Philipp John
Research Subjects
Research Interests
Philipp John has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Jonas Lähnemann
Paul-Drude-Institut für Festkörperelektronik, Leibniz-Institut im Forschungsverbund Berlin e.V., Hausvogteiplatz 5–7, 10117 Berlin, Germany
5 shared publications - Oliver Brandt
Paul-Drude-Institut für Festkörperelektronik
5 shared publications Achim Trampert
Paul-Drude-Institut für Festkörperelektronik, Leibniz-Institut im Forschungsverbund Berlin e.V., Hausvogteiplatz 5–7, 10117 Berlin, Germany
4 shared publicationsLutz Geelhaar
4 shared publications- Thomas Auzelle
Paul-Drude-Institut für Festkörperelektronik, Leibniz-Institut im Forschungsverbund Berlin e.V., Hausvogteiplatz 5-7, 10117 Berlin, Germany
4 shared publications Domenik Spallek
3 shared publications
Latest Publications
- 6 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
MBE-growth and characterization of Zn3N2 and Mg3N2 : from epitaxy to materials science
Croissance EJM et caractérisation de Zn3N2 et Mg3N2 : de l’épitaxie à la science des matériaux: Les semi-conducteurs cubiques à base de nitrures du groupe II sont presque inconnus dans la communauté scientifique, même si beaucoup d'entre eux sont constitués d'éléments présents en abondance sur terre. Le Zn3_ N2_ et le Mg3_ N2_, par exemple, ne sont pas toxiques et ont des bandes interdites d'environ 1 eV et 3 eV, respectivement, ce qui en fait des candidats intéressants pour des applications dans des dispositifs optoélectroniques. Cependant, afin d'évaluer la potentialité de ces matériaux pour des applications, il est nécessaire de les synthétiser avec une qualité cristalline suffisamment élevée et de caractériser leurs propriétés physiques fondamentales.Dans le cadre de cette thèse, nous développons la croissance épitaxiale de couches minces de Zn3_ N2_ et de Mg3_ N2_ par EJM. Afin d’éviter la décomposition des films minces de Mg3_ N2_ à l'air, des couches de protection de MgO polycrystallin ont été déposées in-situ dans la chambre d’EJM. Cette couche augmente la durée de vie du Mg3_ N2_ passant de quelques minutes à plusieurs semaines à l'air, permettant ainsi une caractérisation approfondie. L'orientation des couches minces, à la fois de Zn3_ N2_ et de Mg3_ N2_, sur des substrats de MgO (100) peut être contrôlée à façon, passant de (100) à (111) suite à une variation des conditions de croissance. Par ailleurs, le Zn3_ N2_ (100) est épitaxié sur YSZ (100) et Mg3_ N2_ le (111) est épitaxié sur des substrats YSZ (100) et MgO (111). Les relations épitaxiales et la qualité structurale de chaque combinaisons couche mince-substrat ont été déterminées en utilisant la diffraction d'électrons à haute énergie en incidence rasante, la diffraction de rayons X et / ou la microscopie électronique en transmission. Grâce à cela nous pouvons proposer une image précise de l'épitaxie de nitrures du groupe II et de leur microstructure, jamais rapportée précédemment dans la littérature. En plus de leurs propriétés structurales, nous avons exploré certaines des propriétés physiques fondamentales du Zn3_ N2_ et du Mg3_ N2_. En raison de la sensibilité des nitrures du groupe II à l'humidité, une détermination fiable de la bande interdite optique du Zn3_ N2_ et du Mg3_ N2_ est difficile. En utilisant des mesures de photoluminescence, de réflectance diffuse et de transmittance, nous avons mesuré la bande interdite de Mg3_ N2_, sur nos couches minces, et dont la valeur est 2.9 eV à température ambiante. Nous avons mesuré aussi celle du Zn3_ N2_ en fonction de la concentration de porteurs qui vaut 1.0 eV à température ambiante (et se décale vers le bleu en raison de l'effet Moss-Burstein). Alors que les couches minces de Zn3_ N2_ sont de type n et dégénérées, avec des concentrations de porteurs entre 10〖19〗^ cm〖-3〗^ et 10〖21〗^ cm〖-3〗^, les couches minces de Mg3_ N2_ se révèlent être électriquement isolantes. Enfin, la dilatation du réseau cristallin hors plan était surveillée en fonction de la température pour les couches minces de Zn3_ N2_ et Mg3_ N2_, permettant l'extraction de leurs coefficients de dilatation thermiques, des paramètres importants pour la conception d'hétérostructures épitaxiales. Nous avons établi des valeurs moyennes de 1.5 × 10〖-5〗^ K〖-1〗^ et 1.1 × 10〖-5〗^ K〖-1〗^ dans une gamme de température de 300 K à 700 K - 800 K pour Zn3_ N2_ et Mg3_ N2_, respectivement, trois à quatre fois plus élevées que celles des nitrures du groupe III.
