Qianhong Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qianhong Zhou has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Qiang Sun
Hefei University of Technology
16 shared publications - Wei Yang
Institute of Applied Physics and Computational Mathematics, Beijing 100094, People’s Republic of China
16 shared publications Ye Dong
Institute of Applied Physics and Computational Mathematics Beijing People's Republic of China
16 shared publications- Hantian Zhang
Institute of Applied Physics and Computational Mathematics, Beijing 100094, People’s Republic of China
14 shared publications - Mengmeng Song
Institute of Applied Physics and Computational Mathematics, Beijing 100094, People’s Republic of China
10 shared publications Qiang Sun
9 shared publications
Latest Publications
- Open Access
- 20 November 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 67 (2) , 026002
A fully electromagnetic hybrid PIC-fluid model for predictive fusion neutron yield in dense plasma focus
A fully electromagnetic hybrid ion-PIC/electron-fluid framework is developed for the implosion-to-pinch phase of dense plasma focus (DPF) discharges. Ions are advanced kinetically, electrons form a charge-neutralizing fluid under the quasi-neutral approximation, and the full Maxwell equations are solved in both plasma and vacuum. The generalized Ohm law includes resistive, electron pressure-gradient, and Hall terms. Applied to a non-hollow 180 kA geometry initialized from a pre-ionized end-of-rundown state, the framework reproduces the axial rundown, radial compression, and pinch stages. The sheath front trajectory agrees with fully kinetic benchmarks within 10%, and a pinch-radius comparison captures the radial collapse. A beam-target neutron diagnostic applied to the simulated ion distribution gives a yield of 0.296 × 10 7 , at the same scale as the fully kinetic reference. The ion spectrum develops a non-Maxwellian suprathermal tail to about 0.25 MeV. The yield remains sensitive to the electron-temperature closure and anode geometry. The framework captures relevant macroscopic observables and ion-kinetic diagnostics at a computational cost roughly 10 5 – 10 6 times lower than comparable fully kinetic electromagnetic PIC simulations.
- 20 November 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 67 (2) , 026002
Open AccessA fully electromagnetic hybrid PIC-fluid model for predictive fusion neutron yield in dense plasma focus
A fully electromagnetic hybrid ion-PIC/electron-fluid framework is developed for the implosion-to-pinch phase of dense plasma focus (DPF) discharges. Ions are advanced kinetically, electrons form a charge-neutralizing fluid under the quasi-neutral approximation, and the full Maxwell equations are solved in both plasma and vacuum. The generalized Ohm law includes resistive, electron pressure-gradient, and Hall terms. Applied to a non-hollow 180 kA geometry initialized from a pre-ionized end-of-rundown state, the framework reproduces the axial rundown, radial compression, and pinch stages. The sheath front trajectory agrees with fully kinetic benchmarks within 10%, and a pinch-radius comparison captures the radial collapse. A beam-target neutron diagnostic applied to the simulated ion distribution gives a yield of 0.296 × 10 7 , at the same scale as the fully kinetic reference. The ion spectrum develops a non-Maxwellian suprathermal tail to about 0.25 MeV. The yield remains sensitive to the electron-temperature closure and anode geometry. The framework captures relevant macroscopic observables and ion-kinetic diagnostics at a computational cost roughly 10 5 – 10 6 times lower than comparable fully kinetic electromagnetic PIC simulations.
