Allegra T. Aron
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Allegra T. Aron has a total of 406 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Petras
Department of Biochemistry, University of California Riverside, Riverside, CA, USA
11 shared publications - Pieter C. Dorrestein
Skaggs School of Pharmacy and Pharmaceutical Sciences, University of California San Diego, La Jolla, CA, USA
10 shared publications - Mingxun Wang
University of California Riverside
8 shared publications - Robin Schmid
Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences, Prague, Czechia
5 shared publications Anastasiia Kostenko
Department of Chemistry and Biochemistry, University of Denver, Denver, USA
3 shared publications- Andrés Mauricio Caraballo-Rodríguez
Skaggs School of Pharmacy and Pharmaceutical Sciences, University of California San Diego, La Jolla, CA, USA
3 shared publications
Latest Publications
- Open Access
The Everything Bagel Feature Finder: Ultra-fast automated feature finding for untargeted metabolomics
Metabolomics studies are increasingly being applied with hundreds to thousands, even tens of thousands of samples that demand rapid, automated data processing while maintaining analytical sensitivity or quantitative accuracy. A major computational bottleneck is feature finding, which is the transformation of LC-MS and LC-MS/MS data into a set of analyte signals aligned and quantified across samples. Feature finding can be computationally intensive and often requires manual iterative parameter optimization. To accelerate this process, we present the Everything Bagel (EB) feature finder, an ultra-fast automated feature finding tool that integrates feature detection, retention-time alignment, and gap filling designed for run-time and memory efficiency. We benchmarked EB against two automated feature finding methods on eight benchmarking datasets. Specifically, we evaluated these three feature finding methods by measuring spike-in standard detection coverage, dilution series quantification accuracy, and yeast 12 C/ 13 C credentialed features. In this evaluation, the EB feature finder achieved performance comparable to, and often exceeding, existing methods while requiring up to 150-fold lower CPU hours and up to 113-fold lower wall time. We further demonstrated the bioanalytical validity of EB by reanalyzing published datasets used for biomarker discovery and reproduced biologically significant features that matched the published findings using manually tuned feature finding settings. Taken along with the speed improvements, we anticipate EB will enhance the ability to automatically analyze datasets with thousands to tens of thousands of samples for the community.
Open AccessThe Everything Bagel Feature Finder: Ultra-fast automated feature finding for untargeted metabolomics
Metabolomics studies are increasingly being applied with hundreds to thousands, even tens of thousands of samples that demand rapid, automated data processing while maintaining analytical sensitivity or quantitative accuracy. A major computational bottleneck is feature finding, which is the transformation of LC-MS and LC-MS/MS data into a set of analyte signals aligned and quantified across samples. Feature finding can be computationally intensive and often requires manual iterative parameter optimization. To accelerate this process, we present the Everything Bagel (EB) feature finder, an ultra-fast automated feature finding tool that integrates feature detection, retention-time alignment, and gap filling designed for run-time and memory efficiency. We benchmarked EB against two automated feature finding methods on eight benchmarking datasets. Specifically, we evaluated these three feature finding methods by measuring spike-in standard detection coverage, dilution series quantification accuracy, and yeast 12 C/ 13 C credentialed features. In this evaluation, the EB feature finder achieved performance comparable to, and often exceeding, existing methods while requiring up to 150-fold lower CPU hours and up to 113-fold lower wall time. We further demonstrated the bioanalytical validity of EB by reanalyzing published datasets used for biomarker discovery and reproduced biologically significant features that matched the published findings using manually tuned feature finding settings. Taken along with the speed improvements, we anticipate EB will enhance the ability to automatically analyze datasets with thousands to tens of thousands of samples for the community.
