Sarah Schmidt
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sarah Schmidt has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- David Laner
Center for Resource Management and Solid Waste Engineering, Faculty of Civil and Environmental Engineering, University of Kassel, Mönchebergstraße 7, 34125 Kassel, Germany
9 shared publications David Laner
Center for Resource Management and Solid Waste Engineering, Institute of Water, Waste and Environmental Engineering, University of Kassel, 34125 Kassel, Germany
3 shared publications- Thomas Gibon
Luxembourg Institute of Science and Technology, Esch-sur-Alzette, Luxembourg
3 shared publications - Xavier-François Verni
SUSTAIN research unit, Luxembourg Institute of Science and Technology (LIST), 5 avenue des Hauts-Fourneaux, 4362 Esch-sur-Alzette, Luxembourg
3 shared publications - A.S. Varling
Department of Environmental and Resource Engineering, Technical University of Denmark, Bygningstorvet 115, 2800 Kongens Lyngby, Denmark
1 shared publication Arno Biwer
Luxembourg Institute of Science & Technology, Belvaux, Luxemburg
1 shared publication
Latest Publications
- Open Access
- 9 October 2025
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 225
Plastic and contaminant flow dynamics in the German building and infrastructure sector: Current and future challenges and opportunities for recycling
- 9 October 2025
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 225
Open AccessPlastic and contaminant flow dynamics in the German building and infrastructure sector: Current and future challenges and opportunities for recycling
- Open Access
- 3 July 2025
- Published by Elsevier in Waste Management
- Vol. 205, 114974
Environmental performance of management scenarios for urban bio-waste: A German case study on the role of sources and pathways
- 3 July 2025
- Published by Elsevier in Waste Management
- Vol. 205, 114974
Open AccessEnvironmental performance of management scenarios for urban bio-waste: A German case study on the role of sources and pathways
- Open Access
- 15 May 2025
- Published by Elsevier in Data in Brief
- Vol. 60, 111654
Plastics in the German building and infrastructure sector: A high-resolution dataset on historical flows, stocks, and legacy substance contamination
- 15 May 2025
- Published by Elsevier in Data in Brief
- Vol. 60, 111654
Open AccessPlastics in the German building and infrastructure sector: A high-resolution dataset on historical flows, stocks, and legacy substance contamination
- Open Access
- 5 March 2025
- Published by Elsevier in Waste Management
- Vol. 198, 137-150
Reducing the climate impact of residual waste treatment: A German case study on carbon management strategies
- 5 March 2025
- Published by Elsevier in Waste Management
- Vol. 198, 137-150
Open AccessReducing the climate impact of residual waste treatment: A German case study on carbon management strategies
- Open Access
- 9 October 2024
- Published by Springer Nature in Journal of Industrial Ecology
- Vol. 28 (6) , 1755-1770
The environmental costs of clean cycles: Quantitative analysis for the case of PVC window profile recycling in Germany
Recycling schemes for long‐lived products are challenged by the presence of “legacy substances,” which have been used in production in the past, but are nowadays classified as substances of concern. This study quantitatively evaluates the trade‐offs between phasing out legacy substances, increasing circularity levels, and reducing life cycle impacts of polyvinylchloride (PVC) window profiles recycling in Germany based on a comprehensive dynamic material and substance flow analysis coupled with a prospective life cycle assessment. Scenario results indicate that although lead had been phased out in virgin PVC by 2015, lead concentrations in end‐of‐life PVC window profiles will remain above 0.3% until the end of the century without a restriction of lead in recycled PVC and will be by factor 3–5 higher compared to a restriction as stipulated by EU 2023/923. However, the latter is associated with lower recycling rates and higher life cycle environmental impacts of PVC window frame waste management, which cannot be fully compensated by the introduction of new waste treatment pathways using currently available technologies. The study serves to introduce a new comprehensive modeling framework, which allows for the consideration of trade‐offs between substance, material, and environmental impact dimensions as a basis for discussing and developing sustainable waste management strategies.
