PJPaul Jamison

Paul Jamison

*This is an algorithmically generated author record based on publicly available information.

Paul Jamison has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Process-Induced ReRAM Performance Improvement of Atomic Layer Deposited HfO2 for Analog In-Memory Computing Applications

    by Steven Consiglio, Hisashi Higuchi, Takashi Ando, Paul Jamison, Soon-Cheon Seo, Dexin Kong, Youngseok Kim, Kandabara Tapily, Robert D Clark, Marinus Hopstaken, et al.

    Neuromorphic computing represents a potential paradigm shift from conventional von Neumann computing architecture and shows promise for achieving massive parallelism and power efficiency for such data-centric tasks as image recognition and language processing. Based on the concept of synaptic plasticity, human-like machine learning can be potentially realized by use of arrays of electronic synapses that function in an analogous manner to biological neurons. One of the key features of this type of computing is the ability to control synaptic weights in an analog-like fashion for use in both inference and training applications. A number of existing device technologies in non-volatile memory systems exhibit attractive characteristics for such synaptic devices.[1,2] In particular, resistive switching devices (resistive random-access memory or ReRAM) can change and store their conductance value (G) in response to electrical stimuli making them potentially enabling for deep learning applications involving synaptic weights. For ReRAM devices, HfO2-based thin films can be utilized for filamentary oxide ReRAM and are an attractive option due to their fab-friendly processing and current implementation in high-volume manufacturing. In this study, we evaluated atomic layer deposition (ALD) for the growth of HfO2 for integration in both front-end-of-line (FEOL) and back-end-of-line (BEOL) compatible test structures on 300 mm wafers in order to optimize electrical performance for use as synaptic device elements in neuromorphic architectures. The effect of oxidant in the ALD process was evaluated and it was shown that H2O outperformed O3 in terms of better uniformity and lower forming voltage. By utilizing a hydrogen-based plasma either after the deposition or inserted as an intermediate step during deposition we were able to further decrease forming voltage for a fixed dielectric thickness. Reducing deposition temperature to 200°C in conjunction with the hydrogen-based plasma treatment offered an additional tuning knob to further reduce forming voltage. Stable high-resistance switching (> 100 kΩ) with analog behavior in scaled BEOL devices was also obtained using this optimized HfO2-based ReRAM. Additionally, a tight distribution of forming voltage was obtained ensuring that 99.9999% devices in a 14 nm ReRAM module can be formed below the targeted voltage. References Kuzum et al., Nanotechnology, 24, 382001 (2013) W. Burr et al., Advanced in Physics:X, 2, 89 (2016)

  • Process-Induced ReRAM Performance Improvement of Atomic Layer Deposited HfO2 for Analog In-Memory Computing Applications

    by Steven Consiglio, Hisashi Higuchi, Takashi Ando, Paul Jamison, Soon-Cheon Seo, Dexin Kong, Youngseok Kim, Kandabara Tapily, Robert D Clark, Marinus Hopstaken, et al.

    We evaluated atomic layer deposition (ALD) for the growth of HfO2 for integration in resistive RAM (ReRAM) test structures on 300mm wafers in order to optimize electrical performance for use as synaptic device elements in analog in-memory computing. The effect of ALD oxidant was evaluated and it was shown that H2O outperformed O3 in terms of better uniformity and lower forming voltage. By utilizing H-based plasma after deposition or inserted as an intermediate step during deposition, we were able to further decrease forming voltage for a fixed dielectric thickness. Reducing deposition temperature to 200°C in conjunction with the H-based plasma treatment resulted in additional reduction in forming voltage. Stable high-resistance switching with analog behavior in scaled BEOL devices was obtained using this HfO2-based ReRAM. Additionally, a tight distribution of forming voltage was obtained ensuring that 99.9999% of devices in a 14nm ReRAM module can be formed below the targeted voltage.


  • Beol Compatible High-Capacitance Mimcap Structure Using ZrO2 with Enhanced Dielectric Constant

    by Paul Jamison, John Massey, Takashi Ando, Eduard A. Cartier, P. J. Chen, Hemanth Jagannathan, Eric Liu, Sebastian Naczas, Vijay Narayanan, Shanti Pancharatnam, et al.

