Nicolò Azzaroli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Nicolò Azzaroli has a total of 221 co-authors. Here are the top co-authors by number of shared publications:
Cédric Plantet
Istituto Nazionale di Astrofisica (Italy)
7 shared publicationsSimone Esposito
Istituto Nazionale di Astrofisica (Italy)
7 shared publicationsTommaso Lapucci
Istituto Nazionale di Astrofisica (Italy)
7 shared publicationsEnrico Pinna
6 shared publicationsAlfio Puglisi
Istituto Nazionale di Astrofisica (Italy)
5 shared publicationsAntonin Bouchez
GMTO Corp. (United States)
5 shared publications
Latest Publications
- 17 September 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 352
Optical surface and cavity reconstruction from sub-aperture measurements
Large optics have become mandatory with the new generation of large telescopes. In this work, we aim to refine the optical surface estimation of a mirror. By using partial surface measurements, as in a standard sub-aperture sampling approach, we populate our surface using a continuously refined reconstructor that is optimal in a least-squares sense, converging to a stable solution that ensures surface continuity. Simultaneously, we estimate both the cavity and alignment errors for each individual measurement of the partial optical surface. The basis chosen for the estimation consists of the Zernike modes by Noll. Optical surfaces are estimated together with cavity and alignment parameters in a single, unified minimization process.
- 17 September 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 352
Optical surface and cavity reconstruction from sub-aperture measurements
Large optics have become mandatory with the new generation of large telescopes. In this work, we aim to refine the optical surface estimation of a mirror. By using partial surface measurements, as in a standard sub-aperture sampling approach, we populate our surface using a continuously refined reconstructor that is optimal in a least-squares sense, converging to a stable solution that ensures surface continuity. Simultaneously, we estimate both the cavity and alignment errors for each individual measurement of the partial optical surface. The basis chosen for the estimation consists of the Zernike modes by Noll. Optical surfaces are estimated together with cavity and alignment parameters in a single, unified minimization process.
- 21 August 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 186
MAVIS: alignment tolerance analysis for the natural guide star wavefront sensor and acquisition camera
In this work, we present the detailed alignment tolerance analysis via Monte-Carlo (MC) procedure performed on the Natural Guide Star Wavefront Sensor (NGS WFS) and the Acquisition Camera (Acq Cam) subsystem, key components of the MAVIS instrument for the VLT. This crucial study focuses on determining the residual alignment errors expected after opto-mechanical integration, the analysis addresses the degrees of freedom (DoFs) and associated alignment residuals for all critical optical elements. The NGS WFS analysis, conducted with 1500 MC replicas in both 1x1 and 2x2 configurations, demonstrated that the residual Wavefront Error (WFE) and geometrical spot radius are well within the requirement specifications. For the Acq Cam, an optimization process was implemented in the merit function to minimize the RMS spot size on axis and evaluating it at the max field. The results obtained from 2000 MC replicas confirm that, even in the worst-case scenario, the optical performance remains compliant with specifications, guaranteeing the system’s accuracy and sensitivity. This comprehensive analysis validates the robustness of the mechanical design and the critical alignment procedures.
- 21 August 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 186
MAVIS: alignment tolerance analysis for the natural guide star wavefront sensor and acquisition camera
In this work, we present the detailed alignment tolerance analysis via Monte-Carlo (MC) procedure performed on the Natural Guide Star Wavefront Sensor (NGS WFS) and the Acquisition Camera (Acq Cam) subsystem, key components of the MAVIS instrument for the VLT. This crucial study focuses on determining the residual alignment errors expected after opto-mechanical integration, the analysis addresses the degrees of freedom (DoFs) and associated alignment residuals for all critical optical elements. The NGS WFS analysis, conducted with 1500 MC replicas in both 1x1 and 2x2 configurations, demonstrated that the residual Wavefront Error (WFE) and geometrical spot radius are well within the requirement specifications. For the Acq Cam, an optimization process was implemented in the merit function to minimize the RMS spot size on axis and evaluating it at the max field. The results obtained from 2000 MC replicas confirm that, even in the worst-case scenario, the optical performance remains compliant with specifications, guaranteeing the system’s accuracy and sensitivity. This comprehensive analysis validates the robustness of the mechanical design and the critical alignment procedures.
