VKVictor Kovalskiy

Victor Kovalskiy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Victor Kovalskiy has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    THE EFFECT OF SPECIAL MODIFYING ADDITIVES ON THE PERFORMANCE PROPERTIES OF ROAD CEMENT CONCRETE UNDER CURRENT LOGISTICAL CHALLENGES

    by Viktor Pavlovych Kovalskyi, Vyacheslav Vladimirovich Varchuk, Alona Bondar, Volodymyr Ocheretnyi, Pavlo Olehovych Zoria

    Prospects are outlined for the development of intelligent road pavements with the integration of sensor systems, self-healing materials, and energy-generating technologies. The proposed approach forms the basis for the creation of a modern, resilient, and high-technology transport infrastructure. Experimental studies verified the high synergy of a "triad" of modifiers: 0.8% PCE MasterGlenium ACE, 0.05% AEA MasterAir, and 0.9 kg/m³ polypropylene microfibers. At W/C=0.34, this complex increases compressive strength from 45.2 to 61.4 MPa and flexural strength from 4.4 to 5.4 MPa. The resulting low-capillary matrix with pore-dampers reduces abrasion to 0.40 g/cm² and raises salt-frost resistance above F300+, neutralizing "shear impacts" during heavy vehicle braking. Early hydration kinetics show the modified concrete reaches 68% strength (35.4 MPa) on the 3rd day, whereas the control mix gains only 28% (12.6 MPa). This dynamic shortens traffic closure periods fourfold (opening routes in 3–7 days), allows timely joint cutting, and ensures optimal compatibility with slipform pavers. Life Cycle Cost (LCC) analysis under ISO 15686-5 proves that a 1–1.2% initial mix cost increase (210,000 UAH/km) extends the maintenance-free interval to 18 years. Integral NPV of the life cycle drops by 24%, reducing maintenance costs by 40% and yielding 3% fuel savings due to prolonged IRI stability.

  • Open Access

    CURRENT TRENDS IN THE DESIGN OF UNDERGROUND SPACES IN BUSINESS CENTERS

    by Viktor Kovalskyi, Anastasia Pavlivna Oleniuk, Pavlo Zoria

    The spatial and planning solutions of underground spaces in business centers are considered, combining the functions of shelters and parking. This approach promotes the efficient use of limited urban areas, which is highly relevant for modern urban development. Such multifunctional complexes not only address the issue of parking shortages but also integrate into the city’s infrastructure, creating opportunities for economic and social activity. The integration of shelters and parking facilities is a logical step that optimizes land use and provides civil protection for the population, highlighting the dual value of such structures. Designing these spaces requires an understanding of construction standards, safety requirements, and ergonomics to ensure maximum functionality and comfort. Efficient use of underground areas also reduces the load on surface land, freeing it up for green zones and sustainable urban development. These spaces serve not only as parking facilities but may also include commercial, administrative, and technical zones that meet the demands of the urban environment. The shelter function is fundamental in contemporary design amid conflicts and emergencies. Underground parking facilities can be quickly transformed into fully functional civil protection shelters equipped with life-support systems. This dual-purpose use of space demands a special approach to planning and engineering systems to ensure rapid transformation and compliance with safety regulations (DBN). Such solutions increase urban resilience and population safety. Underground spaces are equipped with modern engineering systems: water supply, ventilation, fire safety, heating, cooling, and automation. These systems enhance both efficiency and safety. Ventilation ensures air quality, while fire safety systems provide automatic suppression and evacuation. Automation optimizes system operations and reduces energy consumption. Modern monitoring systems and intelligent parking management improve functionality. The implementation of BIM technologies supports coordination and resource management. The design of underground spaces is based on the principles of flexibility and adaptability. Their function can change without significant capital investment. For example, part of a parking facility can be temporarily converted for exhibitions or events. This flexibility is valuable for business centers aiming to maximize asset utilization. The combination of functionality and engineering solutions defines the current trend in underground space design — the creation of multifunctional and adaptable environments. These can serve various purposes: parking, retail spaces, gyms, or data centers. This reflects the global trend toward multifunctionality in urban spaces and sustainable development. The development of such projects requires the involvement of highly qualified specialists. The implementation of new technologies is an integral part of the process. Ultimately, these underground complexes become key elements of modern infrastructure, contributing to economic growth, quality of life, and urban resilience.