- 6 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
MBE-growth and characterization of Zn3N2 and Mg3N2 : from epitaxy to materials science
Croissance EJM et caractérisation de Zn3N2 et Mg3N2 : de l’épitaxie à la science des matériaux: Les semi-conducteurs cubiques à base de nitrures du groupe II sont presque inconnus dans la communauté scientifique, même si beaucoup d'entre eux sont constitués d'éléments présents en abondance sur terre. Le Zn3_ N2_ et le Mg3_ N2_, par exemple, ne sont pas toxiques et ont des bandes interdites d'environ 1 eV et 3 eV, respectivement, ce qui en fait des candidats intéressants pour des applications dans des dispositifs optoélectroniques. Cependant, afin d'évaluer la potentialité de ces matériaux pour des applications, il est nécessaire de les synthétiser avec une qualité cristalline suffisamment élevée et de caractériser leurs propriétés physiques fondamentales.Dans le cadre de cette thèse, nous développons la croissance épitaxiale de couches minces de Zn3_ N2_ et de Mg3_ N2_ par EJM. Afin d’éviter la décomposition des films minces de Mg3_ N2_ à l'air, des couches de protection de MgO polycrystallin ont été déposées in-situ dans la chambre d’EJM. Cette couche augmente la durée de vie du Mg3_ N2_ passant de quelques minutes à plusieurs semaines à l'air, permettant ainsi une caractérisation approfondie. L'orientation des couches minces, à la fois de Zn3_ N2_ et de Mg3_ N2_, sur des substrats de MgO (100) peut être contrôlée à façon, passant de (100) à (111) suite à une variation des conditions de croissance. Par ailleurs, le Zn3_ N2_ (100) est épitaxié sur YSZ (100) et Mg3_ N2_ le (111) est épitaxié sur des substrats YSZ (100) et MgO (111). Les relations épitaxiales et la qualité structurale de chaque combinaisons couche mince-substrat ont été déterminées en utilisant la diffraction d'électrons à haute énergie en incidence rasante, la diffraction de rayons X et / ou la microscopie électronique en transmission. Grâce à cela nous pouvons proposer une image précise de l'épitaxie de nitrures du groupe II et de leur microstructure, jamais rapportée précédemment dans la littérature. En plus de leurs propriétés structurales, nous avons exploré certaines des propriétés physiques fondamentales du Zn3_ N2_ et du Mg3_ N2_. En raison de la sensibilité des nitrures du groupe II à l'humidité, une détermination fiable de la bande interdite optique du Zn3_ N2_ et du Mg3_ N2_ est difficile. En utilisant des mesures de photoluminescence, de réflectance diffuse et de transmittance, nous avons mesuré la bande interdite de Mg3_ N2_, sur nos couches minces, et dont la valeur est 2.9 eV à température ambiante. Nous avons mesuré aussi celle du Zn3_ N2_ en fonction de la concentration de porteurs qui vaut 1.0 eV à température ambiante (et se décale vers le bleu en raison de l'effet Moss-Burstein). Alors que les couches minces de Zn3_ N2_ sont de type n et dégénérées, avec des concentrations de porteurs entre 10〖19〗^ cm〖-3〗^ et 10〖21〗^ cm〖-3〗^, les couches minces de Mg3_ N2_ se révèlent être électriquement isolantes. Enfin, la dilatation du réseau cristallin hors plan était surveillée en fonction de la température pour les couches minces de Zn3_ N2_ et Mg3_ N2_, permettant l'extraction de leurs coefficients de dilatation thermiques, des paramètres importants pour la conception d'hétérostructures épitaxiales. Nous avons établi des valeurs moyennes de 1.5 × 10〖-5〗^ K〖-1〗^ et 1.1 × 10〖-5〗^ K〖-1〗^ dans une gamme de température de 300 K à 700 K - 800 K pour Zn3_ N2_ et Mg3_ N2_, respectivement, trois à quatre fois plus élevées que celles des nitrures du groupe III.
