Im Sik Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Im Sik Han has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Mark Hopkinson
University of Sheffield
8 shared publications - Chee Hing Tan
University of Sheffield
4 shared publications - Jo Shien Ng
University of Sheffield
4 shared publications - Yun-Ran Wang
Department of Electronic and Electrical Engineering, The University of Sheffield, Sir Frederick Mappin Building , Sheffield S1 3JD, United Kingdom
4 shared publications - Jonathan Taylor-Mew
University of Sheffield
3 shared publications - Jong Su Kim
Yeungnam University
3 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (11) , 6932-6938
Comparison of Thin Al x Ga 1- x AsSb Avalanche Regions for High-Speed Optical Communication
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (11) , 6932-6938
Comparison of Thin Al x Ga 1- x AsSb Avalanche Regions for High-Speed Optical Communication
- Open Access
- 9 April 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (8) , 14623
Planar InAs avalanche photodiodes with high gain and low noise factor
In photon-starved extended short- and mid-wave infrared optical applications, replacing Mercury Cadmium Telluride (HgCdTe) avalanche photodiodes (APDs) with Indium Arsenide (InAs) APDs offers significant environmental and cost benefits. To demonstrate InAs APDs as a viable alternative, we fabricated planar devices using ion implantation and rigorously characterised multiple devices under high-gain operating conditions. These planar APDs exhibited a very low excess noise factor ( F ∼ 1.4) for gains up to 250 at 77 K, comparable to HgCdTe devices. We believe this to be the first experimental report of such low excess noise in planar InAs APDs, marking a significant step towards establishing them as a realistic alternative.
- 9 April 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (8) , 14623
Open AccessPlanar InAs avalanche photodiodes with high gain and low noise factor
In photon-starved extended short- and mid-wave infrared optical applications, replacing Mercury Cadmium Telluride (HgCdTe) avalanche photodiodes (APDs) with Indium Arsenide (InAs) APDs offers significant environmental and cost benefits. To demonstrate InAs APDs as a viable alternative, we fabricated planar devices using ion implantation and rigorously characterised multiple devices under high-gain operating conditions. These planar APDs exhibited a very low excess noise factor ( F ∼ 1.4) for gains up to 250 at 77 K, comparable to HgCdTe devices. We believe this to be the first experimental report of such low excess noise in planar InAs APDs, marking a significant step towards establishing them as a realistic alternative.
- 20 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 6634-6640
Low Excess Noise Al 0.8 In 0.2 As 0.31 Sb 0.69 Avalanche Photodiodes Lattice Matched to InAs
Indium arsenide (InAs) is an exceptional material for absorbing infrared photons with wavelengths up to 3500 nm, making it ideal for mid-infrared detection. However, the development of high-performance separate sbsorption and multiplication avalanche photodiodes (SAM APDs) has been hindered by the absence of suitable low-noise avalanche materials compatible with InAs absorbers. In this study, we investigate the potential of Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ (lattice matched to InAs) as a low-noise avalanche material. We have performed comprehensive Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ excess noise measurements using three optical signal wavelengths on a large number of p-i-n and n-i-p diodes. Under pure electron injection, Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ p-i-n diodes exhibit very low excess noise factors ~4 at high gain of 100, corresponding to an effective $k$ of 0.030.03. In contrast, a small gain of 3 produces very high excess noise factors (>17) when using hole injection in the n-i-p diodes. The contrasting behavior indicates that in Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ electron ionization coefficient is much larger than hole ionization coefficient. As a consequence, low-noise Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ avalanche regions emerge as a promising candidate for the avalanche region of SAM-APDs designed for mid-infrared applications, such as methane gas sensing and imaging through fog. The design of such SAM-APDs should ensure electrons rather than holes are injected into the Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ avalanche regions to achieve the lowest possible excess noise factors.
