Limei Liu
Research Subjects
Limei Liu has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Bin Dong
Soochow University
11 shared publications - Binghao Wang
School of Electronic Science & Engineering, Southeast University, Nanjing, China
11 shared publications Hui Zhang
Institute of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices and Collaborative Innovation Center (CIC) of Suzhou Nano Science and Technology, Soochow University, Suzhou, Jiangsu, China
9 shared publicationsMei Liu
Institute of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices and Collaborative Innovation Center (CIC) of Suzhou Nano Science and Technology, Soochow University, Suzhou, Jiangsu, China
9 shared publications- Aijuan Gu
Jiangsu Key Laboratory of Advanced Functional Polymer Design and Application, Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science Soochow University Suzhou People's Republic of China
5 shared publications Ya Ge
Institute of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices and Collaborative Innovation Center (CIC) of Suzhou Nano Science and Technology, Soochow University , Suzhou, Jiangsu 215123, People's Republic of China
5 shared publications
Latest Publications
- 24 August 2026
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 11 (9) , 8671-8681
Reusable Modular Wearable Bioelectronics for Low-Carbon Task-Adaptive Health Monitoring
Wearable bioelectronics are increasingly expected to support personalized, multiparametric, and closed-loop health monitoring, yet most systems rely on monolithic integration that limits task adaptability and increases hardware redundancy and environmental burden. Here, we present a reusable modular wearable platform that decouples a common digital back end from interchangeable analog front-end and sensing modules. This architecture enables on-demand reconfiguration across electrophysiological, mechanical, thermal, and electrochemical monitoring tasks without redesigning the complete system. Manufacturing-stage carbon-footprint analysis shows that selective reuse of carbon-intensive back-end electronics reduces emissions compared with monolithic integration, with greater benefits as task complexity increases. The platform captures muscle activity, heart-rate dynamics, electroencephalogram α-band features, body temperature, tactile, and glucose levels and wirelessly links physiological sensing to a stretchable chip-on-array LED display for real-time on-skin visualization and threshold-triggered alerts. This work provides a reusable, task-adaptive, and low-carbon hardware framework for scalable personalized wearable bioelectronics.
- 24 August 2026
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 11 (9) , 8671-8681
Reusable Modular Wearable Bioelectronics for Low-Carbon Task-Adaptive Health Monitoring
Wearable bioelectronics are increasingly expected to support personalized, multiparametric, and closed-loop health monitoring, yet most systems rely on monolithic integration that limits task adaptability and increases hardware redundancy and environmental burden. Here, we present a reusable modular wearable platform that decouples a common digital back end from interchangeable analog front-end and sensing modules. This architecture enables on-demand reconfiguration across electrophysiological, mechanical, thermal, and electrochemical monitoring tasks without redesigning the complete system. Manufacturing-stage carbon-footprint analysis shows that selective reuse of carbon-intensive back-end electronics reduces emissions compared with monolithic integration, with greater benefits as task complexity increases. The platform captures muscle activity, heart-rate dynamics, electroencephalogram α-band features, body temperature, tactile, and glucose levels and wirelessly links physiological sensing to a stretchable chip-on-array LED display for real-time on-skin visualization and threshold-triggered alerts. This work provides a reusable, task-adaptive, and low-carbon hardware framework for scalable personalized wearable bioelectronics.
- 29 June 2026
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 11 (7) , 6423-6434
Bottom-Up Absorptive and Stretchable Plasmonic Tape for Field-Deployable In Vivo Fruit Safety Surveillance
Food safety surveillance for fresh produce requires analytical tools that operate directly on wet, curved plant and fruit surfaces, yet gold-standard methods and flexible surface-enhanced Raman scattering (SERS) substrates are often destructive or unsuitable for in vivo use. Here, we present a bottom-up absorptive ultrathin plasmonic tape—SERS-active functional elastomeric (SAFE) tape—that conforms to wet surfaces and absorbs/transports analytes to plasmonic hotspots for quantitative, multiplex in vivo SERS readouts without substrate inversion. SAFE tape swells within seconds and achieves detection limits of 1 nM for pesticides and 1 μM for plant hormones, while maintaining high signal uniformity, mechanical durability, and long-term stability. Predictive models accurately quantify mixtures across a broad range (1 μM to 1 mM). The tape also detects Penicillium spp. up to two days before visible symptoms and enables real-time monitoring of pesticide and preservative degradation during growth and storage, providing a low-cost, field-deployable platform for food safety monitoring.
