Chandra Sekhar Espenti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chandra Sekhar Espenti has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Kummara Madhusudana Rao
4 shared publicationsK.S.V. Krishna Rao
3 shared publicationsSung Soo Han
3 shared publications- Y. V. Rami Reddy
Sri Venkateswara University
3 shared publications A. G. Rama Krishna
Department of Chemistry, Physical Chemistry Laboratory, Sri Venkateswara University, Tirupati, India
2 shared publications- Kundana Nakkala
B.V. Raju Institute of Technology
2 shared publications
Latest Publications
- Open Access
- 14 June 2026
- Published by Wiley in Packaging Technology and Science
- Vol. 39 (9) , 1141-1178
Sustainable Polymer Biocomposites for Food Packaging: Green Nanotechnology, Circular Plastic Upcycling and Smart Functional Materials
The fundamental hypothesis behind this review is that the combination of biodegradable polymer‐based biocomposites, which also have incorporated multifunctional nanomaterials, can lead to food packaging that is both sustainable and of high quality. In recent studies, biocomposites that have been made using PLA, PHA and starch mixtures with natural fibre reinforcements and nanofillers have been found to display superior mechanical properties and barrier characteristics, such as a decrease of 25%–50% in oxygen permeability rate. Further, the inclusion of additional additives like nanoparticles that possess antimicrobial properties and antioxidants derived from nature provides for active packaging functionality, with the efficiency of microorganism removal reaching as much as 99.9%. The combination of stimuli‐sensitive sensors along with nano‐components also facilitates intelligent packaging development, which allows real‐time monitoring of freshness.
- 14 June 2026
- Published by Wiley in Packaging Technology and Science
- Vol. 39 (9) , 1141-1178
Open AccessSustainable Polymer Biocomposites for Food Packaging: Green Nanotechnology, Circular Plastic Upcycling and Smart Functional Materials
The fundamental hypothesis behind this review is that the combination of biodegradable polymer‐based biocomposites, which also have incorporated multifunctional nanomaterials, can lead to food packaging that is both sustainable and of high quality. In recent studies, biocomposites that have been made using PLA, PHA and starch mixtures with natural fibre reinforcements and nanofillers have been found to display superior mechanical properties and barrier characteristics, such as a decrease of 25%–50% in oxygen permeability rate. Further, the inclusion of additional additives like nanoparticles that possess antimicrobial properties and antioxidants derived from nature provides for active packaging functionality, with the efficiency of microorganism removal reaching as much as 99.9%. The combination of stimuli‐sensitive sensors along with nano‐components also facilitates intelligent packaging development, which allows real‐time monitoring of freshness.
- 22 August 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (5)
Polymer nanocomposites for the environmental remediation of contaminated water bodies
- 22 August 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (5)
Polymer nanocomposites for the environmental remediation of contaminated water bodies
- 26 July 2025
- Published by Springer Nature
- p. 49-71
Carbohydrate Polymeric Nanocomposites for Biological Applications
- 26 July 2025
- Published by Springer Nature
- p. 49-71
Carbohydrate Polymeric Nanocomposites for Biological Applications
- 21 July 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 158
Polymeric Hydrogels for Hydrogen (H2) Storage: A Comprehensive Review
- 21 July 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 158
Polymeric Hydrogels for Hydrogen (H2) Storage: A Comprehensive Review
- 2 July 2025
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 393
pH-responsive polymer hydrogel nanocomposites for sensor applications: A review
- 2 July 2025
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 393
pH-responsive polymer hydrogel nanocomposites for sensor applications: A review
- Open Access
- 27 December 2022
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 35 (1) , 99-108
Effect of Zr-Nanofiller on Structural and Thermal Properties of PVDF-co-HFP Porous Polymer Electrolyte Membranes Doped with Mg2+ Ions
New poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP)/ZrO2-based nanocomposite porous polymer membranes were prepared with doping of magnesium ions using THF as solvent. These membranes were prepared using the solvent casting technique. The optimal nanofiller (0, 2, 4, 6, 8 and 10% Zr nanopowder) was incorporated into the PVDF-co-HFP/MgTf3/ZrO2 and the incorporation of the nanofiller results in an increase in the porosity of the prepared membranes. The structural, morphological and thermal properties of the nanocomposite porous polymer membranes were also investigated. The structural investigation and the identification of functional groups were accomplished using FTIR technique. X-ray diffraction (XRD) analysis was performed to ascertain the phase of polymer membranes and the phase change that happens upon interaction with nanofiller and Mg2+ ions. Assessment of the nanocomposite porous polymer membrane's morphology and porous structure was performed using a scanning electron microscope (SEM). DSC analysis was used to evaluate the thermal behaviour of the nanocomposite porous membranes. The electrical and dielectric studies confirmed the structural reformation of the polymer electrolyte materials. It was found that 8% nanofiller is the best conducting composition for maximum ionic conductivity, dielectric constant and Mg2+ ion mobility. The incorporation of ZrO2 nanofiller predominantly increases the number of free ions and mobility of the charge carriers in the composite polymer electrolyte systems.
