Keenan Burnett
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Keenan Burnett has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Timothy D. Barfoot
Aerospace, University of Toronto, Toronto, ON, Canada
8 shared publications - Angela P. Schoellig
University of Toronto
5 shared publications - David Juny Yoon
Institute for Aerospace Studies, University of Toronto, Toronto, ON, Canada
4 shared publications Jingxing Qian
University of Toronto 4925 Dufferin Street Toronto Ontario Canada
4 shared publicationsAngela P. Schoellig
Technical University of Munich, Munich, Germany
3 shared publicationsShichen Lu
Aerospace, University of Toronto, Toronto, ON, Canada
3 shared publications
Latest Publications
- Open Access
- 3 January 2025
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 43 (2) , 680-700
IMU as an input versus a measurement of the state in inertial-aided state estimation
Treating inertial measurement unit (IMU) measurements as inputs to a motion model and then preintegrating these measurements have almost become a de facto standard in many robotics applications. However, this approach has a few shortcomings. First, it conflates the IMU measurement noise with the underlying process noise. Second, it is unclear how the state will be propagated in the case of IMU measurement dropout. Third, it does not lend itself well to dealing with multiple high-rate sensors such as a lidar and an IMU or multiple asynchronous IMUs. In this paper, we compare treating an IMU as an input to a motion model against treating it as a measurement of the state in a continuous-time state estimation framework. We methodically compare the performance of these two approaches on a 1D simulation and show that they perform identically, assuming that each method’s hyperparameters have been tuned on a training set. We also provide results for our continuous-time lidar-inertial odometry in simulation and on the Newer College Dataset. In simulation, our approach exceeds the performance of an imu-as-input baseline during highly aggressive motion. On the Newer College Dataset, we demonstrate state-of-the art results. These results show that continuous-time techniques and the treatment of the IMU as a measurement of the state are promising areas of further research. Code for our lidar-inertial odometry can be found at: https://github.com/utiasASRL/steam_icp.
- 3 January 2025
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 43 (2) , 680-700
Open AccessIMU as an input versus a measurement of the state in inertial-aided state estimation
Treating inertial measurement unit (IMU) measurements as inputs to a motion model and then preintegrating these measurements have almost become a de facto standard in many robotics applications. However, this approach has a few shortcomings. First, it conflates the IMU measurement noise with the underlying process noise. Second, it is unclear how the state will be propagated in the case of IMU measurement dropout. Third, it does not lend itself well to dealing with multiple high-rate sensors such as a lidar and an IMU or multiple asynchronous IMUs. In this paper, we compare treating an IMU as an input to a motion model against treating it as a measurement of the state in a continuous-time state estimation framework. We methodically compare the performance of these two approaches on a 1D simulation and show that they perform identically, assuming that each method’s hyperparameters have been tuned on a training set. We also provide results for our continuous-time lidar-inertial odometry in simulation and on the Newer College Dataset. In simulation, our approach exceeds the performance of an imu-as-input baseline during highly aggressive motion. On the Newer College Dataset, we demonstrate state-of-the art results. These results show that continuous-time techniques and the treatment of the IMU as a measurement of the state are promising areas of further research. Code for our lidar-inertial odometry can be found at: https://github.com/utiasASRL/steam_icp.
