MSMedeina Steponavičiūtė

Medeina Steponavičiūtė

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Medeina Steponavičiūtė has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Application of Magnetic Chitosan Composite for Adsorption of Polyethylene Terephthalate (PET) and Polystyrene (PS) Nanoplastics

    by Galina Lujanienė, Mahrosh Javed, Tayyab Tahir, Sergej Šemčuk, Aušra Selskienė, Vidas Pakštas, Martynas Talaikis, Audrius Drabavičius, Gerarda Jocytė, Karina Kuzborskaja, et al.

    A magnetic chitosan composite was applied to study the adsorption of nanoplastics (NPs), prepared from single-use plastic bottles and packaging materials by mechanical fragmentation (MF) and nanoprecipitation (NPR), on magnetic biopolymer. The resulting polystyrene (PS) and polyethylene terephthalate (PET) samples were characterised by SEM, TEM, DLS, zeta potential and ATR-FTIR. The magnetic chitosan composite (MCSC) was prepared by synthesising Fe3O4 nanoparticles and modifying chitosan through crosslinking. Batch experiments were conducted to study the adsorption of PSNPR, PETNPR, and PETMF nanoplastics on the magnetic chitosan composite. Changes during the adsorption process were monitored using UV–Vis spectroscopy. The maximum efficiencies of PSNPR and PETMF are 97% and 94%, respectively, at pH 5, whereas the maximum efficiency of PETNPR is 94% at pH 6. The Langmuir maximum adsorption capacity (qm) values for PSNPR, PETNPR, and PETMF are 26.7, 13.8, and 19.4 mg g−1, respectively. The Freundlich and Langmuir isotherms, thermodynamic studies, as well as pseudo-first-order and pseudo-second-order models, were applied to study the adsorption behaviour of nanoparticles on the magnetic chitosan composite. The XPS and FT-IR data for pristine and adsorbed nanoplastics as well as modelling results indicated complex adsorption mechanisms.

  • Open Access

    Comparative Adsorption of PET and PS Nanoplastics onto Graphene Oxide–Cellulose and Graphene Oxide–Chitosan Composites: Thermodynamic, Kinetic, and Isotherm Studies

    by Mahrosh Javed, Galina Lujanienė, Sergej Šemčuk, Tayyab Tahir, Aušra Selskienė, Vidas Pakštas, Audrius Drabavičius, Martynas Talaikis, Gerarda Jocytė, Vaidas Klimkevičius, et al.

    Polyethylene terephthalate (PET) and polystyrene (PS) nanoplastics are major aquatic contaminants due to their high persistence, mobility, and potential ecological impacts. In this study, PET–NPs and PS–NPs were prepared by nanoprecipitation, and the adsorption of both types of nanoplastics by graphene oxide–chitosan (GO–CS), graphene oxide–microcrystalline cellulose 50µm (GO–MCC50µm), and graphene oxide–microcrystalline cellulose 90µm (GO–MCC90µm) composites was systematically investigated. The structural and physical properties of the materials were characterized using transmission electron microscopy (TEM), pHpzc analysis, Dynamic Light Scattering (DLS), zeta potential, and X-ray photoelectron spectroscopy (XPS). Batch adsorption experiments evaluated the effects of pH, contact time, initial concentration, and temperature on adsorption efficiency, while the adsorption mechanism was analyzed through kinetic, isotherm, and thermodynamic studies. The maximum Langmuir adsorption capacities for PS–NPs were 13.60, 12.59, and 11.19 mg·g−1 for GO–CS, GO–MCC50µm, and GO–MCC90µm composites, respectively. The maximum adsorption capacities for PET–NPs were 56.17, 33.33, and 23.20 mg·g−1 for GO–CS, GO–MCC50µm, and GO–MCC90µm composites, respectively. This study provides new insights into the effects of adsorbent surface chemistry, particle size, and nanoplastic morphology on adsorption processes, highlighting graphene oxide–polysaccharide composites as promising eco-friendly materials for nanoplastic removal from aqueous media.


  • Open Access

    Expanding the Molecular Switches Toolbox: Photoreloadable Dithienylethene Mechanophores

    by Medeina Steponavičiūtė, Debashis Majee, Bisheng Zhao, Liviu Ungur, Stanislav Presolski

    Molecular switches are often thought of as nanoscopic equivalents to the electrical buttons and knobs ubiquitous in everyday life. However, mechanical force is rarely used to reversibly trigger rearrangements at the atomic scale, due to the difficulty in selectively breaking certain bonds, while keeping others intact. Here, we introduce two new mechanophores based on dithienylethene (DTE), which can be toggled between two states by ultraviolet light and sonication. Attaching various lengths of poly(ϵ‐caprolactone) either to the 2,2′ or the 5,5′ positions of the DTE core allowed us to study the kinetics of its mechanochemical cycloreversion. We employed computational methods to understand the root causes of the observed mechano‐regiochemical differences. Lastly, we show that our best performing DTE‐polymer conjugate can undergo numerous switching cycles by the alternating action of electromagnetic radiation and mechanical force.