- 1 November 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (11) , 115010
Three-dimensional particle-fluid hybrid simulation of multi-cathode-spot jet mixing and ion separation in vacuum arcs
Supersonic plasma jets generated by multi-component cathodes in vacuum arcs critically influence the breaking capacity of high-voltage vacuum circuit breakers and the beam quality of metal ion sources, yet the underlying ion separation mechanisms during jet mixing remain poorly resolved by existing models. While three-dimensional (3D) particle-fluid hybrid frameworks under the Darwin approximation have been established for vacuum arc simulations, most prior studies neglect strong ion–ion Coulomb collisions in the high-density jet core, which are essential for accurate description of multi-component transport and separation. In this work, we extend this established 3D hybrid framework by incorporating Monte Carlo algorithm for ion collisions, and systematically evaluate spatiotemporal step constraints for highly collisional jet simulations: the minimum spatiotemporal step size should satisfy the ion collision mean free path (∼ μ m) and the resulting time step limit (∼10 −14 s). Finally, numerical simulations are carried out for the multi-cathode spot jet process of ZrD vacuum arcs. Simulations reveal that kinetic energy thermalization in the mixing zone is the fundamental driver of light-heavy ion separation: light D ions acquire higher thermal velocities due to mass effects, forming a wide-angle background halo, while heavy Zr ions retain an inertia-dominated central beam. The simulated angular flux distributions and ion kinetic energy peaks (∼100 eV for Zr, ∼7 eV for D) are in good agreement with time-of-flight experimental measurements. This work provides a physically robust kinetic simulation tool for elucidating multi-component vacuum arc jet mixing mechanisms and optimizing the performance of vacuum arc-based devices.
- 1 November 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (11) , 115010
Three-dimensional particle-fluid hybrid simulation of multi-cathode-spot jet mixing and ion separation in vacuum arcs
Supersonic plasma jets generated by multi-component cathodes in vacuum arcs critically influence the breaking capacity of high-voltage vacuum circuit breakers and the beam quality of metal ion sources, yet the underlying ion separation mechanisms during jet mixing remain poorly resolved by existing models. While three-dimensional (3D) particle-fluid hybrid frameworks under the Darwin approximation have been established for vacuum arc simulations, most prior studies neglect strong ion–ion Coulomb collisions in the high-density jet core, which are essential for accurate description of multi-component transport and separation. In this work, we extend this established 3D hybrid framework by incorporating Monte Carlo algorithm for ion collisions, and systematically evaluate spatiotemporal step constraints for highly collisional jet simulations: the minimum spatiotemporal step size should satisfy the ion collision mean free path (∼ μ m) and the resulting time step limit (∼10 −14 s). Finally, numerical simulations are carried out for the multi-cathode spot jet process of ZrD vacuum arcs. Simulations reveal that kinetic energy thermalization in the mixing zone is the fundamental driver of light-heavy ion separation: light D ions acquire higher thermal velocities due to mass effects, forming a wide-angle background halo, while heavy Zr ions retain an inertia-dominated central beam. The simulated angular flux distributions and ion kinetic energy peaks (∼100 eV for Zr, ∼7 eV for D) are in good agreement with time-of-flight experimental measurements. This work provides a physically robust kinetic simulation tool for elucidating multi-component vacuum arc jet mixing mechanisms and optimizing the performance of vacuum arc-based devices.
- Open Access
- 26 August 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Space Physics
- Vol. 131 (8)
Analytical Study of Energy Coupling Efficiency Between Explosive Debris Plasma and Magnetized Ambient Plasma
High‐altitude nuclear explosions (HANES) and space plasma events generate super‐Alfvénic expanding plasma that rapidly expands into the magnetized ambient plasma, transferring energy through collisionless electromagnetic interactions. The energy coupling efficiency between the debris and ambient plasmas is a critical factor governing the scale of magnetic cavities, the emergence of shock structures, and the plasma distributions. However, existing coupling criteria lack a unified quantitative formulation and provide limited insight into the spatial distribution of coupling efficiency. In this study, we derive an analytical expression that quantitatively describes the coupling efficiency under the Larmor coupling mechanism by analyzing the interaction scales for energy transfer. The analytical results demonstrate good agreement with the three‐dimensional hybrid simulations. These findings provide a clear theoretical basis for evaluating the energy coupling efficiency and its spatial distribution during the expansion of super‐Alfvénic debris plasma, facilitating further parameter assessments in space plasma research.