- 25 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 41 (15523098) , 1059-1076
Continuous-Time Radar-Inertial and Lidar-Inertial Odometry Using a Gaussian Process Motion Prior
In this work, we demonstrate continuous-time radar-inertial and lidar-inertial odometry using a Gaussian process motion prior. Using a sparse prior, we demonstrate improved computational complexity during preintegration and interpolation. We use a white-noise-on-acceleration motion prior and treat the gyroscope as a direct measurement of the state while preintegrating accelerometer measurements to form relative velocity factors. Our odometry is implemented using sliding-window batch trajectory estimation. To our knowledge, our work is the first to demonstrate radar-inertial odometry with a spinning mechanical radar using both gyroscope and accelerometer measurements. We improve the performance of our radar odometry by 43% by incorporating an IMU. Our approach is efficient and we demonstrate real-time performance. Code for this paper can be found at: https://github.com/utiasASRL/steam_icp
- 25 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 41 (15523098) , 1059-1076
Continuous-Time Radar-Inertial and Lidar-Inertial Odometry Using a Gaussian Process Motion Prior
In this work, we demonstrate continuous-time radar-inertial and lidar-inertial odometry using a Gaussian process motion prior. Using a sparse prior, we demonstrate improved computational complexity during preintegration and interpolation. We use a white-noise-on-acceleration motion prior and treat the gyroscope as a direct measurement of the state while preintegrating accelerometer measurements to form relative velocity factors. Our odometry is implemented using sliding-window batch trajectory estimation. To our knowledge, our work is the first to demonstrate radar-inertial odometry with a spinning mechanical radar using both gyroscope and accelerometer measurements. We improve the performance of our radar odometry by 43% by incorporating an IMU. Our approach is efficient and we demonstrate real-time performance. Code for this paper can be found at: https://github.com/utiasASRL/steam_icp
- 22 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (1) , 224-231
Are Doppler Velocity Measurements Useful for Spinning Radar Odometry?
Spinning, frequency-modulated continuous-wave (FMCW) radars with $360 ^{\circ }$ coverage have been gaining popularity for autonomous-vehicle navigation. However, unlike ‘fixed’ automotive radar, commercially available spinning radar systems typically do not produce radial velocities due to the lack of repeated measurements in the same direction and the fundamental hardware setup. To make these radial velocities observable, we modified the firmware of a commercial spinning radar to use triangular frequency modulation. In this letter, we develop a novel way to use this modulation to extract radial Doppler velocity measurements from consecutive azimuths of a radar intensity scan, without any data association. We show that these noisy, error-prone measurements contain enough information to provide good ego-velocity estimates, and incorporate these estimates into different modern odometry pipelines. We extensively evaluate the pipelines on over $\text{110 km}$ of driving data in progressively more geometrically challenging autonomous-driving environments. We show that Doppler velocity measurements improve odometry in well-defined geometric conditions and enable it to continue functioning even in severely geometrically degenerate environments, such as long tunnels.
- 22 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (1) , 224-231
Are Doppler Velocity Measurements Useful for Spinning Radar Odometry?
Spinning, frequency-modulated continuous-wave (FMCW) radars with $360 ^{\circ }$ coverage have been gaining popularity for autonomous-vehicle navigation. However, unlike ‘fixed’ automotive radar, commercially available spinning radar systems typically do not produce radial velocities due to the lack of repeated measurements in the same direction and the fundamental hardware setup. To make these radial velocities observable, we modified the firmware of a commercial spinning radar to use triangular frequency modulation. In this letter, we develop a novel way to use this modulation to extract radial Doppler velocity measurements from consecutive azimuths of a radar intensity scan, without any data association. We show that these noisy, error-prone measurements contain enough information to provide good ego-velocity estimates, and incorporate these estimates into different modern odometry pipelines. We extensively evaluate the pipelines on over $\text{110 km}$ of driving data in progressively more geometrically challenging autonomous-driving environments. We show that Doppler velocity measurements improve odometry in well-defined geometric conditions and enable it to continue functioning even in severely geometrically degenerate environments, such as long tunnels.
