Interstate Work Zone Mobility using Probe Vehicle Data and Machine Learning Techniques

    by Mohsen Kamyab, Stephen Remias, Erfan Najmi, Kerrick Hood, Mustafa Al-Akshar, Ilyas Ustun

    According to the Federal Highway Administration (FHWA), US work zones on freeways account for nearly 24% of nonrecurring freeway delays and 10% of overall congestion. Historically, there have been limited scalable datasets to investigate the specific causes of congestion due to work zones or to improve work zone planning processes to characterize the impact of work zone congestion. In recent years, third-party data vendors have provided scalable speed data from Global Positioning System (GPS) devices and cell phones which can be used to characterize mobility on all roadways. Each work zone has unique characteristics and varying mobility impacts which are predicted during the planning and design phases, but can realistically be quite different from what is ultimately experienced by the traveling public. This paper uses these datasets to introduce a scalable Work Zone Mobility Audit (WZMA) template. Additionally, the paper uses metrics developed for individual work zones to characterize the impact of more than 250 work zones varying in length and duration from Southeast Michigan. The authors make recommendations to work zone engineers on useful data to collect for improving the WZMA. As more systematic work zone data are collected, improved analytical assessment techniques, such as machine learning processes, can be used to identify the factors that will predict future work zone impacts. The paper concludes by demonstrating two machine learning algorithms, Random Forest and XGBoost, which show historical speed variation is a critical component when predicting the mobility impact of work zones.


  • Evaluating the Performance of Coordinated Signal Timing: Comparison of Common Data Types with Automated Vehicle Location Data

    by Stephen M. Remias, Christopher M. Day, Jonathan M. Waddell, Jenna N. Kirsch, Ted Trepanier

    Performance measures are essential for managing transportation systems, including signalized corridors. Coordination is an essential element of signal timing, enabling reliable progression of traffic along corridors. Improved progression leads to less user delay, which leads to user cost savings and lower vehicle emissions. This paper presents a comparative study of signal coordination assessment using four different technologies. These technologies include detector-based high-resolution controller data, Bluetooth/Wi-Fi sensors, segment-based probe vehicle data, and automated vehicle location data consisting of GPS-based vehicle trajectories, representing the data anticipated from emerging connected vehicle technologies. The data were compiled for a 4.2-mi corridor in Holland, Michigan. The results show that all of the data sources were able to identify, at some level, where coordination issues existed. Detector-based controller data and GPS-based vehicle trajectory data were capable of showing greater detail, and could be used to make offset adjustments. The paper concludes by demonstrating the identification of signal coordination issues with the use of visual performance metrics incorporating automated vehicle location (AVL) trajectory data.


  • Variable Speed Limit Study Upstream of an Indiana Work Zone with Vehicle Matching

    by Michelle M. Mekker, Stephen M. Remias, Wayne A. Bunnell, Drake W. Krohn, Edward D. Cox, Darcy M. Bullock

    Traffic management in work zones presents significant mobility and safety challenges for agencies. The goals of a work zone traffic management plan are to safely slow vehicles ahead of the work zone, maintain speeds that provide for the safety of motorists and construction workers, and manage the growth of queues. Historically, variable speed limits (VSLs) have been presented as a form of technology that can dynamically regulate speed in response to prevailing traffic conditions. However, techniques used to evaluate the impact of VSLs typically use aggregated statistics such as mean and standard deviation to determine the typical speed reduction. This paper presents a new methodology to evaluate the impact of VSL signage on the basis of individual vehicle matching. The speeds and speed changes of these matched vehicles were used to analyze individual driver response to the VSLs. This approach allows agencies to understand the impact that VSL signage has on the distribution of vehicle speeds. It was concluded that vehicles would need to observe multiple signs before any tangible reduction in speed limit would occur. The new vehicle-matching methodology showed that, after drivers observed a 15-mph drop in the speed limit for cars (10 mph for trucks) on three consecutive VSL signs, they reduced their speed by a median of 7.5 mph (5.8 mph for trucks). Overall, 4% of cars and 10% of trucks complied with the 55-mph speed limit after the observance of three VSL signs.