  • Open Access

    Expanding the Molecular Switches Toolbox: Photoreloadable Dithienylethene Mechanophores

    by Medeina Steponavičiūtė, Debashis Majee, Bisheng Zhao, Liviu Ungur, Stanislav Presolski

    Molecular switches are often thought of as nanoscopic equivalents to the electrical buttons and knobs ubiquitous in everyday life. However, mechanical force is rarely used to reversibly trigger rearrangements at the atomic scale, due to the difficulty in selectively breaking certain bonds, while keeping others intact. Here, we introduce two new mechanophores based on dithienylethene (DTE), which can be toggled between two states by ultraviolet light and sonication. Attaching various lengths of poly(ϵ‐caprolactone) either to the 2,2′ or the 5,5′ positions of the DTE core allowed us to study the kinetics of its mechanochemical cycloreversion. We employed computational methods to understand the root causes of the observed mechano‐regiochemical differences. Lastly, we show that our best performing DTE‐polymer conjugate can undergo numerous switching cycles by the alternating action of electromagnetic radiation and mechanical force.


  • Open Access

    13th century leather footwear from Vilnius Lower Castle

    by Arūnas Puškorius, Jurgita Kalėjienė, Medeina Steponavičiūtė, Povilas Blaževičius

    Publisher: Klaipėdos universitetas, Journal: Archaeologia Baltica, Title: 13th century leather footwear from Vilnius Lower Castle, Authors: Arūnas Puškorius, Jurgita Kalėjienė, Medeina Steponavičiūtė , During the archaeological excavations in the territory of the Palace of the Grand Dukes in Vilnius, the remains of leather footwear dating back to the late 13th century was discovered. These were only the cut-off lower parts of the footwear, a pair inserted one into the other and stored in a box together with other exceptional artefacts of that time. The footwear was made of expensive dyed goat leather. The luxurious leather items of footwear were reconstructed on the basis of various conducted artefact tests and studies. Based on the construction properties, it can be assumed that they were intended for indoor wear. Artefacts of analogous construction are only rarely discovered. Known examples were discovered during the excavations in Velikii Novgorod, Tver, Hrodna and several other locations to the east of the Baltic Sea. The artefacts from these territories date back to the late 11th to early 14th centuries.

  • Open Access

    Synthesis and Study of Thermoresponsive Amphiphilic Copolymers via RAFT Polymerization

    by Marija Kavaliauskaite, Medeina Steponaviciute, Justina Kievisaite, Arturas Katelnikovas, Vaidas Klimkevicius

    Synthesis and study of well-defined thermoresponsive amphiphilic copolymers with various compositions were reported. Kinetics of the reversible addition-fragmentation chain transfer (RAFT) (co)polymerization of styrene (St) and oligo(ethylene glycol) methyl ether methacrylate (PEO5MEMA) was studied by size exclusion chromatography (SEC) and 1H NMR spectroscopy, which allows calculating not only (co)polymerization parameters but also gives valuable information on RAFT (co)polymerization kinetics, process control, and chain propagation. Molecular weight Mn and dispersity Đ of the copolymers were determined by SEC with triple detection. The detailed investigation of styrene and PEO5MEMA (co)polymerization showed that both monomers prefer cross-polymerization due to their low reactivity ratios (r1 < 1, r2 < 1); therefore, the distribution of monomeric units across the copolymer chain of p(St-co-PEO5MEMA) with various compositions is almost ideally statistical or azeotropic. The thermoresponsive properties of p(St-co-PEO5MEMA) copolymers in aqueous solutions as a function of different hydrophilic/hydrophobic substituent ratios were evaluated by measuring the changes in hydrodynamic parameters under applied temperature using the dynamic light scattering method (DLS).


  • Synthesis and Properties of Cationic Gradient Brush Copolymers Carrying PEO Side Chains and Catechol Moieties

    by Medeina Steponaviciute, Vaidas Klimkevicius, Ricardas Makuska

    Synthesis and study of brush copolymers carrying long PEO side chains and catechol moieties are reported. Kinetics of reversible‐addition‐fragmentation chain‐transfer copolymerization of 2‐(dimethylamino) ethyl methacrylate (DMAEMA) and poly(ethylene glycol) methyl ether methacrylate (PEOMEMA) is studied by size exclusion chromatography (SEC) and 1H NMR spectroscopy, which allow calculating not only copolymerization rate but also the evolution of copolymer composition during copolymerization. Molecular weight Mn and dispersity Ð of the copolymers are determined by SEC with triple detection. Well defined gradient copolymers p(DMAEMA‐co‐PEOMEMA) of various composition with degree of polymerization close to 100 and Ð less than 1.18 are synthesized. For attachment of catechol moieties and introduction of positive charge, DMAEMA units are quaternized with 2‐chloro‐3,4‐dihydroxyacetophenone. The use of tetrahydrofuran as a solvent for that reaction allows obtaining the degree of quaternization close to 100%. Positively charged catechol brush copolymers and their solutions are characterized by 1H NMR, fourier‐transform infrared spectroscopy), and ultraviolet–visible spectroscopy, potentiometric titration, and water contact angle measurements, and their properties are compared with those of similar neutral catechol brush copolymers.