CSChristopher Sugino

Christopher Sugino

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Christopher Sugino has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Portable through-metal ultrasonic power transfer using a dry-coupled detachable transmitter

    by A. Allam, H. Patel, C. Sugino, C. St. John, J. Steinfeldt, C. Reinke, A. Erturk, I. El-Kady


  • Open Access

    Digital programming of reciprocity breaking in resonant piezoelectric metamaterials

    by Mustafa Alshaqaq, Christopher Sugino, Alper Erturk

    We demonstrate a digitally controlled piezoelectric metamaterial waveguide leveraging resonant, spatiotem-porally modulated synthetic impedance circuits for programmable reciprocity breaking. Piezoelectric metamaterials have effective stiffness that depends on the shunt circuitry connected to each unit cell, offering greatly increased design freedom over their purely mechanical counterparts. By connecting a digitally controlled synthetic impedance shunt circuit to each unit cell of the metamaterial domain, the effective stiffness is externally programmed according to a desired profile in space and time. Specifically, we present threefold capabilities in this electromechanical system: (1) smooth parameter modulation (no abrupt switching) through synthetic impedance circuits that eliminate cumbersome analog electrical components, (2) resonant electromechanical modulation in space and time so that one does not have to operate near the Bragg band gap, and (3) precise digital programming by numerically entering the space and time properties of the domain. We also demonstrate the frequency conversion in narrow-band excitation centered at a directional band gap. The experimental results are compared against high-fidelity multiphysics finite-element simulations, yielding excellent agreement for this class of digitally programmable nonreciprocal elastic metamaterials.


  • Spatially programmable wave compression and signal enhancement in a piezoelectric metamaterial waveguide

    by Christopher Sugino, Mustafa Alshaqaq, Alper Erturk

    We demonstrate high-precision dispersion tailoring in a metamaterial waveguide for wave compression and spatially tunable signal amplification. Spatial control over refractive index is achieved via digital controllers connected to piezoelectric unit cells. The digital shunt circuits allow numerically optimized circuit parameters to be uploaded directly to the experimental platform, enabling arbitrary spatial programming of the refractive index of the waveguide. Thus, the system acts as a reconfigurable piezoelectric array, altering the wavelength and group velocity of a given wave according to user specifications. In this work, optimizations are performed to implement gradual wave compression, realizing an effect analogous to that of an acoustic black hole. At the operating frequency of the design, the waveguide exhibits increased sensitivity and amplification of piezoelectric voltage output due to the compressed wavelength, shunt circuit resonance, and gradual variation in unit cell properties, avoiding internal reflections. Numerical and experimental results show that voltage amplification can be achieved in a desired position and frequency in the metamaterial waveguide.


  • Duffing-type digitally programmable nonlinear synthetic inductance for piezoelectric structures

    by Obaidullah Alfahmi, Christopher Sugino, Alper Erturk

    Piezoelectric shunt damping techniques using linear circuits (e.g. resistive-inductive) and switching circuits (e.g. synchronized switch on inductor) have been extremely well studied for suppressing resonant vibrations in flexible structures. Both analog circuits and synthetic impedance circuits with digital control have been explored for linear concepts. In a parallel body of work, from the domain of mechanical methods of vibration attenuation, it is also known that leveraging nonlinearities (e.g. stiffness nonlinearity) can enhance the frequency bandwidth and offer amplitude-dependent suppression over a range of frequencies. However, the existing piezoelectric shunt damping techniques have been mostly limited to linear or switching nonlinear circuits, with the exception of a few nonlinear capacitance efforts. This work aims to introduce cubic inductance to emulate Duffing-type hardening nonlinearity in the shunt circuit with precise digital programming and tuning capability. Experiments are performed on a piezoelectric bimorph cantilever under base excitation for concept demonstration and model validation. First, linear frequency response functions of the cantilever are obtained for the short- and open-circuit conditions, and for linear resistive-inductive synthetic shunt damping, to confirm the standard linear behavior and electromechanical model parameters. Then, cubic inductance is introduced to the circuit and nonlinear experiments (up- and down-frequency sweep) are conducted. Cantilever tip to base motion transmissibility frequency response is measured along with piezoelectric voltage to base motion counterpart for a range of base excitation amplitudes. The distortion of the frequency response curves with increased base acceleration levels is observed. The nonlinear cubic coefficient is then varied to alter the manifestation of nonlinear frequency response at a given base excitation level, demonstrating the ease of tuning and triggering the nonlinear behavior on demand by means of the digitally-controlled synthetic impedance shunt. Nonlinear electromechanical model simulations are also validated against the experiments, yielding a very good agreement.


