NRNataliia Rott

Nataliia Rott

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Nataliia Rott has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Structural Assessment of AISI 316L Pipes under Internal Pressure Using Analytical and Finite Element Methods

    by Nataliia Rott, Zoia Sazanishvili, Olexandr Tverdokhlib, Bohdan Tsymbal

    Corrosion-resistant pipes operating under internal pressure are critical components in chemical, energy, and petrochemical industries, where reliability and long-term performance are essential. The present study aims to provide an integrated assessment of material selection and structural performance for pipelines operating in aggressive environments. Austenitic stainless steel AISI 316L was selected based on its superior resistance to chloride-induced corrosion, good weldability, and stable mechanical properties. The required wall thickness was determined analytically using the thin-walled cylinder approach, considering operational pressure and safety factors. To validate the design, a three-dimensional finite element model was developed in Autodesk Inventor, incorporating realistic geometry, welded joints, and boundary conditions. The results show that the calculated wall thickness of 3.76 mm ensures safe operation at an internal pressure of 6 MPa. Finite element analysis revealed that the maximum equivalent stress does not exceed 128 MPa, with a minimum safety factor of 1.56. The maximum displacement was found to be less than 0.1 mm, indicating high structural stiffness and stability. Stress concentrations were localized in geometrically complex regions; however, they remained within allowable limits. The novelty of the study lies in the combined application of analytical and numerical approaches for the validation of pipe design under combined mechanical and environmental loading. The proposed methodology provides a reliable framework for the design and optimization of corrosion-resistant pipelines, ensuring safety, durability, and cost-effectiveness in aggressive operating conditions.

  • Predicting the yield strength of aluminum alloys of the Al–Mg–Sc–Zr system, taking into account grain and disperse strengthening

    by Z. V. Sazanishvili, N. O. Rott

    The modern development of mechanical engineering, transport, and aerospace technology is driving demand for lightweight structural materials with high mechanical properties and corrosion resistance. In this context, Al–Mg aluminum alloys are promising due to their combination of low density, high strength characteristics, and manufacturability. At the same time, during the casting of aluminum alloy billets, there is a tendency for them to form a coarse-grained structure, segregation, and porosity, which negatively affects the yield strength. Therefore, it is important to develop approaches to controlling the microstructure and predicting the mechanical properties of cast alloys. The aim of this work is to study the patterns of formation of the mechanical properties of Al–Mg alloys, microalloyed with Sc and Zr and modified with SiC nanoparticles, as well as to develop a combined approach to predicting the yield strength, taking into account the main strengthening mechanisms. The object of the study is to predict the yield strength of Al–6Mg alloys in different structural states, namely after casting, thermal and thermo-mechanical treatment. Experimental studies included metallographic analysis, scanning electron microscopy with EDS, and tensile testing. It was shown that the initial cast alloy has a coarse-grained structure (400…500 μm) and a yield strength of 150…200 MPa. Microalloying with Sc and Zr ensures the formation of Al₃(Sc,Zr) particles, grain refinement to 250…300 μm, and an increase in σt to 270…310 MPa. The additional introduction of SiC nanoparticles in combination with thermal and thermo-mechanical treatment allows the grain size to be reduced to 100…150 μm and the yield strength to be increased to 350…400 MPa. A combined approach was used to predict σt, taking into account grain, solid solution, dispersion, and deformation strengthening. The calculated values of the yield strength are in good agreement with the experimental ones (the deviation does not exceed 5…7%). The results obtained confirm the possibility of using microstructural parameters to predict the mechanical properties of cast aluminum alloys and can be applied at the stage of designing new materials and technological modes.