- Open Access
Molecular Beam Epitaxy of Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N Nanowires: Towards Group-III Nitride Piezoelectric Nanogenerators with Enhanced Response
We study the molecular beam epitaxy of self-assembled Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N nanowires on conductive TiN layers and demonstrate their application in piezoelectric nanogenerators. Wurtzite Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N nanowires with uniform Sc incorporation are grown across a wide composition range (0<x<0.35). At substrate temperatures below 700 $^\circ{}$C, these nanowires exhibit an inversely tapered morphology, whereas higher temperatures favor the nucleation of additional branches due to a phase separation of Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N into wurtzite AlN and rock-salt ScN. Phase-pure Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N nanowires are integrated into vertical nanogenerators, where the metallic TiN substrate serves as bottom electrode. The fabricated polymer-nanowire composite devices achieve effective piezoelectric charge coefficients of up to 8.5 pC N$^{-1}$ at x=0.32, thus exceeding the piezoelectric response of bulk AlN by nearly a factor of two. Although the charge response remains lower compared to Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N thin films, the reduced effective dielectric permittivity of the nanowire-polymer composites compensates the reduction in piezoelectric charge coefficient, eventually yielding a higher voltage response and comparable energy harvesting efficiency. Finally, effective medium modeling reveals that the device architecture is the primary factor limiting performance, providing general design principles for highly efficient nanowire-based piezoelectric energy harvesters.Open AccessMolecular Beam Epitaxy of Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N Nanowires: Towards Group-III Nitride Piezoelectric Nanogenerators with Enhanced Response
We study the molecular beam epitaxy of self-assembled Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N nanowires on conductive TiN layers and demonstrate their application in piezoelectric nanogenerators. Wurtzite Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N nanowires with uniform Sc incorporation are grown across a wide composition range (0<x<0.35). At substrate temperatures below 700 $^\circ{}$C, these nanowires exhibit an inversely tapered morphology, whereas higher temperatures favor the nucleation of additional branches due to a phase separation of Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N into wurtzite AlN and rock-salt ScN. Phase-pure Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N nanowires are integrated into vertical nanogenerators, where the metallic TiN substrate serves as bottom electrode. The fabricated polymer-nanowire composite devices achieve effective piezoelectric charge coefficients of up to 8.5 pC N$^{-1}$ at x=0.32, thus exceeding the piezoelectric response of bulk AlN by nearly a factor of two. Although the charge response remains lower compared to Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N thin films, the reduced effective dielectric permittivity of the nanowire-polymer composites compensates the reduction in piezoelectric charge coefficient, eventually yielding a higher voltage response and comparable energy harvesting efficiency. Finally, effective medium modeling reveals that the device architecture is the primary factor limiting performance, providing general design principles for highly efficient nanowire-based piezoelectric energy harvesters. - Open Access
- 29 July 2025
- Published by Elsevier in Acta Materialia
- Vol. 297
Dislocation correlations in GaN epitaxial films revealed by EBSD and XRD
- 29 July 2025
- Published by Elsevier in Acta Materialia
- Vol. 297
Open AccessDislocation correlations in GaN epitaxial films revealed by EBSD and XRD
- Open Access
- 19 February 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (14) , 14LT01
Growth of compositionally uniform InxGa1−xN layers with low relaxation degree on GaN by molecular beam epitaxy
500 nm-thick In x Ga 1 − x N layers with x = 0.06–0.14 are grown using plasma-assisted molecular beam epitaxy, and their properties are assessed by a comprehensive analysis involving x-ray diffraction, secondary ion mass spectrometry, and cathodoluminescence as well as photoluminescence spectroscopy. We demonstrate low degrees of strain relaxation (10% for x = 0.12), low threading dislocation densities ( 1 × 10 9 cm − 2 for x = 0.12), uniform composition both in the growth and lateral direction, and a narrow emission band. The unique sum of excellent materials properties make these layers an attractive basis for the top–down fabrication of ternary nanowires.
- 19 February 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (14) , 14LT01
Open AccessGrowth of compositionally uniform InxGa1−xN layers with low relaxation degree on GaN by molecular beam epitaxy
500 nm-thick In x Ga 1 − x N layers with x = 0.06–0.14 are grown using plasma-assisted molecular beam epitaxy, and their properties are assessed by a comprehensive analysis involving x-ray diffraction, secondary ion mass spectrometry, and cathodoluminescence as well as photoluminescence spectroscopy. We demonstrate low degrees of strain relaxation (10% for x = 0.12), low threading dislocation densities ( 1 × 10 9 cm − 2 for x = 0.12), uniform composition both in the growth and lateral direction, and a narrow emission band. The unique sum of excellent materials properties make these layers an attractive basis for the top–down fabrication of ternary nanowires.