- 29 June 2026
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 11 (7) , 6423-6434
Bottom-Up Absorptive and Stretchable Plasmonic Tape for Field-Deployable In Vivo Fruit Safety Surveillance
Food safety surveillance for fresh produce requires analytical tools that operate directly on wet, curved plant and fruit surfaces, yet gold-standard methods and flexible surface-enhanced Raman scattering (SERS) substrates are often destructive or unsuitable for in vivo use. Here, we present a bottom-up absorptive ultrathin plasmonic tape—SERS-active functional elastomeric (SAFE) tape—that conforms to wet surfaces and absorbs/transports analytes to plasmonic hotspots for quantitative, multiplex in vivo SERS readouts without substrate inversion. SAFE tape swells within seconds and achieves detection limits of 1 nM for pesticides and 1 μM for plant hormones, while maintaining high signal uniformity, mechanical durability, and long-term stability. Predictive models accurately quantify mixtures across a broad range (1 μM to 1 mM). The tape also detects Penicillium spp. up to two days before visible symptoms and enables real-time monitoring of pesticide and preservative degradation during growth and storage, providing a low-cost, field-deployable platform for food safety monitoring.
- 15 April 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (4) , 2938-2947
Autonomous and Ultrasensitive Low-Power Metal Oxide Nanofiber Gas Sensor for Source Tracking and Localization
Current toxic gas detection methods in industrial and environmental settings are limited by their reliance on manual monitoring and stationary sensors. Here, we present an autonomous mobile gas sensing system offering real-time monitoring and precise gas source localization without the need for human intervention. Room-temperature gas sensors based on high specific surface area indium gallium zinc oxide nanofibers (IGZO NFs) are developed, which exhibit low power consumption (∼0.5 mW), exceptional sensitivity (∼1290% ppb-1), and a low detection limit of 20 ppb for toxic NO2. When integrated into an autonomous mobile platform and supported by adaptive biologically inspired algorithms, the system exhibits a source localization efficiency of ∼1.5 m min-1, offering a remote, scalable, and efficient solution for detecting and localizing toxic gas leaks.
- 15 April 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (4) , 2938-2947
Autonomous and Ultrasensitive Low-Power Metal Oxide Nanofiber Gas Sensor for Source Tracking and Localization
Current toxic gas detection methods in industrial and environmental settings are limited by their reliance on manual monitoring and stationary sensors. Here, we present an autonomous mobile gas sensing system offering real-time monitoring and precise gas source localization without the need for human intervention. Room-temperature gas sensors based on high specific surface area indium gallium zinc oxide nanofibers (IGZO NFs) are developed, which exhibit low power consumption (∼0.5 mW), exceptional sensitivity (∼1290% ppb-1), and a low detection limit of 20 ppb for toxic NO2. When integrated into an autonomous mobile platform and supported by adaptive biologically inspired algorithms, the system exhibits a source localization efficiency of ∼1.5 m min-1, offering a remote, scalable, and efficient solution for detecting and localizing toxic gas leaks.
- 28 April 2021
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 5 (12) , 4658-4663
Spray-coated barrier coating on copper based on exfoliated vermiculite sheets
Few-layer vermiculite sheets obtained by a two-step mechanical–chemical exfoliation approach for oxidation-resistant coating.
- 28 April 2021
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 5 (12) , 4658-4663
Spray-coated barrier coating on copper based on exfoliated vermiculite sheets
Few-layer vermiculite sheets obtained by a two-step mechanical–chemical exfoliation approach for oxidation-resistant coating.