- Open Access
- 5 August 2026
- Published by American Chemical Society (ACS) in ACS Environmental Au
- Vol. 6 (5) , 946-963
Environmental Contaminants in Surface Snow Samples Made from Reclaimed Water at a Ski Resort: A Mass Spectrometry Analysis
Artificial snowmaking is used by winter recreation resorts to elongate the ski season in areas that lack sufficient snow, yet the occurrence of contaminants in artificial snow remains largely uncharacterized. Contaminants in artificial snow can lead to the introduction of pollutants into surrounding ecosystems (e.g., plants, water streams, soils) or create pathways for human exposure. Using the Arizona Snowbowl Ski Resort in Flagstaff, Arizona, as a case study, we characterized the chemical (organic and inorganic) profile of snow made from reclaimed water samples as compared to natural snow samples. Pharmaceuticals and anthropogenic compounds were identified in snowmaking from reclaimed water samples using nontargeted mass spectrometry paired with molecular networking, and identities of selected compounds were confirmed and quantified using targeted mass spectrometry alongside authentic chemical standards. Nineteen pharmaceuticals were found to be increased in high artificial snowmaking samples as compared to natural snow, including carbamazepine, fexofenadine, flecainide, and lamotrigine, which were present at low ng/L concentrations in one set of high artificial snowmaking samples. A suite of inorganic contaminants was also assessed and quantified using inductively coupled plasma mass spectrometry to reveal that nine metals─sodium, phosphorus, potassium, chromium, manganese, iron, zinc, arsenic, and barium─were increased in abundance in high artificial snowmaking samples compared to levels in normal snow. Taken together, this study suggests that snow made from reclaimed water may contain anthropogenic organic and inorganic analytes, warranting further study on their environmental and human health effects.
- 5 August 2026
- Published by American Chemical Society (ACS) in ACS Environmental Au
- Vol. 6 (5) , 946-963
Open AccessEnvironmental Contaminants in Surface Snow Samples Made from Reclaimed Water at a Ski Resort: A Mass Spectrometry Analysis
Artificial snowmaking is used by winter recreation resorts to elongate the ski season in areas that lack sufficient snow, yet the occurrence of contaminants in artificial snow remains largely uncharacterized. Contaminants in artificial snow can lead to the introduction of pollutants into surrounding ecosystems (e.g., plants, water streams, soils) or create pathways for human exposure. Using the Arizona Snowbowl Ski Resort in Flagstaff, Arizona, as a case study, we characterized the chemical (organic and inorganic) profile of snow made from reclaimed water samples as compared to natural snow samples. Pharmaceuticals and anthropogenic compounds were identified in snowmaking from reclaimed water samples using nontargeted mass spectrometry paired with molecular networking, and identities of selected compounds were confirmed and quantified using targeted mass spectrometry alongside authentic chemical standards. Nineteen pharmaceuticals were found to be increased in high artificial snowmaking samples as compared to natural snow, including carbamazepine, fexofenadine, flecainide, and lamotrigine, which were present at low ng/L concentrations in one set of high artificial snowmaking samples. A suite of inorganic contaminants was also assessed and quantified using inductively coupled plasma mass spectrometry to reveal that nine metals─sodium, phosphorus, potassium, chromium, manganese, iron, zinc, arsenic, and barium─were increased in abundance in high artificial snowmaking samples compared to levels in normal snow. Taken together, this study suggests that snow made from reclaimed water may contain anthropogenic organic and inorganic analytes, warranting further study on their environmental and human health effects.
- Open Access
- 28 July 2026
- Published by Elsevier in SSRN Electronic Journal
Cellular Quiescence Involves Trigger-Specific Remodeling of Metal Homeostasis
Cells continuously evaluate their nutrient status to make proliferation-quiescence decisions. Zinc is one such essential nutrient and zinc deprivation drives cells into quiescence. How other metal micronutrients are altered in quiescence has not been established. Here, we examined three quiescence triggers (zinc deficiency, serum starvation, and growth factor withdrawal) in MCF10A cells by modifying growth media, the primary source of metals. Fluorescence microscopy and elemental analysis reveal trigger-dependent changes in the labile and total transition metal pools of quiescent cells. RNA sequencing and differential expression analysis of metal associated, regulatory, and homeostasis genes shows that while core quiescence pathways are shared across triggers, quiescence states remain molecularly distinct. A significant percent of 2458 metal homeostasis genes are differentially expressed, including genes involved in antioxidant activity, oxidative phosphorylation, and heme metabolism. Overall, this work demonstrates that metal homeostasis is systematically rewired during cellular quiescence, with different signatures for different quiescence triggers.