- 20 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 6634-6640
Low Excess Noise Al 0.8 In 0.2 As 0.31 Sb 0.69 Avalanche Photodiodes Lattice Matched to InAs
Indium arsenide (InAs) is an exceptional material for absorbing infrared photons with wavelengths up to 3500 nm, making it ideal for mid-infrared detection. However, the development of high-performance separate sbsorption and multiplication avalanche photodiodes (SAM APDs) has been hindered by the absence of suitable low-noise avalanche materials compatible with InAs absorbers. In this study, we investigate the potential of Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ (lattice matched to InAs) as a low-noise avalanche material. We have performed comprehensive Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ excess noise measurements using three optical signal wavelengths on a large number of p-i-n and n-i-p diodes. Under pure electron injection, Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ p-i-n diodes exhibit very low excess noise factors ~4 at high gain of 100, corresponding to an effective $k$ of 0.030.03. In contrast, a small gain of 3 produces very high excess noise factors (>17) when using hole injection in the n-i-p diodes. The contrasting behavior indicates that in Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ electron ionization coefficient is much larger than hole ionization coefficient. As a consequence, low-noise Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ avalanche regions emerge as a promising candidate for the avalanche region of SAM-APDs designed for mid-infrared applications, such as methane gas sensing and imaging through fog. The design of such SAM-APDs should ensure electrons rather than holes are injected into the Al ${}_{{0}.{8}}$ In ${}_{{0}.{2}}$ As ${}_{{0}.{31}}$ Sb ${}_{{0}.{69}}$ avalanche regions to achieve the lowest possible excess noise factors.
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (8) , 4190-4195
InAs n-i-p Diodes Fabricated Using S and Si Ion Implantation
Planar indium arsenide (InAs) electron avalanche photodiodes (e-APDs) can provide significant avalanche gain with negligible excess noise. Reported InAs e-APDs are so far all top-side illuminated p-i-n diodes. Yet, back-side illuminated n-i-p diodes are needed to be compatible with focal plane arrays (FPAs) (bump-bonding process). This work reports n-type ion implantation into i-InAs layer grown on p-InAs layers, forming n-i-p diodes for the first time. Electrical and optical characteristics of S-and Si-implanted mesa and planar photodiodes are investigated both experimentally and through simulation. The mesa InAs n-i-p diodes fabricated from implanted samples exhibit similar dark current densities to previously reported Be implanted mesa InAs p-i-n diodes. A peak responsivity of 1.09 A/W at 2004 nm wavelength was demonstrated using S implanted detectors after rapid thermal annealing at 600 ∘C for 30 s. The simple planar diodes exhibit higher dark current compared to Be implanted planar InAs p-i-n diodes. This is attributed to poor junction isolation resulting from n-type unintentional doping in intrinsic InAs layers. This can be mitigated by adding isolation trenches around the diodes or introducing p-type isolation implant. Therefore, we have demonstrated a promising approach for fabricating bump-bonding compatible and back-illuminated InAs n-i-p planar diodes.
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (8) , 4190-4195
InAs n-i-p Diodes Fabricated Using S and Si Ion Implantation
Planar indium arsenide (InAs) electron avalanche photodiodes (e-APDs) can provide significant avalanche gain with negligible excess noise. Reported InAs e-APDs are so far all top-side illuminated p-i-n diodes. Yet, back-side illuminated n-i-p diodes are needed to be compatible with focal plane arrays (FPAs) (bump-bonding process). This work reports n-type ion implantation into i-InAs layer grown on p-InAs layers, forming n-i-p diodes for the first time. Electrical and optical characteristics of S-and Si-implanted mesa and planar photodiodes are investigated both experimentally and through simulation. The mesa InAs n-i-p diodes fabricated from implanted samples exhibit similar dark current densities to previously reported Be implanted mesa InAs p-i-n diodes. A peak responsivity of 1.09 A/W at 2004 nm wavelength was demonstrated using S implanted detectors after rapid thermal annealing at 600 ∘C for 30 s. The simple planar diodes exhibit higher dark current compared to Be implanted planar InAs p-i-n diodes. This is attributed to poor junction isolation resulting from n-type unintentional doping in intrinsic InAs layers. This can be mitigated by adding isolation trenches around the diodes or introducing p-type isolation implant. Therefore, we have demonstrated a promising approach for fabricating bump-bonding compatible and back-illuminated InAs n-i-p planar diodes.
- Open Access
- 23 September 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (12)
Photonic crystal enhanced light emitting diodes fabricated by single pulse laser interference lithography
Integration of photonic crystal (PhC) configurations onto the surfaces of light-emitting diodes (LEDs) can play an important role in enhancing light extraction efficiency. While the literature is rich with various PhC fabrication approaches, there is a need for high throughput methods that are appropriate for low-cost devices. In this paper, we report the use of single pulse laser interference lithography (LIL) for the fabrication of photonic crystal structures on LEDs. The use of brief nanosecond pulse exposures offers significant benefits for high-throughput production. In our study, we have applied single pulse LIL on GaAs/AlGaAs LED structures to achieve high-quality photoresist arrays and then have used inductively coupled plasma etching to create nanoholes into the epitaxial structure. The resulting array forms an effective PhC, controlling surface transmission. Electroluminescence (EL) analyses confirm that these structures enhance the average EL intensity of the LED by up to 3.5 times at room temperature. This empirical evidence underscores the efficacy and potential of this fabrication approach in advancing the functional capabilities of semiconductor-based light-emitting devices.