- 27 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (13) , 15798-15807
AlN Nanowire-Based Vertically Integrated Piezoelectric Nanogenerators
- 27 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (13) , 15798-15807
AlN Nanowire-Based Vertically Integrated Piezoelectric Nanogenerators
- Open Access
- 17 May 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (21) , 6233-6239
ScN/GaN(11̅00): A New Platform for the Epitaxy of Twin-Free Metal–Semiconductor Heterostructures
We study the molecular beam epitaxy of rock-salt ScN on the wurtzite GaN(11̅00) surface. To this end, ScN is grown on freestanding GaN(11̅00) substrates and self-assembled GaN nanowires exhibiting (11̅00) sidewalls. On both substrates, ScN crystallizes twin-free thanks to a specific epitaxial relationship, namely ScN(110)[001]∥GaN(11̅00)[0001], providing a congruent, low-symmetry interface. The 13.1% uniaxial lattice mismatch occurring in this orientation mostly relaxes within the first few monolayers of growth by forming a near-coincidence site lattice, where 7 GaN planes coincide with 8 ScN planes, leaving the ScN surface nearly free of extended defects. Overgrowth of the ScN with GaN leads to a kinetic stabilization of the zinc blende phase, that rapidly develops wurtzite inclusions nucleating on {111} nanofacets, commonly observed during zinc blende GaN growth. Our ScN/GaN(11̅00) platform opens a new route for the epitaxy of twin-free metal-semiconductor heterostructures including closely lattice-matched GaN, ScN, HfN, and ZrN compounds.
- 17 May 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (21) , 6233-6239
Open AccessScN/GaN(11̅00): A New Platform for the Epitaxy of Twin-Free Metal–Semiconductor Heterostructures
We study the molecular beam epitaxy of rock-salt ScN on the wurtzite GaN(11̅00) surface. To this end, ScN is grown on freestanding GaN(11̅00) substrates and self-assembled GaN nanowires exhibiting (11̅00) sidewalls. On both substrates, ScN crystallizes twin-free thanks to a specific epitaxial relationship, namely ScN(110)[001]∥GaN(11̅00)[0001], providing a congruent, low-symmetry interface. The 13.1% uniaxial lattice mismatch occurring in this orientation mostly relaxes within the first few monolayers of growth by forming a near-coincidence site lattice, where 7 GaN planes coincide with 8 ScN planes, leaving the ScN surface nearly free of extended defects. Overgrowth of the ScN with GaN leads to a kinetic stabilization of the zinc blende phase, that rapidly develops wurtzite inclusions nucleating on {111} nanofacets, commonly observed during zinc blende GaN growth. Our ScN/GaN(11̅00) platform opens a new route for the epitaxy of twin-free metal-semiconductor heterostructures including closely lattice-matched GaN, ScN, HfN, and ZrN compounds.
- Open Access
- 25 March 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (26) , 265702
Composition and optical properties of (In, Ga)As nanowires grown by group-III-assisted molecular beam epitaxy
(In, Ga) alloy droplets are used to catalyse the growth of (In, Ga)As nanowires by molecular beam epitaxy on Si(111) substrates. The composition, morphology and optical properties of these nanowires can be tuned by the employed elemental fluxes. To incorporate more than 10% of In, a high In/(In+Ga) flux ratio above 0.7 is required. We report a maximum In content of almost 30% in bulk (In, Ga)As nanowires for an In/(In+Ga) flux ratio of 0.8. However, with increasing In/(In+Ga) flux ratio, the nanowire length and diameter are notably reduced. Using photoluminescence and cathodoluminescence spectroscopy on nanowires covered by a passivating (In, Al)As shell, two luminescence bands are observed. A significant segment of the nanowires shows homogeneous emission, with a wavelength corresponding to the In content in this segment, while the consumption of the catalyst droplet leads to a spectrally-shifted emission band at the top of the nanowires. The (In,Ga)As nanowires studied in this work provide a new approach for the integration of infrared emitters on Si platforms.
