Tagir Karamov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tagir Karamov has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Elena Kozlova
Skolkovo Institute of Science and Technology
4 shared publications - Mikhail Spasennykh
Skolkovo Institute of Science and Technology
4 shared publications - Natalia Bogdanovich
Center for Hydrocarbon Recovery, Skolkovo Institute of Science and Technology, Bolshoy Boulevard 30, 121205 Moscow, Russia
4 shared publications - Alexey Cheremisin
Skolkovo Institute of Science and Technology, Moscow 143026, Russia
2 shared publications - Aliya Mukhametdinova
Skolkovo Institute of Science and Technology, Moscow 143026, Russia
2 shared publications - Andrey Voropaev
Hydroisotop GmbH, Woelkestr. 9, 85301 Schweitenkirchen, Germany
2 shared publications
Latest Publications
- Open Access
Alterations of Carbonate Mineral Matrix and Kerogen Micro-Structure in Domanik Organic-Rich Shale during Anhydrous Pyrolysis
The study of organic-rich carbonate-containing shales after heating is an important task for the effective application of in-situ thermal kerogen conversion technologies implemented for these types of rocks. This research was conducted to study changes in the rocks of the Domanik Formation after high-temperature treatment, taking into account the nature of structural changes at the micro level and chemical transformations in minerals. The sample of organic-rich carbonate-containing shales of the Domanik Formation was treated in stages in a pyrolizer in an inert atmosphere in the temperature range of 350–800 °C for 30 min at each temperature. By means of X-ray powder diffractometry (XRPD), HAWK pyrolysis, light and scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and computed micro-tomography, the characteristics of the rock before and after each heating stage were studied. The results showed significant alteration of the mineral matrix in the temperature range 600–800 °C, including the decomposition of minerals with the formation of new components, and structural alterations such as fracturing micropore formation. The organic matter (OM) was compacted at T = 350–400 °C and fractured. The evolution of void space includes fracture formation at the edges between rock components, both in organic matter and in minerals, as well as nanopore formation inside the carbonate mineral matrix. The results obtained show what processes at the microlevel can occur in carbonate-containing organic-rich shales under high-temperature treatment, and how these processes affect changes in the microstructure and pore space in the sample. These results are essential for modeling and the effective application of thermal EOR in organic-rich shales.
Open AccessAlterations of Carbonate Mineral Matrix and Kerogen Micro-Structure in Domanik Organic-Rich Shale during Anhydrous Pyrolysis
The study of organic-rich carbonate-containing shales after heating is an important task for the effective application of in-situ thermal kerogen conversion technologies implemented for these types of rocks. This research was conducted to study changes in the rocks of the Domanik Formation after high-temperature treatment, taking into account the nature of structural changes at the micro level and chemical transformations in minerals. The sample of organic-rich carbonate-containing shales of the Domanik Formation was treated in stages in a pyrolizer in an inert atmosphere in the temperature range of 350–800 °C for 30 min at each temperature. By means of X-ray powder diffractometry (XRPD), HAWK pyrolysis, light and scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and computed micro-tomography, the characteristics of the rock before and after each heating stage were studied. The results showed significant alteration of the mineral matrix in the temperature range 600–800 °C, including the decomposition of minerals with the formation of new components, and structural alterations such as fracturing micropore formation. The organic matter (OM) was compacted at T = 350–400 °C and fractured. The evolution of void space includes fracture formation at the edges between rock components, both in organic matter and in minerals, as well as nanopore formation inside the carbonate mineral matrix. The results obtained show what processes at the microlevel can occur in carbonate-containing organic-rich shales under high-temperature treatment, and how these processes affect changes in the microstructure and pore space in the sample. These results are essential for modeling and the effective application of thermal EOR in organic-rich shales.
