Tomasz Wasiak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tomasz Wasiak has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Dawid Janas
Department of Chemistry, Silesian University of Technology, B. Krzywoustego 4, 44-100 Gliwice, Poland
7 shared publications - Dariusz Łukowiec
Materials Research Laboratory, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland
3 shared publications - Ananya Bansal
Nanoscience Laboratory, Institute Instrumentation Centre, Indian Institute of Technology Roorkee, Roorkee, India
2 shared publications - Grzegorz Stando
University of Pittsburgh
2 shared publications - Stanisław Wacławek
Institute for Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec, 461 17 Liberec, Czech Republic
2 shared publications - Adam Smoliński
Central Mining Institute-National Research Institute, Pl. Gwarkow 1, 40-166, Katowice, Poland
1 shared publication
Latest Publications
- Open Access
- 15 June 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 249
Efficient urea electrooxidation on highly active Ni-Cu nanowires
- 15 June 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 249
Open AccessEfficient urea electrooxidation on highly active Ni-Cu nanowires
- Open Access
- 28 January 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-9
PdNPs/NiNWs as a welding tool for the synthesis of polyfluorene derivatives by Suzuki polycondensation under microwave radiation
Conjugated polymers are promising tools to differentiate various types of semiconducting single-walled carbon nanotubes (s-SWCNTs). However, their synthesis is challenging. Insufficient control over molecular weights, and unpredictive/unrepeatable batches hinder possible applications and scale-up. Furthermore, commercial homogeneous catalysts often require inert conditions and are almost impossible to recycle. To overcome these problems, we present a nanocatalyst consisting of magnetic nickel nanowires decorated with highly active palladium nanoparticles. A two-step wet chemical reduction protocol with the assistance of sonochemistry was employed to obtain a heterogeneous catalyst capable of conducting step-growth Suzuki polycondensation of a fluorene-based monomer. Additionally, we enhanced the performance of our catalytic system via controlled microwave irradiation, which significantly shortened the reaction time from 3 d to only 1 h. We studied the influence of the main process parameters on the yield and polymer chain length to gain insight into phenomena occurring in the presence of metallic species under microwave irradiation. Finally, the produced polymers were used to extract specific s-SWCNTs by conjugated polymer extraction to validate their utility.
- 28 January 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-9
Open AccessPdNPs/NiNWs as a welding tool for the synthesis of polyfluorene derivatives by Suzuki polycondensation under microwave radiation
Conjugated polymers are promising tools to differentiate various types of semiconducting single-walled carbon nanotubes (s-SWCNTs). However, their synthesis is challenging. Insufficient control over molecular weights, and unpredictive/unrepeatable batches hinder possible applications and scale-up. Furthermore, commercial homogeneous catalysts often require inert conditions and are almost impossible to recycle. To overcome these problems, we present a nanocatalyst consisting of magnetic nickel nanowires decorated with highly active palladium nanoparticles. A two-step wet chemical reduction protocol with the assistance of sonochemistry was employed to obtain a heterogeneous catalyst capable of conducting step-growth Suzuki polycondensation of a fluorene-based monomer. Additionally, we enhanced the performance of our catalytic system via controlled microwave irradiation, which significantly shortened the reaction time from 3 d to only 1 h. We studied the influence of the main process parameters on the yield and polymer chain length to gain insight into phenomena occurring in the presence of metallic species under microwave irradiation. Finally, the produced polymers were used to extract specific s-SWCNTs by conjugated polymer extraction to validate their utility.
- Open Access
- 1 December 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (97) , 41279-41293
Pd decorated Co–Ni nanowires as a highly efficient catalyst for direct ethanol fuel cells
- 1 December 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (97) , 41279-41293
Open AccessPd decorated Co–Ni nanowires as a highly efficient catalyst for direct ethanol fuel cells
- Open Access
Carbon Nanotube-Based Thermoelectric Modules Enhanced by ZnO Nanowires
Carbon nanotubes (CNTs) have a wide range of unique properties, which have kept them at the forefront of research in recent decades. Due to their electrical and thermal characteristics, they are often evaluated as key components of thermogenerators. One can create thermogenerators exclusively from CNTs, without any metal counterpart, by properly selecting dopants to obtain n- and p-doped CNTs. However, the performance of CNT thermogenerators remains insufficient to reach wide commercial implementation. This study shows that molecular doping and the inclusion of ZnO nanowires (NWs) can greatly increase their application potential. Moreover, prototype modules, based on single-walled CNTs (SWCNTs), ZnO NWs, polyethyleneimine, and triazole, reveal notable capabilities for generating electrical energy, while ensuring fully scalable performance. Upon doping and the addition of ZnO nanowires, the electrical conductivity of pure SWCNTs (211 S/cm) was increased by a factor of three. Moreover, the proposed strategy enhanced the Power Factor values from 18.99 (unmodified SWCNTs) to 34.9 and 42.91 µW/m∙K2 for CNTs triazole and polyethyleneimine + ZnO NWs inclusion, respectively.