- 28 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCellular Quiescence Involves Trigger-Specific Remodeling of Metal Homeostasis
Cells continuously evaluate their nutrient status to make proliferation-quiescence decisions. Zinc is one such essential nutrient and zinc deprivation drives cells into quiescence. How other metal micronutrients are altered in quiescence has not been established. Here, we examined three quiescence triggers (zinc deficiency, serum starvation, and growth factor withdrawal) in MCF10A cells by modifying growth media, the primary source of metals. Fluorescence microscopy and elemental analysis reveal trigger-dependent changes in the labile and total transition metal pools of quiescent cells. RNA sequencing and differential expression analysis of metal associated, regulatory, and homeostasis genes shows that while core quiescence pathways are shared across triggers, quiescence states remain molecularly distinct. A significant percent of 2458 metal homeostasis genes are differentially expressed, including genes involved in antioxidant activity, oxidative phosphorylation, and heme metabolism. Overall, this work demonstrates that metal homeostasis is systematically rewired during cellular quiescence, with different signatures for different quiescence triggers.
- Open Access
- 14 January 2026
- Published by Oxford University Press (OUP) in ISME Communications
- Vol. 6 (1)
Computational mass spectrometry and genome mining guided discovery of metallophores produced by Microbulbifer
Iron is an essential component of cellular biology. Thus, iron’s low bioavailability is a key evolutionary pressure guiding microbial dynamics in the marine environment. Among marine bacteria, Microbulbifer is a chemically underexplored and functionally versatile bacterial genus, which is commonly associated with sponges, algae, corals, and sediments. Previously, genome analyses have revealed that Microbulbifer spp. can degrade polymers and synthesize natural products. Despite their recognized potential to produce secondary metabolites, siderophores are yet to be identified in Microbulbifer, and their iron acquisition strategies remain largely unknown. Here, we developed a comprehensive mass spectrometry-based query language code to determine siderophore production by Microbulbifer spp. in mono- and mixed cultures. Using this workflow, we discovered a new metallophore, which we named bulbichelin, as well as a suite of previously unreported petrobactins containing an unprecedented longer chain length acylation on the central spermidine moiety. We applied genome mining methods to describe the biosynthesis of these compounds. Using metal infusion mass spectrometry, we show that bulbichelins bind a variety of metals. Notably, neither of these compounds were produced in a co-culture of Microbulbifer with coral-derived pathogen Vibrio coralliilyticus Cn52-H1. Understanding how siderophores shape interspecies interactions between Microbulbifer spp. and other marine organisms will aid in unraveling the chemical and catalytic versatility of this genus and adaptation in nutrient deplete marine environment.
- 14 January 2026
- Published by Oxford University Press (OUP) in ISME Communications
- Vol. 6 (1)
Open AccessComputational mass spectrometry and genome mining guided discovery of metallophores produced by Microbulbifer
Iron is an essential component of cellular biology. Thus, iron’s low bioavailability is a key evolutionary pressure guiding microbial dynamics in the marine environment. Among marine bacteria, Microbulbifer is a chemically underexplored and functionally versatile bacterial genus, which is commonly associated with sponges, algae, corals, and sediments. Previously, genome analyses have revealed that Microbulbifer spp. can degrade polymers and synthesize natural products. Despite their recognized potential to produce secondary metabolites, siderophores are yet to be identified in Microbulbifer, and their iron acquisition strategies remain largely unknown. Here, we developed a comprehensive mass spectrometry-based query language code to determine siderophore production by Microbulbifer spp. in mono- and mixed cultures. Using this workflow, we discovered a new metallophore, which we named bulbichelin, as well as a suite of previously unreported petrobactins containing an unprecedented longer chain length acylation on the central spermidine moiety. We applied genome mining methods to describe the biosynthesis of these compounds. Using metal infusion mass spectrometry, we show that bulbichelins bind a variety of metals. Notably, neither of these compounds were produced in a co-culture of Microbulbifer with coral-derived pathogen Vibrio coralliilyticus Cn52-H1. Understanding how siderophores shape interspecies interactions between Microbulbifer spp. and other marine organisms will aid in unraveling the chemical and catalytic versatility of this genus and adaptation in nutrient deplete marine environment.