- 9 October 2024
- Published by Springer Nature in Journal of Industrial Ecology
- Vol. 28 (6) , 1755-1770
Open AccessThe environmental costs of clean cycles: Quantitative analysis for the case of PVC window profile recycling in Germany
Recycling schemes for long‐lived products are challenged by the presence of “legacy substances,” which have been used in production in the past, but are nowadays classified as substances of concern. This study quantitatively evaluates the trade‐offs between phasing out legacy substances, increasing circularity levels, and reducing life cycle impacts of polyvinylchloride (PVC) window profiles recycling in Germany based on a comprehensive dynamic material and substance flow analysis coupled with a prospective life cycle assessment. Scenario results indicate that although lead had been phased out in virgin PVC by 2015, lead concentrations in end‐of‐life PVC window profiles will remain above 0.3% until the end of the century without a restriction of lead in recycled PVC and will be by factor 3–5 higher compared to a restriction as stipulated by EU 2023/923. However, the latter is associated with lower recycling rates and higher life cycle environmental impacts of PVC window frame waste management, which cannot be fully compensated by the introduction of new waste treatment pathways using currently available technologies. The study serves to introduce a new comprehensive modeling framework, which allows for the consideration of trade‐offs between substance, material, and environmental impact dimensions as a basis for discussing and developing sustainable waste management strategies.
- Open Access
- 7 October 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (42) , 18686-18700
Increasing the Recycling of PVC Flooring Requires Phthalate Removal for Ensuring Consumers’ Safety: A Cross-Checked Substance Flow Analysis of Plasticizers for Switzerland
As our planet grapples with the severe repercussions of plastic pollution, mechanical recycling has been proposed as a potential remedy. However, increasing mechanical recycling may have unintended negative consequences. For example, recycling of PVC flooring containing hazardous plasticizers that were used in the past may lead to continued exposure. Here we propose measures to increase recycling while circumventing adverse health impacts caused by legacy additives. For this, we conduct a dynamic substance flow analysis for Switzerland and the time period from 1950 to 2100, focusing on three plasticizers: di(2-ethylhexyl) phthalate (DEHP), diisononyl phthalate (DiNP), and di(2-ethylhexyl) terephthalate (DEHT). We quantify the uncertainty of results, check their plausibility against measured concentrations in samples representative for the Swiss market, and compare them with modeled substance flows in Germany. Based on the cross-checked model, future average concentrations of DEHP in PVC flooring on the Swiss market are expected to be above the legal limit of 0.1 wt % for several decades if increased recycling rates are implemented without additional measures. Phasing out the potentially concerning DiNP, too, and preventing phthalates from entering recycling would lower their average market concentrations to values below 0.1 wt % and enable increasing recycling rates without compromising product safety. Analogous measures could help achieve this goal across other European countries and product groups.
- 7 October 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (42) , 18686-18700
Open AccessIncreasing the Recycling of PVC Flooring Requires Phthalate Removal for Ensuring Consumers’ Safety: A Cross-Checked Substance Flow Analysis of Plasticizers for Switzerland
As our planet grapples with the severe repercussions of plastic pollution, mechanical recycling has been proposed as a potential remedy. However, increasing mechanical recycling may have unintended negative consequences. For example, recycling of PVC flooring containing hazardous plasticizers that were used in the past may lead to continued exposure. Here we propose measures to increase recycling while circumventing adverse health impacts caused by legacy additives. For this, we conduct a dynamic substance flow analysis for Switzerland and the time period from 1950 to 2100, focusing on three plasticizers: di(2-ethylhexyl) phthalate (DEHP), diisononyl phthalate (DiNP), and di(2-ethylhexyl) terephthalate (DEHT). We quantify the uncertainty of results, check their plausibility against measured concentrations in samples representative for the Swiss market, and compare them with modeled substance flows in Germany. Based on the cross-checked model, future average concentrations of DEHP in PVC flooring on the Swiss market are expected to be above the legal limit of 0.1 wt % for several decades if increased recycling rates are implemented without additional measures. Phasing out the potentially concerning DiNP, too, and preventing phthalates from entering recycling would lower their average market concentrations to values below 0.1 wt % and enable increasing recycling rates without compromising product safety. Analogous measures could help achieve this goal across other European countries and product groups.
