JKJoost Kimpel

Joost Kimpel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Joost Kimpel has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Linking the Evolution of Raman-Active Vibrational Modes to the Glass Transition of a Polymer Mixed Conductor

    by Giannis G. Gkikas, Elsa Veronica Flores-Vela, Mariavittoria Craighero, Joost Kimpel, Christian MülLer, Anna Martinelli

    Thin films and bulk samples of an organic mixed ionic-electronic conductor (OMIEC), i.e., a thienothiophene (TT) based conjugated polymer with oligoether side chains, are investigated using variable-frequency dynamic mechanical thermal analysis (DMTA) and variable-temperature Raman spectroscopy. Macroscopically observed thermal transitions are correlated with molecular-scale dynamics. This multianalytical approach identifies a low-temperature β-relaxation originating from side-chain motion and a higher-temperature α-relaxation linked to backbone rearrangement. Specifically, temperature-dependent Raman spectra reveal shifts in characteristic C═C/C–C, C–H, and C–S–C vibrational modes, which were quantified using a sigmoid model. Furthermore, a refined assignment of key vibrational modes ensures accurate spectroscopic interpretation. These results establish temperature-dependent Raman spectroscopy as a sensitive probe for glass and subglass transitions, providing a direct link between vibrational dynamics and thermo-mechanical properties of an exemplar mixed ionic-electronic conductor.

  • Open Access

    Ambient direct arylation synthesis of thienothiophene based copolymers with mixed alkoxy and oligoether side chains

    by Di Zhu, Judith Pons i Tarrés, Joost Kimpel, Meghna Jha, Mariavittoria Craighero, Jesika Asatryan, Alberto Peinador Veiga, Zesheng Liu, Tania Cecilia Hidalgo, Megan M. Westwood, et al.

    Thienothiophene-based copolymers bearing mixed oligoether and alkoxy side chains were synthesized via ambient direct arylation polymerization. Introducing a minor alkoxy fraction helps improve the electrical properties of organic mixed conductors.

  • Open Access

    From π–π Stacking to Chain Entanglements: Single Crystals of Oligoether-Substituted Thieno[3,2- b ]thiophenes

    by Joost Kimpel, Iona Anderson, Di Zhu, Jyotsana Kala, Przemyslaw Sowinski, Alexander Giovannitti, Lars Öhrström, Jenny Nelson, Christian Müller

    Knowledge of the molecular arrangement in the solid state is essential for designing high-performance conjugated polymers. The crystal structures and thermal behavior of their monomers provide important insight into their chain conformation and solid-state structure. Here, single crystals of aromatic thieno[3,2-b]thiophene units bearing mono- to tetraethylene glycol chains, building blocks of some high-performance organic mixed ionic-electronic conductors, are isolated using a robust crystallization protocol and analyzed using single-crystal X-ray diffraction and thermal analysis. Increasing oligoethylene glycol chain length shifts packing from π–π stacking to chain entanglement, accompanied by a melting temperature decrease from 149 to 41 °C. Molecular dynamics simulations using force fields parametrized with density functional theory show greater crystal stability for shorter chains, consistent with stronger π–π interactions relative to chain entanglement. Single crystals of a more extended conjugated system, thiophene-flanked thieno[3,2-b]thiophene with triethylene glycol, show mixed packing motifs and significant disruption of expected S···O interactions, revealing the importance of both side chain and π–π interactions. This work can be anticipated to aid the workup of monomers for synthesis, clarify packing motifs that govern structure–property relationships in conjugated polymers, and enable force-field implementation to guide organic semiconductor design and deepen understanding of their microstructure.


  • Open Access

    Enhanced Photoresponsive Transistor Memory Performance through [2 + 2] Cycloaddition–Retroelectrocyclization of Tröger’s Base-Carbazole Copolymer

    by Chia-Yang Lin, Mei-Nung Chen, Joost Kimpel, Waner He, Guey-Sheng Liou, Yu-Cheng Chiu, Tsuyoshi Michinobu


  • Open Access

    Open-flask, ambient temperature direct arylation synthesis of mixed ionic-electronic conductors

    by Joost Kimpel, Youngseok Kim, Hannes Schomaker, Diego R. Hinojosa, Jesika Asatryan, Jaime Martín, Renee Kroon, Michael Sommer, Christian Müller

    Conjugated polymers are widely studied for application areas ranging from energy technology to wearable electronics and bioelectronics. To develop a truly sustainable technology, environmentally benign synthesis is essential. Here, the open-flask synthesis of a multitude of conjugated polymers at room temperature by ambient direct arylation polymerization (ADAP) is demonstrated. The batch synthesis of over 100 grams of polymer in a green solvent and continuous droplet flow synthesis without any solid support is described. Polymers prepared by ADAP are characterized by improved structural order compared to materials prepared by other methods. Hence, organic electrochemical transistors (OECTs) feature beyond state-of-the-art electrical properties, i.e., an OECT hole mobility μ as high as 6 cm 2 V −1 s −1 , a volumetric capacitance C * over 200 F cm −3 , and thus a figure of merit [μ C * ] exceeding 1100 F cm −1 V −1 s −1 . Thus, ADAP paves the way for the benign and large-scale production of high-performance conjugated polymers.


  • Open Access

    Benchmarking the Elastic Modulus of Conjugated Polymers with Nanoindentation

    by Sri Harish Kumar Paleti, Shuichi Haraguchi, Zhiqiang Cao, Mariavittoria Craighero, Joost Kimpel, Zijin Zeng, Przemyslaw Sowinski, Di Zhu, Judith Pons i Tarrés, Youngseok Kim, et al.

