Hamed Fathiannasab
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hamed Fathiannasab has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Jeff Gostick
Department of Chemical Engineering, University of Waterloo, ON, Canada
2 shared publications Likun Zhu
2 shared publications- Mohammad Amin Sadeghi
Department of Chemical Engineering, University of Waterloo, ON, Canada
2 shared publications - Zhongwei Chen
Chinese Academy of Sciences
2 shared publications Ali Ghorbani Kashkooli
Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
1 shared publication- Ali Ghorbani Kashkooli
Department of Chemical Engineering, Waterloo Institute for Nanotechnology, Waterloo Institute for Sustainable Energy, University of Waterloo, Waterloo ON N2L 3G1, Canada
1 shared publication
Latest Publications
- Open Access
- 1 December 2025
- Published by The International Society for Porous Media (InterPore) in InterPore Journal
- Vol. 2 (4) , IPJ011225-7
MAGNET: Medial Axis Guided Network Extraction Tool
Pore network models are useful for studying transport in porous materials in a computationally efficient way. Extraction of networks from volumetric images has evolved over the years, starting with medial axis-based approaches to more recent watershed segmentation. This paper reconsiders the classic medial axis method, which offers several advantages such as speed and topological correctness, and develops a modernized, updated, and improved version. The new method is named Medial Axis Guided Network Extraction Tool (MAGNET). It works by analyzing the skeleton of a porous material to identify pore centers at junctions and endpoints. Additional pore bodies are found on long throats using two different approaches. This work includes an efficient tool for calculating the cross-sectional area of throats with irregular shape by using walkers with an infinite mean-free path to probe the geometry orthogonal to the medial axis at the point of the throat constriction. This extra step was critical for obtaining an equivalent diameter needed to calculate the permeability. Lastly, MAGNET was written with computational efficiency in mind. The skeletonization approach was itself 4.2X faster than the SNOW watershed segmentation for a 10003 image. Additionally, a parallelized skeletonization was applied by processing the image in blocks with sufficient overlap which resulted in a 5.5X speed-up compared to the serial approach. To validate the output, MAGNET was tested on a 4003 voxel image of a Berea sandstone, and the flow and capillary properties of the extracted network were compared to the results from SNOW and the lattice-Boltzmann method. Structural information such as pore and throat size distribution and mercury intrusion curves was compared, and noticeable similarity was achieved. Crucially, the permeability predicted by MAGNET was within 5% of the lattice-Boltzmann prediction on the same image.
- 1 December 2025
- Published by The International Society for Porous Media (InterPore) in InterPore Journal
- Vol. 2 (4) , IPJ011225-7
Open AccessMAGNET: Medial Axis Guided Network Extraction Tool
Pore network models are useful for studying transport in porous materials in a computationally efficient way. Extraction of networks from volumetric images has evolved over the years, starting with medial axis-based approaches to more recent watershed segmentation. This paper reconsiders the classic medial axis method, which offers several advantages such as speed and topological correctness, and develops a modernized, updated, and improved version. The new method is named Medial Axis Guided Network Extraction Tool (MAGNET). It works by analyzing the skeleton of a porous material to identify pore centers at junctions and endpoints. Additional pore bodies are found on long throats using two different approaches. This work includes an efficient tool for calculating the cross-sectional area of throats with irregular shape by using walkers with an infinite mean-free path to probe the geometry orthogonal to the medial axis at the point of the throat constriction. This extra step was critical for obtaining an equivalent diameter needed to calculate the permeability. Lastly, MAGNET was written with computational efficiency in mind. The skeletonization approach was itself 4.2X faster than the SNOW watershed segmentation for a 10003 image. Additionally, a parallelized skeletonization was applied by processing the image in blocks with sufficient overlap which resulted in a 5.5X speed-up compared to the serial approach. To validate the output, MAGNET was tested on a 4003 voxel image of a Berea sandstone, and the flow and capillary properties of the extracted network were compared to the results from SNOW and the lattice-Boltzmann method. Structural information such as pore and throat size distribution and mercury intrusion curves was compared, and noticeable similarity was achieved. Crucially, the permeability predicted by MAGNET was within 5% of the lattice-Boltzmann prediction on the same image.
- 1 March 2022
- Published by Elsevier in Computers & Geosciences
- Vol. 162, 105086
Prediction of diffusional conductance in extracted pore network models using convolutional neural networks
- 1 March 2022
- Published by Elsevier in Computers & Geosciences
- Vol. 162, 105086
Prediction of diffusional conductance in extracted pore network models using convolutional neural networks
- 6 January 2020
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 167 (10) , 100558
Three-Dimensional Modeling of All-Solid-State Lithium-Ion Batteries Using Synchrotron Transmission X-ray Microscopy Tomography
In this study, a synchrotron transmission X-ray microscopy tomography system has been utilized to reconstruct the three-dimensional (3D) morphology of all-solid-state lithium-ion battery (ASSB) electrodes. The electrode was fabricated with a mixture of Li(Ni 1/3 Mn 1/3 Co 1/3 )O 2 , Li 1.3 Ti 1.7 Al 0.3 (PO 4 ) 3 , and super-P. For the first time, a 3D numerical multi-physics model was developed to simulate the galvanostatic discharge performance of an ASSB, elucidating the spatial distribution of physical and electrochemical properties inside the electrode microstructure. The 3D model shows a wide range of electrochemical properties distribution in the solid electrolyte (SE) and the active material (AM) which might have a negative effect on ASSB performance. The results show that at high current rates, the void space hinders the ions’ movement and causes local inhomogeneity in the lithium-ion distribution. The simulation results for electrodes fabricated under two pressing pressures reveal that higher pressure decreases the void spaces, leading to a more uniform distribution of lithium ions in the SE due to more facile lithium ion transport. The approach in this study is a key step moving forward in the design of 3D ASSBs and sheds light on the physical and electrochemical property distribution in the SE, active material, and their interface.
