ZMZachary R. Mansley

Zachary R. Mansley

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zachary R. Mansley has a total of 92 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Correlating the Synthesis and Electrochemical Performance of Complex Multi-Element High Entropy Oxides

    by Justin Fang, Marie F. Millares, Zachary R. Mansley, Armando Rodriguez Campos, Patrick J. Barry, Jessica Luo, Aravind Raji, Ryan C. Hill, Alexis Pace, Bishaka Dahal, et al.

    High-entropy materials, especially high-entropy alloys and oxides, have sparked immense interest in the past few years due to their novel and curiously complex stoichiometries and structures, thereby allowing for the potential to generate materials with highly tunable and functional properties. Many of the studies on high entropy oxides have focused on five-cation-containing oxides produced via solid-state syntheses. Herein, we report on the practicality of the solution-based synthesis of 9-element high entropy oxide nanoparticles, incorporating Al, Co, Cu, Fe, Mg, Mn, Ni, Ti, and Zn, and have probed reaction conditions that influence the stability of the resulting single-phase spinel crystal structure. The separate but important discrete effects of (a) solvent, (b) surfactant, and (c) heating method, as well as (d) constituent cation composition, respectively, have been systematically explored and correlated with their resulting electrochemical properties and their microstructure, as revealed by complementary HR-TEM analysis. It has been found that nanoparticles characterized by single-phase spinel chemical compositions can be reliably reproduced with a wide variety of cations.


  • Synergistic Benefit of Atomic to Nanoscale Disorder: Electrochemistry and Structural Evolution of Hybrid Layered-Spinel High Entropy Oxide Cathode Material

    by Jessica Luo, Cynthia Huang, Zachary R. Mansley, Aravind Raji, Marie F. Millares, Alexis Pace, David J. Arnot, Patrick J. Barry, Jianming Bai, Hui Zhong, et al.

    The high entropy design of cathode materials can be used to advance materials properties. Here the strategy is applied to Li- and Mn-rich oxides, where voltage fade has been an ongoing issue that has limited their practical implementation as lithium-ion battery cathode materials. Notably, the compositional complexities of high entropy oxides (HEOs) pose challenges to understanding the structure-function relationship. Bulk to atomic level characterization of two HEOs with similar nominal compositions, LixMn0.6Ni0.1Co0.1Fe0.1Al0.1Oy, where x = 1.5 for HEO-L and x = 0.5 for HEO-H, was accomplished herein to probe structural and chemical changes and to understand how high entropy designs at the atomic level and (dis)ordered phase compositions at the nanoscale contribute to the observed electrochemistry. X-ray diffraction and electron microscopy were used to probe changes in the crystal lattice and microstructure. HEO-L was found to display a higher initial capacity but underwent continuous structural evolution from its layered phase to a spinel-like phase. Spectroscopic characterization revealed the formation of oxygen vacancies and reduction of the Mn, Ni, and Co transition metals. The depreciating voltage profile was attributed to metal reduction caused by oxygen loss after electrochemical cycling, resulting in the activation of a lower voltage redox couple. In contrast, HEO-H exhibited a small lattice expansion but maintained its layered-spinel hybrid structure after 100 cycles with minimal capacity and voltage fade. Limited oxygen loss and metal ion reduction were also observed. The stable electrochemistry was attributed to the structural stability of HEO-H, resulting in reversible phase transitions between the cubic spinel and tetragonal phase.

  • Identifying the Role of Magnesium Content in Assessing the Electrochemical Performance of (CoCuMgNiZn)O

    by Justin Fang, Marie F. Millares, Zachary R. Mansley, Jessica Luo, Zhongling Wang, Cynthia Huang, Patrick J. Barry, Ryan C. Hill, Alexis Pace, Joshua Garcia, et al.

    High-entropy oxides (HEOs) featuring 5 or more metals in approximately equimolar ratios, such as the prototypical rock-salt-structured (CoCuMgNiZn)O, have attracted interest for their potential to display material properties superior to oxides with combinations of 4 or fewer of the component metals. In particular, (CoCuMgNiZn)O has shown promise as an anode for lithium-ion batteries with a high specific capacity retention over extended cycling. Previous studies have suggested that magnesium, despite being electrochemically inert, provides a crucial contribution to the favorable performance of this HEO by stabilizing the crystal structure through repeated charge-discharge cycles. This paper probes the extent and mechanism of the magnesium effect by using a facile microwave-assisted hydrothermal synthesis method to vary the level of Mg content. Moreover, we extensively characterized the product with techniques such as 4D-STEM and ICP-OES, which have not previously been applied in combination with this material, in order to elucidate the relationships among chemical composition, nanostructure, and performance. We show that the level of Mg incorporation is positively correlated with long-term stability and negatively correlated with rate capacity, and that the latter effect yields a stronger influence upon the overall performance, with the best-performing sample possessing a Mg quantity equivalent to ∼1/5 that of an equimolar concentration. This finding demonstrates not only that the variation of individual elemental levels offers a promising and relatively unexplored avenue to optimize the electrochemical performance of HEO materials but also that it should not be assumed that equimolar compositions of constituent elements are necessarily the best.