- 27 December 2022
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 35 (1) , 99-108
Open AccessEffect of Zr-Nanofiller on Structural and Thermal Properties of PVDF-co-HFP Porous Polymer Electrolyte Membranes Doped with Mg2+ Ions
New poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP)/ZrO2-based nanocomposite porous polymer membranes were prepared with doping of magnesium ions using THF as solvent. These membranes were prepared using the solvent casting technique. The optimal nanofiller (0, 2, 4, 6, 8 and 10% Zr nanopowder) was incorporated into the PVDF-co-HFP/MgTf3/ZrO2 and the incorporation of the nanofiller results in an increase in the porosity of the prepared membranes. The structural, morphological and thermal properties of the nanocomposite porous polymer membranes were also investigated. The structural investigation and the identification of functional groups were accomplished using FTIR technique. X-ray diffraction (XRD) analysis was performed to ascertain the phase of polymer membranes and the phase change that happens upon interaction with nanofiller and Mg2+ ions. Assessment of the nanocomposite porous polymer membrane's morphology and porous structure was performed using a scanning electron microscope (SEM). DSC analysis was used to evaluate the thermal behaviour of the nanocomposite porous membranes. The electrical and dielectric studies confirmed the structural reformation of the polymer electrolyte materials. It was found that 8% nanofiller is the best conducting composition for maximum ionic conductivity, dielectric constant and Mg2+ ion mobility. The incorporation of ZrO2 nanofiller predominantly increases the number of free ions and mobility of the charge carriers in the composite polymer electrolyte systems.
- Open Access
- 31 October 2022
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 38 (5) , 1138-1147
Effect of PMMA on PVDF-co-HFP/MgTf3 Polymer Composite with Improved Ionic Conductivity, Thermal and Structural Properties
Polymer blend electrolytes composed of poly(vinylidene fluoride-co-hexafluoro-propylene) (PVDF-co-HFP), poly(methyl methacrylate) (PMMA) and 1•0 M magnesium trifluoromethanesulfonate (MgTf3) as salt have been synthesized using solution caste technique by varying the PMMA@PVDF-co-HFP/Mg2+ blend concentration ratio systematically. However, Mg2+ ions interaction with electrode materials and electrolyte molecules results in slow Mg2+ dissociation and diffusion, which in turn leads to inadequate power density and cycle stability. X-ray diffraction (XRD), FTIR, scanning electron microscopy (SEM), Differential scanning calorimetry (DSC), complex impedance spectroscopy, linear sweep voltammetry, AC and DC ionic conductivity studies were used to examine the impact of compositional modification of PMMA in the composite gel polymer electrolyte system. The PVDF-co-HFP/Mg2+ and PMMA@PVDF-co-HFP /Mg2+ mix-based solid polymer electrolyte membrane provides optimal ionic conductivity of 8.014×10-6 and 5.612×10-5 at ambient temperature, and the ionic conductivity of the system rises with increasing PMMA content. Scanning electron microscopy and x-ray diffraction analyses validate the improved ionic conductivity. Electrical conductivity was measured using electrochemical impedance spectroscopy at temperatures ranging from 303 to 363 K. Changes in temperature and PMMA concentration cause an increase in ionic conductivity. Loss tangent and imaginary part of modulus (M"), which relate to dielectric and conductivity relaxation, respectively, demonstrate a quicker relaxation process as PMMA concentration increases up to an optimal value. The modulus (M") demonstrates that the conductivity relaxation is not of the Debye type (broader than the Debye peak).