- Open Access
Investigation of Source Rock Heating and Structural Changes in the Electromagnetic Fields Using Experimental and Mathematical Modeling
The paper presents the results of an experimental study of heating and the structural resultant changes of source rocks under the influence of the electromagnetic field in the microwave and radio-frequency ranges. The samples from the Bazhenov Formation (West Siberia, Russia) and the Domanic Formation (Ural, Russia) have been tested. It is shown that samples from these formations demonstrate very different heating rates at the same electromagnetic field parameters and the their heating rate depends on the type of the electromagnetic field (radio-frequency or microwave) applied. The temperature of the Bazhenov Formation samples reaches 300 °C within one hundred seconds of the microwave treatment but it slowly rises to 200 °C after twelve minutes of the radio-frequency influence. The samples of the carbonate Domanic Formation heat up more slowly in the microwave field (within two hundred seconds) and to lower temperatures in the radio-frequency (150 °C) than the Bazhenov Formation samples. The study of the structure of the samples before and after experiments on the electromagnetic treatment shows fracture formation during the heating process. Numerical simulations of heating dynamics of source rock samples have been based on a simple mathematical model of the electromagnetic influence and main features of heating for different types of source rock have been revealed. The opportunities for application of electromagnetic heating for oil source rock recovery are discussed.
Open AccessInvestigation of Source Rock Heating and Structural Changes in the Electromagnetic Fields Using Experimental and Mathematical Modeling
The paper presents the results of an experimental study of heating and the structural resultant changes of source rocks under the influence of the electromagnetic field in the microwave and radio-frequency ranges. The samples from the Bazhenov Formation (West Siberia, Russia) and the Domanic Formation (Ural, Russia) have been tested. It is shown that samples from these formations demonstrate very different heating rates at the same electromagnetic field parameters and the their heating rate depends on the type of the electromagnetic field (radio-frequency or microwave) applied. The temperature of the Bazhenov Formation samples reaches 300 °C within one hundred seconds of the microwave treatment but it slowly rises to 200 °C after twelve minutes of the radio-frequency influence. The samples of the carbonate Domanic Formation heat up more slowly in the microwave field (within two hundred seconds) and to lower temperatures in the radio-frequency (150 °C) than the Bazhenov Formation samples. The study of the structure of the samples before and after experiments on the electromagnetic treatment shows fracture formation during the heating process. Numerical simulations of heating dynamics of source rock samples have been based on a simple mathematical model of the electromagnetic influence and main features of heating for different types of source rock have been revealed. The opportunities for application of electromagnetic heating for oil source rock recovery are discussed.
- Open Access
- 24 August 2021
- Published by MDPI AG in Geosciences
- Vol. 11 (9) , 355
Pyrite Morphology and δ34S as Indicators of Deposition Environment in Organic-Rich Shales
This study is focused on the mineralogical, chemical, and isotopic characterization of pyrites from the rocks of the Bazhenov Formation (Upper Jurassic–Lower Cretaceous organic-rich shales, Western Siberia, Russia). Scanning electron microscopy (SEM) revealed pyrites of different morphologies: small and large framboids, small crystals, and large euhedral crystals; all morphotypes were usually combined into aggregates. Isotope ratio mass spectrometry (IRMS) and secondary ion mass spectrometry (SIMS) showed that small framboids and microcrystalline pyrite are isotopically light, with δ34SCDT varying from −55 to −20‰. Large framboids and euhedral crystals of pyrite are isotopically heavy with δ34SCDT up to +26‰. Both morphology and δ34S were suggested to be controlled by the redox conditions and sedimentation regime. The abundance of small framboids suggests that pyrite sedimentation occurred under anoxic conditions; the presence of the large framboids and euhedral crystals of pyrite suggest the accumulation of sediments occurred at suboxic conditions, possibly in the presence of oxygen.
- 24 August 2021
- Published by MDPI AG in Geosciences
- Vol. 11 (9) , 355
Open AccessPyrite Morphology and δ34S as Indicators of Deposition Environment in Organic-Rich Shales
This study is focused on the mineralogical, chemical, and isotopic characterization of pyrites from the rocks of the Bazhenov Formation (Upper Jurassic–Lower Cretaceous organic-rich shales, Western Siberia, Russia). Scanning electron microscopy (SEM) revealed pyrites of different morphologies: small and large framboids, small crystals, and large euhedral crystals; all morphotypes were usually combined into aggregates. Isotope ratio mass spectrometry (IRMS) and secondary ion mass spectrometry (SIMS) showed that small framboids and microcrystalline pyrite are isotopically light, with δ34SCDT varying from −55 to −20‰. Large framboids and euhedral crystals of pyrite are isotopically heavy with δ34SCDT up to +26‰. Both morphology and δ34S were suggested to be controlled by the redox conditions and sedimentation regime. The abundance of small framboids suggests that pyrite sedimentation occurred under anoxic conditions; the presence of the large framboids and euhedral crystals of pyrite suggest the accumulation of sediments occurred at suboxic conditions, possibly in the presence of oxygen.