- 26 August 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Space Physics
- Vol. 131 (8)
Open AccessAnalytical Study of Energy Coupling Efficiency Between Explosive Debris Plasma and Magnetized Ambient Plasma
High‐altitude nuclear explosions (HANES) and space plasma events generate super‐Alfvénic expanding plasma that rapidly expands into the magnetized ambient plasma, transferring energy through collisionless electromagnetic interactions. The energy coupling efficiency between the debris and ambient plasmas is a critical factor governing the scale of magnetic cavities, the emergence of shock structures, and the plasma distributions. However, existing coupling criteria lack a unified quantitative formulation and provide limited insight into the spatial distribution of coupling efficiency. In this study, we derive an analytical expression that quantitatively describes the coupling efficiency under the Larmor coupling mechanism by analyzing the interaction scales for energy transfer. The analytical results demonstrate good agreement with the three‐dimensional hybrid simulations. These findings provide a clear theoretical basis for evaluating the energy coupling efficiency and its spatial distribution during the expansion of super‐Alfvénic debris plasma, facilitating further parameter assessments in space plasma research.
- 21 May 2026
- Published by Springer Nature in Science China Earth Sciences
- Vol. 69 (6) , 2217-2225
Simulation study of a potential driver for azimuthal diffusion in artificial radiation belts
- 21 May 2026
- Published by Springer Nature in Science China Earth Sciences
- Vol. 69 (6) , 2217-2225
Simulation study of a potential driver for azimuthal diffusion in artificial radiation belts
- 23 April 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (5)
Analysis of electron power absorption and loss mechanisms in the discharge chamber of air-breathing radio-frequency ion thruster
In recent years, very low Earth orbit (VLEO) has attracted growing interest for enabling higher-resolution Earth observation, shorter communication delays, and reduced launch costs. Air-breathing electric propulsion (ABEP), which employs upper atmospheric gas as propellant, has become a research hotspot. To investigate electron power absorption and loss mechanisms in an air-breathing radio-frequency (RF) ion thruster and improve ionization efficiency, a two-dimensional axisymmetric PIC-MCC simulation of the RIT-10 thruster was performed. Results show that increasing RF power enhances electron energy absorption and average energy. At low pressures, however, the reduced electron–neutral collision frequency relative to the coil frequency induces a large phase difference between the inductive field and electron current, leading to negative power absorption. Power loss analysis indicates that higher RF power increases losses through high-level excitation, ionization, and dissociation, while reducing low-level excitation. Comparisons between oxygen and nitrogen systems reveal that oxygen achieves superior ionization efficiency, with energy mainly lost via dissociation and ionization, whereas nitrogen predominantly loses energy through excitation. The ion beam consists mainly of N₂⁺ and O⁺. With increasing RF power, N₂⁺ production strengthens, raising its fraction from 32.82% to 37.25% while reducing O⁺ from 42.48% to 32.11%. Consequently, mass utilization and thrust efficiencies improve markedly, from 8.83% and 6.35% to 28.93% and 22.27%. These findings clarify key operational mechanisms of VLEO ABEP thrusters.
- 23 April 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (5)
Analysis of electron power absorption and loss mechanisms in the discharge chamber of air-breathing radio-frequency ion thruster
In recent years, very low Earth orbit (VLEO) has attracted growing interest for enabling higher-resolution Earth observation, shorter communication delays, and reduced launch costs. Air-breathing electric propulsion (ABEP), which employs upper atmospheric gas as propellant, has become a research hotspot. To investigate electron power absorption and loss mechanisms in an air-breathing radio-frequency (RF) ion thruster and improve ionization efficiency, a two-dimensional axisymmetric PIC-MCC simulation of the RIT-10 thruster was performed. Results show that increasing RF power enhances electron energy absorption and average energy. At low pressures, however, the reduced electron–neutral collision frequency relative to the coil frequency induces a large phase difference between the inductive field and electron current, leading to negative power absorption. Power loss analysis indicates that higher RF power increases losses through high-level excitation, ionization, and dissociation, while reducing low-level excitation. Comparisons between oxygen and nitrogen systems reveal that oxygen achieves superior ionization efficiency, with energy mainly lost via dissociation and ionization, whereas nitrogen predominantly loses energy through excitation. The ion beam consists mainly of N₂⁺ and O⁺. With increasing RF power, N₂⁺ production strengthens, raising its fraction from 32.82% to 37.25% while reducing O⁺ from 42.48% to 32.11%. Consequently, mass utilization and thrust efficiencies improve markedly, from 8.83% and 6.35% to 28.93% and 22.27%. These findings clarify key operational mechanisms of VLEO ABEP thrusters.