- 31 October 2022
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 38 (5) , 1138-1147
Open AccessEffect of PMMA on PVDF-co-HFP/MgTf3 Polymer Composite with Improved Ionic Conductivity, Thermal and Structural Properties
Polymer blend electrolytes composed of poly(vinylidene fluoride-co-hexafluoro-propylene) (PVDF-co-HFP), poly(methyl methacrylate) (PMMA) and 1•0 M magnesium trifluoromethanesulfonate (MgTf3) as salt have been synthesized using solution caste technique by varying the PMMA@PVDF-co-HFP/Mg2+ blend concentration ratio systematically. However, Mg2+ ions interaction with electrode materials and electrolyte molecules results in slow Mg2+ dissociation and diffusion, which in turn leads to inadequate power density and cycle stability. X-ray diffraction (XRD), FTIR, scanning electron microscopy (SEM), Differential scanning calorimetry (DSC), complex impedance spectroscopy, linear sweep voltammetry, AC and DC ionic conductivity studies were used to examine the impact of compositional modification of PMMA in the composite gel polymer electrolyte system. The PVDF-co-HFP/Mg2+ and PMMA@PVDF-co-HFP /Mg2+ mix-based solid polymer electrolyte membrane provides optimal ionic conductivity of 8.014×10-6 and 5.612×10-5 at ambient temperature, and the ionic conductivity of the system rises with increasing PMMA content. Scanning electron microscopy and x-ray diffraction analyses validate the improved ionic conductivity. Electrical conductivity was measured using electrochemical impedance spectroscopy at temperatures ranging from 303 to 363 K. Changes in temperature and PMMA concentration cause an increase in ionic conductivity. Loss tangent and imaginary part of modulus (M"), which relate to dielectric and conductivity relaxation, respectively, demonstrate a quicker relaxation process as PMMA concentration increases up to an optimal value. The modulus (M") demonstrates that the conductivity relaxation is not of the Debye type (broader than the Debye peak).
- Open Access
- 17 August 2022
- Published by Springer Nature in Research Square
Plant-Extract-Assisted Eco-friendly synthesis of Iron oxide nanoparticles using cape gooseberry Extract and their Antibacterial study
Cape gooseberry plant leaf extract mediated iron oxide nanoparticles (CG-IONPs) were prepared for the antibacterial study. The optimum precursor salt concentration, pH of the reaction mixture, the ratio between reducing agent and precursor salt, and time for the synthesis of iron nanoparticles were found to be 5 mM, 9.0, 3:7, and 0th, respectively. The synthesized iron nanoparticles were characterized by UV/Vis absorption spectroscopy, Photoluminescence Spectroscopy (PL), Transmission Electron Microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Thermal Analysis (TG/DTA), and Fourier transform infrared spectroscopy (FTIR). A FTIR measurement was carried out to identify the possible molecules like carbonyl, CH, and OH bands which were responsible for the reduction and formation of the nanoparticles. From the X-ray diffraction (XRD) method, it was found that the average particle size of magnetite nanoparticles was found to be 24.18 nm. TEM analysis has been carried out to determine the size and shape of the synthesized CG-IONPs. The thermal stability of the synthesized CG-IONPs was tested by performing TG/DTA analysis, using a nitrogen atmosphere. XPS analysis was carried out to measure the elemental composition and oxidation states of the elements present in CG-IONPs. The PL analysis has been employed in the present study to explore the luminescent character of CG-IONPs. The synthesized CG-IONPs had antibacterial activity against pathogenic bacteria like Staphylococcus aureus, Streptococcus agalactiae, Escherichia coli, and Salmonella enterica by the well diffusion method. This biosynthesis method has been found to be cost-effective, good for the environment, and likely to be useful in many fields.
- 17 August 2022
- Published by Springer Nature in Research Square
Open AccessPlant-Extract-Assisted Eco-friendly synthesis of Iron oxide nanoparticles using cape gooseberry Extract and their Antibacterial study
Cape gooseberry plant leaf extract mediated iron oxide nanoparticles (CG-IONPs) were prepared for the antibacterial study. The optimum precursor salt concentration, pH of the reaction mixture, the ratio between reducing agent and precursor salt, and time for the synthesis of iron nanoparticles were found to be 5 mM, 9.0, 3:7, and 0th, respectively. The synthesized iron nanoparticles were characterized by UV/Vis absorption spectroscopy, Photoluminescence Spectroscopy (PL), Transmission Electron Microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Thermal Analysis (TG/DTA), and Fourier transform infrared spectroscopy (FTIR). A FTIR measurement was carried out to identify the possible molecules like carbonyl, CH, and OH bands which were responsible for the reduction and formation of the nanoparticles. From the X-ray diffraction (XRD) method, it was found that the average particle size of magnetite nanoparticles was found to be 24.18 nm. TEM analysis has been carried out to determine the size and shape of the synthesized CG-IONPs. The thermal stability of the synthesized CG-IONPs was tested by performing TG/DTA analysis, using a nitrogen atmosphere. XPS analysis was carried out to measure the elemental composition and oxidation states of the elements present in CG-IONPs. The PL analysis has been employed in the present study to explore the luminescent character of CG-IONPs. The synthesized CG-IONPs had antibacterial activity against pathogenic bacteria like Staphylococcus aureus, Streptococcus agalactiae, Escherichia coli, and Salmonella enterica by the well diffusion method. This biosynthesis method has been found to be cost-effective, good for the environment, and likely to be useful in many fields.