- Open Access
- 30 July 2021
- Published by MDPI AG in Geosciences
- Vol. 11 (8) , 320
Upper Jurassic–Lower Cretaceous Source Rocks in the North of Western Siberia: Comprehensive Geochemical Characterization and Reconstruction of Paleo-Sedimentation Conditions
The present work is devoted to geochemical studies of the Bazhenov Formation in the north of the West Siberian Petroleum Basin. The object is the Upper Jurassic–Lower Cretaceous section, characterized by significant variations in total organic carbon content and petroleum generation potential of organic matter at the beginning of the oil window. The manuscript presents the integration of isotopic and geochemical analyses aimed at the evaluation of the genesis of the rocks in the peripheral part of the Bazhenov Sea and reconstruction of paleoenvironments that controlled the accumulation of organic matter in sediments, its composition and diagenetic alterations. According to the obtained data, the sediments were accumulated under marine conditions with a generally moderate and periodically increasing terrigenous influx. The variations in organic matter composition are determined by redox conditions and terrigenous input which correlate with the eustatic sea level changes during transgressive/regressive cycles and activation of currents. Transgression is associated with an intensive accumulation of organic matter under anoxic to euxinic conditions and insignificant influence of terrigenous sources, resulting in the formation of rocks with oil-generating properties. During the regression periods, the terrigenous sedimentation increased along with the dissolved oxygen concentration, and deposits with low organic matter content and gas-generating properties were formed.
- 30 July 2021
- Published by MDPI AG in Geosciences
- Vol. 11 (8) , 320
Open AccessUpper Jurassic–Lower Cretaceous Source Rocks in the North of Western Siberia: Comprehensive Geochemical Characterization and Reconstruction of Paleo-Sedimentation Conditions
The present work is devoted to geochemical studies of the Bazhenov Formation in the north of the West Siberian Petroleum Basin. The object is the Upper Jurassic–Lower Cretaceous section, characterized by significant variations in total organic carbon content and petroleum generation potential of organic matter at the beginning of the oil window. The manuscript presents the integration of isotopic and geochemical analyses aimed at the evaluation of the genesis of the rocks in the peripheral part of the Bazhenov Sea and reconstruction of paleoenvironments that controlled the accumulation of organic matter in sediments, its composition and diagenetic alterations. According to the obtained data, the sediments were accumulated under marine conditions with a generally moderate and periodically increasing terrigenous influx. The variations in organic matter composition are determined by redox conditions and terrigenous input which correlate with the eustatic sea level changes during transgressive/regressive cycles and activation of currents. Transgression is associated with an intensive accumulation of organic matter under anoxic to euxinic conditions and insignificant influence of terrigenous sources, resulting in the formation of rocks with oil-generating properties. During the regression periods, the terrigenous sedimentation increased along with the dissolved oxygen concentration, and deposits with low organic matter content and gas-generating properties were formed.
- Open Access
- 16 July 2021
- Published by MDPI AG in Geosciences
- Vol. 11 (7) , 295
Lithological and Geochemical Heterogeneity of the Organo-Mineral Matrix in Carbonate-Rich Shales
The paper discusses the issues of interaction of the organic matter and the siliceous-carbonate mineral matrix in unconventional reservoirs of the Upper Devonian Domanik Formation of the Upper Kama Depression of the Volga-Ural Basin. The Domanik Formation is composed of organic-rich low-permeability rocks. Lithological and geochemical peculiarities of rocks were studied using light microscopy, X-ray diffraction analysis (XRD), scanning electronic microscopy (SEM), and evaporation method. Organic matter was examined by the Rock-Eval pyrolysis with quantitative and qualitative evaluation of generation potential and maturity degree. Integrated analysis of results of lithological and geochemical studies allowed identifying intervals in the studied section where organic matter can form a complex association with the siliceous-carbonate matrix. It was fixed experimentally that in some cases the mineral carbonate matrix and the organic matter form a one-whole high-molecular compound. The authors supposed that in the course of sedimentation, organic matter is immobilized into the structure of the mineral carbonate matrix. At the deposition and diagenesis stage, the carbonate matter interacts with acids of the organic matter and forms natural organo-mineral polymers. Special physicochemical properties of such organo-mineral associations shed new light onto the problems of producing from hard-to-develop nonconventional carbonate reservoirs and evaluating the associated risks.