- Open Access
- 16 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
PREPRINT "Comparability of Liquid Chromatography Tandem Mass Spectrometry Analysis of Dissolved Organic Matter Across Laboratories"
Non-targeted liquid-chromatography tandem high-resolution mass-spectrometry (LC-MS/MS) is increasingly applied for the structure-resolved chemical analysis of dissolved organic matter (DOM). With new developments in mass spectrometry instrumentation and analysis software, the approach has gained substantial momentum over the last decade. However, achieving high-quality analytical data that is reproducible and comparable across laboratories can be a bottleneck in non-targeted metabolomics and organic matter chemical analysis, especially for data reuse in repository-scale analyses. Understanding the capabilities as well as challenges of comparing LC-MS/MS data from different laboratories is necessary for inferring global trends from public datasets. To illuminate instrumentation factors that drive differences and variability, we used a standardized data analysis pipeline, including classical (CMN) and feature-based molecular networking (FBMN) to analyze data from a ring-trial by 24 laboratories on identical sample sets of algal and DOM extracts that were mixed in predefined concentrations and spiked with standards. Our results showed that data sets from similar mass spectrometer types with unified instrument parameters were qualitatively comparable, resolving the same general trends and shared mass spectral features. Inter-laboratory comparability was best for high intensity features, while low intensity features showed greater detection variability. Our analysis also highlights challenges when comparing data from instruments with different acquisition rates or operated with less standardized methods. Lastly, we provide recommendations for data integration, public data sharing, standardization, and best practices for standardized LC-MS/MS data acquisition, which will be critical for long-term time series and inter-comparability of DOM chemical analyses.
- 16 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPREPRINT "Comparability of Liquid Chromatography Tandem Mass Spectrometry Analysis of Dissolved Organic Matter Across Laboratories"
Non-targeted liquid-chromatography tandem high-resolution mass-spectrometry (LC-MS/MS) is increasingly applied for the structure-resolved chemical analysis of dissolved organic matter (DOM). With new developments in mass spectrometry instrumentation and analysis software, the approach has gained substantial momentum over the last decade. However, achieving high-quality analytical data that is reproducible and comparable across laboratories can be a bottleneck in non-targeted metabolomics and organic matter chemical analysis, especially for data reuse in repository-scale analyses. Understanding the capabilities as well as challenges of comparing LC-MS/MS data from different laboratories is necessary for inferring global trends from public datasets. To illuminate instrumentation factors that drive differences and variability, we used a standardized data analysis pipeline, including classical (CMN) and feature-based molecular networking (FBMN) to analyze data from a ring-trial by 24 laboratories on identical sample sets of algal and DOM extracts that were mixed in predefined concentrations and spiked with standards. Our results showed that data sets from similar mass spectrometer types with unified instrument parameters were qualitatively comparable, resolving the same general trends and shared mass spectral features. Inter-laboratory comparability was best for high intensity features, while low intensity features showed greater detection variability. Our analysis also highlights challenges when comparing data from instruments with different acquisition rates or operated with less standardized methods. Lastly, we provide recommendations for data integration, public data sharing, standardization, and best practices for standardized LC-MS/MS data acquisition, which will be critical for long-term time series and inter-comparability of DOM chemical analyses.
