Bethan Charles
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Bethan Charles has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Mark T. Weller
Department of Chemistry & Centre for Sustainable Chemical Technologies, University of Bath, Claverton Down, Bath BA2 7AY, U.K.
6 shared publications - Rachel C. Evans
University of Cambridge
5 shared publications Adrián Francisco-López
Institut de Ciència de Materials de Barcelona (ICMAB-CSIC), Campus UAB, 08193 Bellaterra, Spain
4 shared publicationsMiquel Garriga
Institut de Ciència de Materials de Barcelona (ICMAB-CSIC), Campus UAB, 08193 Bellaterra, Spain
4 shared publications- Alejandro Rodolfo Goñi
Institut de Ciència de Materials de Barcelona, ICMAB-CSIC, Campus UAB, 08193 Bellaterra, Spain
3 shared publications - Mariano Campoy-Quiles
Department of Nanostructured Materials, Institut de Ciència de Materials de Barcelona, ICMAB-CSIC, Bellaterra, Spain
3 shared publications
Latest Publications
- Open Access
- 19 November 2026
- Published by American Chemical Society (ACS) in ChemRxiv
LabSense: A Digital Workflow for Measuring and Reducing Resource Consumption in Research Labs
Laboratory science carries a disproportionately large environmental footprint, driven by intensive energy use, reliance on singleuse plastics, hazardous waste generation, and resource-heavy infrastructure, despite widespread desire among researchers to operate more sustainably. Yet many scientists lack the data needed to identify where to begin or which interventions would be most effective. To address this gap, we introduce LabSense, a modular, open‑source platform built on Raspberry Pi hardware that continuously monitors electricity consumption, water usage, fumehood operation, waste generation and chemical inventory in a typical materials chemistry lab. By transforming previously invisible behaviours and resource streams into real‑time, actionable data, LabSense enables evidence‑based decision making, behavioural change, and operational optimisation, providing a practical pathway toward data‑driven sustainable lab practice.
- 19 November 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessLabSense: A Digital Workflow for Measuring and Reducing Resource Consumption in Research Labs
Laboratory science carries a disproportionately large environmental footprint, driven by intensive energy use, reliance on singleuse plastics, hazardous waste generation, and resource-heavy infrastructure, despite widespread desire among researchers to operate more sustainably. Yet many scientists lack the data needed to identify where to begin or which interventions would be most effective. To address this gap, we introduce LabSense, a modular, open‑source platform built on Raspberry Pi hardware that continuously monitors electricity consumption, water usage, fumehood operation, waste generation and chemical inventory in a typical materials chemistry lab. By transforming previously invisible behaviours and resource streams into real‑time, actionable data, LabSense enables evidence‑based decision making, behavioural change, and operational optimisation, providing a practical pathway toward data‑driven sustainable lab practice.
- Open Access
- 10 January 2025
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 6 (3) , 1089-1096
Methacrylate-based copolymers as tunable hosts for triplet–triplet annihilation upconversion
The ability to convert light to higher energies through triplet–triplet annihilation upconversion (TTA-UC) is attractive for a range of applications including solar energy harvesting, bioimaging and anti-counterfeiting. Practical applications require integration of the TTA-UC chromophores within a suitable host, which leads to a compromise between the high upconversion efficiencies achievable in liquids and the durability of solids. Herein, we present a series of methacrylate copolymers as TTA-UC hosts, in which the glass transition temperature (Tg), and hence upconversion efficiency can be tuned by varying the co-monomer ratios (n-hexyl methacrylate (HMA) and 2,2,2-trifluoroethyl methacrylate (TFEMA)). Using the model sensitiser/emitter pair of palladium(II) octaethylporphyrin (PdOEP) and diphenylanthracene (DPA), the upconversion quantum yield was found to increase with decreasing glass transition temperature, reaching a maximum of 1.6 ± 0.2% in air at room temperature. Kinetic analysis of the upconversion and phosphorescence decays reveal that increased PdOEP aggregation in the glassy polymers leads to a competitive non-radiative relaxation pathway that quenches the triplet state. Notably, the threshold intensity is highly sensitive to the glass transition temperature, ranging from 1250 mW cm−2 for PHMA90TFEMA10 (Tg = −9.4 °C) to ∼200 mW cm−2 for more ‘glassy’ hosts, e.g. PHMA33TFEMA67 (Tg = 20.1 °C), suggesting the TTA-UC mechanism switches from diffusion-based collisions to triplet exciton migration at localised sensitiser–emitter pairs.
