Mahboubeh Bohlouli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mahboubeh Bohlouli has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Arash Khojasteh
Dental Research Center, Research Institute of Dental Sciences, Shahid Beheshti University of Medical Sciences, Tehran, Iran
4 shared publications - Hanieh Nokhbatolfoghahaei
Dental Research Center, Research Institute of Dental Sciences, Shahid Beheshti University of Medical Sciences, Tehran, Iran
4 shared publications Amirali Aghamohammadi
Faculty of Veterinary Medicine, Science and Research Branch, Islamic Azad University, Tehran, Iran
2 shared publications- Amirhossein Dadjoo
Department of Pathology, Imam Reza Hospital, Tabriz University of Medical Sciences, Tabriz, Iran
2 shared publications - Fatemeh Kamali
Department of Pathology, Imam Reza Hospital, Tabriz University of Medical Sciences, Tabriz, Iran
2 shared publications - Mahsa Faramin Lashkarian
School of Medicine, Guilan University of Medical Sciences, Rasht, Iran
2 shared publications
Latest Publications
- 8 September 2026
- Published by SAGE Publications in Tissue Engineering Part B: Reviews
Chitosan-Based Hydrogels for Spinal Cord Regeneration: A Systematic Review of Preclinical Evidence, Regenerative Mechanisms, and Translational Challenges
Tissue engineering products, especially hydrogels, have been evaluated in many studies for spinal cord regeneration due to their injectability and similar deformability to the target tissue. In particular, chitosan has been used in many studies along with other polymers due to their biocompatibility, biodegradability, antibacterial properties, and the creation of an ECM similar to human tissue for carrying various cells and biomolecules. Therefore, this study aimed to investigate the performance of these chitosan-based hydrogels for spinal cord regeneration in animal models. Electronic databases (Scopus, Web of Science, PubMed, and Google Scholar) were searched (March 2015 to April 2026) with main terms, including “Hydrogel,” “chitosan,” and “spinal cord” for every study that used biomolecules for the regeneration of spinal cord injury in animal models. The animal studies were selected according to the eligibility criteria and evaluated for risk of bias and quality assessment. After screening, 125 full-text articles were assessed for eligibility, and 54 studies were included in the qualitative synthesis. Chitosan-based hydrogels, alone or with polymers, biomolecules, and cells, were evaluated mainly in rat spinal cord injury models, with contusion most frequent. The Basso–Beattie–Bresnahan scale primarily assessed functional recovery, although most studies showed high or unclear risk of bias due to limited reporting. Chitosan-based hydrogels show promise for spinal cord regeneration, but variability in models and insufficient methodological reporting highlight the need for standardized protocols to enhance translation potential. Impact Statement: Spinal cord injury is still a major clinical problem with few available treatments. In this systematic review, we summarize the evidence from 54 animal trials on the use of chitosan-based hydrogels for healing of spinal cord damage. The results show their biocompatibility, biodegradability, and ability to transfer biomolecules and cells, leading to functional recovery in preclinical animal models. However, methodological inconsistency and lack of reporting in research undermine the dependability of the translation. This study highlights the requirement for standardized experimental procedures and gives valuable knowledge to guide the future development and practical implementation of chitosan-based hydrogel treatments for spinal cord regeneration.