- 23 September 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (12)
Open AccessPhotonic crystal enhanced light emitting diodes fabricated by single pulse laser interference lithography
Integration of photonic crystal (PhC) configurations onto the surfaces of light-emitting diodes (LEDs) can play an important role in enhancing light extraction efficiency. While the literature is rich with various PhC fabrication approaches, there is a need for high throughput methods that are appropriate for low-cost devices. In this paper, we report the use of single pulse laser interference lithography (LIL) for the fabrication of photonic crystal structures on LEDs. The use of brief nanosecond pulse exposures offers significant benefits for high-throughput production. In our study, we have applied single pulse LIL on GaAs/AlGaAs LED structures to achieve high-quality photoresist arrays and then have used inductively coupled plasma etching to create nanoholes into the epitaxial structure. The resulting array forms an effective PhC, controlling surface transmission. Electroluminescence (EL) analyses confirm that these structures enhance the average EL intensity of the LED by up to 3.5 times at room temperature. This empirical evidence underscores the efficacy and potential of this fabrication approach in advancing the functional capabilities of semiconductor-based light-emitting devices.
- 1 August 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (5)
Investigation of capacitance for InAs/GaAs quantum dot solar cells by photoreflectance
The study provides experimental validation for the correlation between the photoreflectance signal’s time constant and the capacitances of various p-n junction quantum-dot solar cells. Photoreflectance spectra were measured on four structures with varying InAs/GaAs quantum dot layer thicknesses (1.7–3 monolayers), and time constants were extracted from the phase diagrams. A linear relationship was observed between these time constants and the cells’ capacitances. Analysis of the phase diagrams for different chopping frequencies revealed that this approach allows for the assessment of capacitances of a sample set through a single photoreflectance measurement. These findings underscore the potential of photoreflectance as a straightforward, contactless technique for comparing junction capacitance across samples. Furthermore, this work could enhance our understanding of photoreflectance in solar cell characterization and present a practical tool for evaluating capacitance in various optoelectronic devices, broadening the utility of nondestructive characterization techniques.
- 1 August 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (5)
Investigation of capacitance for InAs/GaAs quantum dot solar cells by photoreflectance
The study provides experimental validation for the correlation between the photoreflectance signal’s time constant and the capacitances of various p-n junction quantum-dot solar cells. Photoreflectance spectra were measured on four structures with varying InAs/GaAs quantum dot layer thicknesses (1.7–3 monolayers), and time constants were extracted from the phase diagrams. A linear relationship was observed between these time constants and the cells’ capacitances. Analysis of the phase diagrams for different chopping frequencies revealed that this approach allows for the assessment of capacitances of a sample set through a single photoreflectance measurement. These findings underscore the potential of photoreflectance as a straightforward, contactless technique for comparing junction capacitance across samples. Furthermore, this work could enhance our understanding of photoreflectance in solar cell characterization and present a practical tool for evaluating capacitance in various optoelectronic devices, broadening the utility of nondestructive characterization techniques.
- 15 March 2023
- Published by Elsevier in Current Applied Physics
- Vol. 50, 46-52
Investigation of junction electric fields for InAs quantum dot solar cells with photoreflectance spectroscopy
- 15 March 2023
- Published by Elsevier in Current Applied Physics
- Vol. 50, 46-52
Investigation of junction electric fields for InAs quantum dot solar cells with photoreflectance spectroscopy
- Open Access
- 5 April 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (14) , 142101
Ordered GaAs quantum dots by droplet epitaxy using in situ direct laser interference patterning
We report the fabrication of highly ordered arrays of GaAs/AlGaAs quantum dots (QDs) by droplet epitaxy using in situ direct laser interference patterning. Two-dimensional arrays of Ga droplets with a periodicity of ∼300 nm are initially formed on nanoisland structured AlGaAs surfaces due to the localized surface diffusion under the influence of a thermal gradient imposed by the light pulse. After crystallization under an arsenic flux, precisely ordered arrays of GaAs single dots are obtained. The size distribution and optical properties of the ordered GaAs QDs are shown to be optimized by the careful choice of parameters for nucleation and droplet formation.