- 3 September 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13097, 75-548
MORFEO at ELT: the adaptive optics module for ELT
MORFEO is a post-focal adaptive optics module that forms part of the first light instrument suite for the Extreme Large Telescope (ELT). The project is now in the Final Design Phase. In this paper, we report the status of the project.
- 3 September 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13097, 75-548
MORFEO at ELT: the adaptive optics module for ELT
MORFEO is a post-focal adaptive optics module that forms part of the first light instrument suite for the Extreme Large Telescope (ELT). The project is now in the Final Design Phase. In this paper, we report the status of the project.
- 27 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13097, 78-518
The Giant Magellan Telescope’s high contrast adaptive optics testbed: NGAO wavefront sensing and control laboratory results
The Natural Guide-star Adaptive Optics (NGAO) mode of the Giant Magellan Telescope (GMT) is one of the two diffraction-limited AO modes under development by GMTO and its partner institutions. It will use the Adaptive Secondary Mirror (ASM) for wavefront correction, and a Natural Guide star Wavefront Sensor (NGWS) unit featuring two visible-light sensing channels to measure wavefront aberrations, including phasing errors between the seven segments of the GMT. The first NGWS channel features a modulated pyramid wavefront sensor (PWFS) and the second NGWS channel features a Holographic Dispersed Fringe Sensor (HDFS), which unambiguously detects segment piston errors as large as ~10 microns in wavefront. To test the performance of this novel wavefront sensing architecture, a prototype of the NGWS was built and integrated with the High Contrast AO Testbed (HCAT) and the MagAO-X system in the laboratories of the Center of Astronomical Adaptive Optics (CAAO) of the University of Arizona. The INAF Arcetri AO group designed and built the first NGWS channel, while GMTO designed and built the second NGWS channel in collaboration with CAAO. We report in this contribution the results of the laboratory experiments conducted over two two-week runs held in 2023 that demonstrate the capability of the NGWS to sense and correct for wavefront and phasing errors under the presence of mild atmospheric disturbances using the GMT NGAO control algorithms adapted to the testbed.
- 27 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13097, 78-518
The Giant Magellan Telescope’s high contrast adaptive optics testbed: NGAO wavefront sensing and control laboratory results
The Natural Guide-star Adaptive Optics (NGAO) mode of the Giant Magellan Telescope (GMT) is one of the two diffraction-limited AO modes under development by GMTO and its partner institutions. It will use the Adaptive Secondary Mirror (ASM) for wavefront correction, and a Natural Guide star Wavefront Sensor (NGWS) unit featuring two visible-light sensing channels to measure wavefront aberrations, including phasing errors between the seven segments of the GMT. The first NGWS channel features a modulated pyramid wavefront sensor (PWFS) and the second NGWS channel features a Holographic Dispersed Fringe Sensor (HDFS), which unambiguously detects segment piston errors as large as ~10 microns in wavefront. To test the performance of this novel wavefront sensing architecture, a prototype of the NGWS was built and integrated with the High Contrast AO Testbed (HCAT) and the MagAO-X system in the laboratories of the Center of Astronomical Adaptive Optics (CAAO) of the University of Arizona. The INAF Arcetri AO group designed and built the first NGWS channel, while GMTO designed and built the second NGWS channel in collaboration with CAAO. We report in this contribution the results of the laboratory experiments conducted over two two-week runs held in 2023 that demonstrate the capability of the NGWS to sense and correct for wavefront and phasing errors under the presence of mild atmospheric disturbances using the GMT NGAO control algorithms adapted to the testbed.
- 27 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13097, 76-484
Adaptive optics development at the Giant Magellan Telescope: recent progress
In the past two years significant forward progress has been achieved in development of Adaptive Optics sensing and control technology needed for the observation modes of the Giant Magellan Telescope1. Most notable is the recent progress in demonstrating the accurate and stable control of segment piston in the diffraction-limited Natural Guide Star AO observation mode. Two NSF-funded testbeds have been successfully operated to validate the control algorithms for active optics, adaptive optics and segment piston in diffraction-limited observation. GMTO also built and operated wavefront sensor prototypes and integrated them with the testbeds. The testing has largely validated the wavefront sensor designs and has retired much of the fabrication and assembly risks. In parallel with the hardware demonstrations, significant progress has been achieved in both NGAO and LTAO control simulations verifying compliance with the required performance in each of these observation modes and thereby supporting the image quality budgets. In the area of design the GMTO Telescope Metrology Subsytem has passed its Preliminary Design Review and the conceptual design of the Adaptive Optics Test Camera has been completed. Finally, a Delta Preliminary Design phase for the LTAO hardware has begun.