- 8 September 2026
- Published by SAGE Publications in Tissue Engineering Part B: Reviews
Chitosan-Based Hydrogels for Spinal Cord Regeneration: A Systematic Review of Preclinical Evidence, Regenerative Mechanisms, and Translational Challenges
Tissue engineering products, especially hydrogels, have been evaluated in many studies for spinal cord regeneration due to their injectability and similar deformability to the target tissue. In particular, chitosan has been used in many studies along with other polymers due to their biocompatibility, biodegradability, antibacterial properties, and the creation of an ECM similar to human tissue for carrying various cells and biomolecules. Therefore, this study aimed to investigate the performance of these chitosan-based hydrogels for spinal cord regeneration in animal models. Electronic databases (Scopus, Web of Science, PubMed, and Google Scholar) were searched (March 2015 to April 2026) with main terms, including “Hydrogel,” “chitosan,” and “spinal cord” for every study that used biomolecules for the regeneration of spinal cord injury in animal models. The animal studies were selected according to the eligibility criteria and evaluated for risk of bias and quality assessment. After screening, 125 full-text articles were assessed for eligibility, and 54 studies were included in the qualitative synthesis. Chitosan-based hydrogels, alone or with polymers, biomolecules, and cells, were evaluated mainly in rat spinal cord injury models, with contusion most frequent. The Basso–Beattie–Bresnahan scale primarily assessed functional recovery, although most studies showed high or unclear risk of bias due to limited reporting. Chitosan-based hydrogels show promise for spinal cord regeneration, but variability in models and insufficient methodological reporting highlight the need for standardized protocols to enhance translation potential. Impact Statement: Spinal cord injury is still a major clinical problem with few available treatments. In this systematic review, we summarize the evidence from 54 animal trials on the use of chitosan-based hydrogels for healing of spinal cord damage. The results show their biocompatibility, biodegradability, and ability to transfer biomolecules and cells, leading to functional recovery in preclinical animal models. However, methodological inconsistency and lack of reporting in research undermine the dependability of the translation. This study highlights the requirement for standardized experimental procedures and gives valuable knowledge to guide the future development and practical implementation of chitosan-based hydrogel treatments for spinal cord regeneration.
- 15 July 2026
- Published by Springer Nature in Reproductive Sciences
- Vol. 33 (8) , 1466-1486
Recent Trends in Tissue Engineering Strategies for Uterine Endometrial Regeneration: a Systematic Review
Endometrial injury is an important cause of infertility and adverse reproductive outcomes, but current treatments often fail to fully restore uterine structure and function. Tissue engineering strategies, including hydrogels, biodegradable scaffolds, 3D bioprinting, organoids, and microfluidic systems, have emerged as promising approaches for endometrial repair. This systematic review evaluated the available evidence on tissue engineering strategies for endometrial regeneration. PubMed, Web of Science, and Scopus were searched for studies published between January 2014 and May 2024. Of 3,381 records identified, 117 studies met the inclusion criteria. Due to substantial heterogeneity in study design and outcome measures, findings were synthesized qualitatively. Hydrogels and biomaterial scaffolds were the most frequently studied approaches, whereas organoids and 3D bioprinting showed potential for disease modeling and personalized regeneration. Microfluidic systems were rarely studied but may have future translational relevance. Tissue engineering approaches appear promising for endometrial repair. However, clinical evidence remains limited, and further human studies are needed to establish safety, efficacy, and long-term durability before routine clinical translation. REGISTRATION NUMBER: CRD420251046577.
- 15 July 2026
- Published by Springer Nature in Reproductive Sciences
- Vol. 33 (8) , 1466-1486
Recent Trends in Tissue Engineering Strategies for Uterine Endometrial Regeneration: a Systematic Review
Endometrial injury is an important cause of infertility and adverse reproductive outcomes, but current treatments often fail to fully restore uterine structure and function. Tissue engineering strategies, including hydrogels, biodegradable scaffolds, 3D bioprinting, organoids, and microfluidic systems, have emerged as promising approaches for endometrial repair. This systematic review evaluated the available evidence on tissue engineering strategies for endometrial regeneration. PubMed, Web of Science, and Scopus were searched for studies published between January 2014 and May 2024. Of 3,381 records identified, 117 studies met the inclusion criteria. Due to substantial heterogeneity in study design and outcome measures, findings were synthesized qualitatively. Hydrogels and biomaterial scaffolds were the most frequently studied approaches, whereas organoids and 3D bioprinting showed potential for disease modeling and personalized regeneration. Microfluidic systems were rarely studied but may have future translational relevance. Tissue engineering approaches appear promising for endometrial repair. However, clinical evidence remains limited, and further human studies are needed to establish safety, efficacy, and long-term durability before routine clinical translation. REGISTRATION NUMBER: CRD420251046577.