- 16 July 2021
- Published by MDPI AG in Geosciences
- Vol. 11 (7) , 295
Open AccessLithological and Geochemical Heterogeneity of the Organo-Mineral Matrix in Carbonate-Rich Shales
The paper discusses the issues of interaction of the organic matter and the siliceous-carbonate mineral matrix in unconventional reservoirs of the Upper Devonian Domanik Formation of the Upper Kama Depression of the Volga-Ural Basin. The Domanik Formation is composed of organic-rich low-permeability rocks. Lithological and geochemical peculiarities of rocks were studied using light microscopy, X-ray diffraction analysis (XRD), scanning electronic microscopy (SEM), and evaporation method. Organic matter was examined by the Rock-Eval pyrolysis with quantitative and qualitative evaluation of generation potential and maturity degree. Integrated analysis of results of lithological and geochemical studies allowed identifying intervals in the studied section where organic matter can form a complex association with the siliceous-carbonate matrix. It was fixed experimentally that in some cases the mineral carbonate matrix and the organic matter form a one-whole high-molecular compound. The authors supposed that in the course of sedimentation, organic matter is immobilized into the structure of the mineral carbonate matrix. At the deposition and diagenesis stage, the carbonate matter interacts with acids of the organic matter and forms natural organo-mineral polymers. Special physicochemical properties of such organo-mineral associations shed new light onto the problems of producing from hard-to-develop nonconventional carbonate reservoirs and evaluating the associated risks.
- Open Access
- 18 December 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (24) , 9065
Effect of Thermal Exposure on Oil Shale Saturation and Reservoir Properties
The experimental and numerical modeling of thermal enhanced oil recovery (EOR) requires a detailed laboratory analysis of core properties influenced by thermal exposure. To acquire the robust knowledge on the change in rock saturation and reservoir properties, the fastest way is to examine the rock samples before and after combustion. In the current paper, we studied the shale rock properties, such as core saturation, porosity, and permeability, organic matter content of the rock caused by the combustion front propagation within the experimental modeling of the high-pressure air injection. The study was conducted on Bazhenov shale formation rock samples. We reported the results on porosity and permeability evolution, which was obtained by the gas pressure-decay technique. The measurements revealed a significant increase of porosity (on average, for 9 abs. % of porosity) and permeability (on average, for 1 mD) of core samples after the combustion tube experiment. The scanning electron microscopy showed the changes induced by thermal exposure: the transformation of organic matter with and the formation of new voids and micro and nanofractures in the mineral matrix. Low-field Nuclear Magnetic Resonance (NMR) was chosen as a primary non-disruptive tool for measuring the saturation of core samples in ambient conditions. NMR T1–T2 maps were interpreted to determine the rock fluid categories (bitumen and adsorbed oil, structural and adsorbed water, and mobile oil) before and after the combustion experiment. Changes in the distribution of organic matter within the core sample were examined using 2D Rock-Eval pyrolysis technique. Results demonstrated the relatively uniform distribution of OM inside the core plugs after the combustion.