  • Open Access

    THE BASIC CHANGES IN THE DESIGN OF MEDICAL AND HEALTH CENTRES

    by Victor Kovalskiy, Михайло Дмитрович Бондар, Volodymyr Liubarskyi, Віктор Павлович Ковальський, Володимир Сергійович Любарський

    The main changes in the design of healthcare centres are considered. New terminology is presented that will facilitate a more detailed development of the plan of a medical institution and give a better understanding of its functional features. A new concept of logistics has been proposed. The main objects are illuminated for better navigation. Functional connections between hospital departments have been improved, which will contribute to more efficient operation of the facility and better medical services. The concept of humanising the space was proposed to create a cosy atmosphere in the rooms. Examples of renovated wards in hospitals that will contribute to a more comfortable stay of patients are given. Attention is paid to the development of spaces that are easily accessible and convenient for users with disabilities, including patients with disabilities. Changes in the areas and conditions of stay in wards are considered. Changes in the areas of the main premises of healthcare centres in the new regulations and old ones, as well as new requirements for sanitary and hygienic premises, were analysed. The sterilisation unit was adapted to meet international quality and safety standards. Modern approaches to ensure the effective functioning of the department are taken into account Examples of ward plans and patient isolation rooms are provided. A classification of medical imaging rooms is provided to ensure a high level of safety and efficiency of diagnostics. Updated requirements for engineering equipment are considered. Modern approaches to energy-efficient design, including the use of renewable energy sources, optimisation of heating and air conditioning systems, have been taken into account, which will reduce costs and contribute to the creation of a healthy environment for patients and staff. All the necessary facilities to meet the needs of the staff are envisaged, which will provide medical staff with all the necessary conditions for proper work and rest, contributing to their productivity. The requirements for the design of ventilation, heating and lifts have been updated. The design of civil protection facilities was introduced to ensure the safety of staff and patients in case of emergencies

  • Open Access

    INNOVATIVE SOLUTIONS IN THE PRODUCTION OF DRY CONSTRUCTION MIXTURES BASED ON TPP FLY ASH

    by Viktor Kovalskiy, Vitalii Tymoshenko, Павло Степанович Боднар, Михайло Дмитрович Бондар, Віктор Павлович Ковальський, Віталій Олександрович Тимошенко

    An overview of modern research and experience in the use of fly ash in construction is carried out, examples of successfulcases of its application are given.The prospects of using fly ash, which occurs during the burning of coal in thermal power plants, in construction were studied.Fly ash, which is a byproduct of coal combustion, has great potential for reuse in the construction industry, which contributes toreducing the environmental burden and increasing the efficiency of the production of construction materials.The paper discusses in detail different methods of fly ash activation, such as mechanical, chemical and thermal activation, aswell as combined approaches that combine these methods to achieve optimal results. Mechanical activation involves increasingthe specific surface area of ash by grinding it, which helps to increase its reactivity. Chemical activation involves the use of various chemical reagents to increase the activity of ash, and thermal activation is based on increasing the solubility of silica and alumina with increasing temperature.Particular attention is paid to the use of nanomaterials, such as nanosilica, nanotitanium and nanoalumina, which cansignificantly improve the properties of construction mixtures. Nanomaterials help increase strength, reduce porosity and improve water resistance of mixtures. The use of polymer additives, such as polyvinyl acetate, latexes and polyethylene glycol, which increase the adhesion, elasticity and water resistance of building materials, is also considered.The influence of ash on the strength of building materials, as well as their resistance to aggressive factors, is considered. Inaddition, the impact of using ash on the energy efficiency of building materials and reducing carbon dioxide emissions isconsidered.The development of new formulations of construction mixtures using fly ash helps to increase their strength, durability andenvironmental safety. The article gives examples of the practical application of such mixtures, in particular, in self-leveling screeds for floors, plaster and putty mixtures, adhesive mixtures for tiles and waterproofing materials. Key benefits of these innovative solutions are highlighted, including lower production costs, improved material performance and reduced environmental impact.The research results show that the use of fly ash in construction has great potential. It allows to reduce the use of primarymaterials, improve the quality of construction materials and reduce the negative impact of the construction industry on theenvironment.The article emphasizes the importance of using fly ash and innovative additives for the sustainable development of theconstruction industry and suggests promising directions for further research in this field.