- 11 August 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (36) , 18515-18537
Percolative polymer composites for dielectric capacitors: a brief history, materials, and multilayer interface design
High dielectric constant (high-k) polymer composites exhibit great potential in the fields of dielectric-based energy storage and field-effect transistors due to the advantages of easy processing, flexibility and low cost of polymers. Unfortunately, high-k ceramic/polymer composites generally require high filler loadings, exhibiting inferior processing and mechanical properties. A very high k can be achieved for semiconductor/polymer composites with extremely low filler concentrations, but they usually exhibit high dielectric loss, inducing energy wastage and operational risk. In the past decade, considerable progress in reducing dielectric loss has been achieved though materials development and structural design and process engineering. This review first outlines the performance metrics and the history of capacitors and high-k polymer composites, followed by describing the latest developments in new material families, including metals, metal oxides, carbon nanomaterials, 2D (semi-)conductors and conducting polymers. In addition, particular focus is placed on the layered design strategy that can significantly increase the k, breakdown field, and energy density while reducing the dielectric loss and percolation threshold. Also, fundamental insights on them are discussed. The last part of this review is concluded with current challenges and future perspectives of these promising high-k materials and layered design strategy.
- 11 August 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (36) , 18515-18537
Percolative polymer composites for dielectric capacitors: a brief history, materials, and multilayer interface design
High dielectric constant (high-k) polymer composites exhibit great potential in the fields of dielectric-based energy storage and field-effect transistors due to the advantages of easy processing, flexibility and low cost of polymers. Unfortunately, high-k ceramic/polymer composites generally require high filler loadings, exhibiting inferior processing and mechanical properties. A very high k can be achieved for semiconductor/polymer composites with extremely low filler concentrations, but they usually exhibit high dielectric loss, inducing energy wastage and operational risk. In the past decade, considerable progress in reducing dielectric loss has been achieved though materials development and structural design and process engineering. This review first outlines the performance metrics and the history of capacitors and high-k polymer composites, followed by describing the latest developments in new material families, including metals, metal oxides, carbon nanomaterials, 2D (semi-)conductors and conducting polymers. In addition, particular focus is placed on the layered design strategy that can significantly increase the k, breakdown field, and energy density while reducing the dielectric loss and percolation threshold. Also, fundamental insights on them are discussed. The last part of this review is concluded with current challenges and future perspectives of these promising high-k materials and layered design strategy.
- Top Cited PapersOpen Access
- 15 May 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-11
Flexible and stretchable metal oxide nanofiber networks for multimodal and monolithically integrated wearable electronics
Fiber-based electronics enabling lightweight and mechanically flexible/stretchable functions are desirable for numerous e-textile/e-skin optoelectronic applications. These wearable devices require low-cost manufacturing, high reliability, multifunctionality and long-term stability. Here, we report the preparation of representative classes of 3D-inorganic nanofiber network (FN) films by a blow-spinning technique, including semiconducting indium-gallium-zinc oxide (IGZO) and copper oxide, as well as conducting indium-tin oxide and copper metal. Specifically, thin-film transistors based on IGZO FN exhibit negligible performance degradation after one thousand bending cycles and exceptional room-temperature gas sensing performance. Owing to their great stretchability, these metal oxide FNs can be laminated/embedded on/into elastomers, yielding multifunctional single-sensing resistors as well as fully monolithically integrated e-skin devices. These can detect and differentiate multiple stimuli including analytes, light, strain, pressure, temperature, humidity, body movement, and respiratory functions. All of these FN-based devices exhibit excellent sensitivity, response time, and detection limits, making them promising candidates for versatile wearable electronics.