- 5 April 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (14) , 142101
Open AccessOrdered GaAs quantum dots by droplet epitaxy using in situ direct laser interference patterning
We report the fabrication of highly ordered arrays of GaAs/AlGaAs quantum dots (QDs) by droplet epitaxy using in situ direct laser interference patterning. Two-dimensional arrays of Ga droplets with a periodicity of ∼300 nm are initially formed on nanoisland structured AlGaAs surfaces due to the localized surface diffusion under the influence of a thermal gradient imposed by the light pulse. After crystallization under an arsenic flux, precisely ordered arrays of GaAs single dots are obtained. The size distribution and optical properties of the ordered GaAs QDs are shown to be optimized by the careful choice of parameters for nucleation and droplet formation.
- Open Access
- 18 May 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (20) , 201901
Formation of laterally ordered quantum dot molecules by in situ nanosecond laser interference
We demonstrate the growth and surface characterization of laterally ordered arrays of InAs quantum dot molecules (QDMs) on GaAs (100) substrates produced by a combination of in situ interferometric nanopatterning and molecular beam epitaxy growth. Four-beam ultraviolet laser interference is applied during the growth process resulting in the formation of quasi two-dimensional islands due to localized surface diffusion. With further InAs deposition, the edges of the islands are observed to act as preferential sites for the nucleation of InAs quantum dots. Well-ordered square arrays of lateral QDMs with a period of 300 nm and site occupancy ranging from single dot up to hexa-molecules are obtained by varying the InAs coverage from 1.55 ML to 1.75 ML.
- 18 May 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (20) , 201901
Open AccessFormation of laterally ordered quantum dot molecules by in situ nanosecond laser interference
We demonstrate the growth and surface characterization of laterally ordered arrays of InAs quantum dot molecules (QDMs) on GaAs (100) substrates produced by a combination of in situ interferometric nanopatterning and molecular beam epitaxy growth. Four-beam ultraviolet laser interference is applied during the growth process resulting in the formation of quasi two-dimensional islands due to localized surface diffusion. With further InAs deposition, the edges of the islands are observed to act as preferential sites for the nucleation of InAs quantum dots. Well-ordered square arrays of lateral QDMs with a period of 300 nm and site occupancy ranging from single dot up to hexa-molecules are obtained by varying the InAs coverage from 1.55 ML to 1.75 ML.
- Open Access
- 20 April 2020
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 3 (5) , 4739-4746
Precise Arrays of Epitaxial Quantum Dots Nucleated by In Situ Laser Interference for Quantum Information Technology Applications
Precisely ordered arrays of InAs quantum dots are formed on a nanoisland-structured GaAs (100) surface using in-situ laser interference during self-assembled molecular beam epitaxial growth. Nanoislands induced by single-pulse four-beam laser interference act as preferential nucleation sites for InAs quantum dots and result in site occupation dependent on the size of nanoislands, the InAs coverage and the laser parameters. By optimizing the growth and interference conditions, regular dense ordering of single dots was obtained for the first time using this in-situ noninvasive approach. The photoluminescence spectra of the resulting quantum dot arrays with a period of 300 nm show good optical quality and uniformity. This technique paves the way for the rapid large-scale fabrication of arrays of single dots to enable quantum information technology device platforms.
- 20 April 2020
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 3 (5) , 4739-4746
Open AccessPrecise Arrays of Epitaxial Quantum Dots Nucleated by In Situ Laser Interference for Quantum Information Technology Applications
Precisely ordered arrays of InAs quantum dots are formed on a nanoisland-structured GaAs (100) surface using in-situ laser interference during self-assembled molecular beam epitaxial growth. Nanoislands induced by single-pulse four-beam laser interference act as preferential nucleation sites for InAs quantum dots and result in site occupation dependent on the size of nanoislands, the InAs coverage and the laser parameters. By optimizing the growth and interference conditions, regular dense ordering of single dots was obtained for the first time using this in-situ noninvasive approach. The photoluminescence spectra of the resulting quantum dot arrays with a period of 300 nm show good optical quality and uniformity. This technique paves the way for the rapid large-scale fabrication of arrays of single dots to enable quantum information technology device platforms.