ECEnrique Sanchez Cristobal

Enrique Sanchez Cristobal

*This is an algorithmically generated author record based on publicly available information.

Enrique Sanchez Cristobal has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    High-performance mid-infrared InP-based quantum cascade lasers monolithically integrated onto silicon

    by Enrique Cristobal, Alejandro Villalobos Meza, Matthew Fetters, Amy Liu, Joel Fastenau, Arkadiy Lyakh

    A mid-infrared InP-based quantum cascade laser (QCL) structure is directly grown by molecular beam epitaxy on an 8-in. Ge-coated Si template. The semiconductor structure employs a metamorphic (GaAs/AlInAs) buffer and a strain-compensated active region comprising 26 stages based on an Al0.68In0.32As/Ga0.32In0.68As composition to achieve a record-high wall plug efficiency of 11% for a mid-infrared QCL-on-Si and a peak optical output power exceeding 10 W from a 10 mm × 30.3 μm ridge waveguide device. The device emission wavelength is centered at λ = 4.4 μm. Characterization by cathodoluminescence and transmission electron microscopy reveals a threading dislocation density of 1.0 × 107 cm−2 in the upper cladding and 3.7 × 107 cm−2 in the active region. These results present an advancement in the integration of high performance QCLs on silicon photonic platforms, further paving the way for scalable, low cost mid-infrared photonic integration.

  • Cathodoluminescence-integrated electron microscopy for failure analysis of long-wave ridge waveguide quantum cascade lasers

    by Alejandro Villalobos Meza, Enrique Sanchez Cristobal, Jack Erspamer, Hong Shu, Arkadiy Lyakh

    This work presents the refined implementation of a previously developed electron microscopy characterization process for analyzing the propagation of defects within quantum cascade lasers (QCLs) as they relate to device degradation and eventual failure during continuous-wave operation. Electron microscopy techniques such as scanning electron microscopy and transmission electron microscopy are used to isolate the presence of defect nucleation sites within a set of ridge waveguide QCLs emitting in the long-wave infrared range. In addition to these methods, the use of cathodoluminescence as a standout tool for the localization and characterization of dislocations is demonstrated for QCLs. The method is illustrated through a defect density analysis of different QCL wafers grown on lattice mismatched substrates. It is then implemented as an intermediate step in the damage analysis, where it serves a dual purpose of characterizing the propagation of crystalline defects in the QCL cladding for a large field of view, while also providing information which allows for more informed lamella extraction for subsequent TEM imaging. The observed defect sites are detected across a range of devices, from healthy baseline devices to those exhibiting sub-par performance and failure. The primary defect in these samples is observed to result from delamination between the SiN and InP interface in the ridge waveguide, creating large discontinuities within the active region and contributing to device degradation and failure.


  • Epitaxial-Material Characterization Data for InP-Based Quantum Cascade Lasers Grown on Silicon Substrate

    by Enrique Sanchez Cristobal, Matthew Fetters, Amy W. K. Liu, Joel M. Fastenau, Ahmad Azim, Luke Milbocker, Rowel Go, Alejandro Villalobos-Meza, Arkadiy Lyakh

    Recent advancements in quantum cascade lasers (QCLs) grown on silicon substrates have showcased the potential of this technology in realizing cost-effective integrated infrared photonics platforms. Epitaxial-material characterization data from the demonstrated lasers operating in the mid-wave and long-wave infrared spectral regions and its analysis are presented in this work. The analysis indicates that reducing defect density in the active region to below 2 × 107/cm−2 is essential for achieving performance comparable to high-performance QCLs grown on native InP substrates. The data also suggest that defect density can be reduced by employing either lattice-matched designs or strain-balanced designs with a low-strain both in quantum wells and barriers and by reducing number of active region stages in the laser core.