- 10 January 2025
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 6 (3) , 1089-1096
Open AccessMethacrylate-based copolymers as tunable hosts for triplet–triplet annihilation upconversion
The ability to convert light to higher energies through triplet–triplet annihilation upconversion (TTA-UC) is attractive for a range of applications including solar energy harvesting, bioimaging and anti-counterfeiting. Practical applications require integration of the TTA-UC chromophores within a suitable host, which leads to a compromise between the high upconversion efficiencies achievable in liquids and the durability of solids. Herein, we present a series of methacrylate copolymers as TTA-UC hosts, in which the glass transition temperature (Tg), and hence upconversion efficiency can be tuned by varying the co-monomer ratios (n-hexyl methacrylate (HMA) and 2,2,2-trifluoroethyl methacrylate (TFEMA)). Using the model sensitiser/emitter pair of palladium(II) octaethylporphyrin (PdOEP) and diphenylanthracene (DPA), the upconversion quantum yield was found to increase with decreasing glass transition temperature, reaching a maximum of 1.6 ± 0.2% in air at room temperature. Kinetic analysis of the upconversion and phosphorescence decays reveal that increased PdOEP aggregation in the glassy polymers leads to a competitive non-radiative relaxation pathway that quenches the triplet state. Notably, the threshold intensity is highly sensitive to the glass transition temperature, ranging from 1250 mW cm−2 for PHMA90TFEMA10 (Tg = −9.4 °C) to ∼200 mW cm−2 for more ‘glassy’ hosts, e.g. PHMA33TFEMA67 (Tg = 20.1 °C), suggesting the TTA-UC mechanism switches from diffusion-based collisions to triplet exciton migration at localised sensitiser–emitter pairs.
- Open Access
- 16 September 2021
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 9 (39) , 13914-13925
Aggregation-induced emission from silole-based lumophores embedded in organic–inorganic hybrid hosts
The incorporation of silole-based lumophores into a photoactive organic–inorganic ureasil host via covalent grafting or physical mixing results in enhanced photoluminescence through aggregation and host–guest energy transfer.
- 16 September 2021
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 9 (39) , 13914-13925
Open AccessAggregation-induced emission from silole-based lumophores embedded in organic–inorganic hybrid hosts
The incorporation of silole-based lumophores into a photoactive organic–inorganic ureasil host via covalent grafting or physical mixing results in enhanced photoluminescence through aggregation and host–guest energy transfer.
- Open Access
- 1 May 2021
- Published by Wiley in Advanced Photonics Research
- Vol. 2 (6) , 2000196
The Role of Polyhedral Oligomeric Silsesquioxanes in Optical Applications
The popularity of polyhedral oligomeric silsesquioxanes (POSS) for use in hybrid organic–inorganic materials and devices has grown in the past two decades due to desirable properties such as good thermal stability and biocompatibility, as well as their potential to be functionalized for a wide range of applications, from polymer composites to optoelectronics. Herein, the role of POSS for photonic applications, including sensing, bioimaging, and optoelectronic devices, is summarized. Functionalized POSS building blocks commonly incorporated with luminescent materials are identified, and areas of potential growth within the field are discussed. The addition of POSS to light‐emitting materials is widely shown to prevent aggregation in organic lumophores and inorganic nanocrystals, leading to reduced photoluminescence quenching. The POSS unit is also capable of acting as a passivating agent for nanocrystals and thin films, improving the emission quantum yields of photoluminescent materials and devices. POSS therefore offers the potential to enhance both the functional and photonic properties of cutting‐edge hybrid technologies.