- Open Access
- 1 February 2026
- Published by SAGE Publications in Digital Health
- Vol. 12
Calibrated ensemble deep learning for four-class lung CT image classification and uncertainty-based referral
Background: Deep-learning systems may support chest CT interpretation, but their reliability depends on balanced class performance, calibrated probabilities, and transparent handling of uncertain predictions. We developed an ensemble framework for four-class image-level classification of adenocarcinoma, large cell carcinoma, squamous cell carcinoma, and normal lung images. Methods: We retrospectively analyzed 1,000 publicly available chest CT images using the dataset-provided training, validation, and test partitions. ImageNet-pretrained Xception, DenseNet121, and ResNet50V2 models were trained with augmentation, random oversampling, and focal loss. Validation-selected models were combined in a weighted ensemble, temperature calibrated, decision scaled, and evaluated for discrimination, calibration, predictive entropy, and uncertainty-based referral. Results: On the test partition, the calibrated decision-scaled ensemble achieved 77.8% accuracy (95% CI, 73.7%–82.7%), 83.5% balanced accuracy, a macro F1 of 0.812, and a macro AUROC of 0.980. Expected calibration error decreased from 0.084 to 0.062. Predictive entropy was higher for errors (p<0.001), and deferring the most uncertain 10% increased accuracy to 83.0%. Conclusion: The calibrated ensemble showed strong probability-based discrimination but uneven subtype classification, particularly between adenocarcinoma and squamous cell carcinoma. Predictive entropy identified error-prone images and enabled improved performance after selective referral. These findings support uncertainty-aware assistance while underscoring the need for patient-level, multicenter external validation before clinical implementation.
- 1 February 2026
- Published by SAGE Publications in Digital Health
- Vol. 12
Open AccessCalibrated ensemble deep learning for four-class lung CT image classification and uncertainty-based referral
Background: Deep-learning systems may support chest CT interpretation, but their reliability depends on balanced class performance, calibrated probabilities, and transparent handling of uncertain predictions. We developed an ensemble framework for four-class image-level classification of adenocarcinoma, large cell carcinoma, squamous cell carcinoma, and normal lung images. Methods: We retrospectively analyzed 1,000 publicly available chest CT images using the dataset-provided training, validation, and test partitions. ImageNet-pretrained Xception, DenseNet121, and ResNet50V2 models were trained with augmentation, random oversampling, and focal loss. Validation-selected models were combined in a weighted ensemble, temperature calibrated, decision scaled, and evaluated for discrimination, calibration, predictive entropy, and uncertainty-based referral. Results: On the test partition, the calibrated decision-scaled ensemble achieved 77.8% accuracy (95% CI, 73.7%–82.7%), 83.5% balanced accuracy, a macro F1 of 0.812, and a macro AUROC of 0.980. Expected calibration error decreased from 0.084 to 0.062. Predictive entropy was higher for errors (p<0.001), and deferring the most uncertain 10% increased accuracy to 83.0%. Conclusion: The calibrated ensemble showed strong probability-based discrimination but uneven subtype classification, particularly between adenocarcinoma and squamous cell carcinoma. Predictive entropy identified error-prone images and enabled improved performance after selective referral. These findings support uncertainty-aware assistance while underscoring the need for patient-level, multicenter external validation before clinical implementation.