- 15 May 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-11
Top Cited PapersOpen AccessFlexible and stretchable metal oxide nanofiber networks for multimodal and monolithically integrated wearable electronics
Fiber-based electronics enabling lightweight and mechanically flexible/stretchable functions are desirable for numerous e-textile/e-skin optoelectronic applications. These wearable devices require low-cost manufacturing, high reliability, multifunctionality and long-term stability. Here, we report the preparation of representative classes of 3D-inorganic nanofiber network (FN) films by a blow-spinning technique, including semiconducting indium-gallium-zinc oxide (IGZO) and copper oxide, as well as conducting indium-tin oxide and copper metal. Specifically, thin-film transistors based on IGZO FN exhibit negligible performance degradation after one thousand bending cycles and exceptional room-temperature gas sensing performance. Owing to their great stretchability, these metal oxide FNs can be laminated/embedded on/into elastomers, yielding multifunctional single-sensing resistors as well as fully monolithically integrated e-skin devices. These can detect and differentiate multiple stimuli including analytes, light, strain, pressure, temperature, humidity, body movement, and respiratory functions. All of these FN-based devices exhibit excellent sensitivity, response time, and detection limits, making them promising candidates for versatile wearable electronics.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 26, 5155-5160
Combined Control based on Passive Dynamic Walking for Variable Slope Walking
During the walking process with the variable slopes, a control strategy is proposed to keep the bipedal robot with knees walking stably. Concerning the change of slopes, a combined control strategy is designed based on Lyapunov stability and passive dynamic walking. This controller makes the gaits realize the smooth switch between different slopes in the given time. And the bipedal robots can walk stably on the variable slopes, and exhibit more robustness for environmental changes. The simulation results show the effectiveness of the proposed methods.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 26, 5155-5160
Combined Control based on Passive Dynamic Walking for Variable Slope Walking
During the walking process with the variable slopes, a control strategy is proposed to keep the bipedal robot with knees walking stably. Concerning the change of slopes, a combined control strategy is designed based on Lyapunov stability and passive dynamic walking. This controller makes the gaits realize the smooth switch between different slopes in the given time. And the bipedal robots can walk stably on the variable slopes, and exhibit more robustness for environmental changes. The simulation results show the effectiveness of the proposed methods.
- 1 May 2016
- Published by Tsinghua University Press in Nano Research
- Vol. 9 (5) , 1310-1318
Motion-based pH sensing using spindle-like micromotors
In this study, we report a spindle-like micromotor. This device, which is fabricated using a one-step electrospinning method, consists of biodegradable polycaprolactone and an anionic surfactant. Intriguingly, not only can the resulting micromotor move autonomously on the surface of water for a long period of time (~40 min) due to the Marangoni effect, but it also exhibits a pH sensing behavior due to variations in the surface tension caused by the release of surfactant under different pH conditions. More interestingly, we reveal that the motion-based pH sensing property is size-dependent, with smaller structures exhibiting a higher sensitivity. In addition, since polycaprolactone is a biodegradable material, the micromotor described in this study can be easily degraded in solution. Hence, features such as one-step fabrication, motion readout, and biodegradability render this micromotor an attractive candidate for sensing applications.
- 1 May 2016
- Published by Tsinghua University Press in Nano Research
- Vol. 9 (5) , 1310-1318
Motion-based pH sensing using spindle-like micromotors
In this study, we report a spindle-like micromotor. This device, which is fabricated using a one-step electrospinning method, consists of biodegradable polycaprolactone and an anionic surfactant. Intriguingly, not only can the resulting micromotor move autonomously on the surface of water for a long period of time (~40 min) due to the Marangoni effect, but it also exhibits a pH sensing behavior due to variations in the surface tension caused by the release of surfactant under different pH conditions. More interestingly, we reveal that the motion-based pH sensing property is size-dependent, with smaller structures exhibiting a higher sensitivity. In addition, since polycaprolactone is a biodegradable material, the micromotor described in this study can be easily degraded in solution. Hence, features such as one-step fabrication, motion readout, and biodegradability render this micromotor an attractive candidate for sensing applications.