- 27 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13097, 76-484
Adaptive optics development at the Giant Magellan Telescope: recent progress
In the past two years significant forward progress has been achieved in development of Adaptive Optics sensing and control technology needed for the observation modes of the Giant Magellan Telescope1. Most notable is the recent progress in demonstrating the accurate and stable control of segment piston in the diffraction-limited Natural Guide Star AO observation mode. Two NSF-funded testbeds have been successfully operated to validate the control algorithms for active optics, adaptive optics and segment piston in diffraction-limited observation. GMTO also built and operated wavefront sensor prototypes and integrated them with the testbeds. The testing has largely validated the wavefront sensor designs and has retired much of the fabrication and assembly risks. In parallel with the hardware demonstrations, significant progress has been achieved in both NGAO and LTAO control simulations verifying compliance with the required performance in each of these observation modes and thereby supporting the image quality budgets. In the area of design the GMTO Telescope Metrology Subsytem has passed its Preliminary Design Review and the conceptual design of the Adaptive Optics Test Camera has been completed. Finally, a Delta Preliminary Design phase for the LTAO hardware has begun.
- Open Access
- 1 April 2023
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 9 (02) , 029002-19
On the effects of spider-arms vignetting on interferometric measurements of deformable mirrors
The interferometric calibration and measurement of deformable mirrors for adaptive optics are often performed on complex optical system with spider arms. The spider shadows may divide the mirror surface into separate islands on the detector, so the interferometer fails in reconnecting them to a common phase value. The calibration measurements then suffer from such artificial differential pistons across islands, which is converted into a wrong actuator command and in general into a poor calibration. We review the effects of spider arms shadowing as experienced during the optical calibration of large format adaptive mirrors, such as the Large Binocular Telescope and Very Large Telescope ones; we describe the procedures that we tested to cope with these issues and their effectiveness; and we present a laboratory assessment of the effect of such a shadowing with a dedicated test setup. Our work is part of a preparatory activity for the optical test of the European Extremely Large Telescope adaptive mirror M4.
- 1 April 2023
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 9 (02) , 029002-19
Open AccessOn the effects of spider-arms vignetting on interferometric measurements of deformable mirrors
The interferometric calibration and measurement of deformable mirrors for adaptive optics are often performed on complex optical system with spider arms. The spider shadows may divide the mirror surface into separate islands on the detector, so the interferometer fails in reconnecting them to a common phase value. The calibration measurements then suffer from such artificial differential pistons across islands, which is converted into a wrong actuator command and in general into a poor calibration. We review the effects of spider arms shadowing as experienced during the optical calibration of large format adaptive mirrors, such as the Large Binocular Telescope and Very Large Telescope ones; we describe the procedures that we tested to cope with these issues and their effectiveness; and we present a laboratory assessment of the effect of such a shadowing with a dedicated test setup. Our work is part of a preparatory activity for the optical test of the European Extremely Large Telescope adaptive mirror M4.
- Open Access
- 1 January 2023
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 9 (01) , 014001-11
Reliability, availability, and maintainability analysis of the Enhanced Resolution Imager and Spectrograph adaptive optics module and lesson learned before commissioning
Enhanced Resolution Imager and Spectrograph is an instrument currently under commissioning at the Cassegrain focus of the Very Large Telescope UT4. Its mission is to replace the suite of instruments NAOS-CONICA and SINFONI and push to the edge the capabilities of this 8-meter class telescope, by leveraging the adaptive optics module. The instrument has been designed for maximum lifetime and reliability and minimum downtime. We will present the instrument constraints and our approach to the reliability, availability, and maintainability (RAM) analysis. We identified the main actors in the system, then for each of them, we compiled a database of reliability parameters in order to build-up the reliability diagram, describing the failure sources. Starting from this information, we computed the system-wide reliability parameters and compared them with the requirements by the customer. Such a scheme is very general and may be taken as an example of RAM analysis for astronomical instrumentation; it may be also customized for the needs of other projects. In the end, we summarize the lessons learned.