  • Compositionally Complex Spinel Oxides as Conversion Anodes for Lithium-Ion Batteries

    by Ki-Hun Nam, Zhongling Wang, Jessica Luo, Juhyeon Ahn, Zachary R. Mansley, Seungkyu Kim, Myoung Hwan Oh, Mary C. Scott, Armando Rodriguez-Campos, Cynthia Huang, et al.

    Four different compositionally complex multicomponent M3O4 spinels containing 5-8 distinct metals were prepared by a rapid combustion synthesis method or solvothermal synthesis. High resolution synchrotron X-ray diffraction patterns show that the materials consist primarily of spinel phases with small amounts of rock salt impurities, and, in several samples, a minor amount of contracted spinel phase. Materials were investigated as conversion anodes in lithium half-cells and delivered significantly higher capacities than two-component MgFe2O4 made by combustion synthesis. X-ray absorption near-edge structure (XANES) was used to estimate the oxidation states of the metals in the pristine, lithiated (discharged) and delithiated (charged) materials to better understand the redox processes in half cells that led to the improvement. Co, Ni, and Zn are reduced to low oxidation states during lithiation (cell discharge) but are only partially oxidized. The presence of a conductive metallic network that forms after lithiation is thought to account for the improved electrochemical characteristics. Interestingly, in most of the samples, iron is not fully reduced during initial lithiation unlike what happens with a set of related high entropy spinel ferrites studied previously. The improved electrochemical properties of these materials illustrates both the advantages of complexity and the difficulties in predicting their behavior.


  • Structural, Electrochemical, and (De)lithiation Mechanism Investigation of Cation-Disordered Rocksalt and Spinel Hybrid Nanomaterials in Lithium-Ion Batteries

    by Arun Kingan, Cynthia Huang, Zachary R. Mansley, Ryan C. Hill, Zhongling Wang, David C. Bock, Lei Wang, Lu Ma, Steven N. Ehrlich, Jianming Bai, et al.

    Significant demand for lithium-ion batteries necessitates alternatives to Co- and Ni-based cathode materials. Cation-disordered materials using earth-abundant elements are being explored as promising candidates. In this paper, we demonstrate a coprecipitation synthetic approach that allows direct preparation of disordered rocksalt Li2.4Fe1.0Ti1.0O4.7 (r-LFTO·C) and spinel structured hybrid Li0.5Fe1.0Ti0.9O3.2·C (s-LFTO·C) nanoparticles with a conformal conductive carbon coating. High-angle annular dark-field imaging coupled with electron energy loss spectroscopy mapping shows uniform Fe/Ti distribution with minor compositional variation among particles. Cation disorder was confirmed for both of the materials at an atomic level, with a short-range order more pronounced in r-LFTO·C. Operando X-ray absorption spectroscopy, ex situ hard X-ray photoelectron spectroscopy, ex situ soft X-ray absorption spectroscopy, and ex situ synchrotron X-ray diffraction were used to investigate (de)lithiation in the bulk and at the surface. Structurally, the r-LFTO·C demonstrated reversible partial Fe center migration between octahedral and tetrahedral sites during (de)lithiation. The r-LFTO·C evidenced that the redox of O was coincident with iron redox during initial electrochemical cycling, while iron redox dominated later cycling. In contrast, s-LFTO·C electrochemistry involved iron redox throughout the cycling process. The findings rationalize the differences in the electrochemistry where r-LFTO·C shows higher initial capacity yet poorer capacity retention over a voltage window where O redox can be accessed, while the s-LFTO·C shows lower initial capacity yet improved capacity retention.


  • Impact of Synthetic Parameters on Structure and Electrochemistry of High-Entropy Layered Oxide LiNi0.2Co0.2Mn0.2Al0.2Fe0.2O2

    by Marie F. Millares, Jessica Luo, Zachary Mansley, Cynthia Huang, Patrick J. Barry, Alexis Pace, Lei Wang, David C. Bock, Lu Ma, Steven N. Ehrlich, et al.


