Nasserdine Papa Mze

Background/Objectives: 16S ribosomal RNA sequencing has, for several years, been the main means of identifying bacterial and archaeal species. Low-throughput Sanger sequencing is often used for the detection and identification of microbial species, but this technique has several limitations. The use of high-throughput sequencers may be a good alternative to improve patient identification, especially for polyclonal infections and management. Kraken 2 and KrakenUniq are free, high-throughput tools providing a very rapid and accurate classification for metagenomic analyses. However, Kraken 2 can present false-positive results relative to KrakenUniq, which can be limiting in hospital settings requiring high levels of accuracy. The aim of this study was to establish an alternative next-generation sequencing technique to replace Sanger sequencing and to confirm that KrakenUniq is an excellent analysis tool that does not present false results relative to Kraken 2. Methods: DNA was extracted from reference bacterial samples for Laboratory Quality Controls (QCMDs) and the V2-V3 and V3-V4 regions of the 16S ribosomal gene were amplified. Amplified products were sequenced with the Illumina 16S Metagenomic Sequencing protocol with minor modifications to adapt and sequence an Illumina 16S library with a small 500-cycle nano-flow cell. The raw files (Fastq) were analyzed on a commercial Smartgene platform for comparison with Kraken 2 and KrakenUniq results. KrakenUniq was used with a standard bacterial database and with the 16S-specific Silva138, RDP11.5, and Greengenes 13.5 databases. Results: Seven of the eight (87.5%) QCMDs were correctly sequenced and identified by Sanger sequencing. The remaining QCMD, QCMD6, could not be identified through Sanger sequencing. All QCMDs were correctly sequenced and identified by MiSeq with the commercial Smartgene analysis platform. QCMD6 contained two bacteria, Acinetobacter and Klebsiella. KrakenUniq identification results were identical to those of Smartgene, whereas Kraken 2 yielded 25% false-positive results. Conclusions: If Sanger identification fails, MiSeq with a small nano-flow cell is a very good alternative for the identification of bacterial species. KrakenUniq is a free, fast, and easy-to-use tool for identifying and classifying bacterial infections.

Djibouti is confronted with malaria resurgence, with malaria having been occurring in epidemic proportions since a decade ago. The current epidemiology of drug-resistant Plasmodium falciparum is not well known. Molecular markers were analyzed by targeted sequencing in 79 P. falciparum clinical isolates collected in Djibouti city in 2023 using the Miseq Illumina platform newly installed in the country. The objective of the study was to analyze the key codons in these molecular markers associated with antimalarial drug resistance. The prevalence of the mutant Pfcrt CVIET haplotype (92%) associated with chloroquine resistance and mutant Pfdhps-Pfdhfr haplotypes (7.4% SGEA and 53.5% IRN, respectively) associated with sulfadoxine-pyrimethamine resistance was high. By contrast, Pfmdr1 haplotypes associated with amodiaquine (YYY) or lumefantrine (NFD) resistance were not observed in any of the isolates. Although the “Asian-type” PfK13 mutations associated with artemisinin resistance were not observed, the “African-type” PfK13 substitution, R622I, was found in a single isolate (1.4%) for the first time in Djibouti. Our genotyping data suggest that most Djiboutian P. falciparum isolates are resistant to chloroquine and sulfadoxine-pyrimethamine but are sensitive to amodiaquine, lumefantrine, and artemisinin. Nonetheless, the presence of an isolate with the R622I PfK13 substitution is a warning signal that calls for a regular surveillance of molecular markers of antimalarial drug resistance.

The rapid genetic evolution of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) during the coronavirus disease 2019 (COVID-19) pandemic has greatly challenged public health authorities worldwide, including in Mauritania. Despite the presence of the virus in Mauritania, only one study described its genomic variation during the course of the epidemic. The purpose of the present study was to document the genomic pattern of SARS-CoV-2 variants from clinical isolates during the COVID-19 outbreak in Mauritania, from September to November 2021. The whole genomes from 54 SARS-CoV-2 strains detected in nasopharyngeal swabs with a cycle threshold value ≤ 30 were successfully sequenced using next-generation sequencing (NGS) and the Illumina protocol. The mean genome coverage (±standard deviation) was 96.8% (±3.7). The most commonly identified clade was 21J (57.4%), followed by 21D (16.7%), 20A (11.1%), and 20B (9.2%). At the level of lineages, the majority of the samples were Delta variants with the sub-lineage AY.34 (or B.1.617.2.34). Among the 54 SARS-CoV-2 isolates that were successfully sequenced, 33 (61.1%) came from vaccinated individuals, and 21 (38.9%) were from unvaccinated individuals. Several SARS-CoV-2 variants were present in Mauritania between September and November 2021. As Mauritania, like many West African countries, is resource-limited regarding viral genome sequencing facilities, establishment of mutualized sub-regional sequencing platforms will be necessary to ensure continuous monitoring of mutations in viral genomes and track potential reduction in COVID-19 vaccine efficacy, increased transmissibility, and disease severity.