- Open Access
- 23 November 2025
- Published by Elsevier in Results in Engineering
- Vol. 28
Enhancing biodegradable Mg-3Sn alloy via yttrium addition and heat treatment: Microstructure, mechanical performance, corrosion resistance, and biocompatibility
- 23 November 2025
- Published by Elsevier in Results in Engineering
- Vol. 28
Open AccessEnhancing biodegradable Mg-3Sn alloy via yttrium addition and heat treatment: Microstructure, mechanical performance, corrosion resistance, and biocompatibility
- Open Access
- 18 July 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-18
Fabrication, characterization and evaluating properties of 3D printed PLA-Mn scaffolds
Polylactic acid (PLA) based scaffolds have attained considerable attention in recent years for being used as biodegradable implants in bone tissue engineering (BTE), owing to their suitable biocompatibility and processability. Nevertheless, the mechanical properties, bioactivity and biodegradation rate of PLA need to be improved for practical application. In this investigation, PLA-xMn composite filaments (x = 0, 1, 3, 5 and 7 wt%) were fabricated, characterized, and used for 3D printing of scaffolds by the fused deposition modeling process. The effect of Mn addition on the thermal, physical, mechanical, and structural properties, as well as the degradability and cell viability of 3D printed scaffolds were investigated in details. The obtained results indicate that the PLA-Mn composite filaments exhibit higher chain mobility and melt flow index values, with lower cold crystallization temperature and a higher degree of crystallinity. This higher flowability led to lower dimensional accuracy of 3D printed scaffolds, but resulted in higher interlayer adhesion. It was found that the mechanical properties of composite scaffolds were remarkably enhanced with the addition of Mn particles. The incorporation of Mn particles also caused higher surface roughness and hydrophilicity, a superior biodegradation rate of the scaffolds as well as better biocompatibility, indicating a promising candidate for (BTE) applications.
- 18 July 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-18
Open AccessFabrication, characterization and evaluating properties of 3D printed PLA-Mn scaffolds
Polylactic acid (PLA) based scaffolds have attained considerable attention in recent years for being used as biodegradable implants in bone tissue engineering (BTE), owing to their suitable biocompatibility and processability. Nevertheless, the mechanical properties, bioactivity and biodegradation rate of PLA need to be improved for practical application. In this investigation, PLA-xMn composite filaments (x = 0, 1, 3, 5 and 7 wt%) were fabricated, characterized, and used for 3D printing of scaffolds by the fused deposition modeling process. The effect of Mn addition on the thermal, physical, mechanical, and structural properties, as well as the degradability and cell viability of 3D printed scaffolds were investigated in details. The obtained results indicate that the PLA-Mn composite filaments exhibit higher chain mobility and melt flow index values, with lower cold crystallization temperature and a higher degree of crystallinity. This higher flowability led to lower dimensional accuracy of 3D printed scaffolds, but resulted in higher interlayer adhesion. It was found that the mechanical properties of composite scaffolds were remarkably enhanced with the addition of Mn particles. The incorporation of Mn particles also caused higher surface roughness and hydrophilicity, a superior biodegradation rate of the scaffolds as well as better biocompatibility, indicating a promising candidate for (BTE) applications.
- 13 August 2023
- Published by Wolters Kluwer Health in ASAIO Journal
- Vol. 69 (11) , 967-976
The Promise of Regenerative Medicine in the Reconstruction of Auricular Cartilage Deformities
There are many physiologic and psychologic challenges associated with ear cartilage deformities which are incredibly distasteful to patients, particularly children. The development of regenerative medicine (RM) sciences has opened up a new window for the reconstruction of auricular cartilage because it allows the creation of a structure similar to the auricular in appearance and function. As part of this review, we discuss the role that each RM tool, including tissue engineering, cells, and biomolecules, plays in developing engineered auricular tissue. In previous studies, it was shown that the simultaneous use of natural and synthetic biomaterials as well as three-dimensional printing techniques could improve the biological and mechanical properties of this tissue. Another critical issue is using stem cells and differentiated cartilage cells to produce tissue-specific cellular structures and extracellular matrix. Also, the importance of choosing a suitable animal model in terms of handling and care facilities, physiologic similarities to humans, and breed uniformity in the preclinical assessments have been highlighted. Then, the clinical trials registered on the clinicaltrials.gov website, and the commercialized product, called AuriNovo, have been comprehensively explained. Overall, it is important to provide engineered auricular cartilage structures with acceptable safety and efficacy compared with standard methods, autologous cartilage transplantation, and prosthetic reconstruction in RM.