- 4 February 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (6) , 4250-4257
Motion-Based pH Sensing Based on the Cartridge-Case-like Micromotor
In this paper, we report a novel cartridge-case-like micromotor. The micromotor, which is fabricated by the template synthesis method, consists of a gelatin shell with platinum nanoparticles decorating its inner surface. Intriguingly, the resulting cartridge-case-like structure exhibits a pH-dependent “open and close” feature, which originates from the pH responsiveness of the gelatin material. On the basis of the catalytic activity of the platinum nanoparticle inside the gelatin shell, the resulting cartridge-case-like structure is capable of moving autonomously in the aqueous solution containing the hydrogen peroxide fuel. More interestingly, we find out that the micromotor can be utilized as a motion-based pH sensor over the whole pH range. The moving velocity of the micromotor increases monotonically with the increase of pH of the analyte solution. Three different factors are considered to be responsible for the proportional relation between the motion speed and pH of the analyte solution: the peroxidase-like and oxidase-like catalytic behavior of the platinum nanoparticle at low and high pH, the volumetric decomposition of the hydrogen peroxide under the basic condition and the pH-dependent catalytic activity of the platinum nanoparticle caused by the swelling/deswelling behavior of the gelatin material. The current work highlights the impact of the material properties on the motion behavior of a micromotor, thus paving the way toward its application in the motion-based sensing field.
- 4 February 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (6) , 4250-4257
Motion-Based pH Sensing Based on the Cartridge-Case-like Micromotor
In this paper, we report a novel cartridge-case-like micromotor. The micromotor, which is fabricated by the template synthesis method, consists of a gelatin shell with platinum nanoparticles decorating its inner surface. Intriguingly, the resulting cartridge-case-like structure exhibits a pH-dependent “open and close” feature, which originates from the pH responsiveness of the gelatin material. On the basis of the catalytic activity of the platinum nanoparticle inside the gelatin shell, the resulting cartridge-case-like structure is capable of moving autonomously in the aqueous solution containing the hydrogen peroxide fuel. More interestingly, we find out that the micromotor can be utilized as a motion-based pH sensor over the whole pH range. The moving velocity of the micromotor increases monotonically with the increase of pH of the analyte solution. Three different factors are considered to be responsible for the proportional relation between the motion speed and pH of the analyte solution: the peroxidase-like and oxidase-like catalytic behavior of the platinum nanoparticle at low and high pH, the volumetric decomposition of the hydrogen peroxide under the basic condition and the pH-dependent catalytic activity of the platinum nanoparticle caused by the swelling/deswelling behavior of the gelatin material. The current work highlights the impact of the material properties on the motion behavior of a micromotor, thus paving the way toward its application in the motion-based sensing field.
- Open Access
- 13 November 2015
- Published by Springer Nature in Nano-Micro Letters
- Vol. 8 (2) , 157-164
Dual-Fuel-Driven Bactericidal Micromotor
In this paper, we report fabrication of the bimetallic Janus microsphere, a magnesium microsphere with a silver surface coating, through thermal evaporation technique. Because of the Janus structure, this micromotor can be propelled in two different directions by the surface silver or magnesium ‘engine’ and hydrogen peroxide or water fuel. In addition, due to the bactericidal property of silver, this autonomous micromotor is capable of killing bacteria in solution. As compared to the static one, the micromotor is able to kill the bacteria at a much faster rate (about nine times of that of the static one), demonstrating the superiority of the motion one. We thus believe that the micromotor shown in the current study is potentially attractive for the environmental hygiene applications.
- 13 November 2015
- Published by Springer Nature in Nano-Micro Letters
- Vol. 8 (2) , 157-164
Open AccessDual-Fuel-Driven Bactericidal Micromotor
In this paper, we report fabrication of the bimetallic Janus microsphere, a magnesium microsphere with a silver surface coating, through thermal evaporation technique. Because of the Janus structure, this micromotor can be propelled in two different directions by the surface silver or magnesium ‘engine’ and hydrogen peroxide or water fuel. In addition, due to the bactericidal property of silver, this autonomous micromotor is capable of killing bacteria in solution. As compared to the static one, the micromotor is able to kill the bacteria at a much faster rate (about nine times of that of the static one), demonstrating the superiority of the motion one. We thus believe that the micromotor shown in the current study is potentially attractive for the environmental hygiene applications.