  • Open Access

    МАТЕРІАЛОЗНАВЧІ ДОСЛІДЖЕННЯ ДЛЯ ПОКРАЩЕННЯ ПРАЦЕЗДАТНОСТІ ТА ТРИВАЛОСТІ ЕКСПЛУАТАЦІЇ СОНЯЧНИХ ПАНЕЛЕЙ

    by Наталія Олександрівна Ротт, Зоя Віталіївна Сазанішвілі, Артур Геннадійович Кротенко, Юрій Олексійович Коміссаров

    У час глобального енергетичного переходу сонячна енергетика відіграє ключову роль у формуванні сталого майбутнього. Проте не всі сонячні панелі однаково ефективні та довговічні. У статті розглянуто матеріалознавчі аспекти компонентів сонячних панелей з метою визначення чинників, що впливають на їхню ефективність і термін служби, а також пошуку шляхів їх покращення шляхом оптимізації матеріалів і технологій виготовлення.Мета дослідження – проаналізувати матеріалознавчі фактори, що впливають на ефективність і довговічність сонячних панелей, та визначити можливості їх покращення шляхом оптимізації матеріалів і технологій виготовлення.Методологія досліджень полягає у застосуванні методів оптичної мікроскопії для аналізу матеріалів сонячних панелей. Дослідження мікроструктури дозволило визначити дефекти, неоднорідності та особливості будови матеріалів, що впливають на їх ефективність і довговічність.Наукова новизна дослідження полягає у встановленні взаємозв’язку між мікроструктурними особливостями матеріалів сонячних панелей та їх експлуатаційними характеристиками. Використання оптичної мікроскопії дозволило виявити дефекти та неоднорідності, що безпосередньо впливають на ефективність і довговічність панелей, а також обґрунтувати роль цих факторів у зниженні працездатності конструкцій. Аналіз сонячної панелі, яка експлуатувалася понад 10 років, показав, що захисне скло містить високу концентрацію оксиду кальцію (CaO ~80,3%), що забезпечує термостійкість і механічну міцність. Також виявлено діоксид телуру (TeO₂ ~5%), який підвищує оптичну прозорість. Тильна підкладка містила карбід титану (TiC ~82,8%), що забезпечує ефективне тепловідведення, високу електропровідність та стійкість до деформацій. Вторинні оксиди (PbO, Cs₂O, BaO) виконують роль стабілізаторів, підвищуючи цілісність матеріалу при термошоках. Мікроскопічний аналіз показав зернисту структуру багатокристалічного кремнію та наявність дефектів, що можуть знижувати ефективність переносу електронів і прискорювати деградацію.Дослідження підтвердило, що ефективність і довговічність сонячних панелей визначаються не лише електронними компонентами, а й матеріалознавчими характеристиками – складом і структурою захисного скла, тильної підкладки та фотоелектричного шару. Використання кальцієвого скла, телуритових добавок та карбіду титану знижує деградацію, підвищує термостійкість та стійкість до УФ-випромінювання, а також покращує оптичні і електропровідні властивості. Подальші дослідження наноструктурованих покриттів TiC і оптимізації скла відкривають перспективи для створення більш ефективних і довговічних фотоелектричних систем.

  • Influence of vibration treatment on the structure formation and properties of hypereutectic silumin

    by N. O. Rott, Z. V. Sazanishvili

    The article presents the results of a comprehensive study of the influence of vibration treatment on the crystallization processes, structure formation, and property changes of hypereutectic silumin. The research was carried out on aluminum alloy samples of the Al–Si system, in which eutectic silicon was present in the form of thin plates with a thickness ranging from 0.5 to 10 μm. To reproduce controlled solidification conditions, castings were produced in graphite crucibles. During solidification, vibration oscillations in the frequency range of 20–300 Hz were applied to the melt, which made it possible to investigate the effects from low-frequency beating to resonance and over-resonance modes. It was established that at a frequency of 20 Hz thin silicon plates undergo damage, partially detach, and form nuclei of pseudo-primary crystals. The most pronounced changes occur at a frequency of 50 Hz, when resonance interaction of oscillations with the melt is realized. In this regime, massive fracture of the plates, intensive growth of silicon crystal side facets, formation of a significant volume fraction of pseudo-primary crystals, and appearance of a characteristic "rim" around them were observed. X-ray diffraction analysis revealed the occurrence of additional reflections identified as a hexagonal modification of silicon, which forms analogously to the well-known transformation of the cubic diamond lattice into lonsdaleite. It was found that the presence of the hexagonal phase contributes to an increase in the microhardness of the alloy. With a further increase in vibration frequency up to 300 Hz, the effects of plate destruction were significantly reduced, while polytypic silicon forms with lower hardness appeared in the structure. This led to an overall decrease in the strengthening effect of vibration treatment. As a result, a nonlinear relationship between the frequency of applied vibrations and the morphological and phase transformations in the Al–Si system was established. Resonance treatment proved to be the most effective for targeted structure refinement and improvement of the properties of hypereutectic silumin. The obtained results can be used for the development of technologies for controlling the crystallization of aluminum alloys in foundry production in order to enhance their mechanical and operational properties.