- Top Cited Papers
- 20 September 2024
- Published by Springer Nature in Nature Protocols
- Vol. 20 (1) , 92-162
Statistical analysis of feature-based molecular networking results from non-targeted metabolomics data
Feature-based molecular networking (FBMN) is a popular analysis approach for liquid chromatography–tandem mass spectrometry-based non-targeted metabolomics data. While processing liquid chromatography–tandem mass spectrometry data through FBMN is fairly streamlined, downstream data handling and statistical interrogation are often a key bottleneck. Especially users new to statistical analysis struggle to effectively handle and analyze complex data matrices. Here we provide a comprehensive guide for the statistical analysis of FBMN results, focusing on the downstream analysis of the FBMN output table. We explain the data structure and principles of data cleanup and normalization, as well as uni- and multivariate statistical analysis of FBMN results. We provide explanations and code in two scripting languages (R and Python) as well as the QIIME2 framework for all protocol steps, from data clean-up to statistical analysis. All code is shared in the form of Jupyter Notebooks (https://github.com/Functional-Metabolomics-Lab/FBMN-STATS). Additionally, the protocol is accompanied by a web application with a graphical user interface (https://fbmn-statsguide.gnps2.org/) to lower the barrier of entry for new users and for educational purposes. Finally, we also show users how to integrate their statistical results into the molecular network using the Cytoscape visualization tool. Throughout the protocol, we use a previously published environmental metabolomics dataset for demonstration purposes. Together, the protocol, code and web application provide a complete guide and toolbox for FBMN data integration, cleanup and advanced statistical analysis, enabling new users to uncover molecular insights from their non-targeted metabolomics data. Our protocol is tailored for the seamless analysis of FBMN results from Global Natural Products Social Molecular Networking and can be easily adapted to other mass spectrometry feature detection, annotation and networking tools.
- 20 September 2024
- Published by Springer Nature in Nature Protocols
- Vol. 20 (1) , 92-162
Top Cited PapersStatistical analysis of feature-based molecular networking results from non-targeted metabolomics data
Feature-based molecular networking (FBMN) is a popular analysis approach for liquid chromatography–tandem mass spectrometry-based non-targeted metabolomics data. While processing liquid chromatography–tandem mass spectrometry data through FBMN is fairly streamlined, downstream data handling and statistical interrogation are often a key bottleneck. Especially users new to statistical analysis struggle to effectively handle and analyze complex data matrices. Here we provide a comprehensive guide for the statistical analysis of FBMN results, focusing on the downstream analysis of the FBMN output table. We explain the data structure and principles of data cleanup and normalization, as well as uni- and multivariate statistical analysis of FBMN results. We provide explanations and code in two scripting languages (R and Python) as well as the QIIME2 framework for all protocol steps, from data clean-up to statistical analysis. All code is shared in the form of Jupyter Notebooks (https://github.com/Functional-Metabolomics-Lab/FBMN-STATS). Additionally, the protocol is accompanied by a web application with a graphical user interface (https://fbmn-statsguide.gnps2.org/) to lower the barrier of entry for new users and for educational purposes. Finally, we also show users how to integrate their statistical results into the molecular network using the Cytoscape visualization tool. Throughout the protocol, we use a previously published environmental metabolomics dataset for demonstration purposes. Together, the protocol, code and web application provide a complete guide and toolbox for FBMN data integration, cleanup and advanced statistical analysis, enabling new users to uncover molecular insights from their non-targeted metabolomics data. Our protocol is tailored for the seamless analysis of FBMN results from Global Natural Products Social Molecular Networking and can be easily adapted to other mass spectrometry feature detection, annotation and networking tools.