    The elastic modulus is a critical parameter for the design of conjugated polymers for wearable electronics and correlates with electrical and thermal transport. Yet, widely different values have been reported for the same material because of the influence of processing and measurement conditions, including the temperature, mode, direction, and time scale of deformation. Thus, results obtained via different methods are usually not considered to be comparable. Here, disparate techniques from nanoindentation to tensile testing of free-standing films or films on water, buckling analysis, dynamic mechanical thermal analysis, oscillatory shear rheometry, and atomic force microscopy are compared. Strikingly, elastic modulus values obtained for the same batch of regioregular poly(3-hexylthiophene) differ by a factor of less than four, which suggests that an approximate comparison is possible. Considering the small amount of material that is typically available, nanoindentation in combination with creep analysis is identified as a reliable method for probing the elastic modulus of films with widely different elastic moduli ranging from less than 0.1 GPa in the case of a polythiophene with oligoether side chains to several GPa for polymers without side chains. Since films can display anisotropic elastic modulus values, it is proposed that nanoindentation is complemented with an in-plane technique such as tensile testing to ensure a full characterization using different modes of deformation.


  • Open Access

    A facile membraneless method for detecting alkali-metal cations using organic electrochemical transistors

    by Waner He, Yurika Kashino, Naoya Nozaki, Joost Kimpel, Hidetoshi Matsumoto, Yuhei Hayamizu, Tsuyoshi Michinobu

    Organic electrochemical transistors (OECTs) have garnered significant attention due to their exceptional capability to efficiently monitor biological signals, making them an ideal platform for bio-signal detection. Many recent research studies have focused on detecting alkali-metal cations, such as the key cellular messengers of sodium (Na+) and potassium (K+) ions. We now report a straightforward and effective method for fabricating membraneless ion-selective OECTs (IS-OECTs) by directly incorporating crown ethers, specifically 18-crown-6 (18C6) and 15-crown-5 (15C5) ethers, into a polymer matrix of p(g2T-TT), a conjugated polymer bearing glycol side chains. The resulting IS-OECTs demonstrated good sensitivity and a low limit of detection for both Na+ and K+ ions. Importantly, stability tests revealed that 15C5-mixed polymer OECTs show no degradation over 450 continuous cycles in a NaCl aqueous solution, underscoring the excellent retention performance. This study not only provides a facile and efficient approach for the development of ion detection systems based on OECTs but also opens new avenues for advancing bioelectronic devices in future research endeavors.


  • Open Access

    High-mobility organic mixed conductors with a low synthetic complexity index via direct arylation polymerization

    by Joost Kimpel, Youngseok Kim, Jesika Asatryan, Jaime Martín, Renee Kroon, Christian Müller

    The synthesis of conjugated copolymers with glycolated thieno[3,2-b]thiophene units by direct arylation polymerization, their synthetic complexity in the context of literature compounds, and their performance in organic electrochemical transistors is described.


  • Open Access

    N-Type Charge Carrier Transport Properties of BDOPV-Benzothiadiazole-Based Semiconducting Polymers

    by Siyu Wang, Sultan Otep, Joost Kimpel, Takehiko Mori, Tsuyoshi Michinobu

    High-performance n-type organic semiconducting polymers are key components of next-generation organic electronics. Here, we designed and synthesized two electron deficient organic polymers composed of benzodifurandione-based oligo (p-phenylenevinylene) (BDOPV) and benzothiadiazole by Stille coupling polycondensation. BDOPV-benzothiadiazole-based copolymer (PBDOPV-BTT) possesses a D-A1-D-A2 type backbone with intramolecular charge–transfer interactions, while PBDOPV-BTTz is an all-acceptor polymer. The former has a higher molecular weight (Mn) of 109.7 kg∙mol−1 than the latter (Mn = 20.2 kg∙mol−1). The structural difference of these polymers was confirmed by the optical absorption spectra. PBDOPV-BTT showed a more bathochromically shifted absorption spectrum than PBDOPV-BTTz. The longer wavelength absorption of PBDOPV-BTT was due to the intramolecular charge transfer. Therefore, PBDOPV-BTT had a narrower band gap than PBDOPV-BTTz. However, this feature was not reflected by the lowest unoccupied molecular orbital (LUMO) levels. Both polymers displayed almost the same LUMO level of −3.8 eV. Accuracy of this observation was cross-verified by density functional theory (DFT) calculations. The electron-transporting properties were investigated by thin film transistors. PBDOPV-BTT showed an electron mobility (μe) of 1.02 × 10−2 cm2 V−1 s−1 under the optimized annealing conditions. PBDOPV-BTTz exhibited poorer transistor performances with the optimized μe of 9.54 × 10−6 cm2 V−1 s−1. Finally, the grazing-incidence wide angle X-ray scattering (GIWAXS) measurements of both polymer films revealed the higher crystallinity of PBDOPV-BTT with the edge-on orientation.


  • Conjugated polymers for functional applications: lifetime and performance of polymeric organic semiconductors in organic field‐effect transistors

    by Joost Kimpel, Tsuyoshi Michinobu

    Developments in the performance of organic field‐effect transistors have produced devices with similar, and in some cases even better, charge transport properties compared to amorphous silicon. For devices to be viable in more appliances and industry, their lifetime must be improved. However, advances in lifetime are lagging compared to other properties, such as charge carrier mobilities. The lack of a standardized methodology to evaluate the lifetime adds complications, as this property can mostly be compared qualitatively rather than quantitatively. Still, extension of lifetime has been realized through intelligent design of device architecture or alterations that benefit the stability of a device's active organic semiconducting polymer. More unique methods to improve the stability of organic field‐effect transistors, such as blending the semiconducting layer with other polymers or imposing micro‐/nanostructures in the device, have yielded positive results. © 2020 Society of Chemical Industry