- Open Access
- 22 July 2024
- Published by Springer Nature in Österreichische Wasser- und Abfallwirtschaft
- Vol. 76 (9-10) , 382-392
Schadstoffbedingte Herausforderungen für PVC-Kreisläufe im Bausektor in Deutschland
Zusammenfassung: Etwa drei Viertel des in Deutschland verarbeiteten Polyvinylchlorids (PVC) wird zu Bauprodukten verarbeitet. Aufgrund langer Produktlebensdauern sind die PVC-Abfallmengen aus diesem Sektor aktuell deutlich geringer als die Verarbeitungsmengen. Langfristig ist jedoch mit einem Anstieg der Abfallmengen zu rechnen. Die langen Produktlebensdauern haben auch zur Folge, dass PVC-Abfälle aus dem Bausektor Stoffe enthalten können, die vor mehreren Jahren oder Jahrzehnten in der PVC-Produktion eingesetzt wurden, inzwischen jedoch als problematisch eingestuft sind. Ziel der vorliegenden Studie ist es, schadstoffbedingte Herausforderungen für PVC-Kreisläufe im Bausektor in Deutschland zu identifizieren und anhand eines dynamischen Materialflussmodells zu quantifizieren. Das Materialflussmodell basiert auf einer Analyse regulatorischer Rahmenbedingungen, Literatur- und Datenrecherchen sowie Abfallcharakterisierungen. Anhand der Analyse regulatorischer Rahmenbedingungen wurden etwa 680 Stoffe identifiziert, die in PVC-Anwendungen im Bausektor eingesetzt wurden und werden. Der Einsatz von 188 dieser Stoffe wird durch die EU-POP-Verordnung, REACH oder CLP-Verordnung reguliert. Eine Abfallanalyse ergibt, dass PVC-Altprodukte aus dem Bausektor relevante Konzentrationen an Problemstoffen, wie Blei, Cadmium und DEHP aufweisen. Anhand des dynamischen Materialflussmodells wird für die Anwendungen Profile, Rohre und Bodenbeläge gezeigt, dass derzeit ein Nutzlager von etwa 19,0 Mio. Tonnen PVC besteht. Bis 2050 ist zu erwarten, dass die PVC-Abfälle aus diesen Anwendungen von 246.000 t im Jahr 2022 auf 449.000 t steigen werden. Außerdem zeigt das Materialflussmodell, dass PVC-Abfälle aus dem Bausektor mit hoher Wahrscheinlichkeit auch im Jahr 2050 noch relevante Konzentrationen an Problemstoffen enthalten werden. Um zukünftig eine stoffliche Verwertung dieser Abfälle sowie die Etablierung sauberer Materialkreisläufe zu ermöglichen, sind neue Abfallbehandlungsverfahren notwendig, die auf das Ausschleusen der Schadstoffe abzielen, sodass steigende Recyclingmengenpotenziale ausgeschöpft werden können.
- 22 July 2024
- Published by Springer Nature in Österreichische Wasser- und Abfallwirtschaft
- Vol. 76 (9-10) , 382-392
Open AccessSchadstoffbedingte Herausforderungen für PVC-Kreisläufe im Bausektor in Deutschland
Zusammenfassung: Etwa drei Viertel des in Deutschland verarbeiteten Polyvinylchlorids (PVC) wird zu Bauprodukten verarbeitet. Aufgrund langer Produktlebensdauern sind die PVC-Abfallmengen aus diesem Sektor aktuell deutlich geringer als die Verarbeitungsmengen. Langfristig ist jedoch mit einem Anstieg der Abfallmengen zu rechnen. Die langen Produktlebensdauern haben auch zur Folge, dass PVC-Abfälle aus dem Bausektor Stoffe enthalten können, die vor mehreren Jahren oder Jahrzehnten in der PVC-Produktion eingesetzt wurden, inzwischen jedoch als problematisch eingestuft sind. Ziel der vorliegenden Studie ist es, schadstoffbedingte Herausforderungen für PVC-Kreisläufe im Bausektor in Deutschland zu identifizieren und anhand eines dynamischen Materialflussmodells zu quantifizieren. Das Materialflussmodell basiert auf einer Analyse regulatorischer Rahmenbedingungen, Literatur- und Datenrecherchen sowie Abfallcharakterisierungen. Anhand der Analyse regulatorischer Rahmenbedingungen wurden etwa 680 Stoffe identifiziert, die in PVC-Anwendungen im Bausektor eingesetzt wurden und werden. Der Einsatz von 188 dieser Stoffe wird durch die EU-POP-Verordnung, REACH oder CLP-Verordnung reguliert. Eine Abfallanalyse ergibt, dass PVC-Altprodukte aus dem Bausektor relevante Konzentrationen an Problemstoffen, wie Blei, Cadmium und DEHP aufweisen. Anhand des dynamischen Materialflussmodells wird für die Anwendungen Profile, Rohre und Bodenbeläge gezeigt, dass derzeit ein Nutzlager von etwa 19,0 Mio. Tonnen PVC besteht. Bis 2050 ist zu erwarten, dass die PVC-Abfälle aus diesen Anwendungen von 246.000 t im Jahr 2022 auf 449.000 t steigen werden. Außerdem zeigt das Materialflussmodell, dass PVC-Abfälle aus dem Bausektor mit hoher Wahrscheinlichkeit auch im Jahr 2050 noch relevante Konzentrationen an Problemstoffen enthalten werden. Um zukünftig eine stoffliche Verwertung dieser Abfälle sowie die Etablierung sauberer Materialkreisläufe zu ermöglichen, sind neue Abfallbehandlungsverfahren notwendig, die auf das Ausschleusen der Schadstoffe abzielen, sodass steigende Recyclingmengenpotenziale ausgeschöpft werden können.