- Open Access
- 9 September 2024
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 14 (11)
Y and mitochondrial chromosomes in the heterogeneous stock rat population
Genome-wide association studies typically evaluate the autosomes and sometimes the X Chromosome, but seldom consider the Y or mitochondrial Chromosomes. We genotyped the Y and mitochondrial Chromosomes in heterogeneous stock rats (Rattus norvegicus), an outbred population created from eight inbred strains. We identified 8 distinct Y and 4 distinct mitochondrial Chromosomes among the 8 founders. However, only two types of each nonrecombinant chromosome were observed in our modern heterogeneous stock rat population (generations 81-97). Despite the relatively large sample size, there were virtually no significant associations for behavioral, physiological, metabolome, or microbiome traits after correcting for multiple comparisons. However, both Y and mitochondrial Chromosomes were strongly associated with expression of a few genes located on those chromosomes, which provided a positive control. Our results suggest that within modern heterogeneous stock rats there are no Y and mitochondrial Chromosomes differences that strongly influence behavioral or physiological traits. These results do not address other ancestral Y and mitochondrial Chromosomes that do not appear in modern heterogeneous stock rats, nor do they address effects that may exist in other rat populations, or in other species.
- 9 September 2024
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 14 (11)
Open AccessY and mitochondrial chromosomes in the heterogeneous stock rat population
Genome-wide association studies typically evaluate the autosomes and sometimes the X Chromosome, but seldom consider the Y or mitochondrial Chromosomes. We genotyped the Y and mitochondrial Chromosomes in heterogeneous stock rats (Rattus norvegicus), an outbred population created from eight inbred strains. We identified 8 distinct Y and 4 distinct mitochondrial Chromosomes among the 8 founders. However, only two types of each nonrecombinant chromosome were observed in our modern heterogeneous stock rat population (generations 81-97). Despite the relatively large sample size, there were virtually no significant associations for behavioral, physiological, metabolome, or microbiome traits after correcting for multiple comparisons. However, both Y and mitochondrial Chromosomes were strongly associated with expression of a few genes located on those chromosomes, which provided a positive control. Our results suggest that within modern heterogeneous stock rats there are no Y and mitochondrial Chromosomes differences that strongly influence behavioral or physiological traits. These results do not address other ancestral Y and mitochondrial Chromosomes that do not appear in modern heterogeneous stock rats, nor do they address effects that may exist in other rat populations, or in other species.
- 20 July 2024
- Published by Elsevier
- Vol. 702, 317-352
Native metabolomics for mass spectrometry-based siderophore discovery
- 20 July 2024
- Published by Elsevier
- Vol. 702, 317-352
Native metabolomics for mass spectrometry-based siderophore discovery
- 1 July 2024
- Published by Oxford University Press (OUP) in Metallomics
- Vol. 16 (7)
Dietary iron intake has long-term effects on the fecal metabolome and microbiome
Iron is essential for life, but its imbalances can lead to severe health implications. Iron deficiency is the most common nutrient disorder worldwide, and iron dysregulation in early life has been found to cause long-lasting behavioral, cognitive, and neural effects. However, little is known about the effects of dietary iron on gut microbiome function and metabolism. In this study, we sought to investigate the impact of dietary iron on the fecal metabolome and microbiome by using mice fed with three diets with different iron content: an iron deficient, an iron sufficient (standard), and an iron overload diet for 7 weeks. Additionally, we sought to understand whether any observed changes would persist past the 7-week period of diet intervention. To assess this, all feeding groups were switched to a standard diet, and this feeding continued for an additional 7 weeks. Analysis of the fecal metabolome revealed that iron overload and deficiency significantly alter levels of peptides, nucleic acids, and lipids, including di- and tri-peptides containing branched-chain amino acids, inosine and guanosine, and several microbial conjugated bile acids. The observed changes in the fecal metabolome persist long after the switch back to a standard diet, with the cecal gut microbiota composition and function of each group distinct after the 7-week standard diet wash-out. Our results highlight the enduring metabolic consequences of nutritional imbalances, mediated by both the host and gut microbiome, which persist after returning to the original standard diets.