- 1 January 2023
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 9 (01) , 014001-11
Open AccessReliability, availability, and maintainability analysis of the Enhanced Resolution Imager and Spectrograph adaptive optics module and lesson learned before commissioning
Enhanced Resolution Imager and Spectrograph is an instrument currently under commissioning at the Cassegrain focus of the Very Large Telescope UT4. Its mission is to replace the suite of instruments NAOS-CONICA and SINFONI and push to the edge the capabilities of this 8-meter class telescope, by leveraging the adaptive optics module. The instrument has been designed for maximum lifetime and reliability and minimum downtime. We will present the instrument constraints and our approach to the reliability, availability, and maintainability (RAM) analysis. We identified the main actors in the system, then for each of them, we compiled a database of reliability parameters in order to build-up the reliability diagram, describing the failure sources. Starting from this information, we computed the system-wide reliability parameters and compared them with the requirements by the customer. Such a scheme is very general and may be taken as an example of RAM analysis for astronomical instrumentation; it may be also customized for the needs of other projects. In the end, we summarize the lessons learned.
- 30 August 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12185, 1612-1621
Differential piston sensing with LIFT: application to the GMT
The Giant Magellan Telescope’s primary and deformable secondary mirror are each composed of 7 segments. The Natural Guide Star (NGS) wavefront sensor has the critical task to keep these 7 segments in phase in addition to the classical Adaptive Optics (AO) correction. The baseline defined several years ago has two pyramid wavefront sensors working in the visible. The first one is used to close the AO loop (main channel), but it is not sensitive to differential pistons that are multiples of its central wavelength (λ1), leading to segment ejections. The second pyramid, sensing at a slightly higher wavelength, is then used as a slow ”truth sensor” (2nd channel) to derive the sign of a segment ejection and correct it by steps of λ1. However, the robustness of this solution with respect to noise and turbulence conditions is not satisfying. We are now in a prototyping phase, for which the first step is to improve the baseline or find an alternative design for the 2nd channel in order to gain robustness. One of the potential solutions is LIFT, a focal-plane wavefront sensor. By making use of the sensor at two different wavelengths, it is possible to derive an unambiguous differential piston measurement. In this work, we describe our piston control strategy and show the results of end-to-end simulations comprising the full AO loop and the 2nd channel correction at the faint end of the NGS mode.
- 30 August 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12185, 1612-1621
Differential piston sensing with LIFT: application to the GMT
The Giant Magellan Telescope’s primary and deformable secondary mirror are each composed of 7 segments. The Natural Guide Star (NGS) wavefront sensor has the critical task to keep these 7 segments in phase in addition to the classical Adaptive Optics (AO) correction. The baseline defined several years ago has two pyramid wavefront sensors working in the visible. The first one is used to close the AO loop (main channel), but it is not sensitive to differential pistons that are multiples of its central wavelength (λ1), leading to segment ejections. The second pyramid, sensing at a slightly higher wavelength, is then used as a slow ”truth sensor” (2nd channel) to derive the sign of a segment ejection and correct it by steps of λ1. However, the robustness of this solution with respect to noise and turbulence conditions is not satisfying. We are now in a prototyping phase, for which the first step is to improve the baseline or find an alternative design for the 2nd channel in order to gain robustness. One of the potential solutions is LIFT, a focal-plane wavefront sensor. By making use of the sensor at two different wavelengths, it is possible to derive an unambiguous differential piston measurement. In this work, we describe our piston control strategy and show the results of end-to-end simulations comprising the full AO loop and the 2nd channel correction at the faint end of the NGS mode.
- 30 August 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12185, 361-376
Phasing the segmented Giant Magellan Telescope: progress in testbeds and prototypes
One of the greatest technical challenges of the doubly-segmented Giant Magellan Telescope is the accurate and stable control of segment piston in the diffraction limited observation mode. To address this challenge, in collaboration with the University of Arizona, Smithsonian Astrophysical Observatory and the Istituto Nazionale di Astrofisica, GMTO is executing a project to optimize and validate segment piston control strategies and algorithms using a pair of testbeds. The testbeds provide disturbances to simulate atmospheric turbulence and differential atmospheric dispersion. In addition to the phasing demonstration, the testbeds offer the opportunity to validate hardware designs for the Acquisition & Guiding Wavefront Sensor (AGWS) and the Natural Guide Star Wavefront Sensor (NGWS) and to mitigate their fabrication and assembly risks. Significant progress is reported in the design of the AGWS and NGWS prototypes as well as preliminary test results from the testbeds.