- 1 May 2021
- Published by Wiley in Advanced Photonics Research
- Vol. 2 (6) , 2000196
Open AccessThe Role of Polyhedral Oligomeric Silsesquioxanes in Optical Applications
The popularity of polyhedral oligomeric silsesquioxanes (POSS) for use in hybrid organic–inorganic materials and devices has grown in the past two decades due to desirable properties such as good thermal stability and biocompatibility, as well as their potential to be functionalized for a wide range of applications, from polymer composites to optoelectronics. Herein, the role of POSS for photonic applications, including sensing, bioimaging, and optoelectronic devices, is summarized. Functionalized POSS building blocks commonly incorporated with luminescent materials are identified, and areas of potential growth within the field are discussed. The addition of POSS to light‐emitting materials is widely shown to prevent aggregation in organic lumophores and inorganic nanocrystals, leading to reduced photoluminescence quenching. The POSS unit is also capable of acting as a passivating agent for nanocrystals and thin films, improving the emission quantum yields of photoluminescent materials and devices. POSS therefore offers the potential to enhance both the functional and photonic properties of cutting‐edge hybrid technologies.
- Open Access
- 22 May 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (21) , 11694-11702
Synthetic factors affecting the stability of methylammonium lead halide perovskite nanocrystals
Lead halide perovskite nanocrystals (PNCs) have emerged as promising candidates for use in optoelectronic devices. Significant focus has been directed towards optimising synthetic conditions to obtain PNCs with tunable emission properties. However, the reproducible production of stable PNC dispersions is also crucial for fabrication and scale-up of these devices using liquid deposition methods. Here, the stability of methylammonium lead halide (MAPbX3 where X = Br, I) PNCs produced via the ligand-assisted reprecipitation process is explored. We have focussed on understanding how different combinations of specific synthetic factors – dilution, halide source and ratio as well as capping-ligand concentration – affect the stability of the resultant PNC dispersion. Photoluminescence spectroscopy, transmission electron microscopy and dynamic light scattering studies revealed that subtle changes in the reaction conditions lead to significant changes in the particle morphology and associated optical properties, often with catastrophic consequences on stability. This study highlights the importance of designing PNC dispersions in order to make more efficient and reliable optoelectronic devices.
- 22 May 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (21) , 11694-11702
Open AccessSynthetic factors affecting the stability of methylammonium lead halide perovskite nanocrystals
Lead halide perovskite nanocrystals (PNCs) have emerged as promising candidates for use in optoelectronic devices. Significant focus has been directed towards optimising synthetic conditions to obtain PNCs with tunable emission properties. However, the reproducible production of stable PNC dispersions is also crucial for fabrication and scale-up of these devices using liquid deposition methods. Here, the stability of methylammonium lead halide (MAPbX3 where X = Br, I) PNCs produced via the ligand-assisted reprecipitation process is explored. We have focussed on understanding how different combinations of specific synthetic factors – dilution, halide source and ratio as well as capping-ligand concentration – affect the stability of the resultant PNC dispersion. Photoluminescence spectroscopy, transmission electron microscopy and dynamic light scattering studies revealed that subtle changes in the reaction conditions lead to significant changes in the particle morphology and associated optical properties, often with catastrophic consequences on stability. This study highlights the importance of designing PNC dispersions in order to make more efficient and reliable optoelectronic devices.
- 27 February 2020
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 32 (6) , 2282-2291
Phase Behavior and Substitution Limit of Mixed Cesium-Formamidinium Lead Triiodide Perovskites
- 27 February 2020
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 32 (6) , 2282-2291
Phase Behavior and Substitution Limit of Mixed Cesium-Formamidinium Lead Triiodide Perovskites
- 24 January 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 124 (6) , 3448-3458
Phase Diagram of Methylammonium/Formamidinium Lead Iodide Perovskite Solid Solutions from Temperature-Dependent Photoluminescence and Raman Spectroscopies
- 24 January 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 124 (6) , 3448-3458
Phase Diagram of Methylammonium/Formamidinium Lead Iodide Perovskite Solid Solutions from Temperature-Dependent Photoluminescence and Raman Spectroscopies
- 30 September 2019
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 37 (6) , 062901
Spectroscopic ellipsometry study of FAxMA1−xPbI3 hybrid perovskite single crystals
Organic-inorganic hybrid perovskites have the generic formula ABX3, where X denotes a halide anion and A and B stand for an organic and a metal cation, respectively. These hybrid compounds are semiconductors with highly interesting and tunable properties. They are the subject of intense research for several applications, mainly in solar cells but also as light-emitting diodes and lasers. Tunability of the optical properties may be accomplished by site-substituted solid solutions in A, B, or X sites. In particular, some mixed-cation systems show increased stability for these applications. In this work, the authors report on the variation of the optical constants in mixed A-site cation methylammonium/formamidinium (MA/FA) lead iodide perovskites FAxMA1−xPbI3 evaluated by spectroscopic ellipsometry in single crystal samples. The two main polymorphs of FAPbI3 are measured. The study is complemented by photoluminescence measurements to gain a better insight into observed spectroscopic features related to the electronic interband transitions of the crystals and their structural integrity. The main result is a continuous variation of the pseudocubic perovskite band structure of the solid solutions between the two end compounds MAPbI3 and α-FAPbI3.
