Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Suharno Suharno has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pengembangan Media Pembelajaran Interaktif Berbasis Web Pada Mata Pelajaran Basis Data Untuk Sekolah Menengah Kejuruan

    by Urupan Marpaung, Budri Tri Cahyono, Suharno Suharno

    Penelitian ini bertujuan untuk mengembangkan dan mengevaluasi media pembelajaran interaktif berbasis Web Storyline pada mata pelajaran Basis Data di SMK Negeri 2 Mandrehe, Kabupaten Nias Barat. Latar belakang penelitian ini berangkat dari permasalahan rendahnya minat belajar siswa terhadap materi basis data yang bersifat abstrak, serta dominasi metode ceramah konvensional dalam proses pembelajaran. Penelitian ini menggunakan metode Research and Development (R&D) dengan model pengembangan ADDIE, yang mencakup lima tahap: Analysis, Design, Development, Implementation, dan Evaluation. Produk yang dikembangkan berupa media pembelajaran interaktif berbasis web, yang divisualisasikan dengan elemen teks, gambar, video, dan kuis interaktif. Hasil validasi menunjukkan bahwa media dinyatakan layak digunakan, dengan skor kelayakan dari ahli materi sebesar 72,3% dan ahli media sebesar 78,54%. Uji implementasi dilakukan dengan desain one-group pretest-posttest pada 32 siswa kelas XI Rekayasa Perangkat Lunak. Analisis data menggunakan uji N-gain menunjukkan peningkatan minat belajar siswa dalam kategori tinggi, dengan skor N-gain sebesar 0,71 berdasarkan penilaian siswa dan 0,80 dari pengamatan guru. Hasil ini menunjUruukkan bahwa media pembelajaran interaktif yang dikembangkan tidak hanya layak digunakan, tetapi juga efektif dalam meningkatkan minat belajar siswa terhadap materi basis data. Penelitian ini memberikan kontribusi signifikan dalam pengembangan media pembelajaran di wilayah 3T dan dapat menjadi rujukan dalam inovasi pembelajaran berbasis teknologi.


  • Open Access

    The Influence of Industrial Internship and Self-Efficacy on Teaching Readiness of Mechanical Engineering Education Graduates

    by Muhammad Akhyar, Wita Hidayati, Suharno Suharno, Ranto Ranto

    The Influence of Industrial Internship and Self-Efficacy on Teaching Readiness of Mechanical Engineering Education Graduates

  • Open Access

    Evaluation of the Factory Implementation of the CIPP Method in Indonesian Vocational Education

    by Ida Nugroho Saputro, Aryanti Nurhidayati, Suharno Suharno, Chandra Winiawati, Revira Yunika, Mutiara Porista Kusumadevi

    Education is a crucial component of human resource development. Education will impact the quality of graduates and serve as a standard for business and industry. However, due to the resulting disparities, education becomes a serious issue, resulting in a high unemployment rate. One of the initiatives to improve the quality of education, particularly vocational education, is the implementation of the teaching factory. This study's objective is to evaluate the implementation of a teaching factory in vocational education, specifically at Vocational High School 2 Klaten for building majors. In this instance, the Directorate of Vocational High School Development evaluates the implementation of the teaching factory in the fields of expertise Building Modeling and Information Design (DPIB) and Building Concentration, Sanitation, and Maintenance (KGSP). In this study, context, input, process, and product (CIPP) were examined using a quantitative methodology known as purposeful sampling. According to the findings, the implementation of a teaching factory in vocational education remains insufficient due to a number of constraints, including a lack of human resources, infrastructure, and industry collaboration.


  • Open Access

    THE INFLUENCE OF RELIGIOUS ATTITUDES ON VOCATIONAL HIGH SCHOOL STUDENTS'S WORK READINESS

    by Diyana Indah Sari, Suharno Suharno, Nugroho Agung Pambudi

    This study aims to determine the influence of religious attitudes on vocational high school students's work readiness. This study used a quantitative approach with a descriptive design. The population in this study were all students of Vocational High School 1 Kismantoro, Vocational High School 1 Bulukerto, Vocational High School 1 Pracimantoro, a total of 2477 students, and the sample taken was 97 respondents. The sampling technique used in this research is simple random sampling technique formula is used to determine the number of samples Slovin. The method used in this research is a quantitative approach with a survey design. Data was collected by distributing closed questionnaires of 42 questions to respondents. The data analysis technique used in this research is simple linear regression analysis. The results showed that religious attitudes had a positive and significant effect on the work readiness of vocational high school students with an R square of 0.6451. This means that religious attitudes have an influence on the work readiness of vocational high school students by 64.51% and the rest is influenced by other variables.