- 30 August 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12185, 361-376
Phasing the segmented Giant Magellan Telescope: progress in testbeds and prototypes
One of the greatest technical challenges of the doubly-segmented Giant Magellan Telescope is the accurate and stable control of segment piston in the diffraction limited observation mode. To address this challenge, in collaboration with the University of Arizona, Smithsonian Astrophysical Observatory and the Istituto Nazionale di Astrofisica, GMTO is executing a project to optimize and validate segment piston control strategies and algorithms using a pair of testbeds. The testbeds provide disturbances to simulate atmospheric turbulence and differential atmospheric dispersion. In addition to the phasing demonstration, the testbeds offer the opportunity to validate hardware designs for the Acquisition & Guiding Wavefront Sensor (AGWS) and the Natural Guide Star Wavefront Sensor (NGWS) and to mitigate their fabrication and assembly risks. Significant progress is reported in the design of the AGWS and NGWS prototypes as well as preliminary test results from the testbeds.
- 30 August 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12185, 1343-1360
NGWS-P: the natural guide star wavefront sensor prototype of the GMT single-conjugate AO system NGAO.
The Giant Magellan Telescope (GMT) Adaptive Optics (AO) systems feature a single conjugate natural guide star based AO system using the 7 deformable secondaries and a post focal wavefront sensor named NGWS (Natural Guide star Wavefront Sensor). The NGWS has two different channels: one featuring a high spatial sampling pyramid sensor dedicated to the fast frame rate correction of atmospheric turbulence and a second dedicated to the correct phasing of the 7 segments of the GMT telescope. The Arcetri AO group in collaboration with the GMT Organization (GMTO) and the University of Arizona (UA) is in charge of providing the design, fabrication and test of a prototype of the NGWS system that shall replicate all aspects of optical sensitivity including optical design, camera selection and data reduction. The prototype design starts from the baseline design for the NGWS that was provided by the Arcetri group in 2013. The prototype project Kick-off Meeting was held on April 16th 2021 and is foreseen to reach completion 34 months later. A first set of performance tests will be performed locally in Arcetri and the final prototype performance verification will happen at UA laboratories after installation of the unit on the High Contrast AO test bench developed by the AO group of UA. This final verification is scheduled for the summer of 2023. The paper reports about the prototype development work summarizing results of numerical simulation that lead to the chosen opto-mechanical design, main features and challenges of optical design for the two sensing channels.
- 30 August 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12185, 1343-1360
NGWS-P: the natural guide star wavefront sensor prototype of the GMT single-conjugate AO system NGAO.
The Giant Magellan Telescope (GMT) Adaptive Optics (AO) systems feature a single conjugate natural guide star based AO system using the 7 deformable secondaries and a post focal wavefront sensor named NGWS (Natural Guide star Wavefront Sensor). The NGWS has two different channels: one featuring a high spatial sampling pyramid sensor dedicated to the fast frame rate correction of atmospheric turbulence and a second dedicated to the correct phasing of the 7 segments of the GMT telescope. The Arcetri AO group in collaboration with the GMT Organization (GMTO) and the University of Arizona (UA) is in charge of providing the design, fabrication and test of a prototype of the NGWS system that shall replicate all aspects of optical sensitivity including optical design, camera selection and data reduction. The prototype design starts from the baseline design for the NGWS that was provided by the Arcetri group in 2013. The prototype project Kick-off Meeting was held on April 16th 2021 and is foreseen to reach completion 34 months later. A first set of performance tests will be performed locally in Arcetri and the final prototype performance verification will happen at UA laboratories after installation of the unit on the High Contrast AO test bench developed by the AO group of UA. This final verification is scheduled for the summer of 2023. The paper reports about the prototype development work summarizing results of numerical simulation that lead to the chosen opto-mechanical design, main features and challenges of optical design for the two sensing channels.