  • Open Access

    Effect of temperature on the behavior of composite concrete: numerical modeling

    by Nataliia Rott, Yevhenii Piliuhin

    Aim: The purpose of this study is to evaluate the fire resistance of concrete elements reinforced with glass fiber reinforced polymer (GFRP) bars through numerical modeling of thermo-mechanical behavior and to identify the critical factors that govern the loss of load-bearing capacity under fire conditions. Methods: The research was carried out using the ANSYS software package in a sequential approach: first, a heat transfer analysis was performed according to the ISO 834 fire curve, and then the results were applied in a static structural analysis. Temperature-dependent material properties of concrete, GFRP, and the FRP–concrete interface were defined, while failure was assessed based on multiple criteria (thermal, deformation, and bond-related). Results: Time–temperature curves and through-thickness profiles were obtained, demonstrating the effectiveness of the concrete cover during the early stages of heating. It was found that the degradation of GFRP properties begins at the glass transition temperature (~120 °C) and becomes critical in the 200–250 °C range, which governs the failure of the element. Analysis of equivalent plastic strains confirmed that concrete retains its residual strength longer than the reinforcement. Scientific novelty: A comprehensive numerical approach to assessing the fire resistance of FRP-RC elements is proposed, combining the concrete damage plasticity model with temperature-dependent characteristics of GFRP and the bond interface. It is shown that degradation of the polymer matrix in the reinforcement, rather than the concrete itself, is the primary factor leading to structural failure. Practical significance: The results provide a basis for recommendations on the design and fire protection of FRP-RC elements, particularly by increasing the thickness of the concrete cover, applying matrices with higher glass transition temperatures, and using additional fire protection coatings.

  • Open Access

    INNOVATIVE BUILDING PROJECT WITH THE IMPLEMENTATION OF ENERGY-SAVING TECHNOLOGIES

    by I.D. Savytskyi, Н. О. Ротт, I.M. Matsiuk, І. Д. Савицький

    The article presents the concept of an innovative residential facility designed in accordance with the principles of environmental friendliness, energy efficiency, and sustainable development. An architectural and engineering model is proposed that involves the comprehensive integration of autonomous water, energy, and heat supply systems, including technologies such as heat exchange water supply systems, rainwater collection and multi-stage filtration, a bioreactor for organic waste processing with methane release, a ventilation system with efficient heat recovery, and solar energy collectors for both electricity and thermal energy generation. The spatial arrangement of utilities and engineering networks is based on principles of optimizing natural energy flows, taking into account the orientation of the building relative to the cardinal directions, and aligning with the architectural logic and functionality of the internal layout. The overarching goal is to minimize dependence on external energy sources, reduce operational costs, and demonstrate the practical feasibility of implementing advanced energy-saving and environmentally responsible technologies in a residential setting. The purpose of the article is to develop and validate a model of an ecological individual residential building with a high degree of autonomy and a comprehensive integration of energy-efficient and water-saving systems that ensure long-term sustainability and a significant reduction in the load on centralized infrastructure. Conclusions. During the research, the effectiveness of integrating modern eco-technologies into both the design and practical operation of a residential building was confirmed. The developed eco-house model demonstrates a significant reduction in overall energy consumption, lower levels of harmful emissions, and a more rational use of available natural resources compared to conventional residential construction. The proposed project proves the real-world viability and relevance of eco-housing in Ukraine and confirms the feasibility of its implementation as one of the strategic directions of sustainable development. In the future, it is advisable to expand the scope of research to include the development of similar concepts for multi-storey residential buildings and to conduct a detailed analysis of the socio-economic impacts and potential benefits of a large-scale transition to environmentally sustainable housing solutions.