  • Open Access

    ANALISIS MINAT BEKERJA DAN STUDI LANJUT SISWA SMK DI KOTA SURAKARTA DITINJAU DARI AKADEMIK DAN EKONOMI

    by Hapsari Zaena, Suharno Suharno, Ranto Ranto

    The purpose of this research is to : 1) influence academic and economy to interest enter world industri SMK students throughout Surakarta and influence academic and economist to interest studies carry on SMK students in Surakarta. Method research used in study this that is with method study quantitative descriptive . Population used by 452 students with taking sampel by Simple Random Sampel as many as 213 students . The data collected used questionnaire questionnaire . Technique analysis used that is technique analysis multiple linear regression . Results study show that : 1) there is significant influence between academic variabels to interest enter industrial world with sig value 0.023 < 0.05. 2) there significant influence between economic variabels to interest enter industrial world with sig value 0.00 0.05.

  • Open Access

    Comparative Study of The Conventional Curing Machine with The Electric at Aluna Masaran Batik Manufacturer Industry

    by Aji Widi Kuncoro, Dewa Akbar Rasta Pradana, Muhammad Ghozali, Muhammad Ridwan, Muhammad Sholeh, Suharno S., Joemintono J.

    The batik industry is constantly increasing its production. During production, a curing machine is used to dry the batik after the printing/screening process. The main problem with conventional machines is their inability to produce maximum heat. Currently, they are used in most industries and generate uneven heat, with LPG gas as the main fuel. Therefore, this study aims to develop an electric curing machine as an alternative to overcome the challenges of the conventional type It was carried out using a sample of the experimental test site selected through a purposive sampling method, namely the Aluna Batik industry in Masaran, Sragen. The data were collected by observing the outcomes of mechanical engineering and analyzed using descriptive methods. The results showed that conventional curing provides an advantage in the speed of heat supply, while electric curing stabilizes heat requirements. This showed that the electric machine is more profitable for large and fast quantities production, while the conventional is ideal for daily production.


  • Open Access

    The influence of digital and vocational information literacy on student learning outcomes

    by Heru Setiyawan, Suharno Suharno, Nugroho Agung Pambudi

    Vocational students are confronted by intricate demands once they graduate. Despite the considerable need for vocational graduates in the workforce, most students have a limited understanding of digital and vocational information. This study used a descriptive quantitative method to determine the influence of digital and vocational information literacy on students' learning outcomes in three vocational schools in the Sragen Regency. Cluster Random Sampling was used to select a sample of 111 students. Data on digital and vocational information literacy were collected using a questionnaire, while those on the learning outcomes were obtained from the student’s grades. The results showed that digital literacy influences vocational students’ learning outcomes with a significance of 0.000 0.05. Vocational information literacy influences the students’ learning outcomes with a significance of 0.000 0.05. Furthermore, digital and vocational information literacy simultaneously influence the students’ learning outcomes with a significance of 0.000 0.05. These results indicate the necessity to familiarize and increase the students’ literacy skills to improve learning outcomes. The results indicated that digital and vocational literacy partially and collectively influenced learning outcomes by 48.2%. Therefore, classroom instruction needs to be structured around learning models that actively stimulate the development of digital and vocational literacy skills, preparing students for workplace competitions. Consequently, teachers should consistently implement learning strategies that create a meaningful connection between the school environment and the realities of the professional world.