- 13 August 2023
- Published by Wolters Kluwer Health in ASAIO Journal
- Vol. 69 (11) , 967-976
The Promise of Regenerative Medicine in the Reconstruction of Auricular Cartilage Deformities
There are many physiologic and psychologic challenges associated with ear cartilage deformities which are incredibly distasteful to patients, particularly children. The development of regenerative medicine (RM) sciences has opened up a new window for the reconstruction of auricular cartilage because it allows the creation of a structure similar to the auricular in appearance and function. As part of this review, we discuss the role that each RM tool, including tissue engineering, cells, and biomolecules, plays in developing engineered auricular tissue. In previous studies, it was shown that the simultaneous use of natural and synthetic biomaterials as well as three-dimensional printing techniques could improve the biological and mechanical properties of this tissue. Another critical issue is using stem cells and differentiated cartilage cells to produce tissue-specific cellular structures and extracellular matrix. Also, the importance of choosing a suitable animal model in terms of handling and care facilities, physiologic similarities to humans, and breed uniformity in the preclinical assessments have been highlighted. Then, the clinical trials registered on the clinicaltrials.gov website, and the commercialized product, called AuriNovo, have been comprehensively explained. Overall, it is important to provide engineered auricular cartilage structures with acceptable safety and efficacy compared with standard methods, autologous cartilage transplantation, and prosthetic reconstruction in RM.
- Open Access
- 4 November 2022
- Published by FapUNIFESP (SciELO) in Journal of Applied Oral Science
- Vol. 30, e20220203
Comparative evaluation of the effects of three hydraulic calcium silicate cements on odontoblastic differentiation of human dental pulp stem cells: an in vitro study
The study aimed to compare the response of human dental pulp stem cells (hDPSCs) towards three hydraulic calcium silicate cements (HCSCs) by measuring cytotoxicity and expression of dentinogenic genes. Dental pulps of five impacted mandibular third molars were extirpated as a source for hDPSCs. Next to culturing, hDPSCs were subjected to fluorescence-activated cell sorting after the third passage to validate stemness of the cells. Human DPSCs were exposed to diluted supernatants of OrthoMTA (OMTA), Biodentine (BD) and Calcium-Enriched Mixture (CEM) at concentrations 10, 25, 50 and 100% at the first, third and fifth day of culture. Then, cells were exposed to 10% concentrations supernatant of HCSCs to determine DSPP and DMP1 gene expression, using a quantitative polymerase-chain reaction. Data were analyzed using one-way and three-way ANOVA, followed by Tukey post hoc statistical tests. Optimal cell proliferation was observed in all groups, regardless of concentration and time-point. HCSC supernatants were non-cytotoxic to hDPSCs at all three time-points, except for 100% Biodentine on day five. On day seven, OMTA group significantly upregulated the expression of DSPP and DMP1 genes. On day 14, expression of DMP1 and DSPP genes were significantly higher in BD and OMTA groups, respectively. Biodentine significantly upregulated DMP1 gene expression over 14 days, whereas CEM was associated with only minimal expression of DSPP and DMP1 .
- 4 November 2022
- Published by FapUNIFESP (SciELO) in Journal of Applied Oral Science
- Vol. 30, e20220203
Open AccessComparative evaluation of the effects of three hydraulic calcium silicate cements on odontoblastic differentiation of human dental pulp stem cells: an in vitro study
The study aimed to compare the response of human dental pulp stem cells (hDPSCs) towards three hydraulic calcium silicate cements (HCSCs) by measuring cytotoxicity and expression of dentinogenic genes. Dental pulps of five impacted mandibular third molars were extirpated as a source for hDPSCs. Next to culturing, hDPSCs were subjected to fluorescence-activated cell sorting after the third passage to validate stemness of the cells. Human DPSCs were exposed to diluted supernatants of OrthoMTA (OMTA), Biodentine (BD) and Calcium-Enriched Mixture (CEM) at concentrations 10, 25, 50 and 100% at the first, third and fifth day of culture. Then, cells were exposed to 10% concentrations supernatant of HCSCs to determine DSPP and DMP1 gene expression, using a quantitative polymerase-chain reaction. Data were analyzed using one-way and three-way ANOVA, followed by Tukey post hoc statistical tests. Optimal cell proliferation was observed in all groups, regardless of concentration and time-point. HCSC supernatants were non-cytotoxic to hDPSCs at all three time-points, except for 100% Biodentine on day five. On day seven, OMTA group significantly upregulated the expression of DSPP and DMP1 genes. On day 14, expression of DMP1 and DSPP genes were significantly higher in BD and OMTA groups, respectively. Biodentine significantly upregulated DMP1 gene expression over 14 days, whereas CEM was associated with only minimal expression of DSPP and DMP1 .