- 27 July 2022
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 62 (2) , 145-161
Facile fabrication of NiO doped PVDF-co-HFP/Mg(ClO4)2polymer composite membrane as a counter electrode in low-cost dye-sensitized solar cells
Poly(vinylidene co-hexafluoropropylene) (PVDF-HFP) has gained considerable attention as an alternative to the commercial separators in energy devices. NiO nanofiller-based solid polymer composite electrolytic thin membranes (PVDF-co-HFP:Mg(ClO4)2:NiO) were prepared using solid PVDF-co-HFP copolymer and Mg(ClO4)2via the solution-casting method. The obtained thin membranes were structurally characterized by FTIR, the porosity of the membrane was analyzed by scanning electron microscope (SEM) and an optimum SEM micrograph of 20.0 μm magnification was taken to analyze the exact porous diameter distribution frequency. XRD analysis was used to confirm the physical state of the PVDF-co-HFP membrane and the composite membrane of (PVDF-co-HFP:Mg(ClO4)2:NiO). Structural studies related to XRD peaks were broadened at an optimized Mg(ClO4)2 salt concentration, confirming the presence of maximum amorphous content in the PVDF-co-HFP:Mg(ClO4)2 composite. Using the Nyquist plot, the ohmic resistance (RΩ), polarization resistance (RP), and Warburg impedance (W) were determined to be at their lowest values for an optimum concentration of NiO nanofiller in the PVDF-co-HFP:Mg(ClO4)2:NiO composite. The homogeneous dispersion of the nanofiller significantly improved the contact between electrode and electrolyte interfaces, resulting in high ionic conductivity. The DC and AC ionic conductivities of the pure PVDF-co-HFP and composite membrane of (PVDF-co-HFP:Mg(ClO4)2:NiO) was studied by electrochemical impedance spectroscopy (EIS), and the optimum ionic conductivity was estimated as . A spin-coating technique was employed to prepare dye-sensitized solar cells (DSSC). The fill factor and efficiency ( = 11.12532 were estimated from the J-V graph. Graphical Abstract- 27 July 2022
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 62 (2) , 145-161
Facile fabrication of NiO doped PVDF-co-HFP/Mg(ClO4)2polymer composite membrane as a counter electrode in low-cost dye-sensitized solar cells
Poly(vinylidene co-hexafluoropropylene) (PVDF-HFP) has gained considerable attention as an alternative to the commercial separators in energy devices. NiO nanofiller-based solid polymer composite electrolytic thin membranes (PVDF-co-HFP:Mg(ClO4)2:NiO) were prepared using solid PVDF-co-HFP copolymer and Mg(ClO4)2via the solution-casting method. The obtained thin membranes were structurally characterized by FTIR, the porosity of the membrane was analyzed by scanning electron microscope (SEM) and an optimum SEM micrograph of 20.0 μm magnification was taken to analyze the exact porous diameter distribution frequency. XRD analysis was used to confirm the physical state of the PVDF-co-HFP membrane and the composite membrane of (PVDF-co-HFP:Mg(ClO4)2:NiO). Structural studies related to XRD peaks were broadened at an optimized Mg(ClO4)2 salt concentration, confirming the presence of maximum amorphous content in the PVDF-co-HFP:Mg(ClO4)2 composite. Using the Nyquist plot, the ohmic resistance (RΩ), polarization resistance (RP), and Warburg impedance (W) were determined to be at their lowest values for an optimum concentration of NiO nanofiller in the PVDF-co-HFP:Mg(ClO4)2:NiO composite. The homogeneous dispersion of the nanofiller significantly improved the contact between electrode and electrolyte interfaces, resulting in high ionic conductivity. The DC and AC ionic conductivities of the pure PVDF-co-HFP and composite membrane of (PVDF-co-HFP:Mg(ClO4)2:NiO) was studied by electrochemical impedance spectroscopy (EIS), and the optimum ionic conductivity was estimated as . A spin-coating technique was employed to prepare dye-sensitized solar cells (DSSC). The fill factor and efficiency ( = 11.12532 were estimated from the J-V graph. Graphical Abstract