- Open Access
Boreas: A Multi-Season Autonomous Driving Dataset
The Boreas dataset was collected by driving a repeated route over the course of one year, resulting in stark seasonal variations and adverse weather conditions such as rain and falling snow. In total, the Boreas dataset includes over 350km of driving data featuring a 128-channel Velodyne Alpha Prime lidar, a 360$^\circ$ Navtech CIR304-H scanning radar, a 5MP FLIR Blackfly S camera, and centimetre-accurate post-processed ground truth poses. Our dataset will support live leaderboards for odometry, metric localization, and 3D object detection. The dataset and development kit are available at https://www.boreas.utias.utoronto.ca
Open AccessBoreas: A Multi-Season Autonomous Driving Dataset
The Boreas dataset was collected by driving a repeated route over the course of one year, resulting in stark seasonal variations and adverse weather conditions such as rain and falling snow. In total, the Boreas dataset includes over 350km of driving data featuring a 128-channel Velodyne Alpha Prime lidar, a 360$^\circ$ Navtech CIR304-H scanning radar, a 5MP FLIR Blackfly S camera, and centimetre-accurate post-processed ground truth poses. Our dataset will support live leaderboards for odometry, metric localization, and 3D object detection. The dataset and development kit are available at https://www.boreas.utias.utoronto.ca
- Top Cited PapersOpen Access
- 1 January 2023
- Published by SAGE Publications in The International Journal of Robotics Research
- Vol. 42 (1-2) , 33-42
Boreas: A multi-season autonomous driving dataset
The Boreas dataset was collected by driving a repeated route over the course of 1 year, resulting in stark seasonal variations and adverse weather conditions such as rain and falling snow. In total, the Boreas dataset includes over 350 km of driving data featuring a 128-channel Velodyne Alpha-Prime lidar, a 360° Navtech CIR304-H scanning radar, a 5MP FLIR Blackfly S camera, and centimetre-accurate post-processed ground truth poses. Our dataset will support live leaderboards for odometry, metric localization, and 3D object detection. The dataset and development kit are available at boreas.utias.utoronto.ca.
- 1 January 2023
- Published by SAGE Publications in The International Journal of Robotics Research
- Vol. 42 (1-2) , 33-42
Top Cited PapersOpen AccessBoreas: A multi-season autonomous driving dataset
The Boreas dataset was collected by driving a repeated route over the course of 1 year, resulting in stark seasonal variations and adverse weather conditions such as rain and falling snow. In total, the Boreas dataset includes over 350 km of driving data featuring a 128-channel Velodyne Alpha-Prime lidar, a 360° Navtech CIR304-H scanning radar, a 5MP FLIR Blackfly S camera, and centimetre-accurate post-processed ground truth poses. Our dataset will support live leaderboards for odometry, metric localization, and 3D object detection. The dataset and development kit are available at boreas.utias.utoronto.ca.
- Top Cited Papers
- 1 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (1) , 264-271
Picking up Speed: Continuous-Time Lidar-Only Odometry Using Doppler Velocity Measurements
Frequency-Modulated Continuous-Wave (FMCW) lidar is a recently emerging technology that additionally enables per-return instantaneous relative radial velocity measurements via the Doppler effect. In this letter, we present the first continuous-time lidar-only odometry algorithm using these Doppler velocity measurements from an FMCW lidar to aid odometry in geometrically degenerate environments. We apply an existing continuous-time framework that efficiently estimates the vehicle trajectory using Gaussian process regression to compensate for motion distortion due to the scanning-while-moving nature of any mechanically actuated lidar (FMCW and non-FMCW). We evaluate our proposed algorithm on several real-world datasets, including publicly available ones and datasets we collected. Our algorithm outperforms the only existing method that also uses Doppler velocity measurements, and we study difficult conditions where including this extra information greatly improves performance. We additionally demonstrate state-of-the-art performance of lidar-only odometry with and without using Doppler velocity measurements in nominal conditions.