  • Harnessing rainbow trapping via hybrid electromechanical metastructures for enhanced energy harvesting and vibration attenuation

    by Jonatha Santini, Christopher Sugino, Emanuele Riva, Alper Erturk

    Rainbow trapping is a phenomenon that enables vibration confinement due to the gradual variation of the wave velocity in space, which is typically achieved by means of locally resonant unit cells. In the context of electromechanical metastructures for energy harvesting, this strategy is employed to improve mechanical-to-electrical energy conversion and thereby to maximize the harvested power. In contrast to structures endowed with either mechanical or electromechanical resonators, we investigate a hybrid configuration that leverages the synergistic interplay between them. We compare numerical results for different grading laws in comparison to prior efforts on the topic, demonstrating enhanced energy harvesting and wideband vibration attenuation capabilities of the hybrid metastructure. We also discuss the formation of grading-induced localized modes and we shed light on the role of the motion of individual resonators on the overall power output increase.


  • Machined phononic crystals to block high-order Lamb waves and crosstalk in through-metal ultrasonic communication systems

    by Christopher Sugino, Romain Gerbe, Ehren Baca, Charles Reinke, Massimo Ruzzene, Alper Erturk, Ihab El-Kady

    For systems that require complete metallic enclosures (e.g., containment buildings for nuclear reactors), it is impossible to access interior sensors and equipment using standard electromagnetic techniques. A viable way to communicate and supply power through metallic barriers is the use of elastic waves and ultrasonic transducers, introducing several design challenges that must be addressed. Specifically, the use of multiple communication channels on the same enclosure introduces an additional mechanism for signal crosstalk between channels: guided waves propagating in the barrier between channels. This work numerically and experimentally investigates a machined phononic crystal to block MHz Lamb wave propagation between ultrasonic communication channels, greatly reducing wave propagation and the resulting crosstalk voltage. Blind grooves are machined into one or both sides of a metallic barrier to introduce a periodic unit cell, greatly altering the guided wave dispersion in the barrier. Numerical simulations are used to determine a set of groove geometries for testing, and experiments were performed to characterize the wave-blocking performance of each design. The best-performing design was tested using piezoelectric transducers bonded to the barrier, showing a 14.4 dB reduction in crosstalk voltage. The proposed periodic grooving method is a promising technique for completely isolating ultrasonic power/data transfer systems operating in a narrow frequency range.


  • Programmable Rainbow Trapping and Band-Gap Enhancement via Spatial Group-Velocity Tailoring in Elastic Metamaterials

    by Mustafa Alshaqaq, Christopher Sugino, Alper Erturk

    We numerically and experimentally investigate spatially programmable rainbow trapping and band-gap enhancement using a graded piezoelectric metamaterial beam with unit cells shunted to synthetic impedance circuits. The local inductive shunt resonant frequency of each unit cell is different and follows a predefined spatial variation along the beam length. We explore the effect of various grading profiles on the spatial wave trapping and on the attenuation bandwidth. Experiments are performed on a clamped-clamped metamaterial beam with 29 piezoelectric elements shunted to synthetic impedance circuits with gradually varying inductance. Numerical simulations and experimental results reveal that, over a frequency band containing all resonant frequencies of unit cells, propagating elastic waves can be trapped uniformly or nonuniformly along the beam, and that the spatial trapping pattern follows the respective target frequency grading profile. Additionally, substantial band-gap enhancement is observed (as high as 75% increase) as compared with the identical resonators counterpart. Overall, the results show the versatility of this class of graded piezoelectric metamaterials and support the design of such programmable piezoelectric metastructures.