    We demonstrate a MIM capacitor structure using ZrO2 for the dielectric layer which exhibits a 25% capacitance increase (from ~43fF/mm2 to >55fF/mm2 for a ~55 Å film) with minimal leakage current increase compared to Hf based dielectrics, extending the usefulness of MIM on-chip decoupling capacitors. The MIM structure, suitable for BEOL processing is TiN/ZrO2/TiN combined with an anneal which is shown to improve the capacitance vs. leakage performance compared to doped and undoped HfO2 based control structures. GI-XRD measurements demonstrate that the capacitance increase corresponds with a phase transformation of the ZrO2 from amorphous to cubic phase, which is shown to have a dielectric constant (k) up to 35. Reliability models based on hard-breakdown (HBD) show that this structure exceeds the end-of-life targets. Servers and high-performance chips have historically relied on on-chip decoupling capacitors (decap) to reduce power supply noise in order to achieve 3 – 5.4 GHz operating frequency. Although packaging decap can be very effective at mitigating low and mid-frequency noise, on-chip decap, such as MIMCAP, is critical for mitigating mid and high-frequency noise. As Fig. 1 shows, an increase in on-chip decap can result in a significant performance benefit, due to their fast response time slowing the fastest droops, giving time for slower response elements to contribute. One method of achieving this increased decap is to increase the k of the material being used as the insulator in the MIMCAP. Following high-k gate dielectric technology, HfO2 and other Hf based dielectric stacks have been used for this layer successfully [1]. But there is a significant difference in the thermal budget that the dielectric is exposed to following the deposition between gate dielectric and MIMCAP applications. The gate dielectric, deposited prior to any metallization, will typically be exposed to a relatively high thermal budget compared to the insulator layer of a decoupling MIMCAP, which is usually placed between wiring levels in the back end of the line (BEOL) [2]. Since the thermal budget after deposition will affect the crystal structure of a material, and different crystal phases of the same material can have dramatically different dielectric constants [3], the actual dielectric constant of a particular high-k material may vary significantly depending on whether it is used as the gate dielectric or as the MIM insulator. In this work, we explore the use of a ZrO2 as the high- k layer for MIMCAP applications and show that its low crystallization temperature enables it to achieve a significantly higher k value compared to HfO2 when processed under BEOL compatible thermal conditions. Fig. 2 shows the development of the high-k phase of a 55 Å ZrO2 film as the anneal temperature is increased. The peaks at 35°, 42° and 52° are the signature of the bottom TiN electrode and do not change with anneals; but the peaks at 30.2° and 50.3° , which are seen to develop as the anneal temperature increases, match with the 111 and 220 planes of the cubic phase of ZrO2. MIMCAPs built using similarly annealed ZrO2 layers as dielectrics exhibit an increase in capacitance as shown in Fig. 3a: there is a slight increase after anneal A, significantly more increase after anneal B, and additional moderate increases after C and D. No such capacitance increase is seen when Hf based dielectrics are used (Fig. 3b). The maximum capacitance is found to be ~56fF/um2 after anneal D compared to ~43fF/um2 for the unannealed device, an increase of more than 25%, while the leakage current remains virtually unchanged at 1V, and increases by k phase at temperatures relatively lower than is typical for HfO2. Thus, we can achieve high capacitance with a relatively thick high-k layer, keeping the leakage current low, all while maintaining compatibility with BEOL processing. [1] T. Ando et al., “CMOS Compatible MIM Decoupling Capacitor with Reliable Sub-nm EOT High-k Stacks for the 7nm Node and Beyond,” Tech. Dig. IEDM 2016, pp. 9.4.1 - 9.4.4. [2] K. Fischer et al., “Low-k Interconnect Stack with multi-layer Air Gap and Tri-Metal-Insulator-Metal Capacitors for 14-nm High Volume Manufacturing,” IEEE Interconnect Tech. Conf. 2015, 10.1109/IITC-MAM.2015.7325600. [3] X. Zhao and D. Vanderbilt, “First-principles Study of Electronic and Dielectric Properties of ZrO2 and HfO2” MRS Proceedings, 747. doi:10.1557/PROC-747-T5.2/N7.2. Figure 1

  • BEOL Compatible High-Capacitance MIMCAP Structure Using a Novel High k Material

    by Paul C. Jamison, John Massey, Takashi Ando, Eduard A. Cartier, Hemanth Jagannathan, P. J. Chen, Eric Liu, Alex Romero, Sebastian Naczas, Vijay Narayanan, et al.