- Open Access
- 27 November 2023
- Published by Elsevier in Waste Management
- Vol. 174, 53-75
Waste LCA and the future
- 27 November 2023
- Published by Elsevier in Waste Management
- Vol. 174, 53-75
Open AccessWaste LCA and the future
- Open Access
- 28 July 2023
- Published by Springer Nature in Journal of Industrial Ecology
- Vol. 27 (6) , 1447-1460
The environmental performance of plastic packaging waste management in Germany: Current and future key factors
Plastic is a popular packaging material, but also criticized as a symbol for the make‐use‐dispose economy because of its short lifespan, its dependency on fossil fuels, and its potential contribution to marine litter. To identify current and potential future key factors for the environmental performance of plastic packaging waste (PPW) management in Germany, a life cycle assessment considering five different pathways of PPW (including deposit‐refund systems, separately collected lightweight packaging waste, and treatment of non‐source‐separated residual waste) was performed. The analysis related to the year 2017 and also considered prospective changes in the background system until 2050 by adapting inventories to shared socioeconomic pathways in line with the Paris Agreement. Key factors for the environmental performance were determined by perturbation analysis. Source separation, quality and quantity of recycled plastics, and emissions from the thermal utilization of residues were identified as key factors for the environmental performance of PPW management. While benefits of PPW management are expected to decrease due to prospective system changes, source separation and the separation of plastics from residual waste gain in importance. Potential measures for improving the environmental performance should focus on long‐term key factors, especially separating PPW from the residual waste (in households or in waste treatment facilities) as well as increasing the quantities and qualities of recycled plastics. The present study showed that the evaluation of system performance in view of changing boundary conditions is key to identify optimal configurations of future PPW management.
- 28 July 2023
- Published by Springer Nature in Journal of Industrial Ecology
- Vol. 27 (6) , 1447-1460
Open AccessThe environmental performance of plastic packaging waste management in Germany: Current and future key factors
Plastic is a popular packaging material, but also criticized as a symbol for the make‐use‐dispose economy because of its short lifespan, its dependency on fossil fuels, and its potential contribution to marine litter. To identify current and potential future key factors for the environmental performance of plastic packaging waste (PPW) management in Germany, a life cycle assessment considering five different pathways of PPW (including deposit‐refund systems, separately collected lightweight packaging waste, and treatment of non‐source‐separated residual waste) was performed. The analysis related to the year 2017 and also considered prospective changes in the background system until 2050 by adapting inventories to shared socioeconomic pathways in line with the Paris Agreement. Key factors for the environmental performance were determined by perturbation analysis. Source separation, quality and quantity of recycled plastics, and emissions from the thermal utilization of residues were identified as key factors for the environmental performance of PPW management. While benefits of PPW management are expected to decrease due to prospective system changes, source separation and the separation of plastics from residual waste gain in importance. Potential measures for improving the environmental performance should focus on long‐term key factors, especially separating PPW from the residual waste (in households or in waste treatment facilities) as well as increasing the quantities and qualities of recycled plastics. The present study showed that the evaluation of system performance in view of changing boundary conditions is key to identify optimal configurations of future PPW management.