  • Open Access

    Synthesis of Amorphous and Various Phase-Pure Nanoparticles of Nickel Phosphide with Uniform Sizes via a Trioctylphosphine-Mediated Pathway

    by David Thompson, Adam S. Hoffman, Zachary R. Mansley, Sarah York, Feng Wang, Yimei Zhu, Simon R. Bare, Jingyi Chen

    Nickel phosphides are of particular interest because they are highly active and stable catalysts for petroleum/biorefinery and hydrogen production. Despite their significant catalytic potential, synthesizing various phase-pure nickel phosphide nanoparticles of uniform size remains a challenge. In this work, we develop a robust trioctylphosphine (TOP)-mediated route to make highly uniform phase-pure Ni12P5, Ni2P, and Ni5P4 nanoparticles. The synthetic route forms amorphous Ni70P30 nanoparticle intermediates. The reactions can be stopped at the amorphous stage when amorphous particles are desired. The amount of P incorporation can be controlled by varying the ratio of TOP to Ni(II). The mechanism for composition control involves the competition of the kinetics of two processes: the addition of the reduced Ni and the incorporation of P into Ni. Uniform Ni70P30 amorphous nanoparticles can be generated at a high TOP-to-Ni(II) ratio, where the P incorporation kinetics is made to dominate. Ni70P30 can later be transformed into phase-pure Ni12P5, Ni2P, and Ni5P4 nanocrystals of uniform size. The transformation can be controlled precisely by modulating the temperature. A UV-vis study coupled with theoretical modeling reveals Ni(0)-TOPx complexes along the synthetic path. This approach may be expanded to create other metal compounds, potentially enabling the synthesis of uniform nanoparticles of a greater variety.


  • Manganese-rich high entropy oxides for lithium-ion batteries:materials design approaches to address voltage fade

    by Cynthia Huang, Jessica Luo, Zachary R. Mansley, Arun Kingan, Armando Rodriguez Campos, Zhongling Wang, Edelmy J. Marin Bernardez, Alexis Pace, Lu Ma, Steven N. Ehrlich, et al.

    Lithium- and manganese-rich oxides are of interest as lithium-ion battery cathode materials as Mn is earth abundant, low cost, and can deliver high capacity. Herein, a high entropy strategy was used to prepare Mn rich high entropy oxide (HEO) materials by including four additional metals (Ni, Co, Fe and Al) in the compositions using a mild co-precipitation method. Two HEOs (LixNi0.1Mn0.6Co0.1Al0.1Fe0.1Oy, where x = 1.5 for HEO-L and x = 0.5 for HEO-H) with layered and spinel-layered hybrid structures were investigated where the morphology, elemental composition, structure, atomic level phase distribution, and electrochemistry were determined. The HEO-L samples involve a Li2TMO3 layered structure with ∼39% stacking faults. HEO-H is a hybrid structure comprised of 80 wt% spinel and 20 wt% LiMO2 layered structure. The high entropy manganese-rich HEO-L showed higher capacity and 93% retention of the average voltage after 100 cycles while HEO-H showed higher capacity retention and near 100% average voltage retention. Operando X-ray absorption spectroscopy revealed that the Ni, Co, and Mn are redox active in both materials while the Fe center remains at the Fe3+ oxidation state throughout cycling, where the changes in the oxidation states for both materials during discharge were consistent with the delivered electrochemical capacity rationalizing the observed electrochemistry.


  • Identifying point defects and ordering in the high-entropy layered oxide Li1.5MO3-δ (M=Mn, Al, Fe, Co, Ni) for energy storage applications

    by Zachary R. Mansley, Cynthia Huang, Patrick Barry, Armando Rodriguez-Campos, Marie F. Millares, Zhongling Wang, Lu Ma, Steven N. Ehrlich, Shan Yan, Esther S. Takeuchi, et al.


  • Defect-Driven Configurational Entropy in the High-Entropy Oxide Li1.5MO3-δ

    by Zachary R. Mansley, Cynthia Huang, Jessica Luo, Patrick Barry, Armando Rodriguez-Campos, Marie F. Millares, Zhongling Wang, Lu Ma, Steven N. Ehrlich, Esther S. Takeuchi, et al.

    Layered lithiated oxides are promising materials for next generation Li-ion battery cathode materials; however, instability during cycling results in poor performance over time compared to the high capacities theoretically possible with these materials. Here we report the characterizations of a Li1.47Mn0.57Al0.13Fe0.095Co0.105Ni0.095O2.49 high-entropy layered oxide (HELO) with the Li2MO3 structure where M = Mn, Al, Fe, Co, and Ni. Using electron microscopy and X-ray spectroscopy, we identify a homogeneous Li2MO3 structure stabilized by the entropic contribution of oxygen vacancies. This defect-driven entropy would not be attainable in the LiMO2 structure sometimes observed in similar materials as a secondary phase owing to the presence of fewer O sites and a 3+ oxidation state for the metal site; instead, a Li2-γMO3-δ is produced. Beyond Li2MO3, this defect-driven entropy approach to stabilizing novel compositions and phases can be applied to a wide array of future cathode materials including spinel and rock salt structures.