    We demonstrate a MIM capacitor structure using ZrO2 for the dielectric layer which exhibits a 25% capacitance increase (from ~43fF/mm2 to >55fF/mm2 for a ~55A film) with minimal leakage current increase compared to Hf based dielectrics, extending the usefulness of MIM on-chip decoupling capacitors. The MIM structure, suitable for BEOL processing is TiN/ZrO2/TiN combined with an anneal which is shown to improve the capacitance vs. leakage performance compared to doped and undoped HfO2 based control structures. GI-XRD measurements demonstrate that the capacitance increase corresponds with a phase transformation of the ZrO2 from amorphous to cubic phase, which is shown to have a dielectric constant (k) up to 35. Reliability models based on hard-breakdown (HBD) show that this structure exceeds the end-of-life targets. Servers and high-performance chips have historically relied on on-chip decoupling capacitors (decap) to reduce power supply noise in order to achieve 3 – 5.4 GHz operating frequency. Although packaging decap can be very effective at mitigating low and mid-frequency noise, on-chip decap, such as MIMCAP, is critical for mitigating mid and high-frequency noise. As Fig. 1 shows, an increase in on-chip decap can result in a significant performance benefit, due to their fast response time slowing the fastest droops, giving time for slower response elements to contribute. One method of achieving this increased decap is to increase the k of the material being used as the insulator in the MIMCAP. Following high-k gate dielectric technology, HfO2 and other Hf based dielectric stacks have been used for this layer successfully [1]. But there is a significant difference in the thermal budget that the dielectric is exposed to following the deposition between gate dielectric and MIMCAP applications. The gate dielectric, deposited prior to any metallization, will typically be exposed to a relatively high thermal budget compared to the insulator layer of a decoupling MIMCAP, which is usually placed between wiring levels in the back end of the line (BEOL) [2]. Since the thermal budget after deposition will affect the crystal structure of a material, and different crystal phases of the same material can have dramatically different dielectric constants [3], the actual dielectric constant of a particular high-k material may vary significantly depending on whether it is used as the gate dielectric or as the MIM insulator. In this work, we explore the use of a ZrO2 as the high- k layer for MIMCAP applications and show that its low crystallization temperature enables it to achieve a significantly higher k value compared to HfO2 when processed under BEOL compatible thermal conditions. Fig. 2 shows the development of the high-k phase of a 55A ZrO2 film as the anneal temperature is increased. The peaks at 35, 42 and 52 are the signature of the bottom TiN electrode and do not change with anneals; but the peaks at 30.2 and 50.3 degrees, which are seen to develop as the anneal temperature increases, match with the 111 and 220 planes of the cubic phase of ZrO2. MIMCAPs built using similarly annealed ZrO2 layers as dielectrics exhibit an increase in capacitance as shown in Fig. 3a: there is a slight increase after anneal A, significantly more increase after anneal B, and additional moderate increases after C and D. No such capacitance increase is seen when Hf based dielectrics are used (Fig. 3b). The maximum capacitance is found to be ~56fF/um2 after anneal D compared to ~43fF/um2 for the unannealed device, an increase of more than 25%, while the leakage current remains virtually unchanged at 1V, and increases by 2. Thus, we can achieve high capacitance with a relatively thick high-k layer, keeping the leakage current low, all while maintaining compatibility with BEOL processing. [1] T. Ando et al., “CMOS Compatible MIM Decoupling Capacitor with Reliable Sub-nm EOT High-k Stacks for the 7nm Node and Beyond,” Tech. Dig. IEDM 2016, pp. 9.4.1 - 9.4.4. [2] K. Fischer et al., “Low-k Interconnect Stack with multi-layer Air Gap and Tri-Metal-Insulator-Metal Capacitors for 14-nm High Volume Manufacturing,” IEEE Interconnect Tech. Conf. 2015, 10.1109/IITC-MAM.2015.7325600. [3] X. Zhao and D. Vanderbilt, “First-principles Study of Electronic and Dielectric Properties of ZrO2 and HfO2” MRS Proceedings, 747. doi:10.1557/PROC-747-T5.2/N7.2. Figure 1

  • BEOL Compatible High-Capacitance MIMCAP Structure Using a Novel High k Material

    by Paul C. Jamison, John Massey, Takashi Ando, Eduard A. Cartier, Hemanth Jagannathan, P. J. Chen, Eric Liu, Alex Romero, Sebastian Naczas, Vijay Narayanan, et al.

    We demonstrate a MIM capacitor structure using ZrO2 for the dielectric layer. This exhibits a 25% capacitance increase with minimal leakage current increase compared to Hf based dielectrics, extending the usefulness of MIM on-chip decoupling capacitors. The MIM structure, suitable for BEOL processing is TiN/ZrO2/TiN combined with an anneal which is shown to improve the capacitance vs. leakage performance compared to doped and undoped HfO2 based control structures. GI-XRD measurements demonstrate that the capacitance increase corresponds with a phase transformation from amorphous to cubic phase, which is shown to have a dielectric constant (k) up to 35. Reliability models based on hard-breakdown (HBD) show that this structure exceeds the end-of-life targets.


  • Open Access

    A maximum extreme-value distribution model for switching conductance of oxide-RRAM in memory applications

    by Ernest Wu, Takashi Ando, Youngseok Kim, Ramachandran Muralidhar, Eduard Cartier, Paul Jamison, Miaomiao Wang, Vijay Narayanan

    In this work, we report an extensive experimental investigation of the important statistical properties of resistive random access memory (RRAM) switching conductance. We demonstrate the Gumbel statistics, a maximum extreme-value distribution for switching-filament conductance, as opposed to the minimum extreme-value distribution such as Weibull model. We apply a Poisson random statistical distribution for the spatial generation of percolation filaments to link the RRAM conductance measurements with device areas. As a result, we can derive two important relations: area scaling properties of percentiles and scale-factors. We show the validity of this maximum extreme-value distribution model by rigorously examining the vertical percentile-scaling characteristics of experimental data. The independently extracted shape-factor from the area-dependence of scale-factors captures the merged conductance distributions in good agreement with the experimental conductance data. It is revealed that larger variability associated with RRAM conductance measurements is directly linked to the maximum-valued statistical characteristics of this model. We also demonstrate that RRAM conductance, rather than resistance, is a fundamental statistical variable.


  • Ultrathin nitrided gate dielectrics by plasma-assisted processing

    by E.P. Gusev, D.A. Buchanan, P. Jamison, T.H. Zabel, M. Copel