  • Open Access

    Influence of Deicer on Water Stability of Asphalt Mixture under Freeze–Thaw Cycle

    by Mingjun Guo, Viktor Pavlovich Kovalskiy, Tengfei Nian, Ping Li

    In seasonal frozen soil areas, the repeated freeze–thaw cycle of internal moisture in asphalt mixture in winter and spring will accelerate the peeling of asphalt film and aggravate the water damage of asphalt pavement. It is of great significance to carry out the attenuation law of mechanical properties of asphalt mixture under freeze–thaw cycles to prevent and reduce the economic losses caused by water damage to asphalt pavement. This study will investigate the impact of deicer application on the water stability of asphalt mixtures within the climatic conditions prevalent in Northwest China. Specifically, freeze–thaw cycle tests were administered to two types of dense-graded asphalt mixtures under three distinct deicer solutions and three disparate low-temperature environments. The Marshall water immersion test and freeze–thaw splitting test were employed to evaluate the water stability of asphalt mixtures subject to multiple factors, and the relative importance of each factor was statistically analyzed using the acquired data. Results demonstrated that AC-13 and AC-16 asphalt mixtures (AC is asphalt-concrete, which is asphalt concrete, and 13 or 16 represents the maximum particle size of aggregate (13 mm or 16 mm)), saturated in 15% CH4N2O, 20% NaCl, and 20% CH2CH3OH solutions, underwent a varying number of freezing–thawing cycles (0, 5, 10, 15, 20, 25, and 30) at temperatures of −5 °C, −15 °C, and −25 °C, respectively, displayed a discernible decline in their residual stability MS0 and freeze–thaw splitting tensile strength ratio TSR. This decline was particularly marked when temperatures dropped below the solution’s freezing point. Disregarding the fixed factors of weather variation (different low-temperature environments) and road service duration (number of freezing–thawing cycles), the aggregate grading imposed a more pronounced influence on asphalt mixture water stability than the presence of deicers.


  • Open Access

    THE INFLUENCE OF DEICING SALT ON AIR VOIDS OF ASPHALT MIXTURE UNDER FREEZE-THAW CYCLE

    by Victor P. Kovalskiy, Guo Mingjun

    The extensive use of deicing salt has not only solved the problem of road icing but also had a serious impact on the pavement, reducing its lifespan. In order to deeply understand the impact of deicing salt on the air voids of asphalt mixture in the northwest climate of China, this paper conducted freeze-thaw cycle tests on AC-13 and AC-16 asphalt mixtures under three different deicing salt solutions and three different low-temperature environments, and analyzed the changes in air voids, meanwhile, the Logistic prediction model was used to evaluate the change characteristics of the air voids. The experimental results showed that the air voids of asphalt mixture increased to varying degrees after multiple freeze-thaw cycles; when the temperature was above its freezing point, no frost heave damage occurred, and the air voids increased slowly; when the temperature was below the freezing point, frost heave damage occurred, causing rapid growth and connection of voids in the mixture, and the air voids increased rapidly; the Logistic model showed a good fit with the observed changes in air voids.


  • Open Access

    PRINCIPLES OF QUALITATIVE REVITALIZATION OF PUBLIC SPACES

    by Victor P. Kovalskiy, Альона Василівна Бондар, Vita S. Abramovych

    Faced with the restrictions imposed on most Ukrainian cities due to increased quarantine due to the pandemic, all major recreational activities of the society began to take place in open urban spaces, which would allow to attract the necessary social distance. Respecting this trend, it is necessary to create a sufficient number of public spaces in the city that would meet all the needs of society. The latest articles substantiate the urgency of updating the public space in the city, the need to introduce new approaches to redevelopment for inactive urban areas. The main reasons for their degradation and the use of demand for certain functions that may carry a certain area are identified. Researched and deduced what features and principles contribute to the positive change of public space and its restoration in the urban system. When writing the last work, foreign and domestic experience was analyzed in accordance with each of the principles of revitalization of public spaces.