- 17 March 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (15)
Theoretical Investigation of the Transition Conditions between Cathode and Anode Breakdown in Vacuum Arcs
This study focuses on the transition conditions between cathode-dominated and anode-dominated breakdown in vacuum arcs, which are crucial for optimizing the stability and service life of anode vacuum arc sources applied in thin-film deposition. We integrate thermal conduction and Fowler-Nordheim emission theories to develop analytical models for cathode breakdown delay time, which are applicable to ultra-short, finite, and long leading-edge time pulse regimes. We also establish an anode breakdown delay time model incorporating electron trajectory diffusion. Our findings reveal that breakdown dynamics are jointly governed by material properties, pulse parameters, and electrode geometry: cathode breakdown is driven by Joule heating at micro-protrusions, with field-enhanced emission reducing the breakdown delay exponentially. In contrast, anode breakdown, driven by the bombardment heating from electron emission at micro-protrusions, scales as E_c^(-6), exhibiting the strongest dependence on the cathode field. Among Al, Mo, Cu, and 304 stainless steels, Al shows an anode breakdown delay time two orders of magnitude shorter than the other three materials, an advantage attributed to its low work function and favorable thermal properties. Additionally, the breakdown time ratio τ=t_dc1⁄t_da (cathode/anode critical breakdown delay times) can characterize the transition from cathode-dominated to anode-dominated breakdown, and this ratio is regulated by the macro-electric field, cathode tip radius, and protrusion morphology (e.g., conical and cylindrical tips). In this work, the investigated cathode micro-protrusions have a tip radius of 10⁻⁷~10⁻⁶ m and a height of 5 μm, with the electrode gap ranging from 10⁻4 to 10⁻3 m, which matches the practical application of anode vacuum arc ion sources. The proposed models are validated against experimental results. These findings provide essential guidance for optimizing electrode materials, and microstructures to precisely control the breakdown transition.
- 17 March 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (15)
Theoretical Investigation of the Transition Conditions between Cathode and Anode Breakdown in Vacuum Arcs
This study focuses on the transition conditions between cathode-dominated and anode-dominated breakdown in vacuum arcs, which are crucial for optimizing the stability and service life of anode vacuum arc sources applied in thin-film deposition. We integrate thermal conduction and Fowler-Nordheim emission theories to develop analytical models for cathode breakdown delay time, which are applicable to ultra-short, finite, and long leading-edge time pulse regimes. We also establish an anode breakdown delay time model incorporating electron trajectory diffusion. Our findings reveal that breakdown dynamics are jointly governed by material properties, pulse parameters, and electrode geometry: cathode breakdown is driven by Joule heating at micro-protrusions, with field-enhanced emission reducing the breakdown delay exponentially. In contrast, anode breakdown, driven by the bombardment heating from electron emission at micro-protrusions, scales as E_c^(-6), exhibiting the strongest dependence on the cathode field. Among Al, Mo, Cu, and 304 stainless steels, Al shows an anode breakdown delay time two orders of magnitude shorter than the other three materials, an advantage attributed to its low work function and favorable thermal properties. Additionally, the breakdown time ratio τ=t_dc1⁄t_da (cathode/anode critical breakdown delay times) can characterize the transition from cathode-dominated to anode-dominated breakdown, and this ratio is regulated by the macro-electric field, cathode tip radius, and protrusion morphology (e.g., conical and cylindrical tips). In this work, the investigated cathode micro-protrusions have a tip radius of 10⁻⁷~10⁻⁶ m and a height of 5 μm, with the electrode gap ranging from 10⁻4 to 10⁻3 m, which matches the practical application of anode vacuum arc ion sources. The proposed models are validated against experimental results. These findings provide essential guidance for optimizing electrode materials, and microstructures to precisely control the breakdown transition.