- 1 July 2024
- Published by Oxford University Press (OUP) in Metallomics
- Vol. 16 (7)
Dietary iron intake has long-term effects on the fecal metabolome and microbiome
Iron is essential for life, but its imbalances can lead to severe health implications. Iron deficiency is the most common nutrient disorder worldwide, and iron dysregulation in early life has been found to cause long-lasting behavioral, cognitive, and neural effects. However, little is known about the effects of dietary iron on gut microbiome function and metabolism. In this study, we sought to investigate the impact of dietary iron on the fecal metabolome and microbiome by using mice fed with three diets with different iron content: an iron deficient, an iron sufficient (standard), and an iron overload diet for 7 weeks. Additionally, we sought to understand whether any observed changes would persist past the 7-week period of diet intervention. To assess this, all feeding groups were switched to a standard diet, and this feeding continued for an additional 7 weeks. Analysis of the fecal metabolome revealed that iron overload and deficiency significantly alter levels of peptides, nucleic acids, and lipids, including di- and tri-peptides containing branched-chain amino acids, inosine and guanosine, and several microbial conjugated bile acids. The observed changes in the fecal metabolome persist long after the switch back to a standard diet, with the cecal gut microbiota composition and function of each group distinct after the 7-week standard diet wash-out. Our results highlight the enduring metabolic consequences of nutritional imbalances, mediated by both the host and gut microbiome, which persist after returning to the original standard diets.
- Open Access
- 7 March 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Leptochelins A-C, Cytotoxic Metallophores Produced by Geographically Dispersed Leptothoe Strains of Marine Cyanobacteria
Metals are important co-factors in the metabolic processes of cyanobacteria including photosynthesis, cellular respiration, DNA replication, and the biosynthesis of primary and secondary metabolites. In adaptation to the marine environment, cyanobacteria use metallophores to acquire trace metals when necessary as well as reduce potential toxicity from excessive metal concentrations. Leptochelins A-C were identified as structurally novel metallophores from three geographically dispersed cyanobacteria of the genus Leptothoe. The leptochelins are halogenated linear NRPS-PKS hybrid products with multiple heterocycles that have potential for hexadentate and tetradentate coordination with metal ions. The genomes of the three leptochelin producers were sequenced, and retrobiosynthetic analysis revealed one candidate biosynthetic gene cluster (BGC) consistent with the structure of leptochelin. The putative BGC is highly homologous in all three Leptothoe strains, and all possess genetic signatures associated with metallophores. Post-column infusion of metals using an LC-MS metabolomics workflow performed with leptochelin A and B revealed promiscuous binding of iron, copper, cobalt, and zinc, but with greatest preference for copper. Iron depletion and copper toxicity experiments support the hypothesis that leptochelin metallophores may play a key ecological role in iron acquisition and in copper detoxification. In addition, the leptochelins possess significant cytotoxicity against several cancer cell lines.
- 7 March 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessLeptochelins A-C, Cytotoxic Metallophores Produced by Geographically Dispersed Leptothoe Strains of Marine Cyanobacteria
Metals are important co-factors in the metabolic processes of cyanobacteria including photosynthesis, cellular respiration, DNA replication, and the biosynthesis of primary and secondary metabolites. In adaptation to the marine environment, cyanobacteria use metallophores to acquire trace metals when necessary as well as reduce potential toxicity from excessive metal concentrations. Leptochelins A-C were identified as structurally novel metallophores from three geographically dispersed cyanobacteria of the genus Leptothoe. The leptochelins are halogenated linear NRPS-PKS hybrid products with multiple heterocycles that have potential for hexadentate and tetradentate coordination with metal ions. The genomes of the three leptochelin producers were sequenced, and retrobiosynthetic analysis revealed one candidate biosynthetic gene cluster (BGC) consistent with the structure of leptochelin. The putative BGC is highly homologous in all three Leptothoe strains, and all possess genetic signatures associated with metallophores. Post-column infusion of metals using an LC-MS metabolomics workflow performed with leptochelin A and B revealed promiscuous binding of iron, copper, cobalt, and zinc, but with greatest preference for copper. Iron depletion and copper toxicity experiments support the hypothesis that leptochelin metallophores may play a key ecological role in iron acquisition and in copper detoxification. In addition, the leptochelins possess significant cytotoxicity against several cancer cell lines.