  • Open Access

    ANALYSIS OF WAYS TO INCREASE RADIATION PROTECTION OF BUILDING MATERIALS

    by Vinnytsia National Technical University, V. Kovalskiy, M. Drukovanyy, Y. Oliinyk

    The paper considers the problems of environmental pollution by radiation-hazardous and environmentally harmful elements. Radiation-hazardous pollution occurs in several directions, namely under the influence of constant natural radiation background, due to Chernobyl emissions, nuclear energy production, pollution of rivers and lakes, the use of building materials with high content of natural radionuclides. At present, Ukraine has suspended comprehensive measures to reduce radiation pollution in the construction industry due to the lack of effective methods to combat environmental safety and improve the demographic situation in the country. As ways to increase the radiation-protective properties of building materials, variants of structural models, construction technologies are considered, the introduction and improvement of which is a prospect of scientific development of the construction industry. For environmentally safe, economically feasible, systematically operated operation of building structures and construction sites in general, it is essential to adhere to the principles of radiation protection by optimizing the resource characteristics of the respective facilities. Therefore, the analysis of the relevance of the above methods of creating high-quality building materials, taking into account the indicators of increasing the radiation-protective properties of building materials.

  • Open Access

    FEATURES OF REVITALIZATION OF PUBLIC BUILDINGS IN THE CENTER OF VINNITSA

    by Vinnytsia National Technical University, V. Kovalskiy, Альона Василівна Бондар, V. Abramovych, Віктор Павлович Ковальський, Віта Сергіївна Абрамович

    Today, the problem of rational use of urban space is acute due to the constant growth of urban population and urbanization of the world in general. The aging of construction stock in the city center requires the reconstruction or reconstruction of certain buildings and structures. The article defines the concept of "revitalization" and the general features of this process, its advantages and disadvantages. The urgency of revitalization for the cities of Ukraine is determined and the need to restore not only factories but also public buildings in the center of these settlements is highlighted. In the course of writing this work, the foreign experience of revitalization of public buildings in the already formed urban spaces and several works of domestic scientists on the topic of revitalization as a method of environmental restoration were analyzed. The center of Vinnytsia has been studied for the presence of buildings that could be subject to revitalization, study of their previous purpose and assessment of the current state. An analysis of the problems that may arise during the revitalization of abandoned public buildings and areas in the center of Vinnytsia was also conducted. After the study, based on the results obtained, ways to eliminate these problems and variations of technical solutions required for construction work are identified. The peculiarities of the introduction of revitalization of public buildings in the center of Vinnytsia have been clarified.

  • Open Access

    FEATURES OF BUSINESS CENTERS FORMATION

    by Vinnytsia National Technical University, V. Kovalskiy, O. Shamraeva

    У статті з’ясовано зміст поняття «бізнес-центри», «бізнес-парки». Визначено актуальність архітектурних рис. Зафіксовано важливу функціональну відмінність між бізнес-центрами і бізнес-парками. Визначено передумови виникнення бізнес-центрів. Наведено класифікацію за якою формуються «бізнес-центри», «ділові центри» та «бізнес-парки». Охарактеризовано кожен клас щодо відповідності їм бізнес-центрів. Розглянуто приклади бізнес-центрів в м.Київ та м.Вінниця для різних класів. Наведено відмінності між класами. Визначено цінність кожного класу в окремих функціональних районах міст. Сформовано завдання для проектування бізнес-центрів, які далі приведено в систему. Виокремлено основні процеси, що відбуваються в закордонних та вітчизняних бізнес-центрах. Виявлено основні функції, які необхідні для повноцінного існування бізнес-центрів. Визначено дві основні планувальні схеми, які формують об’ємно-просторову і планувальну структури бізнес-центрів. Розглянуто відповідність вимогам комбінованого планування. З’ясовано основні групи приміщень, що мають бути запроектовані в бізнес-центрах. Наведено види заходів, що найчастіше проходять у бізнес-центрах. Запропоновано рішення щодо раціонального розміщення груп приміщень в залежності від заходів, що проводяться. Сформовано таблицю з залежністю зв’язків між головними та допоміжними обслуговуючими приміщеннями у бізнес-центрах. Визначено найбільш бажані та необхідні зв’язки між групами. Розглянуто особливості містобудівного, функціонального та планувального формування. Проаналізовано сучасний рівень розвитку бізнес-центрів. Наведено основний принцип об'ємно-просторової побудови бізнес-центрів. Виявлено найбільш сучасний і основний принцип створення універсального та здатного до трансформації простору. Запропоновано використання гнучкого планування.