- 18 December 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (24) , 9065
Open AccessEffect of Thermal Exposure on Oil Shale Saturation and Reservoir Properties
The experimental and numerical modeling of thermal enhanced oil recovery (EOR) requires a detailed laboratory analysis of core properties influenced by thermal exposure. To acquire the robust knowledge on the change in rock saturation and reservoir properties, the fastest way is to examine the rock samples before and after combustion. In the current paper, we studied the shale rock properties, such as core saturation, porosity, and permeability, organic matter content of the rock caused by the combustion front propagation within the experimental modeling of the high-pressure air injection. The study was conducted on Bazhenov shale formation rock samples. We reported the results on porosity and permeability evolution, which was obtained by the gas pressure-decay technique. The measurements revealed a significant increase of porosity (on average, for 9 abs. % of porosity) and permeability (on average, for 1 mD) of core samples after the combustion tube experiment. The scanning electron microscopy showed the changes induced by thermal exposure: the transformation of organic matter with and the formation of new voids and micro and nanofractures in the mineral matrix. Low-field Nuclear Magnetic Resonance (NMR) was chosen as a primary non-disruptive tool for measuring the saturation of core samples in ambient conditions. NMR T1–T2 maps were interpreted to determine the rock fluid categories (bitumen and adsorbed oil, structural and adsorbed water, and mobile oil) before and after the combustion experiment. Changes in the distribution of organic matter within the core sample were examined using 2D Rock-Eval pyrolysis technique. Results demonstrated the relatively uniform distribution of OM inside the core plugs after the combustion.
- Open Access
Reservoir Properties of Low-Permeable Carbonate Rocks: Experimental Features
This paper presents an integrated petrophysical characterization of a representative set of complex carbonate reservoir rock samples with a porosity of less than 3% and permeability of less than 1 mD. Laboratory methods used in this study included both bulk measurements and multiscale void space characterization. Bulk techniques included gas volumetric nuclear magnetic resonance (NMR), liquid saturation (LS), porosity, pressure-pulse decay (PDP), and pseudo-steady-state permeability (PSS). Imaging consisted of thin-section petrography, computed X-ray macro- and microtomography, and scanning electron microscopy (SEM). Mercury injection capillary pressure (MICP) porosimetry was a proxy technique between bulk measurements and imaging. The target set of rock samples included whole cores, core plugs, mini cores, rock chips, and crushed rock. The research yielded several findings for the target rock samples. NMR was the most appropriate technique for total porosity determination. MICP porosity matched both NMR and imaging results and highlighted the different effects of solvent extraction on throat size distribution. PDP core-plug gas permeability measurements were consistent but overestimated in comparison to PSS results, with the difference reaching two orders of magnitude. SEM proved to be the only feasible method for void-scale imaging with a spatial resolution up to 5 nm. The results confirmed the presence of natural voids of two major types. The first type was organic matter (OM)-hosted pores, with dimensions of less than 500 nm. The second type was sporadic voids in the mineral matrix (biogenic clasts), rarely larger than 250 nm. Comparisons between whole-core and core-plug reservoir properties showed substantial differences in both porosity (by a factor of 2) and permeability (up to 4 orders of magnitude) caused by spatial heterogeneity and scaling.
Open AccessReservoir Properties of Low-Permeable Carbonate Rocks: Experimental Features
This paper presents an integrated petrophysical characterization of a representative set of complex carbonate reservoir rock samples with a porosity of less than 3% and permeability of less than 1 mD. Laboratory methods used in this study included both bulk measurements and multiscale void space characterization. Bulk techniques included gas volumetric nuclear magnetic resonance (NMR), liquid saturation (LS), porosity, pressure-pulse decay (PDP), and pseudo-steady-state permeability (PSS). Imaging consisted of thin-section petrography, computed X-ray macro- and microtomography, and scanning electron microscopy (SEM). Mercury injection capillary pressure (MICP) porosimetry was a proxy technique between bulk measurements and imaging. The target set of rock samples included whole cores, core plugs, mini cores, rock chips, and crushed rock. The research yielded several findings for the target rock samples. NMR was the most appropriate technique for total porosity determination. MICP porosity matched both NMR and imaging results and highlighted the different effects of solvent extraction on throat size distribution. PDP core-plug gas permeability measurements were consistent but overestimated in comparison to PSS results, with the difference reaching two orders of magnitude. SEM proved to be the only feasible method for void-scale imaging with a spatial resolution up to 5 nm. The results confirmed the presence of natural voids of two major types. The first type was organic matter (OM)-hosted pores, with dimensions of less than 500 nm. The second type was sporadic voids in the mineral matrix (biogenic clasts), rarely larger than 250 nm. Comparisons between whole-core and core-plug reservoir properties showed substantial differences in both porosity (by a factor of 2) and permeability (up to 4 orders of magnitude) caused by spatial heterogeneity and scaling.