- 6 January 2020
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 167 (10) , 100558
Three-Dimensional Modeling of All-Solid-State Lithium-Ion Batteries Using Synchrotron Transmission X-ray Microscopy Tomography
In this study, a synchrotron transmission X-ray microscopy tomography system has been utilized to reconstruct the three-dimensional (3D) morphology of all-solid-state lithium-ion battery (ASSB) electrodes. The electrode was fabricated with a mixture of Li(Ni 1/3 Mn 1/3 Co 1/3 )O 2 , Li 1.3 Ti 1.7 Al 0.3 (PO 4 ) 3 , and super-P. For the first time, a 3D numerical multi-physics model was developed to simulate the galvanostatic discharge performance of an ASSB, elucidating the spatial distribution of physical and electrochemical properties inside the electrode microstructure. The 3D model shows a wide range of electrochemical properties distribution in the solid electrolyte (SE) and the active material (AM) which might have a negative effect on ASSB performance. The results show that at high current rates, the void space hinders the ions’ movement and causes local inhomogeneity in the lithium-ion distribution. The simulation results for electrodes fabricated under two pressing pressures reveal that higher pressure decreases the void spaces, leading to a more uniform distribution of lithium ions in the SE due to more facile lithium ion transport. The approach in this study is a key step moving forward in the design of 3D ASSBs and sheds light on the physical and electrochemical property distribution in the SE, active material, and their interface.
- 23 February 2019
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166 (4) , A605-A615
Application of Artificial Intelligence to State-of-Charge and State-of-Health Estimation of Calendar-Aged Lithium-Ion Pouch Cells
Accurate State-of-Charge (SOC) and State-of-Health (SOH) estimation of lithium-ion batteries (LIBs) is essential for the battery management system (BMS). For the first time, a feed-forward artificial neural network (ANN) has been used to estimate SOC of calendar-aged lithium-ion pouch cells. Calendar life data has been generated by applying galvanostatic charge/discharge cycle loads at different storage temperature (35°C and 60°C) and conditions (fully-discharged and fully-charged). The data has been obtained at various C-rates for duration of 10 months at one-month intervals. In order to include LIB hysteresis effect, two separate ANNs have been trained for charge and discharge data. The ANN have achieved a Root Mean Square Error (RMSE) of 1.17% over discharge data and 1.81% over charge data, confirming the ability of the network to capture input-output dependency. The calendar-aged battery data at various degradation conditions has been employed to train a new ANN to estimate SOH. The ANN has shown RMSE of 1.67%, demonstrating the network capability to estimate SOH. This study highlights the importance of considering aging effects in SOC estimates and the ability of ANN to include these effects efficiently.
- 23 February 2019
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166 (4) , A605-A615
Application of Artificial Intelligence to State-of-Charge and State-of-Health Estimation of Calendar-Aged Lithium-Ion Pouch Cells
Accurate State-of-Charge (SOC) and State-of-Health (SOH) estimation of lithium-ion batteries (LIBs) is essential for the battery management system (BMS). For the first time, a feed-forward artificial neural network (ANN) has been used to estimate SOC of calendar-aged lithium-ion pouch cells. Calendar life data has been generated by applying galvanostatic charge/discharge cycle loads at different storage temperature (35°C and 60°C) and conditions (fully-discharged and fully-charged). The data has been obtained at various C-rates for duration of 10 months at one-month intervals. In order to include LIB hysteresis effect, two separate ANNs have been trained for charge and discharge data. The ANN have achieved a Root Mean Square Error (RMSE) of 1.17% over discharge data and 1.81% over charge data, confirming the ability of the network to capture input-output dependency. The calendar-aged battery data at various degradation conditions has been employed to train a new ANN to estimate SOH. The ANN has shown RMSE of 1.67%, demonstrating the network capability to estimate SOH. This study highlights the importance of considering aging effects in SOC estimates and the ability of ANN to include these effects efficiently.
- 1 January 2017
- Published by Elsevier in Applied Thermal Engineering
- Vol. 110, 590-600
Development of a model to evaluate the water level impact on drain cooling in horizontal high pressure feedwater heaters
- 1 January 2017
- Published by Elsevier in Applied Thermal Engineering
- Vol. 110, 590-600
Development of a model to evaluate the water level impact on drain cooling in horizontal high pressure feedwater heaters