- 14 January 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Space Physics
- Vol. 131 (1)
Transition of Ambient Ions Motion Toward Field Alignment During Debris Plasma Expansion
A high‐altitude nuclear explosion (HANE) can transport plasma along geomagnetic field lines into distant regions, directly impacting the formation of artificial radiation belts and the regions of energy deposition. However, the early stage dynamics of ambient ion motion transition to field alignment remain poorly understood. In this paper, a two‐dimensional hybrid model in the field‐parallel plane is employed to analyze the dynamics of debris and ambient ions, with particular focus on the transition of ambient ions to field‐aligned motion. The simulations reveal that while debris ions expand nearly linearly, ambient ions are accelerated across the magnetic‐compression region perpendicularly within a single gyro‐period and then transition toward the geomagnetic field‐aligned motion. These transitions result from changes in the magnetic field direction at the boundary of the magnetic‐compression region. This process requires efficient energy transfer from debris to the ambient plasma. Through a series of simulations, we delineate the regime dependence of this transition using a dimensionless parameter and quantify the fraction of ambient ions streaming along geomagnetic field lines. In the simulations, under the condition in two‐dimensional simulations, more than 20% of ambient ions achieve field‐aligned velocities exceeding the initial debris expansion speed. This study clarifies the physical origin and parameter dependence of ambient‐ion field‐aligned transport, providing new insights into plasma distribution following HANE events.
- 14 January 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Space Physics
- Vol. 131 (1)
Transition of Ambient Ions Motion Toward Field Alignment During Debris Plasma Expansion
A high‐altitude nuclear explosion (HANE) can transport plasma along geomagnetic field lines into distant regions, directly impacting the formation of artificial radiation belts and the regions of energy deposition. However, the early stage dynamics of ambient ion motion transition to field alignment remain poorly understood. In this paper, a two‐dimensional hybrid model in the field‐parallel plane is employed to analyze the dynamics of debris and ambient ions, with particular focus on the transition of ambient ions to field‐aligned motion. The simulations reveal that while debris ions expand nearly linearly, ambient ions are accelerated across the magnetic‐compression region perpendicularly within a single gyro‐period and then transition toward the geomagnetic field‐aligned motion. These transitions result from changes in the magnetic field direction at the boundary of the magnetic‐compression region. This process requires efficient energy transfer from debris to the ambient plasma. Through a series of simulations, we delineate the regime dependence of this transition using a dimensionless parameter and quantify the fraction of ambient ions streaming along geomagnetic field lines. In the simulations, under the condition in two‐dimensional simulations, more than 20% of ambient ions achieve field‐aligned velocities exceeding the initial debris expansion speed. This study clarifies the physical origin and parameter dependence of ambient‐ion field‐aligned transport, providing new insights into plasma distribution following HANE events.
- 13 January 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (2) , 025217
Experimental study on the formation of triggered vacuum discharge anodic arc
The anodic arc of vacuum discharge can generate ion beams with relatively high density, which exhibits unique advantages and broad application prospects in the field of material processing. However, the generation of traditional anodic arcs is often constrained by conditions such as kA-level high current, sub-millimeter short gap, sub-millimeter anode size, and low-melting-point materials like aluminum. This study proposes an effective formation method for vacuum anodic arcs: by combining the pre-ionization effect of triggering with the discharge of the main circuit, an anodic arc for high-melting-point metals like titanium is realized. The results indicate that with triggering-induced pre-ionization, a reasonable combination of titanium anode parameters—including a main circuit breakdown voltage of 8–15 kV, an electrode gap of 4–10 mm, and an anode size of 1–3 mm—achieves a microsecond-level ( μ s) pulsed anodic arc. Under the same trigger current and anode size, the anodic arc intensity increases significantly with the increase in electrode gap; with the same electrode gap and anode size, it increases significantly as the trigger current decreases; and when the trigger current and electrode gap remain unchanged, it weakens rapidly with the increase in anode size. Studies on the influence of discharge and structural parameters on the anodic arc indicate that the power density deposited on the anode during the high-voltage discharge stage is the key parameter determining arc generation. Based on the experimental results, the order of magnitude of the power density required is estimated to be 10 10 W m −2 . This study can provide a reference for the design of vacuum anodic arcs devices.