- 25 March 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (26) , 265702
Open AccessComposition and optical properties of (In, Ga)As nanowires grown by group-III-assisted molecular beam epitaxy
(In, Ga) alloy droplets are used to catalyse the growth of (In, Ga)As nanowires by molecular beam epitaxy on Si(111) substrates. The composition, morphology and optical properties of these nanowires can be tuned by the employed elemental fluxes. To incorporate more than 10% of In, a high In/(In+Ga) flux ratio above 0.7 is required. We report a maximum In content of almost 30% in bulk (In, Ga)As nanowires for an In/(In+Ga) flux ratio of 0.8. However, with increasing In/(In+Ga) flux ratio, the nanowire length and diameter are notably reduced. Using photoluminescence and cathodoluminescence spectroscopy on nanowires covered by a passivating (In, Al)As shell, two luminescence bands are observed. A significant segment of the nanowires shows homogeneous emission, with a wavelength corresponding to the In content in this segment, while the consumption of the catalyst droplet leads to a spectrally-shifted emission band at the top of the nanowires. The (In,Ga)As nanowires studied in this work provide a new approach for the integration of infrared emitters on Si platforms.
- Open Access
Growth kinetics and substrate stability during high-temperature molecular beam epitaxy of AlN nanowires
We study the molecular beam epitaxy of AlN nanowires between 950 and 1215 °C, well above the usual growth temperatures, to identify optimal growth conditions. The nanowires are grown by self-assembly on TiN(111) films sputtered onto Al$_2$O$_3$. Above 1100 °C, the TiN film is seen to undergo grain growth and its surface exhibits {111} facets where AlN nucleation preferentially occurs. Modelling of the nanowire elongation rate measured at different temperatures shows that the Al adatom diffusion length is maximised at 1150 °C, which appears to be the optimum growth temperature. However, analysis of the nanowire luminescence shows a steep increase in the deep-level signal already above 1050 °C, associated with O incorporation from the Al$_2$O$_3$ substrate. Comparison with AlN nanowires grown on Si, MgO and SiC substrates suggests that heavy doping of Si and O by interdiffusion from the TiN/substrate interface increases the nanowire internal quantum efficiency, presumably due to the formation of a SiN$_x$ or AlO$_x$ passivation shell. The outdiffusion of Si and O would also cause the formation of the inversion domains observed in the nanowires. It follows that for optoelectronic and piezoelectric applications, optimal AlN nanowire ensembles should be prepared at 1150 °C on TiN/SiC substrates and will require an ex situ surface passivation.
Open AccessGrowth kinetics and substrate stability during high-temperature molecular beam epitaxy of AlN nanowires
We study the molecular beam epitaxy of AlN nanowires between 950 and 1215 °C, well above the usual growth temperatures, to identify optimal growth conditions. The nanowires are grown by self-assembly on TiN(111) films sputtered onto Al$_2$O$_3$. Above 1100 °C, the TiN film is seen to undergo grain growth and its surface exhibits {111} facets where AlN nucleation preferentially occurs. Modelling of the nanowire elongation rate measured at different temperatures shows that the Al adatom diffusion length is maximised at 1150 °C, which appears to be the optimum growth temperature. However, analysis of the nanowire luminescence shows a steep increase in the deep-level signal already above 1050 °C, associated with O incorporation from the Al$_2$O$_3$ substrate. Comparison with AlN nanowires grown on Si, MgO and SiC substrates suggests that heavy doping of Si and O by interdiffusion from the TiN/substrate interface increases the nanowire internal quantum efficiency, presumably due to the formation of a SiN$_x$ or AlO$_x$ passivation shell. The outdiffusion of Si and O would also cause the formation of the inversion domains observed in the nanowires. It follows that for optoelectronic and piezoelectric applications, optimal AlN nanowire ensembles should be prepared at 1150 °C on TiN/SiC substrates and will require an ex situ surface passivation.
- Open Access
ScN/GaN($1\bar{1}00$): a new platform for the epitaxy of twin-free metal-semiconductor heterostructures
We study the molecular beam epitaxy of rock-salt ScN on the wurtzite GaN($1\bar{1}00$) surface. To this end, ScN is grown on free-standing GaN($1\bar{1}00$) substrates and self-assembled GaN nanowires that exhibit ($1\bar{1}00$) sidewalls. On both substrates, ScN crystallizes twin-free thanks to a specific epitaxial relationship, namely ScN(110)[001]$||$GaN($1\bar{1}00$)[0001], providing a congruent, low-symmetry GaN/ScN interface. The 13.1 % uniaxial lattice mismatch occurring in this orientation mostly relaxes within the first few monolayers of growth by forming a coincidence site lattice, where 7 GaN planes coincide with 8 ScN planes, leaving the ScN surface nearly free of extended defects. Overgrowth of the ScN with GaN leads to a kinetic stabilization of the zinc blende phase, that rapidly develops wurtzite inclusions nucleating on {111} nanofacets, commonly observed during zinc blende GaN growth. Our ScN/GaN($1\bar{1}00$) platform opens a new route for the epitaxy of twin-free metal-semiconductor heterostructures made of closely lattice-matched GaN, ScN, HfN and ZrN compounds.