Genotypic testing is often recommended to improve the management of patients infected with human immunodeficiency virus (HIV). To help combat this major pandemic, next-generation sequencing (NGS) techniques are widely used to analyse resistance to antiretroviral drugs. In this study, we used a Vela Sentosa kit (Vela Diagnostics, Kendall, Singapore), which is usually used for the Ion Torrent personal genome machine (PGM) platform, to sequence HIV using the Illumina Miseq platform. After RNA extraction and reverse transcriptase-polymerase chain reaction (RT-PCR), minor modifications were applied to the Vela Sentosa kit to adapt it to the Illumina Miseq platform. Analysis of the results showed the same mutations present in the samples using both sequencing platforms. The total number of reads varied from 185,069 to 752,343 and from 642,162 to 2,074,028 in the Ion Torrent PGM platform and the Illumina Miseq platform, respectively. The average depth was 21,955 and 46,856 for Ion Torrent PGM and Illumina Miseq platforms, respectively. The cost of sequencing a run of eight samples was quite similar between the two platforms (about USD 1790 for Illumina Miseq and about USD 1833 for Ion Torrent PGM platform). We have shown for the first time that it is possible to adapt and use the Vela Sentosa kit for the Illumina Miseq platform to obtain high-quality results with a similar cost.

Antimalarial drug resistance has become a real public health problem despite WHO measures. New sequencing technologies make it possible to investigate genomic variations associated with resistant phenotypes at the genome-wide scale. Based on the use of hemisynthetic nanopores, the PromethION technology from Oxford Nanopore Technologies can produce long-read sequences, in contrast to previous short-read technologies used as the gold standard to sequence Plasmodium. Two clones of P. falciparum (Pf3D7 and PfW2) were sequenced in long-read using the PromethION sequencer from Oxford Nanopore Technologies without genomic amplification. This made it possible to create a processing analysis pipeline for human Plasmodium with ONT Fastq only. De novo assembly revealed N50 lengths of 18,488 kb and 17,502 kb for the Pf3D7 and PfW2, respectively. The genome size was estimated at 23,235,407 base pairs for the Pf3D7 clone and 21,712,038 base pairs for the PfW2 clone. The average genome coverage depth was estimated at 787X and 653X for the Pf3D7 and PfW2 clones, respectively. This study proposes an assembly processing pipeline for the human Plasmodium genome using software adapted to large ONT data and the high AT percentage of Plasmodium. This search provides all the parameters which were optimized for use with the software selected in the pipeline.

Until 2020, Djiboutian health authorities relied on histidine-rich protein-2 (HRP2)-based rapid diagnostic tests (RDTs) to establish the diagnosis of Plasmodium falciparum. The rapid spread of P. falciparum histidine-rich protein-2 and -3 (pfhrp2/3) gene-deleted parasite strains in Djibouti has led the authorities to switch from HRP2-based RDTs to lactate dehydrogenase (LDH)-based RDTs targeting the plasmodial lactate dehydrogenase (pLDH) specific for P. falciparum and P. vivax (RapiGEN BIOCREDIT Malaria Ag Pf/Pv pLDH/pLDH) in 2021. This study was conducted with the primary objective of evaluating the diagnostic performance of this alternative RDT. Operational constraints related, in particular, to the implementation of this RDT during the COVID-19 pandemic were also considered. The performance of BIOCREDIT Malaria Ag Pf/Pv (pLDH/pLDH) RDT was also compared to our previously published data on the performance of two HRP2-based RDTs deployed in Djibouti in 2018–2020. The diagnosis of 350 febrile patients with suspected malaria in Djibouti city was established using two batches of RapiGEN BIOCREDIT Malaria Ag Pf/Pv (pLDH/pLDH) RDT over a two-year period (2022 and 2023) and confirmed by real-time quantitative polymerase chain reaction. The sensitivity and specificity for the detection of P. falciparum were 88.2% and 100%, respectively. For P. vivax, the sensitivity was 86.7% and the specificity was 100%. Re-training and closer supervision of the technicians between 2022 and 2023 have led to an increased sensitivity to detect P. falciparum (69.8% in 2022 versus 88.2% in 2023; p < 0.01). The receiver operating characteristic curve analysis highlighted a better performance in the diagnosis of P. falciparum with pLDH-based RDTs compared with previous HRP2-based RDTs. In Djibouti, where pfhrp2-deleted strains are rapidly gaining ground, LDH-based RDTs seem to be more suitable for diagnosing P. falciparum than HRP2-based RDTs. Awareness-raising and training for technical staff have also been beneficial.