- 13 January 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (2) , 025217
Experimental study on the formation of triggered vacuum discharge anodic arc
The anodic arc of vacuum discharge can generate ion beams with relatively high density, which exhibits unique advantages and broad application prospects in the field of material processing. However, the generation of traditional anodic arcs is often constrained by conditions such as kA-level high current, sub-millimeter short gap, sub-millimeter anode size, and low-melting-point materials like aluminum. This study proposes an effective formation method for vacuum anodic arcs: by combining the pre-ionization effect of triggering with the discharge of the main circuit, an anodic arc for high-melting-point metals like titanium is realized. The results indicate that with triggering-induced pre-ionization, a reasonable combination of titanium anode parameters—including a main circuit breakdown voltage of 8–15 kV, an electrode gap of 4–10 mm, and an anode size of 1–3 mm—achieves a microsecond-level ( μ s) pulsed anodic arc. Under the same trigger current and anode size, the anodic arc intensity increases significantly with the increase in electrode gap; with the same electrode gap and anode size, it increases significantly as the trigger current decreases; and when the trigger current and electrode gap remain unchanged, it weakens rapidly with the increase in anode size. Studies on the influence of discharge and structural parameters on the anodic arc indicate that the power density deposited on the anode during the high-voltage discharge stage is the key parameter determining arc generation. Based on the experimental results, the order of magnitude of the power density required is estimated to be 10 10 W m −2 . This study can provide a reference for the design of vacuum anodic arcs devices.
- 1 January 2026
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 75 (20)
Numerical simulation study on gas switch electrode ablation under plasma-electrode interaction
气体开关是脉冲功率装置的核心部件,在核聚变、粒子加速器、电真空等领域发挥着不可替代的作用。然而,电极烧蚀会导致开关击穿电压降低、触发抖动增大及寿命缩短,已成为制约气体开关发展的瓶颈问题。尽管国内外已针对电极烧蚀开展了广泛的数值研究,但其模拟仍面临两大技术难点:等离子体-电极相互作用以及固-液-气-等离子体的快速相变。为此,本文基于气体开关的电极烧蚀过程,建立了等离子体-电极相互作用下的多相流电极烧蚀模型,以研究阴极的加热、熔化和运动过程。研究主要从三个方面展开:电极烧蚀的物理过程、等离子体参数对烧蚀的影响以及电极参数对烧蚀的影响。具体而言:(1)研究表明电极烧蚀物理过程的主要因素为电子热场发射和离子轰击,其中电子热场发射决定了电极表面电流密度分布,而离子轰击则决定了电极表面能量和压力传递;(2)通过模拟和理论研究,得到了等离子体参数对电极烧蚀的影响规律,电极烧蚀程度与等离子体区域的电子温度和离子数密度成正相关;(3)针对电极参数对烧蚀的影响作用,通过理论推导,得到有关电极参数与电极烧蚀的定量关系,提出了新的抗烧蚀常数,能够用来指导实验设计。本文的创新在于建立了等离子体-电极相互作用下的多相流电极烧蚀模型,揭示了能量转换与相变传热传质的耦合机制,并提出了新的抗烧蚀常数。本文的研究为评估电极烧蚀对气体开关的影响提供了一种定量的研究方法,有助于提高气体开关的绝缘性能。
- 1 January 2026
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 75 (20)
Numerical simulation study on gas switch electrode ablation under plasma-electrode interaction
气体开关是脉冲功率装置的核心部件,在核聚变、粒子加速器、电真空等领域发挥着不可替代的作用。然而,电极烧蚀会导致开关击穿电压降低、触发抖动增大及寿命缩短,已成为制约气体开关发展的瓶颈问题。尽管国内外已针对电极烧蚀开展了广泛的数值研究,但其模拟仍面临两大技术难点:等离子体-电极相互作用以及固-液-气-等离子体的快速相变。为此,本文基于气体开关的电极烧蚀过程,建立了等离子体-电极相互作用下的多相流电极烧蚀模型,以研究阴极的加热、熔化和运动过程。研究主要从三个方面展开:电极烧蚀的物理过程、等离子体参数对烧蚀的影响以及电极参数对烧蚀的影响。具体而言:(1)研究表明电极烧蚀物理过程的主要因素为电子热场发射和离子轰击,其中电子热场发射决定了电极表面电流密度分布,而离子轰击则决定了电极表面能量和压力传递;(2)通过模拟和理论研究,得到了等离子体参数对电极烧蚀的影响规律,电极烧蚀程度与等离子体区域的电子温度和离子数密度成正相关;(3)针对电极参数对烧蚀的影响作用,通过理论推导,得到有关电极参数与电极烧蚀的定量关系,提出了新的抗烧蚀常数,能够用来指导实验设计。本文的创新在于建立了等离子体-电极相互作用下的多相流电极烧蚀模型,揭示了能量转换与相变传热传质的耦合机制,并提出了新的抗烧蚀常数。本文的研究为评估电极烧蚀对气体开关的影响提供了一种定量的研究方法,有助于提高气体开关的绝缘性能。
- 18 December 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (1)
A numerical analysis of the mechanism of anode spot generation in short-gap vacuum arc discharges