Open AccessCarbon Nanotube-Based Thermoelectric Modules Enhanced by ZnO Nanowires
Carbon nanotubes (CNTs) have a wide range of unique properties, which have kept them at the forefront of research in recent decades. Due to their electrical and thermal characteristics, they are often evaluated as key components of thermogenerators. One can create thermogenerators exclusively from CNTs, without any metal counterpart, by properly selecting dopants to obtain n- and p-doped CNTs. However, the performance of CNT thermogenerators remains insufficient to reach wide commercial implementation. This study shows that molecular doping and the inclusion of ZnO nanowires (NWs) can greatly increase their application potential. Moreover, prototype modules, based on single-walled CNTs (SWCNTs), ZnO NWs, polyethyleneimine, and triazole, reveal notable capabilities for generating electrical energy, while ensuring fully scalable performance. Upon doping and the addition of ZnO nanowires, the electrical conductivity of pure SWCNTs (211 S/cm) was increased by a factor of three. Moreover, the proposed strategy enhanced the Power Factor values from 18.99 (unmodified SWCNTs) to 34.9 and 42.91 µW/m∙K2 for CNTs triazole and polyethyleneimine + ZnO NWs inclusion, respectively.
- Open Access
Nano-Ru Supported on Ni Nanowires for Low-Temperature Carbon Dioxide Methanation
In this study, we investigated the catalytic performance of Ru nanoparticles (NPs) supported on Ni-nanowires for the first time. This appears to be a highly efficient catalyst for low-temperature methanation, e.g., ca. 100% conversion and 100% of CH4 selectivity can be achieved at ca. 179 °C, while the turnover frequency (TOF) value was 2479.2 h−1. At the same time, the onset of a reaction was observed at a temperature as low as 130 °C. The comparison of nano-Pd and nano-Ru supported on Ni-nanowires enabled us to prove that oxidized surface metals are highly important for the high activity of the investigated nano-Ru@nanowired-Ni. Moreover, similar to the microscopic Sabatier rule, which indicates that some optimal reactivity level of a catalyst exists, we showed that Ni-nanowires (a higher specific surface area than a standard metal surface, e.g., in the form of a metal foam, but lower than nano-sized materials) significantly enhances the performance of the Ru-Ni catalytic system.
Open AccessNano-Ru Supported on Ni Nanowires for Low-Temperature Carbon Dioxide Methanation
In this study, we investigated the catalytic performance of Ru nanoparticles (NPs) supported on Ni-nanowires for the first time. This appears to be a highly efficient catalyst for low-temperature methanation, e.g., ca. 100% conversion and 100% of CH4 selectivity can be achieved at ca. 179 °C, while the turnover frequency (TOF) value was 2479.2 h−1. At the same time, the onset of a reaction was observed at a temperature as low as 130 °C. The comparison of nano-Pd and nano-Ru supported on Ni-nanowires enabled us to prove that oxidized surface metals are highly important for the high activity of the investigated nano-Ru@nanowired-Ni. Moreover, similar to the microscopic Sabatier rule, which indicates that some optimal reactivity level of a catalyst exists, we showed that Ni-nanowires (a higher specific surface area than a standard metal surface, e.g., in the form of a metal foam, but lower than nano-sized materials) significantly enhances the performance of the Ru-Ni catalytic system.
- Open Access
- 2 August 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (8) , 1113
Simple Method to Improve Electrical Conductivity of Films Made from Single-Walled Carbon Nanotubes
Despite the widespread use of sonication for individualization of nanomaterials, its destructive nature is rarely acknowledged. In this study, we demonstrated how exposure of the material to a hostile sound wave environment can be limited by the application of another preprocessing step. Single-walled carbon nanotubes (CNTs) were initially ground in a household coffee grinder, which enabled facile deagglomeration thereof. Such a simple approach enabled us to obtain high-quality CNT dispersion at reduced sonication time. Most importantly, electrical conductivity of free-standing films prepared from these dispersion was improved almost fourfold as compared with unground material eventually reaching 1067 ± 34 S/cm. This work presents a new approach as to how electrical properties of nanocarbon ensembles may be enhanced without the application of doping agents, the presence of which is often ephemeral.