  • Design of High Brightness Tree-Array Quantum Cascade Lasers With Broad Area Ridge Waveguides and Multimode Interference Couplers

    by Luke Milbocker, Dhruvkumar Desai, Hong Shu, Enrique Cristobal, Guifang Li, Arkadiy Lyakh

    Tree-array quantum cascade lasers (QCLs) are a promising architecture for brightness scaling of midwave infrared (MWIR) and longwave infrared (LWIR) QCLs. Simulations of multimode interference couplers are presented to aid the design of tree-array QCLs based on ridge waveguides. Experimental results are presented for tree-array QCLs at λ = 4.5μm and λ = 8.6μm. Nonuniform gain saturation is modeled for tree-array QCLs and is compared to experimental data to further aid in the design of high-brightness tree-array QCLs.


  • High peak power quantum cascade lasers monolithically integrated onto silicon with high yield and good near-term reliability

    by Enrique Cristobal, Matthew Fetters, Amy W. K. Liu, Joel M. Fastenau, Ahmad Azim, Luke Milbocker, Arkadiy Lyakh

    High peak power, room-temperature operation in the long wave infrared spectral region is reported for double-channel, ridge waveguide quantum cascade lasers (QCLs) monolithically integrated onto a silicon substrate. The 55-stage laser structure with an AlInAs/InGaAs core and InP cladding was grown by molecular beam epitaxy directly onto an 8-in. diameter germanium-coated silicon substrate template via a III–V alloy metamorphic buffer. Atomic force microscope imaging demonstrated a good quality surface for the full QCL structure grown on silicon, with improved roughness over wider areas compared to the previous work. Fabricated 3 mm × 26 μm lasers operate at room temperature, deliver more than 3 W of peak (6 mW of average) optical power, and show approximately 3% wall plug efficiency and 4.3 kA/cm2 threshold current density with emission wavelength centered at 11.5 μm. The lasers had a high yield with only around 15% max power deviation and no signs of performance degradation were observed over a 10 h burn in period at maximum power. Singled-lobed high quality output beam with M2 = 1.36 was measured for 3 mm × 22 μm devices, demonstrating that it is possible to produce high-brightness quantum cascade lasers on silicon with standard ridge waveguide processing paving the way for low-cost production of integrated mid-infrared platforms.


  • Electrically Pumped Microring Parity-Time-Symmetric Lasers

    by William E. Hayenga, Hipolito Garcia-Gracia, Enrique Sanchez Cristobal, Midya Parto, Hossein Hodaei, Patrick LiKamWa, Demetrios N. Christodoulides, Mercedeh Khajavikhan

    Microscale and nanoscale electrically pumped lasers are expected to play an indispensable role in future photonic integrated circuits. Small footprint, low threshold, high efficiency, and large side-mode suppression ratio (SMSR) are among the most important characteristics that such on-chip emitters should exhibit—allowing for large-scale integrability, low energy consumption, and stable output power. Microring resonators are one of the main contenders for the realization of such compact light sources. However, the use of microring laser cavities has been so far hindered by their tendency to operate in multiple modes. Quite recently, several studies have shown that notions from parity-time (PT)-symmetry and non-Hermitian physics can be utilized to effectively enforce single-mode operation in semiconductor microring laser arrangements. However, as of now, most works in this area were mainly devoted to the proof of concept demonstrations, while the feasibility of practical implementation has remained largely unexplored. In this article, we demonstrate the first regrowth free, electrically pumped microscale PT-symmetric laser. Our results can pave the way toward the utilization of exceptional points in more diverse applications ranging from on-chip light sources and modulators to laser beam steering systems and active sensors.


  • Experimental Realization of Supersymmetric Laser

    by Mohammad P. Hokmabadi, William Hayenga, Jinhan Ren, Enrique Sanchez Cristobal, Sanaz Faryadras, Ramy El-Ganainy, Demetrios N. Christodoulides, Mercedeh Khajavikhan

    A multimode, chaotic, and broadband emission is an undesired characteristic of laser arrays which is an adverse effect of supermodes in coupled waveguides. Employing optical supersymmetry, we experimentally demonstrate single mode lasing in arrays of supersymmetric lasers where a superpatner array eliminates undesired lasing modes.