Zewen Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zewen Wang has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Jinhua She
School of Engineering, Tokyo University of Technology, 1404-1 Katakuramachi, Hachioji, Tokyo 192-0982, Japan
6 shared publications - Seiichi Kawata
School of Automation, China University of Geosciences, Wuhan, China
2 shared publications - Yue Jing
School of Automation, China University of Geosciences, 388 Lumo Road, Hongshan, Wuhan 430074, China
2 shared publications - Daiki Sato
Institute of Integrated Research (IIR), Institute of Science Tokyo
1 shared publication Editorial Office
1 shared publication- Guang-Jun Wang
School of Automation, China University of Geosciences, Wuhan, China
1 shared publication
Latest Publications
- 15 February 2026
- Published by Springer Nature
- p. 204-215
PID Control with Pedal Torque Estimation for Safety Monitoring in Lower-Limb Rehabilitation Robots
- 15 February 2026
- Published by Springer Nature
- p. 204-215
PID Control with Pedal Torque Estimation for Safety Monitoring in Lower-Limb Rehabilitation Robots
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (5) , 7631-7642
Adaptive Equivalent-Input-Disturbance Approach for Active Noise Control in Acoustic Ducts
This article presents an adaptive modified equivalent-input-disturbance (AMEID) approach for feedback active noise control (ANC) to enhance low-frequency noise rejection. The key idea is to represent low-frequency noise as an equivalent input disturbance (EID) and suppress it through feedback control. The AMEID framework consists of two components. The first is a model-based component that embeds an internal model of the expected EID dynamics to ensure convergence. The second is a data-driven component that improves disturbance-rejection performance. Controller synthesis is performed by solving two discrete-time algebraic Riccati equations subject to a robust stability condition. Compared with conventional model-based EID and data-driven ANC schemes, the AMEID approach achieves faster transient response and greater robustness. Experimental results verify the effectiveness and superiority of the approach.
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (5) , 7631-7642
Adaptive Equivalent-Input-Disturbance Approach for Active Noise Control in Acoustic Ducts
This article presents an adaptive modified equivalent-input-disturbance (AMEID) approach for feedback active noise control (ANC) to enhance low-frequency noise rejection. The key idea is to represent low-frequency noise as an equivalent input disturbance (EID) and suppress it through feedback control. The AMEID framework consists of two components. The first is a model-based component that embeds an internal model of the expected EID dynamics to ensure convergence. The second is a data-driven component that improves disturbance-rejection performance. Controller synthesis is performed by solving two discrete-time algebraic Riccati equations subject to a robust stability condition. Compared with conventional model-based EID and data-driven ANC schemes, the AMEID approach achieves faster transient response and greater robustness. Experimental results verify the effectiveness and superiority of the approach.
- 20 November 2025
- Published by Fuji Technology Press Ltd. in Journal of Advanced Computational Intelligence and Intelligent Informatics
- Vol. 29 (6) , 1517-1529
A PID Control System for Lower-Limb Rehabilitation Robot with a Function for Pedal Torque Estimation
This article presents a proportional integral derivative (PID) control system for lower-limb rehabilitation robot that not only features satisfactory control performance for the pedal angle but also provides a function for pedal torque estimation. Nonlinear state feedback simplifies the stability analysis and control system design. The stability condition of the closed-loop system is derived based on a Lyapunov function. The PID controller ensures that the pedal angle tracks the reference trajectory. The equivalent input disturbance (EID) method in the control system was compared with the disturbance observer (DOB) and extended state observer (ESO) methods in terms of pedal torque estimation performance. The simulation results indicated that the EID method achieved a root mean square error of 0.37 N·m with 47.6% and 51.8% improvements over the DOB and ESO methods.
- 20 November 2025
- Published by Fuji Technology Press Ltd. in Journal of Advanced Computational Intelligence and Intelligent Informatics
- Vol. 29 (6) , 1517-1529
A PID Control System for Lower-Limb Rehabilitation Robot with a Function for Pedal Torque Estimation
This article presents a proportional integral derivative (PID) control system for lower-limb rehabilitation robot that not only features satisfactory control performance for the pedal angle but also provides a function for pedal torque estimation. Nonlinear state feedback simplifies the stability analysis and control system design. The stability condition of the closed-loop system is derived based on a Lyapunov function. The PID controller ensures that the pedal angle tracks the reference trajectory. The equivalent input disturbance (EID) method in the control system was compared with the disturbance observer (DOB) and extended state observer (ESO) methods in terms of pedal torque estimation performance. The simulation results indicated that the EID method achieved a root mean square error of 0.37 N·m with 47.6% and 51.8% improvements over the DOB and ESO methods.