- 1 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (1) , 264-271
Top Cited PapersPicking up Speed: Continuous-Time Lidar-Only Odometry Using Doppler Velocity Measurements
Frequency-Modulated Continuous-Wave (FMCW) lidar is a recently emerging technology that additionally enables per-return instantaneous relative radial velocity measurements via the Doppler effect. In this letter, we present the first continuous-time lidar-only odometry algorithm using these Doppler velocity measurements from an FMCW lidar to aid odometry in geometrically degenerate environments. We apply an existing continuous-time framework that efficiently estimates the vehicle trajectory using Gaussian process regression to compensate for motion distortion due to the scanning-while-moving nature of any mechanically actuated lidar (FMCW and non-FMCW). We evaluate our proposed algorithm on several real-world datasets, including publicly available ones and datasets we collected. Our algorithm outperforms the only existing method that also uses Doppler velocity measurements, and we study difficult conditions where including this extra information greatly improves performance. We additionally demonstrate state-of-the-art performance of lidar-only odometry with and without using Doppler velocity measurements in nominal conditions.
- Top Cited Papers
- 21 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 7 (4) , 10328-10335
Are We Ready for Radar to Replace Lidar in All-Weather Mapping and Localization?
We present an extensive comparison between three topometric localization systems: radar-only, lidar-only, and a cross-modal radar-to-lidar system across varying seasonal and weather conditions using the Boreas dataset. Contrary to our expectations, our experiments showed that our lidar-only pipeline achieved the best localization accuracy even during a snowstorm. Our results seem to suggest that the sensitivity of lidar localization to moderate precipitation has been exaggerated in prior works. However, our radar-only pipeline was able to achieve competitive accuracy with a much smaller map. Furthermore, radar localization and radar sensors still have room to improve and may yet prove valuable in extreme weather or as a redundant backup system.
- 21 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 7 (4) , 10328-10335
Top Cited PapersAre We Ready for Radar to Replace Lidar in All-Weather Mapping and Localization?
We present an extensive comparison between three topometric localization systems: radar-only, lidar-only, and a cross-modal radar-to-lidar system across varying seasonal and weather conditions using the Boreas dataset. Contrary to our expectations, our experiments showed that our lidar-only pipeline achieved the best localization accuracy even during a snowstorm. Our results seem to suggest that the sensitivity of lidar localization to moderate precipitation has been exaggerated in prior works. However, our radar-only pipeline was able to achieve competitive accuracy with a much smaller map. Furthermore, radar localization and radar sensors still have room to improve and may yet prove valuable in extreme weather or as a redundant backup system.
- Top Cited Papers
- 18 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 771-778
Do We Need to Compensate for Motion Distortion and Doppler Effects in Spinning Radar Navigation?
In order to tackle the challenge of unfavorable weather conditions such as rain and snow, radar is being revisited as a parallel sensing modality to vision and lidar. Recent works have made tremendous progress in applying spinning radar to odometry and place recognition. However, these works have so far ignored the impact of motion distortion and Doppler effects on spinning-radar-based navigation, which may be significant in the self-driving car domain where speeds can be high. In this work, we demonstrate the effect of these distortions on radar odometry using the Oxford Radar RobotCar Dataset and metric localization using our own data-taking platform. We revisit a lightweight estimator that can recover the motion between a pair of radar scans while accounting for both effects. Our conclusion is that both motion distortion and the Doppler effect are significant in different aspects of spinning radar navigation, with the former more prominent than the latter. Code for this project can be found at: https://github.com/keenan-burnett/yeti_radar_odometry.
- 18 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 771-778
Top Cited PapersDo We Need to Compensate for Motion Distortion and Doppler Effects in Spinning Radar Navigation?
In order to tackle the challenge of unfavorable weather conditions such as rain and snow, radar is being revisited as a parallel sensing modality to vision and lidar. Recent works have made tremendous progress in applying spinning radar to odometry and place recognition. However, these works have so far ignored the impact of motion distortion and Doppler effects on spinning-radar-based navigation, which may be significant in the self-driving car domain where speeds can be high. In this work, we demonstrate the effect of these distortions on radar odometry using the Oxford Radar RobotCar Dataset and metric localization using our own data-taking platform. We revisit a lightweight estimator that can recover the motion between a pair of radar scans while accounting for both effects. Our conclusion is that both motion distortion and the Doppler effect are significant in different aspects of spinning radar navigation, with the former more prominent than the latter. Code for this project can be found at: https://github.com/keenan-burnett/yeti_radar_odometry.