  • Study of the Kinetics of Plastic Deformation Propagation in a Welded Joint of 10G2FB Steel after Submerged Arc Welding

    by Dmytro Laukhin, Oleksandr Beketov, Nataliia Rott, Bohdan Tsymbal

    The study investigates the kinetics of plastic deformation propagation in a welded joint of 10G2FB steel after submerged arc welding. A metallographic analysis of the microstructure of the weld seam, fusion zone, and heat-affected zone was performed. Tensile testing and electron microscopy studies were conducted to determine the mechanisms of plastic deformation and crack initiation. It was found that the fusion zone is the most vulnerable to the formation of deformation defects, which can affect the durability of the structure. Recommendations for optimizing welding parameters to improve the mechanical properties of welded joints are proposed.


  • Open Access

    Prospects of application of composite reinforcement in the construction industry

    by Yevhenii Piliuhin, Nataliia Rott

    Problem. In the context of the ongoing conflict in the country, the need for metals in military applications highlights the importance of exploring alternative materials for the construction sector. This paper addresses the problem of corrosion in traditional metal reinforcement, which significantly affects the durability and safety of structures. Goal.The goal of this study is to evaluate the prospects of using composite reinforcement in construction, focusing on its mechanical properties, corrosion resistance, and overall performance compared to conventional metal reinforcement. Methodology. The methodology employed includes a comparative analysis of the physical and mechanical properties of metal and composite reinforcement, as well as a review of relevant literature on corrosion mechanisms and protection methods for building materials. Results indicate that composite reinforcement not only offers superior corrosion resistance but also significantly reduces weight, enhancing the overall efficiency of construction projects. Originality.The originality of this study lies in its comprehensive examination of the benefits and challenges of implementing composite materials in the construction industry, especially in regions facing resource constraints due to war. Additionally, the findings underscore the potential of composite reinforcement to improve infrastructure resilience while decreasing reliance on traditional metal resources. Practical value. The practical value of this research is evident in its implications for building practices, providing guidelines for the integration of composite reinforcement into new construction projects. By highlighting the advantages of composite materials, this study contributes to the ongoing discourse on sustainable construction practices and resource-efficient engineering solutions, ultimately supporting the development of more resilient infrastructure in challenging environments.


  • Analysis of the Effects of Welding Conditions on the Microhardness of Low-Carbon Low-Alloy Steels

    by Dmytro Laukhin, Kyrylo Ziborov, Nataliia Rott, Sergey Fedoryachenko

    Achieving dependable connections in open construction settings presents challenges or renders the use of stationary machines and equipment complicated, if not impossible. Therefore, there is a particular focus on the requirements for welding processes. Of particular interest is ensuring the strength and reliability of welded joints, especially through processes developed subsequent to the solidification of the weld at the weld zone. The extent of the thermal influence zone is contingent upon the welding conditions and the properties of the metal being welded. Hence, research into the impact of welding conditions on the formation of the structure of the welded zone and the thermal influence zone remains pertinent.


  • Influence of Temperature-Strain Parameters of Shelters Reinforcing Materials on Increasing Properties in the Z-Direction

    by Dmytro Laukhin, Kyrylo Ziborov, Sergey Fedoryachenko, Nataliia Rott

    The work introduces an improved mode of production of steel sheets of the C355Zh2 type recommended for industrial use in factory conditions in Ukraine; this contributed to reducing the dispersion of the values of the strength and plasticity indicators of the finished product and increasing the yield of suitable products obtained using the proposed mode of controlled rolling.