NDNeerja Dharmale

Neerja Dharmale

*This is an algorithmically generated author record based on publicly available information.

Neerja Dharmale has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Classification of epileptic seizure using hybrid deep learning framework with time and time-frequency Hjorth features

    by Neerja Dharmale, Rupesh Mahamune, Kamlesh Kahar, Amit Dolas, Hitesh Tekchandani

    In this work, a novel framework is proposed which includes Hjorth parameters as features from time and time-frequency domain (Multi-Domain) and attention-enhanced temporal modeling, to classify epileptic seizure stages, namely normal, inter-ictal, and ictal. Three different approaches are compared, i.e. Hjorth parameters in time domain, time-frequency domain, and multi-domain. In time-frequency domain, Hjorth parameters are derived from the wavelet coefficients obtained using Discrete Wavelet Transform (DWT). The extracted features are then fed to a 1D Convolutional Neural Network (CNN), Bidirectional Long Short-Term Memory (BiLSTM), and attention mechanism. The performance of the proposed framework is evaluated on Bonn EEG dataset using different performance evaluation metrics namely precision, recall, F1-score, and accuracy. The binary, three-class, and five-class seizure classification are examined using the proposed framework. The validation of the model is performed through the 10-fold cross-validation with sample level partitioning. Experimental findings show that the proposed framework with multi-domain features has given outstanding performance with 98.40, 98.00, and 85.40% test classification accuracy for binary, three-class, and five-class discrimination, respectively.


  • Evaluating the Effect of Metal, Nonmetal, and Co-Doping on Brookite TiO2

    by Neerja Dharmale, Rupesh Mahamune, Modugu Krishnaiah, Jayanta Kumar Kar

    The study utilizes the OLCAO-LBFGS-GGA-PBESol method to investigate the structural properties of both doped and undoped brookite TiO2. Electronic characteristics are explored employing the OLCAO-LBFGS-MGGA-TB09+c approach. Detailed analyses of Density of States (DOS) and Partial Density of States (PDOS) are conducted to understand band structures. Both doped and undoped scenarios exhibit a direct bandgap. Moreover, doping induces a reduction in the bandgap value, enhancing its potential for photovoltaic and photocatalytic applications. The study also establishes a strong agreement between the derived lattice parameters and bandgap for pure brookite TiO2 and experimental lattice parameters and bandgap value.

  • Performance analysis of un-doped and doped titania (TiO$_2$) as an electron transport layer (ETL) for perovskite solar cells

    by Neerja Dharmale, Aadhityan A, Ashutosh Srivastava, Saurabh Chaudhury

    Context Density functional theory (DFT) calculations are carried out on pure and doped rutile TiO\(_2\). The bandgap (E\(_g\)) for pristine, S-doped, Fe-doped, and Fe/S co-doped materials is direct, with values of 2.98 eV, 2.18 eV, 1.58 eV, and 1.40 eV. The effective mass of charge carriers (m*) and ratio of effective masses of holes to effective masses of electrons (R) are also investigated, and it is discovered that Fe/S co-doped materials have the lowest charge carrier recombination rate. The Fe/S co-doped material has the highest \(\varepsilon (\omega )\). \(\alpha (\omega )\) of doped materials shifted into the visible range. Due to the high dopant concentration in Fe and Fe/S-doped cases, the E\(_g\) is lowered to a relatively small value; hence, only pristine and S-doped materials are verified as electron transport layer (ETL). A solar cell device analysis employing pure and S-doped rutile TiO\(_2\) as ETL is completed using DFT-derived parameters in SCAPS-1D modeling software for the first time. For the optimized solar cells, current–voltage (IV) characteristics, quantum efficiency (QE), capacitance-voltage (CV) characteristics, and capacitance-frequency (Cf) characteristics are provided. The aim of the present study is to improve efficiency of perovskite solar cell by doping as well as to improve accuracy of simulation by applying DFT extracted parameters as input. From the analysis, improvement is found in efficiency of doped TiO\(_2\) compared to un-doped TiO\(_2\). The efficiency of the PSC with S-doped ETL is 1.418% higher than the PSC with un-doped ETL. Method Quantumwise Automistic Tool Kit (ATK) is used to extract DFT parameters. Using these DFT parameters as input in SCAPS-1D (Solar Cell Capacitance Simulator), solar cells for doped and un-doped material are simulated. The density functional theory (DFT)-based orthogonalized linear combination of atomic orbital (OLCAO) technique is used. Structural optimization is done using the LBFGS (Limited-memory Broyden-Fletcher-Goldfarb-Shanno). PBESol-GGA (Perdew-Burke-Ernzerhof solid-generalized gradient approximation) is applied as exchange correlation for calculating structural parameters, while MGGA-TB09 (meta-generalized gradient approximation-Tran and Blaha) is applied as exchange correlation for calculating optical and electronic properties.