- 15 February 2022
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 110 (7) , 1675-1686
Prefabrication technique by preserving a muscular pedicle from masseter muscle as an in vivo bioreactor for reconstruction of mandibular critical‐sized bone defects in canine models
In vivo bioreactors serve as regenerative niches that improve vascularization and regeneration of bone grafts. This study has evaluated the masseter muscle as a natural bioreactor for βTCP or PCL/βTCP scaffolds, in terms of bone regeneration. The effect of pedicle preservation, along with sole, or MSC‐ or rhBMP2‐combined application of scaffolds, has also been studied. Twenty‐four mongrel dogs were randomly placed in six groups, including βTCP, βTCP/rhBMP2, βTCP/MSCs, PCL/βTCP, PCL/βTCP/rhBMP2, and PCL/βTCP/MSCs. During the first surgery, the scaffolds were implanted into the masseter muscle for being prefabricated. After 2 months, each group was divided into two subgroups prior to mandibular bone defect reconstruction; one with a preserved vascularized pedicle and one without. After 12 weeks, animals were euthanized, and new bone formation was evaluated using histological analysis. Histological analysis showed that all β‐TCP scaffold groups had resulted in significantly greater rates of new bone formation, either with a pedicle surgical approach or non‐pedicle surgical approach, comparing to their parallel groups of βTCP/PCL scaffolds (p ≤ .05). Pedicled β‐TCP scaffold groups that were treated with either rhBMP2 (48.443% ± 0.250%) or MSCs (46.577% ± 0.601%) demonstrated the highest rates of new bone formation (p ≤ .05). Therefore, masseter muscle can be used as a local in vivo bioreactor with potential clinical advantages in reconstruction of human mandibular defects. In addition, scaffold composition, pedicle preservation, and treatment with MSCs or rhBMP2, influence new bone formation and scaffold degradation rates in the prefabrication technique.
- 15 February 2022
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 110 (7) , 1675-1686
Prefabrication technique by preserving a muscular pedicle from masseter muscle as an in vivo bioreactor for reconstruction of mandibular critical‐sized bone defects in canine models
In vivo bioreactors serve as regenerative niches that improve vascularization and regeneration of bone grafts. This study has evaluated the masseter muscle as a natural bioreactor for βTCP or PCL/βTCP scaffolds, in terms of bone regeneration. The effect of pedicle preservation, along with sole, or MSC‐ or rhBMP2‐combined application of scaffolds, has also been studied. Twenty‐four mongrel dogs were randomly placed in six groups, including βTCP, βTCP/rhBMP2, βTCP/MSCs, PCL/βTCP, PCL/βTCP/rhBMP2, and PCL/βTCP/MSCs. During the first surgery, the scaffolds were implanted into the masseter muscle for being prefabricated. After 2 months, each group was divided into two subgroups prior to mandibular bone defect reconstruction; one with a preserved vascularized pedicle and one without. After 12 weeks, animals were euthanized, and new bone formation was evaluated using histological analysis. Histological analysis showed that all β‐TCP scaffold groups had resulted in significantly greater rates of new bone formation, either with a pedicle surgical approach or non‐pedicle surgical approach, comparing to their parallel groups of βTCP/PCL scaffolds (p ≤ .05). Pedicled β‐TCP scaffold groups that were treated with either rhBMP2 (48.443% ± 0.250%) or MSCs (46.577% ± 0.601%) demonstrated the highest rates of new bone formation (p ≤ .05). Therefore, masseter muscle can be used as a local in vivo bioreactor with potential clinical advantages in reconstruction of human mandibular defects. In addition, scaffold composition, pedicle preservation, and treatment with MSCs or rhBMP2, influence new bone formation and scaffold degradation rates in the prefabrication technique.