- 12 May 2020
- Published by Wiley in Journal of Field Robotics
- Vol. 38 (1) , 139-166
Zeus: A system description of the two‐time winner of the collegiate SAE autodrive competition
The SAE AutoDrive Challenge is a 3‐year collegiate competition to develop a self‐driving car by 2020. The second year of the competition was held in June 2019 at MCity, a mock town built for self‐driving car testing at the University of Michigan. Teams were required to autonomously navigate a series of intersections while handling pedestrians, traffic lights, and traffic signs. Zeus is aUToronto's winning entry in the AutoDrive Challenge. This article describes the system design and development of Zeus as well as many of the lessons learned along the way. This includes details on the team's organizational structure, sensor suite, software components, and performance at the Year 2 competition. With a team of mostly undergraduates and minimal resources, aUToronto has made progress toward a functioning self‐driving vehicle, in just 2 years. This article may prove valuable to researchers looking to develop their own self‐driving platform.
- 12 May 2020
- Published by Wiley in Journal of Field Robotics
- Vol. 38 (1) , 139-166
Zeus: A system description of the two‐time winner of the collegiate SAE autodrive competition
The SAE AutoDrive Challenge is a 3‐year collegiate competition to develop a self‐driving car by 2020. The second year of the competition was held in June 2019 at MCity, a mock town built for self‐driving car testing at the University of Michigan. Teams were required to autonomously navigate a series of intersections while handling pedestrians, traffic lights, and traffic signs. Zeus is aUToronto's winning entry in the AutoDrive Challenge. This article describes the system design and development of Zeus as well as many of the lessons learned along the way. This includes details on the team's organizational structure, sensor suite, software components, and performance at the Year 2 competition. With a team of mostly undergraduates and minimal resources, aUToronto has made progress toward a functioning self‐driving vehicle, in just 2 years. This article may prove valuable to researchers looking to develop their own self‐driving platform.
- Open Access
Zeus: A System Description of the Two-Time Winner of the Collegiate SAE AutoDrive Competition
The SAE AutoDrive Challenge is a three-year collegiate competition to develop a self-driving car by 2020. The second year of the competition was held in June 2019 at MCity, a mock town built for self-driving car testing at the University of Michigan. Teams were required to autonomously navigate a series of intersections while handling pedestrians, traffic lights, and traffic signs. Zeus is aUToronto's winning entry in the AutoDrive Challenge. This article describes the system design and development of Zeus as well as many of the lessons learned along the way. This includes details on the team's organizational structure, sensor suite, software components, and performance at the Year 2 competition. With a team of mostly undergraduates and minimal resources, aUToronto has made progress towards a functioning self-driving vehicle, in just two years. This article may prove valuable to researchers looking to develop their own self-driving platform.
Open AccessZeus: A System Description of the Two-Time Winner of the Collegiate SAE AutoDrive Competition
The SAE AutoDrive Challenge is a three-year collegiate competition to develop a self-driving car by 2020. The second year of the competition was held in June 2019 at MCity, a mock town built for self-driving car testing at the University of Michigan. Teams were required to autonomously navigate a series of intersections while handling pedestrians, traffic lights, and traffic signs. Zeus is aUToronto's winning entry in the AutoDrive Challenge. This article describes the system design and development of Zeus as well as many of the lessons learned along the way. This includes details on the team's organizational structure, sensor suite, software components, and performance at the Year 2 competition. With a team of mostly undergraduates and minimal resources, aUToronto has made progress towards a functioning self-driving vehicle, in just two years. This article may prove valuable to researchers looking to develop their own self-driving platform.