  • Open Access

    Exploring the Applicability of Un-doped and Doped Rutile TiO2 in Lead-Free Perovskite Solar Cells

    by Neerja Dharmale, Saurabh Chaudhury

    On pure and metal, non-metal, co-doped rutile TiO2, DFT simula- tions are performed. For the stability study of doped materials, the defect formation energies of non-metal (S), metal (Fe), and metal and non-metal (Fe/S) co-doped materials are determined. A Ti- rich environment is preferable over an O-rich environment. With values of 2.98 eV, 2.18 eV, 1.58 eV, and 1.40 eV, the bandgap for pristine, S-doped, Fe-doped, and Fe/S co-doped materials is found to be direct. The effective masses (m*) and ratios (R) of charge carriers are also examined, and it is discovered that Fe/S co-doped material has the lowest charge carrier recombination rate. The maximum static dielectric constant is found in the Fe/S co-doped material. Doped material’s absorption spectra shifted into the vis- ible region. Additionally, using SCAPS-1D simulation software, a complete solar cell device study using these materials as ETL is performed for the first time. The absorber layer and the ETL settings have been tweaked to perfection. Current-voltage (IV) characteristics, quantum efficiency (QE), capacitance-voltage (CV) characteristics, and capacitance-frequency (Cf) character- istics are provided for optimize solar cells.When the smallest degree of defect for each layer is taken into account, the solar cell with Fe/S co-doped ETL has the highest efficiency of 34.27%.

  • Theoretical investigation on un-doped and doped TiO2 for solar cell application

    by Neerja Dharmale, Saurabh Chaudhury, Chandan Kumar Pandey

    Enhancing solar cell efficiency is one of the most challenging and demanding topics for PV researchers. An ab initio study is done here on the structure of crystal, formation energies, electronic structure, the density of states, effective mass, and optical properties of pure and S-doped, Fe-doped, and Fe-/S-doped anatase TiO2. Co-doping causes a significant reduction in the bandgap, suppresses the charge carrier’s recombination rate, and shifted absorption spectra from UV to the visible region. Hence, co-doped anatase TiO2 with Fe and S is more favorable as a buffer layer of the solar cell compared to S-doped and Fe-doped TiO2. The forecasted values of all quantities will benefit researchers to examine these materials for further photovoltaic applications.


  • DFT based studies on the structural, electronic and optical properties of LiNbO 3 using some hybrid techniques

    by Jayanta Kumar Kar, Neerja Dharmale, Saurabh Chaudhury

    Structural, electronic, and optical properties of ferroelectric material, Lithium niobate (LiNbO 3 ) are explored and studied using two different techniques namely, OLCAO-MGGA-TB09+c and OLCAO-GGA-PBES + U under the framework of density functional theory (DFT). The electronic properties such as band diagram, the effective mass of charge carriers, the total density of state (TDOS), and partial density of state (PDOS) are investigated in depth. Band gap values obtained using MGGA-TB09+c is 3.79 eV whereas, it is 3.78 eV for GGA-PBES + U. Furthermore, several optical properties such as dielectric constant, reflectivity, refractive index, optical conductivity, loss function, and absorption coefficient have also been extracted. It is seen that the results so obtained are consistent with experimental data which shows the soundness of our calculations. From the statistical analysis, it is found that both the techniques provide very good results on electronic and optical properties of LiNbO 3 compared to existing computational work as both give an approximation of experimental data. The methods presented here will be useful for researchers to get accurate results on structural, electronic, and optical properties of other materials.


  • Various Exchange-Correlation Effects on Structural, Electronic, and Optical Properties of Brookite TiO2

    by Neerja Dharmale, Saurabh Chaudhury, Jayant Kumar Kar

    This work investigates the consequences of various exchange correlations on brookite titanium dioxide’s (TiO 2 ) structural, electronic, and optical properties. For the first time, statistical analysis of the obtained result compared to experimental data is done to find the best methods for numerous properties. It provides an in-depth study on brookite TiO 2 by implementing OLCAODFTLBFGS algorithms along with GGA-PBE, GGA-PBES, GGA-PW91, GGA-BPW91, GGA-BP86, MGGA-TB09, and Hubbard U parameters to find out multiple properties. Investigated lattice parameters using GGA-PBES shows 0.43%, 0.56%, and 0.09% variation with experimental data, which further improved as 0.08%, 0%, and 0.21%, including Hubbard U parameter in the calculations. E g using OLCAO-MGGA-TB09 shows no variations with the experimental value. Obtained range of absorption offers good agreement with experimental spectra. The statistical analysis using different methods for various properties described here can help find the best suitable ways for other materials. From the analyzed results, it revealed that GGA-PBES+U gives improved structural properties, whereas OLCAO-MGGA-TB09 gives an improvement in electronic properties. DFT provides good results for optical properties than DFT+U.


  • Pressure-Induced Phase Transition Study on Brookite to Rutile TiO2 Transformation

    by Neerja Dharmale, Saurabh Chaudhury, Jayant Kar

    In this paper, the effect of pressure on various properties of brookite and rutile TiO 2 has been investigated along with a phase transition study. It is seen that brookite gets transformed to rutile TiO 2 at 5 GPa pressure. The bandgap of brookite and rutile TiO 2 are direct in nature with values of 3.41 eV and 2.98 eV. Pressure-dependence of the Elastic compliance coefficients, elastic stiffness coefficients, bulk modulus, shear modulus, Young modulus, Poisson’s ratio, B/G ratio, Vickers hardness, Lame constant has been calculated at 0, 3, 5 GPa pressures for brookite TiO 2 and at 0, 5, 10, 15, and 20 GPa pressures for rutile TiO 2 . The shear anisotropy factors (A 100 , A 010 , and A 001 ) along {100}, {010}, and {001} planes have been estimated at different pressure for brookite TiO 2 as well as the shear anisotropic factors along {100} and {001} shear planes is estimated for rutile TiO 2 . Moreover, anisotropy factors (A B ), (A G ), and (A U ) have been estimated at different pressure for brookite TiO 2 and rutile TiO 2 . Furthermore, the dielectric constant is determined to investigate other optical properties for both the structures at different pressures. A pretty good agreement has been obtained between our findings and experimental data.