Anode vacuum arc ion sources play a crucial role in electric propulsion and thin-film deposition systems. Short electrode gaps facilitate the transition of anode vacuum arc discharge modes, but insufficient understanding of anode spot formation mechanisms limits device performance improvement. This study established a plasma-sheath-anode coupling theoretical model by analyzing anode surface temperature variations during short-gap vacuum arc discharges, revealing the mechanism of anode spot formation. The results demonstrated that the transition in anode spot formation mechanism is closely related to the breakdown delay time. With a short breakdown delay time, electrons from the cathode thermo-field emission heat the anode under the gap electric field, but their heating energy is insufficient to cause a significant rise in the anode surface temperature. At this stage, cathode plasma is generated. The electrons from this plasma then become the dominant heat source, heating a limited anode region and leading to intense local vaporization, thereby forming an anode spot. With a long breakdown delay time, the energy flux density from cathode-emitted electrons increases significantly, causing anode surface temperature to rapidly rise and spot formation. Subsequently, impact ionization occurs between electrons and evaporated metal atoms, generating anode plasma that expands toward the cathode. The anode plasma electrons then dominate the anode heating process, sustaining the anode spot until discharge termination. Furthermore, this study also observed that titanium electrodes—with lower thermal conductivity than aluminum electrodes—exhibit a higher tendency for anode spot formation. These findings provide important theoretical guidance for optimizing anode vacuum arc ion source designs and enhancing operational efficiency.
- 18 December 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (1)
A numerical analysis of the mechanism of anode spot generation in short-gap vacuum arc discharges
Anode vacuum arc ion sources play a crucial role in electric propulsion and thin-film deposition systems. Short electrode gaps facilitate the transition of anode vacuum arc discharge modes, but insufficient understanding of anode spot formation mechanisms limits device performance improvement. This study established a plasma-sheath-anode coupling theoretical model by analyzing anode surface temperature variations during short-gap vacuum arc discharges, revealing the mechanism of anode spot formation. The results demonstrated that the transition in anode spot formation mechanism is closely related to the breakdown delay time. With a short breakdown delay time, electrons from the cathode thermo-field emission heat the anode under the gap electric field, but their heating energy is insufficient to cause a significant rise in the anode surface temperature. At this stage, cathode plasma is generated. The electrons from this plasma then become the dominant heat source, heating a limited anode region and leading to intense local vaporization, thereby forming an anode spot. With a long breakdown delay time, the energy flux density from cathode-emitted electrons increases significantly, causing anode surface temperature to rapidly rise and spot formation. Subsequently, impact ionization occurs between electrons and evaporated metal atoms, generating anode plasma that expands toward the cathode. The anode plasma electrons then dominate the anode heating process, sustaining the anode spot until discharge termination. Furthermore, this study also observed that titanium electrodes—with lower thermal conductivity than aluminum electrodes—exhibit a higher tendency for anode spot formation. These findings provide important theoretical guidance for optimizing anode vacuum arc ion source designs and enhancing operational efficiency.