Genotypic testing is often recommended to improve the management of patients infected with human immunodeficiency virus (HIV). To help combat this major pandemic, next-generation sequencing (NGS) techniques are widely used to analyse resistance to antiretroviral drugs. In this study, we used a Vela Sentosa kit, which is usually used for the Ion Torrent personal genome machine (PGM) platform, to sequence HIV using the Illumina Miseq platform. After RNA extraction and reverse transcriptase-polymerase chain reaction (RT-PCR), minor modifications were applied to the Vela Sentosa kit to adapt it to Illumina Miseq platform. Analysis of the results showed the same mutations present in the samples using both sequencing platforms. The total number of reads varied from 185,069 to 752,343 and from 642,162 to 2,074,028 in the Ion Torrent PGM platform and the Illumina Miseq platform, respectively. The average depth was 21955 and 46856 for Ion Torrent PGM and Illumina Miseq platforms, respectively. The cost of sequencing a run of eight samples was closely similar between the two platforms (about 1 790 United States dollars [USD] for Illumina Miseq and about 1833 USD for Ion Torrent PGM platform). We have shown for the first time that it is possible to adapt and use the Vela Sentosa kit for the Illumina Miseq platform to obtain high quality results with a similar cost.

Antimalarial drug resistance has become a real public health problem despite WHO measures. New sequencing technologies make it possible to investigate genomic variations associated with resistant phenotypes at the genome-wide scale. Based on the use of hemisynthetic nanopores, the PromethION technology from Oxford Nanopore Technologies can produce long-read sequences, in contrast to previous short-read technologies used as gold-standard to sequence Plasmodium. Two clones of P.falciparum (Pf3D7 and PfW2) were sequenced in long-read using the PromethION sequencer from Oxford Nanopore Technologies without genomic amplification. This made it possible to create a processing analysis pipeline for human Plasmodium with ONT Fastq only. De novo assembly revealed N50 lengths of 18,488 kb and 17,502 kb for the Pf3D7 and PfW2, respectively. The genome size was estimated at 23,235,407 base pairs for the Pf3D7 clone and 21,712,038 base pairs for the PfW2 clone. The average genome coverage depth was estimated at 787X and 653X for the Pf3D7 and PfW2 clones, respectively. This study proposes an assembly processing pipeline for the human Plasmodium genome using software’s adapted to large ONT data and the high AT percentage of Plasmodium. This search provides all the parameters, which have been optimized, for use with the software selected in the pipeline.

The emergence of the Coronavirus Disease 2019 (COVID-19) pandemic has fostered the use of high-throughput techniques to sequence the entire severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) genome and track its evolution. The present study proposes a rapid and relatively less expensive sequencing protocol for 384 samples by adapting the use of an Illumina NovaSeq library to an Illumina MiSeq flow cell instrument. The SARS-CoV-2 genome sequences obtained with Illumina NovaSeq and those obtained using MiSeq instruments were compared with the objective to validate the new, modified protocol. A total of 356 (94.6%) samples yielded interpretable sequences using the modified Illumina COVIDSeq protocol, with an average coverage of 91.6%. By comparison, 357 (94.9%) samples yielded interpretable sequences with the standard COVIDSeq protocol, with an average coverage of 95.6%. Our modified COVIDSeq protocol could save 14,155 euros per run and yield results from 384 samples in 53.5 h, compared to four times 55.5 h with the standard Illumina MiSeq protocol. The modified COVIDSeq protocol thus provides high quality results comparable to those obtained with the standard COVIDSeq protocol, four times faster, while saving money.

In the present study, we propose a high-throughput sequencing protocol using aNextera XT Library DNA kit on an Illumina MiSeq instrument. We made major modifications to this library preparation in order to multiplex 384 samples in a single Illumina flow cell. To validate our protocol, we compared the sequences obtained with the modified Illumina protocol to those obtained with the GridION Nanopore protocol. For the modified Illumina protocol, our results showed that 94.9% (357/376) of the sequences were interpretable, with a viral genome coverage between 50.5% and 99.9% and an average depth of 421×. For the GridION Nanopore protocol, 94.6% (356/376) of the sequences were interpretable, with a viral genome coverage between 7.0% and 98.6% and an average depth of 2123×. The modified Illumina protocol allows for gaining EUR 4744 and returning results of 384 samples in 53.5 h versus four times 55.5 h with the standard Illumina protocol. Our modified MiSeq protocol yields similar genome sequence data as the GridION Nanopore protocol and has the advantage of being able to handle four times more samples simultaneously and hence is much less expensive.