  • Top Cited Papers
    Open Access

    Renewable Energy in Indonesia: Current Status, Potential, and Future Development

    by Nugroho Agung Pambudi, Ridho Alfan Firdaus, Reza Rizkiana, Desita Kamila Ulfa, Muntasy Syahrul Salsabila, Suharno, Sukatiman

    The current use of fossil fuels has a significant impact on increasing greenhouse gas (GHG) emissions. Subsequently, renewable energy is significantly needed to reduce GHG, thereby limiting the impact of extreme weather and climate while ensuring reliable, timely, and cost-effective supply. As a big country with a huge amount natural resource, the demand for renewable energy in Indonesia has increased along with the rise in consumption. Following this, energy consumption increased by 0.99%, which was approximately 939.100 million BOE in 2021 for biogas, oil, electricity, natural gas, coal, LPG, biodiesel, and biomass. Energy consumption in several sectors including transportation has the largest energy consumption with approximately 45.76% of oil. In industries and households sector, the consumption rates are 31.11% for boiler steam generation purposes and 16.89% for electricity as well as LPG. Furthermore, the commercial sector consumes 4.97% of energy for lighting and air conditioning, while the remaining 1.27% is used for other sectors. Meanwhile, Indonesia has high potential for renewable energy at 419 GW including 75 GW of hydro energy, 23.7 GW of geothermal, 32.6 GW of bioenergy, 207.8 GW of solar, 60.6 GW of wind, and 19.3 GW of micro-hydro. Therefore, the main focus of this paper is to provide a detailed analysis of the current status, prospects, and information on Indonesia’s renewable and sustainable energy sources. Furthermore, the novelty of this research entails updating the latest data related to renewable energy and its availability in Indonesia. The essence is to portray a picture of its potential development in the future.


  • Open Access

    Pengembangan Sintaks Pembelajaran Pola Berbasis CAD untuk Meningkatkan Hasil Belajar Siswa pada Mata Pelajaran Busana Industri

    by Erna Sawitri, Suharno Suharno, Chundakus Habsya

    Banyak manajer perusahaan garmen mengeluh rendahnya kemampuan lulusan SMK dalam mengembangkan pola digital. Berdasarkan data Bursa Kerja Khusus (BKK) menunjukkan bahwa kemampuan mengembangkan pola hanya sebesar 0,5%. Hal ini terjadi karena keterampilan membuat pola secara digital belum dipelajari di sekolah. Desain pembelajaran dengan pendekatan konstruktif yang selama ini diterapkan diduga menjadi penyebab lemahnya keterampilan lulusan. Tujuan penelitian ini adalah mengetahui tingkat efektivitas pengembangan model pembelajaran berbasis Computer Aided Desaign (CAD) di SMK. Jenis penelitian ini adalah research is development (R&D) dan mengadopsi model pengembangan ADDIE. Subjek uji adalah siswa SMK Jurusan Tata Busana. Hasil penelitian menunjukkan bahwa penggunaan model pembelajaran berbasis CAD dalam pembuatan pola di SMK jurusan Tata Busana terbukti lebih efektif dari pada pembuatan pola secara konstruktif. Hal ini dapat dilihat dari peningkatan hasil belajar siswa, waktu pembuatan pola lebih cepat, dan keaktifan siswa dalam belajar meningkat


  • Open Access

    The Effects of Learning Design on Learning Activities Based on Higher Order Thinking Skills in Vocational High Schools

    by Dainita Rachmawati, Suharno Suharno, Roemintoyo Roemintoyo

    The twenty-first century requires Vocational High School (VHS) graduates to have high-order thinking skills (HOTS). Although HOTS-based learning in VHS has been implemented in Indonesia, the graduates are less creative in complex work. Also, teachers have insufficient knowledge about this learning design. Therefore, the purpose of this study was to examine the relationship between learning implementation and planning, specifically focusing on the knowledge of teachers in planning lessons. To measure this knowledge, several aspects were established based on the concept of Anderson and Krathwohl’s Taxonomy 2001. The concept was used to measure knowledge, which was categorized into the factual, conceptual, procedural, and meta-cognitive dimensions. To analyze each dimension, critical thinking, creativity, collaboration, and communication were employed as key elements. A quantitative approach with a survey design and a random sample of productive subject teachers was used. Cross-sectional analysis and F-test were applied to the primary data using multiple linear regression. According to the F-test results, planning aspects simultaneously affect the implementation of HOTS-based learning in VHS. This is because the calculated F-value was greater than the table F-value. HOTS-based learning activities can be easily achieved in case the lesson plan has the same basis.