  • Shock Wave Boundary Identification Using Cloud-Based Probe Data

    by Howell Li, Stephen M. Remias, Christopher M. Day, Michelle M. Mekker, James R. Sturdevant, Darcy M. Bullock

    An important component of active management of freeways is the systematic identification of recurring and nonrecurring congestion, particularly the location of the shock wave boundary between the two flow regimes. In the past five decades, many publications have described point-based detection models. The emerging widespread availability of true space mean speed data obtained from probe vehicles greatly simplifies the incident detection problem. This paper describes the use of cloud-based crowdsourced probe data for detecting the boundary between uncongested and congested conditions. Time-stamped freeway segment speed data can be retrieved from a cloud source with standard web communication and data protocols on a predetermined time interval. After data retrieval, differences in speeds of adjacent roadway segments are computed for all segments across the state. The calculated differences are called the “delta speeds.” A threshold is then set for the computed delta speeds, and any record that surpasses the threshold triggers a warning via an incident management website to alert traffic management personnel. The delta speed data can also be aggregated over time for strategizing the management of shifting work zones or making capital investment decisions. This study used delta speed values to examine an incident on I-69 in northeast Indianapolis, Indiana. Data within a 5-h period were collected to analyze the dynamics of the back of the queue during reduced capacity caused by incident investigation. In addition, the area of analysis was expanded to 150 mi of I-69 over a 1-month period for finding locations with recurring backs of queues.


  • Performance Measures to Characterize Corridor Travel Time Delay Based on Probe Vehicle Data

    by Thomas M. Brennan, Stephen M. Remias, Lucas Manili

    Anonymous probe vehicle data are being collected on roadways throughout the United States. These data are incorporated into local and statewide mobility reports to measure the performance of highways and arterial systems. Predefined spatially located segments, known as traffic message channels (TMCs), are spatially and temporally joined with probe vehicle speed data. Through the analysis of these data, transportation agencies have been developing agencywide travel time performance measures. One widely accepted performance measure is travel time reliability, which is calculated along a series of TMCs. When reliable travel times are not achieved because of incidents and recurring congestion, it is desirable to understand the time and the location of these occurrences so that the corridor can be proactively managed. This research emphasizes a visually intuitive methodology that aggregates a series of TMC segments based on a cursory review of congestion hotspots within a corridor. Instead of a fixed congestion speed threshold, each TMC is assigned a congestion threshold based on the 70th percentile of the 15-min average speeds between 02:00 and 06:00. An analysis of approximately 90 million speed records collected in 2013 along I-80 in northern New Jersey was performed for this project. Travel time inflation, the time exceeding the expected travel time at 70% of measured free-flow speed, was used to evaluate each of the 166 directional TMC segments along 70 mi of I-80. This performance measure accounts for speed variability caused by roadway geometry and other Highway Capacity Manual speed-reducing friction factors associated with each TMC.


  • Performance Ranking of Arterial Corridors Using Travel Time and Travel Time Reliability Metrics

    by Christopher M. Day, Stephen M. Remias, Howell Li, Michelle M. Mekker, Margaret L. McNamara, Edward D. Cox, Darcy M. Bullock

    Performance measures are essential for managing transportation systems and demonstrating agency accountability. Probe vehicles are an effective means for gathering vast amounts of information about highway networks. This paper presents a scalable methodology for analyzing arterial travel times that considers both the central tendency and the reliability of the travel time. A pilot analysis was carried out for 28 arterials with a total of 341 signalized intersections across Indiana. Starting from individual minute-by-minute speed records, the data were converted into travel times and aggregated into time series cohorts that correspond to typical traffic signal time-of-day periods. The data were normalized for the ideal travel time (based on the speed limits on each route) to account for individual route lengths and speeds. The data were compiled for all Wednesdays from January through July 2014 for investigation of arterial characteristics. The results show that a greater density of traffic signals on a route loosely corresponds to higher average travel times and less reliability. A composite index incorporating both the average values and reliability characteristics of travel time is developed and is used to rank the arterials by performance.


  • Assessment of Speed Limit Locations Using Crowdsourced Probe Vehicle Data

    by Stephen M. Remias, Michelle Mekker, Margaret McNamara, James R. Sturdevant, Edward D. Cox, Darcy M. Bullock

    Recently there has been an increased interest in using technology to apply variable speed limit techniques to Interstate roadways. An important component of changing speed limit signs (or variable speed limit signs) is an outcome assessment that collects measured data for understanding the effect on the network. For 265 mi of I-65 in Indiana, the speed limit locations were geolocated and paired with crowdsourced probe vehicle data to develop metrics that engineers and decision makers could use to optimize speed limit placement. Four case studies show the effect of different types of speed reduction and opportunities to improve the current placement. The visual performance measures described in this paper are readily deployable and scalable to any freeway in the country for assessing variable speed limits, work zone speed limits, and static speed limits.