- 30 September 2019
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 37 (6) , 062901
Spectroscopic ellipsometry study of FAxMA1−xPbI3 hybrid perovskite single crystals
Organic-inorganic hybrid perovskites have the generic formula ABX3, where X denotes a halide anion and A and B stand for an organic and a metal cation, respectively. These hybrid compounds are semiconductors with highly interesting and tunable properties. They are the subject of intense research for several applications, mainly in solar cells but also as light-emitting diodes and lasers. Tunability of the optical properties may be accomplished by site-substituted solid solutions in A, B, or X sites. In particular, some mixed-cation systems show increased stability for these applications. In this work, the authors report on the variation of the optical constants in mixed A-site cation methylammonium/formamidinium (MA/FA) lead iodide perovskites FAxMA1−xPbI3 evaluated by spectroscopic ellipsometry in single crystal samples. The two main polymorphs of FAPbI3 are measured. The study is complemented by photoluminescence measurements to gain a better insight into observed spectroscopic features related to the electronic interband transitions of the crystals and their structural integrity. The main result is a continuous variation of the pseudocubic perovskite band structure of the solid solutions between the two end compounds MAPbI3 and α-FAPbI3.
- 15 May 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 10 (11) , 2971-2977
Equal Footing of Thermal Expansion and Electron–Phonon Interaction in the Temperature Dependence of Lead Halide Perovskite Band Gaps
Lead halide perovskites, which are causing a paradigm shift in photovoltaics, exhibit an atypical temperature dependence of the fundamental gap: it decreases in energy with decreasing temperature. Reports ascribe such a behavior to a strong electron-phonon renormalization of the gap, neglecting contributions from thermal expansion. However, high pressure experiments performed on the archetypal perovskite MAPbI3 (MA stands for methylammonium) yield a negative pressure coefficient for the gap of the tetragonal room-temperature phase, which speaks against the assumption of negligible thermal expansion effects. Here we show that for MAPbI3 the temperature-induced gap renormalization due to electron-phonon interaction can only account for about 40% of the total energy shift, thus implying thermal expansion to be more if not as important as electron-phonon coupling. Furthermore, this result possesses general validity, holding also for the tetragonal or cubic phase, stable at ambient conditions, of most halide perovskite counterparts.
- 15 May 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 10 (11) , 2971-2977
Equal Footing of Thermal Expansion and Electron–Phonon Interaction in the Temperature Dependence of Lead Halide Perovskite Band Gaps
Lead halide perovskites, which are causing a paradigm shift in photovoltaics, exhibit an atypical temperature dependence of the fundamental gap: it decreases in energy with decreasing temperature. Reports ascribe such a behavior to a strong electron-phonon renormalization of the gap, neglecting contributions from thermal expansion. However, high pressure experiments performed on the archetypal perovskite MAPbI3 (MA stands for methylammonium) yield a negative pressure coefficient for the gap of the tetragonal room-temperature phase, which speaks against the assumption of negligible thermal expansion effects. Here we show that for MAPbI3 the temperature-induced gap renormalization due to electron-phonon interaction can only account for about 40% of the total energy shift, thus implying thermal expansion to be more if not as important as electron-phonon coupling. Furthermore, this result possesses general validity, holding also for the tetragonal or cubic phase, stable at ambient conditions, of most halide perovskite counterparts.
- 5 September 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 122 (38) , 22073-22082
Pressure-Induced Locking of Methylammonium Cations versus Amorphization in Hybrid Lead Iodide Perovskites
- 5 September 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 122 (38) , 22073-22082
Pressure-Induced Locking of Methylammonium Cations versus Amorphization in Hybrid Lead Iodide Perovskites