- 2 August 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (8) , 1113
Open AccessSimple Method to Improve Electrical Conductivity of Films Made from Single-Walled Carbon Nanotubes
Despite the widespread use of sonication for individualization of nanomaterials, its destructive nature is rarely acknowledged. In this study, we demonstrated how exposure of the material to a hostile sound wave environment can be limited by the application of another preprocessing step. Single-walled carbon nanotubes (CNTs) were initially ground in a household coffee grinder, which enabled facile deagglomeration thereof. Such a simple approach enabled us to obtain high-quality CNT dispersion at reduced sonication time. Most importantly, electrical conductivity of free-standing films prepared from these dispersion was improved almost fourfold as compared with unground material eventually reaching 1067 ± 34 S/cm. This work presents a new approach as to how electrical properties of nanocarbon ensembles may be enhanced without the application of doping agents, the presence of which is often ephemeral.
- Open Access
Nickel Nanowires: Synthesis, Characterization and Application as Effective Catalysts for the Reduction of Nitroarenes
We have demonstrated a convenient method of synthesizing nickel nanowires (NiNWs), which could be easily tuned to produce materials with a carefully defined nanostructure. By varying the concentration of the Ni precursor, pH of the medium or reaction temperature, we directly affected the diameter of the formed product as well as the yield of the process. The obtained material consisted of straight bundles of NiNWs, which revealed powerful catalytic action for the reduction of nitroarenes to appropriate amine derivatives. A selection of substrates were employed and all of them were successfully converted into the corresponding aromatic amine despite the presence of different substituents on the aromatic ring with high yields, even in large scale reactions. The results showed that NiNW-based catalysts could constitute efficient catalytic systems for the synthesis of aryl amines at industrial levels.
Open AccessNickel Nanowires: Synthesis, Characterization and Application as Effective Catalysts for the Reduction of Nitroarenes
We have demonstrated a convenient method of synthesizing nickel nanowires (NiNWs), which could be easily tuned to produce materials with a carefully defined nanostructure. By varying the concentration of the Ni precursor, pH of the medium or reaction temperature, we directly affected the diameter of the formed product as well as the yield of the process. The obtained material consisted of straight bundles of NiNWs, which revealed powerful catalytic action for the reduction of nitroarenes to appropriate amine derivatives. A selection of substrates were employed and all of them were successfully converted into the corresponding aromatic amine despite the presence of different substituents on the aromatic ring with high yields, even in large scale reactions. The results showed that NiNW-based catalysts could constitute efficient catalytic systems for the synthesis of aryl amines at industrial levels.
- 30 July 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 29 (40) , 405704
Probing the mechanics of aqueous two-phase extraction using large diameter single-walled carbon nanotubes
We have demonstrated that large diameter (1.8 ± 0.4 nm) carbon nanotubes (CNTs) can be separated by means of the aqueous two-phase extraction (ATPE). This rapid and convenient tool has enabled us to isolate fractions of particular CNT diameter distribution. We have shown how a range of parameters can be used to fine tune the characteristics of the isolated material. Interestingly, by varying the pH of the medium, we have suppressed the extraction of low diameter CNTs and only large diameter CNTs were obtained. A number of other factors such as selected surfactant concentration steps, temperature or amount of starting CNT material have been found to have a significant effect on the end result of the CNT differentiation. The findings have provided us with more insight regarding the underlying mechanics of ATPE for processing polydisperse CNT mixtures.
- 30 July 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 29 (40) , 405704
Probing the mechanics of aqueous two-phase extraction using large diameter single-walled carbon nanotubes
We have demonstrated that large diameter (1.8 ± 0.4 nm) carbon nanotubes (CNTs) can be separated by means of the aqueous two-phase extraction (ATPE). This rapid and convenient tool has enabled us to isolate fractions of particular CNT diameter distribution. We have shown how a range of parameters can be used to fine tune the characteristics of the isolated material. Interestingly, by varying the pH of the medium, we have suppressed the extraction of low diameter CNTs and only large diameter CNTs were obtained. A number of other factors such as selected surfactant concentration steps, temperature or amount of starting CNT material have been found to have a significant effect on the end result of the CNT differentiation. The findings have provided us with more insight regarding the underlying mechanics of ATPE for processing polydisperse CNT mixtures.