Open AccessScN/GaN($1\bar{1}00$): a new platform for the epitaxy of twin-free metal-semiconductor heterostructures
We study the molecular beam epitaxy of rock-salt ScN on the wurtzite GaN($1\bar{1}00$) surface. To this end, ScN is grown on free-standing GaN($1\bar{1}00$) substrates and self-assembled GaN nanowires that exhibit ($1\bar{1}00$) sidewalls. On both substrates, ScN crystallizes twin-free thanks to a specific epitaxial relationship, namely ScN(110)[001]$||$GaN($1\bar{1}00$)[0001], providing a congruent, low-symmetry GaN/ScN interface. The 13.1 % uniaxial lattice mismatch occurring in this orientation mostly relaxes within the first few monolayers of growth by forming a coincidence site lattice, where 7 GaN planes coincide with 8 ScN planes, leaving the ScN surface nearly free of extended defects. Overgrowth of the ScN with GaN leads to a kinetic stabilization of the zinc blende phase, that rapidly develops wurtzite inclusions nucleating on {111} nanofacets, commonly observed during zinc blende GaN growth. Our ScN/GaN($1\bar{1}00$) platform opens a new route for the epitaxy of twin-free metal-semiconductor heterostructures made of closely lattice-matched GaN, ScN, HfN and ZrN compounds.
- Open Access
- 1 September 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (46) , 465605
Growth kinetics and substrate stability during high-temperature molecular beam epitaxy of AlN nanowires
We study the molecular beam epitaxy of AlN nanowires between 950 °C and 1215 °C, well above the usual growth temperatures, to identify optimal growth conditions. The nanowires are grown by self-assembly on TiN(111) films sputtered onto Al2O3. Above 1100 °C, the TiN film is seen to undergo grain growth and its surface exhibits {111} facets where AlN nucleation preferentially occurs. Modeling of the nanowire elongation rate measured at different temperatures shows that the Al adatom diffusion length maximizes at 1150 °C, which appears to be the optimum growth temperature. However, analysis of the nanowire luminescence shows a steep increase in the deep-level signal already above 1050 °C, associated with O incorporation from the Al2O3 substrate. Comparison with AlN nanowires grown on Si, MgO and SiC substrates suggests that heavy doping of Si and O by interdiffusion from the TiN/substrate interface increases the nanowire internal quantum efficiency, presumably due to the formation of a SiN x or AlO x passivation shell. The outdiffusion of Si and O would also cause the formation of the inversion domains observed in the nanowires. It follows that for optoelectronic and piezoelectric applications, optimal AlN nanowire ensembles should be prepared at 1150 °C on TiN/SiC substrates and will require an ex situ surface passivation.
- 1 September 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (46) , 465605
Open AccessGrowth kinetics and substrate stability during high-temperature molecular beam epitaxy of AlN nanowires
We study the molecular beam epitaxy of AlN nanowires between 950 °C and 1215 °C, well above the usual growth temperatures, to identify optimal growth conditions. The nanowires are grown by self-assembly on TiN(111) films sputtered onto Al2O3. Above 1100 °C, the TiN film is seen to undergo grain growth and its surface exhibits {111} facets where AlN nucleation preferentially occurs. Modeling of the nanowire elongation rate measured at different temperatures shows that the Al adatom diffusion length maximizes at 1150 °C, which appears to be the optimum growth temperature. However, analysis of the nanowire luminescence shows a steep increase in the deep-level signal already above 1050 °C, associated with O incorporation from the Al2O3 substrate. Comparison with AlN nanowires grown on Si, MgO and SiC substrates suggests that heavy doping of Si and O by interdiffusion from the TiN/substrate interface increases the nanowire internal quantum efficiency, presumably due to the formation of a SiN x or AlO x passivation shell. The outdiffusion of Si and O would also cause the formation of the inversion domains observed in the nanowires. It follows that for optoelectronic and piezoelectric applications, optimal AlN nanowire ensembles should be prepared at 1150 °C on TiN/SiC substrates and will require an ex situ surface passivation.