- 11 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 21 (3) , 2134-2143
Robust Disturbance-Rejection Design for Systems With Uncertainties, Disturbances, and Noise
This article presents a robust modified equivalent input disturbance (RMEID) design algorithm that effectively attenuates the effects of uncertainties and disturbances on the control output while considering the measurement noise. A robust disturbance-rejection framework is presented including a modified equivalent input disturbance (MEID) estimation and a robust feedback. The MEID approach estimates an equivalent input disturbance (EID) in two steps: Obtaining a prior disturbance estimate and updating the prior disturbance estimate to obtain a posteriori disturbance estimate. Since the MEID compensation for the EID cannot guarantee the stability of a control system, a robust feedback control law is used to stabilize a control system with the MEID-based compensation. The parameters of the RMEID-based control system are obtained by solving linear matrix inequalities, which are derived based on a stability condition and a performance condition. The effectiveness of the approach are demonstrated through a case study involving a mechatronic control system. A comparative analysis with a robust improved equivalent-input-disturbance approach validates the superiority of the RMEID approach.
- 11 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 21 (3) , 2134-2143
Robust Disturbance-Rejection Design for Systems With Uncertainties, Disturbances, and Noise
This article presents a robust modified equivalent input disturbance (RMEID) design algorithm that effectively attenuates the effects of uncertainties and disturbances on the control output while considering the measurement noise. A robust disturbance-rejection framework is presented including a modified equivalent input disturbance (MEID) estimation and a robust feedback. The MEID approach estimates an equivalent input disturbance (EID) in two steps: Obtaining a prior disturbance estimate and updating the prior disturbance estimate to obtain a posteriori disturbance estimate. Since the MEID compensation for the EID cannot guarantee the stability of a control system, a robust feedback control law is used to stabilize a control system with the MEID-based compensation. The parameters of the RMEID-based control system are obtained by solving linear matrix inequalities, which are derived based on a stability condition and a performance condition. The effectiveness of the approach are demonstrated through a case study involving a mechatronic control system. A comparative analysis with a robust improved equivalent-input-disturbance approach validates the superiority of the RMEID approach.
- 28 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (1) , 673-683
Modified Equivalent-Input-Disturbance Approach to Improving Disturbance-Rejection Performance
This article presents a modified equivalent-input-disturbance (MEID) approach that actively rejects exogenous disturbances. A dynamic compensator is newly introduced in a conventional equivalent-input-disturbance (EID) estimator to further suppress the disturbances. The mechanism of the MEID approach to improving disturbance rejection is analyzed based on the transfer characteristic from the EID to the output of the system, and a stability condition of the MEID control system is presented and is used to design the parameters of the system. A comparison with the conventional EID approach and the disturbance-observer method through experiments demonstrates the validity of the presented method.
- 28 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (1) , 673-683
Modified Equivalent-Input-Disturbance Approach to Improving Disturbance-Rejection Performance
This article presents a modified equivalent-input-disturbance (MEID) approach that actively rejects exogenous disturbances. A dynamic compensator is newly introduced in a conventional equivalent-input-disturbance (EID) estimator to further suppress the disturbances. The mechanism of the MEID approach to improving disturbance rejection is analyzed based on the transfer characteristic from the EID to the output of the system, and a stability condition of the MEID control system is presented and is used to design the parameters of the system. A comparison with the conventional EID approach and the disturbance-observer method through experiments demonstrates the validity of the presented method.
- 22 May 2020
- Published by Springer Nature in International Journal of Automation and Computing
- Vol. 17 (5) , 701-712
Adaptive Equivalent-input-disturbance Approach to Improving Disturbance-rejection Performance
- 22 May 2020
- Published by Springer Nature in International Journal of Automation and Computing
- Vol. 17 (5) , 701-712
Adaptive Equivalent-input-disturbance Approach to Improving Disturbance-rejection Performance